- 22 Jul, 2012 40 commits
-
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
all we need it for is file->private_data, which is assign-once, already assigned by that point and, incidentally, its value is already in use by zoran ->mmap() anyway. So just store that pointer instead... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and keep the sodding requests on stack - they are small enough. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
d_instantiate(dentry, inode); unlock_new_inode(inode); is a bad idea; do it the other way round... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
locking/unlocking for rcu walk taken to a couple of inline helpers Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
really convoluted test in there has grown up during struct mount introduction; what it checks is that we'd reached the root of mount tree.
-
Eric Sandeen authored
Use the new custom EOF argument to generic_file_llseek_size so that SEEK_END will go to the max hash value for htree dirs in ext3 rather than to i_size_read() Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Eric Sandeen authored
Use the new functionality in generic_file_llseek_size() to accept a custom EOF position, and un-cut-and-paste all the vfs llseek code from ext4. Also fix up comments on ext4_llseek() to reflect reality. Signed-off-by:
Eric Sandeen <sandeen@redaht.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Eric Sandeen authored
For ext3/4 htree directories, using the vfs llseek function with SEEK_END goes to i_size like for any other file, but in reality we want the maximum possible hash value. Recent changes in ext4 have cut & pasted generic_file_llseek() back into fs/ext4/dir.c, but replicating this core code seems like a bad idea, especially since the copy has already diverged from the vfs. This patch updates generic_file_llseek_size to accept both a custom maximum offset, and a custom EOF position. With this in place, ext4_dir_llseek can pass in the appropriate maximum hash position for both maxsize and eof, and get what it wants. As far as I know, this does not fix any bugs - nfs in the kernel doesn't use SEEK_END, and I don't know of any user who does. But some ext4 folks seem keen on doing the right thing here, and I can't really argue. (Patch also fixes up some comments slightly) Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
wakeup_flusher_threads(0) will queue work doing complete writeback for each flusher thread. Thus there is not much point in submitting another work doing full inode WB_SYNC_NONE writeback by writeback_inodes_sb(). After this change it does not make sense to call nonblocking ->sync_fs and block device flush before calling sync_inodes_sb() because wakeup_flusher_threads() is completely asynchronous and thus these functions would be called in parallel with inode writeback running which will effectively void any work they do. So we move sync_inodes_sb() call before these two functions. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
It is not necessary to write block devices twice. The reason why we first did flush and then proper sync is that for_each_bdev() { write_bdev() wait_for_completion() } is much slower than for_each_bdev() write_bdev() for_each_bdev() wait_for_completion() when there is bigger amount of data. But as is seen in the above, there's no real need to scan pages and submit them twice. We just need to separate the submission and waiting part. This patch does that. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
In case block device does not have filesystem mounted on it, sys_sync will just ignore it and doesn't writeout its dirty pages. This is because writeback code avoids writing inodes from superblock without backing device and blockdev_superblock is such a superblock. Since it's unexpected that sync doesn't writeout dirty data for block devices be nice to users and change the behavior to do so. So now we iterate over all block devices on blockdev_super instead of iterating over all superblocks when syncing block devices. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
Change the order of operations during sync from for_each_sb { writeback_inodes_sb(); sync_fs(nowait); __sync_blockdev(nowait); } for_each_sb { sync_inodes_sb(); sync_fs(wait); __sync_blockdev(wait); } to for_each_sb writeback_inodes_sb(); for_each_sb sync_fs(nowait); for_each_sb __sync_blockdev(nowait); for_each_sb sync_inodes_sb(); for_each_sb sync_fs(wait); for_each_sb __sync_blockdev(wait); This is a preparation for the following patches in this series. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
Since the moment writes to quota files are using block device page cache and space for quota structures is reserved at the moment they are first accessed we have no reason to sync quota before inode writeback. In fact this order is now only harmful since quota information can easily change during inode writeback (either because conversion of delayed-allocated extents or simply because of allocation of new blocks for simple filesystems not using page_mkwrite). So move syncing of quota information after writeback of inodes into ->sync_fs method. This way we do not have to use ->quota_sync callback which is primarily intended for use by quotactl syscall anyway and we get rid of calling ->sync_fs() twice unnecessarily. We skip quota syncing for OCFS2 since it does proper quota journalling in all cases (unlike ext3, ext4, and reiserfs which also support legacy non-journalled quotas) and thus there are no dirty quota structures. CC: "Theodore Ts'o" <tytso@mit.edu> CC: Joel Becker <jlbec@evilplan.org> CC: reiserfs-devel@vger.kernel.org Acked-by:
