- 27 Jan, 2015 28 commits
-
-
Fabio Estevam authored
There is no need to jump to the 'err' label as we can simply return the error code directly and make the code shorter. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Dan Carpenter authored
The "i" variable is used as an offset into both the dev->vfd[] and the dev->devtype->vdevs[] arrays. The second array is smaller so we should use that as a limit instead of ARRAY_SIZE(dev->vfd). Also the original check was off by one. We should use a format string as well in case the ->name has any funny characters and also to stop static checkers from complaining. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ondrej Zary authored
Improve g_tuner and add s_hw_freq_seek and enum_freq_bands support for cards with TEA575x radio. This allows signal/stereo detection and HW seek to work on these cards. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Split ioctl interface from enum_freq_bands, g_tuner and s_hw_freq_seek functions and export them to be used in other drivers like bttv. Signed-off-by:
-
Ondrej Zary authored
Remove tea575x-specific code from bttv and use the common driver instead. Only set_frequency is implemented (signal/stereo detection or seek would require more changes to bttv). It works fine on Video Highway Xtreme (it actually makes the radio usable as it currently cannot be tuned properly). Miro/Pinnacle is untested but seems to be simple and should work. However, I don't understand the Terratec Active Radio Upgrade code. The HW seems to need IOR, IOW and CSEL signals that were taken from ISA bus on older cards (IOR and IOW directly and CSEL from some address decoder) and are emulated here using GPIOs. But the code manipulating these signals in bttv seems to be broken - it never asserts the IOR signal. If anyone has this HW, please test if I got that right. Signed-off-by:
-
Wolfram Sang authored
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Rickard Strandqvist authored
Remove the function pvr2_hdw_cmd_powerdown() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Rickard Strandqvist authored
Removes some functions that are not used anywhere: test_read() edid_read_block() dpp_write() dpp_read() esdp_write() esdp_read() cec_write_clr_set() This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
-
Rickard Strandqvist authored
Remove the function vsp1_hsit_read() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Rickard Strandqvist authored
Remove the function saa7134_queue() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
-
Rickard Strandqvist authored
Remove the function write_eeprom_byte() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
-
Rickard Strandqvist authored
Removes some functions that are not used anywhere: vblanking() hblanking() This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
-
Fabian Frederick authored
Based on versioncheck. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Based on versioncheck. Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> The semantic patch also changes the cast to long to a cast to unsigned long in the data initializer, as unsigned long is the type of the data field. Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by:
-
Julia Lawall authored
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -t.function = f; -t.data = d; -init_timer(&t); +setup_timer(&t,f,d); // </smpl> Signed-off-by:
-
Ismael Luceno authored
s/uint8_t/u8/ Signed-off-by:
Ismael Luceno <ismael@iodev.co.uk> Signed-off-by:
-
Ismael Luceno authored
s/unsigned short/u16/ Signed-off-by:
-
Ismael Luceno authored
s/unsigned short/u16/ Signed-off-by:
-
Ismael Luceno authored
s/unsigned char/u8/ Signed-off-by:
-
Hans Verkuil authored
The videobuf_dma_init* and videobuf_dma_map() functions are no longer used except in videobuf-dma-sg.c itself. Make them static. These functions were abused in various drivers. All those drivers have now been fixed, so by no longer exporting these functions future abuse is now prevented. Signed-off-by:
-
Rickard Strandqvist authored
Remove the function fm_rx_get_rds_system() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
-
Prabhakar Lad authored
this patch drops duplicate dependency of HAS_DMA from VIDEO_SH_VEU. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Asaf Vertz authored
To be future-proof and for better readability the time comparisons are modified to use time_after() instead of plain, error-prone math. Signed-off-by:
Asaf Vertz <asaf.vertz@tandemg.com> Signed-off-by:
-
Fabio Estevam authored
As mx53 is a dt-only architecture we can safely remove its entry from the coda_platform_ids[] structure. Signed-off-by:
-
Mauro Carvalho Chehab authored
This is needed in order to get the media fixes applied on -rc6. Linux 3.19-rc6 * tag 'v3.19-rc6': (891 commits) Linux 3.19-rc6 dm: fix handling of multiple internal suspends hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro hwmon: (i5500_temp) Convert to module_pci_driver hwmon: (i5500_temp) Don't bind to disabled sensors hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets arm64: dts: add baud rate to Juno stdout-path Revert "platform: x86: dell-laptop: Add support for keyboard backlight" Revert "Documentation: Add entry for dell-laptop sysfs interface" dm cache: fix problematic dual use of a single migration count variable dm cache: share cache-metadata object across inactive and active DM tables of/unittest: Overlays with sub-devices tests KVM: x86: SYSENTER emulation is broken KVM: x86: Fix of previously incomplete fix for CVE-2014-8480 arm64: dump: Fix implicit inclusion of definition for PCI_IOBASE x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" ... Conflicts: drivers/media/pci/cx23885/cx23885.h
-
- 26 Jan, 2015 11 commits
-
-
Mauro Carvalho Chehab authored
The debug parameter is not used anymore, as this module was converted already to use dev_dbg(). Signed-off-by: -
Jurgen Kramer authored
Increase si2168 cmd execute timeout to prevent firmware load failures. Tests shows it takes up to 52ms to load the 'dvb-demod-si2168-a30-01.fw' firmware. Increase timeout to a safe value of 70ms. Signed-off-by:
Jurgen Kramer <gtmkramer@xs4all.nl> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Benjamin Larsson authored
Signed-off-by:
Benjamin Larsson <benjamin@southpole.se> Reviewed-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Hopefully the last round of fixes for 3.19 - regression fix for the LDT changes - regression fix for XEN interrupt handling caused by the APIC changes - regression fixes for the PAT changes - last minute fixes for new the MPX support - regression fix for 32bit UP - fix for a long standing relocation issue on 64bit tagged for stable - functional fix for the Hyper-V clocksource tagged for stable - downgrade of a pr_err which tends to confuse users Looks a bit on the large side, but almost half of it are valuable comments" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" x86, tls, ldt: Stop checking lm in LDT_empty x86, mpx: Strictly enforce empty prctl() args x86, mpx: Fix potential performance issue on unmaps x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels x86, hyperv: Mark the Hyper-V clocksource as being continuous x86: Don't rely on VMWare emulating PAT MSR correctly x86, irq: Properly tag virtualization entry in /proc/interrupts x86, boot: Skip relocs when load address unchanged x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable() x86/xen: Treat SCI interrupt as normal GSI interrupt -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "From the irqchip departement you get: - regression fix for omap-intc - regression fix for atmel-aic-common - functional correctness fix for hip04 - type mismatch fix for gic-v3-its - proper error pointer check for mtd-sysirq Mostly one and two liners except for the omap regression fix which is slightly larger than desired" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type irqchip: omap-intc: Fix legacy DMA regression irqchip: gic-v3-its: Fix use of max with decimal constant irqchip: hip04: Initialize hip04_cpu_map to 0xffff irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A set of small fixes: - regression fix for exynos_mct clocksource - trivial build fix for kona clocksource - functional one liner fix for the sh_tmu clocksource - two validation fixes to prevent (root only) data corruption in the kernel via settimeofday and adjtimex. Tagged for stable" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: adjtimex: Validate the ADJ_FREQUENCY values time: settimeofday: Validate the values of tv from user clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast clocksource: kona: fix __iomem annotation clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A week's worth of fixes for various ARM platforms. Diff wise, the largest fix is for OMAP to deal with how GIC now registers interrupts (irq_domain_add_legacy() -> irq_domain_add_linear() changes). Besides this, a few more renesas platforms needed the GIC instatiation done for legacy boards. There's also a fix that disables coherency of mvebu due to issues, and a few other smaller fixes" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add baud rate to Juno stdout-path ARM: dts: imx25: Fix PWM "per" clocks bus: mvebu-mbus: fix support of MBus window 13 Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes ARM: mvebu: completely disable hardware I/O coherency ARM: OMAP: Work around hardcoded interrupts ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds arm: boot: dts: dra7: enable dwc3 suspend PHY quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "A couple of fixes - deadlock in CIFS and build breakage in cris serial driver (resurfaced f_dentry in there)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Convert file->f_dentry->d_inode to file_inode() fix deadlock in cifs_ioctl_clone()
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: "Two stable fixes for dm-cache and one 3.19 DM core fix: - fix potential for dm-cache metadata corruption via stale metadata buffers being used when switching an inactive cache table to active; this could occur due to each table having it's own bufio client rather than sharing the client between tables. - fix dm-cache target to properly account for discard IO while suspending otherwise IO quiescing could complete prematurely. - fix DM core's handling of multiple internal suspends by maintaining an 'internal_suspend_count' and only resuming the device when this count drops to zero" * tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix handling of multiple internal suspends dm cache: fix problematic dual use of a single migration count variable dm cache: share cache-metadata object across inactive and active DM tables -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull two block layer fixes from Jens Axboe: "Two small patches that should make it into 3.19: - a fixup from me for NVMe, making the cq_vector a signed variable. Otherwise our -1 comparison fails, and commit 2b25d981 doesn't do what it was supposed to. - a fixup for the hotplug handling for blk-mq from Ming Lei, using the proper kobject referencing to ensure we release resources at the right time" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: fix hctx/ctx kobject use-after-free NVMe: cq_vector should be signed
-
- 24 Jan, 2015 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
pULL SCSI fixes from James Bottomley: "This consists of four real fixes and three MAINTAINER updates. Three of the fixes are obvious (the DIX and atomic allocation are bug on and warn on fixes and the other is just trivial) and the ipr one is a bit more involved but is required because without it, the card double completes aborted commands and causes a kernel oops" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ibmvscsi driver maintainer change MAINTAINERS: ibmvfc driver maintainer change MAINTAINERS: Remove self as isci maintainer scsi_debug: test always evaluates to false, || should be used instead scsi: Avoid crashing if device uses DIX but adapter does not support it scsi_debug: use atomic allocation in resp_rsup_opcodes ipr: wait for aborted command responses
-