Steven Whitehouse <swhiteho@redhat.com> Acked-by:
Dave Kleikamp <shaggy@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
Split off part of dquot_quota_sync() which writes dquots into a quota file to a separate function. In the next patch we will use the function from filesystems and we do not want to abuse ->quota_sync quotactl callback more than necessary. Acked-by:
Steven Whitehouse <swhiteho@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Jan Kara authored
In principle, a filesystem may want to have ->sync_fs() called during sync(1) although it does not have a bdi (i.e. s_bdi is set to noop_backing_dev_info). Only writeback code really needs bdi set to something reasonable. So move the checks where they are more logical. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
This patch makes UFS stop using the VFS '->write_super()' method along with the 's_dirt' superblock flag, because they are on their way out. The way we implement this is that we schedule a delay job instead relying on 's_dirt' and '->write_super()'. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblocks using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds, even if there are no diry superblocks, or there are no client file-systems which would need this (e.g., btrfs does not use '->write_super()'). So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super()' VFS service, and then remove it together with the kernel thread. Tested using fsstress from the LTP project. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
This patch does not do any functional changes. It only moves 3 functions in fs/ufs/super.c a little bit up in order to prepare for further changes where I'll need this new arrangement to avoid forward declarations. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
UFS calls 'ufs_write_super()' from 'ufs_put_super()' in order to write the superblocks to the media. However, it is not needed because VFS calls '->sync_fs()' before calling '->put_super()' - so by the time we are in 'ufs_write_super()', the superblocks are already synchronized. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
It does not look like sysv FS needs 'write_super()' at all, because all it does is a timestamp update. I cannot test this patch, because this file-system is so old and probably has not been used by anyone for years, so there are no tools to create it in Linux. But from the code I see that marking the superblock as dirty is basically marking the superblock buffers as drity and then setting the s_dirt flag. And when 'write_super()' is executed to handle the s_dirt flag, we just update the timestamp and again mark the superblock buffer as dirty. Seems pointless. It looks like we can update the timestamp more opprtunistically - on unmount or remount of sync, and nothing should change. Thus, this patch removes 'sysv_write_super()' and 's_dirt'. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
We do not need to call 'sysv_write_super()' from 'sysv_remount()', because VFS has called 'sysv_sync_fs()' before calling '->remount()'. So remove it. Remove also '(un)lock_super()' which obvioulsy is becoming useless in this function. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
We do not need to call 'sysv_write_super()' from 'sysv_put_super()', because VFS has called 'sysv_sync_fs()' before calling '->put_super()'. So remove it. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
This patch makes hfs stop using the VFS '->write_super()' method along with the 's_dirt' superblock flag, because they are on their way out. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblocks using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds, even if there are no diry superblocks, or there are no client file-systems which would need this (e.g., btrfs does not use '->write_super()'). So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super()' VFS service, and then remove it together with the kernel thread. Tested using fsstress from the LTP project. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
Add an 'sb' VFS superblock back-reference to the 'struct hfs_sb_info' data structure - we will need to find the VFS superblock from a 'struct hfs_sb_info' object in the next patch, so this change is jut a preparation. Remove few useless newlines while on it. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
We have the following pattern in 2 places in HFS if (!RDONLY) hfs_mdb_commit(); This patch pushes the RDONLY check down to 'hfs_mdb_commit()'. This will make the following patches a bit simpler. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
HFS calls 'hfs_write_super()' from 'hfs_put_super()' in order to write the MDB to the media. However, it is not needed because VFS calls '->sync_fs()' before calling '->put_super()' - so by the time we are in 'hfs_write_super()', the MDB is already synchronized. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
Stop using lock_super for serializing the MDB changes - use the buffer-head own lock instead. Tested with fsstress. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
HFS uses 'lock_super()'/'unlock_super()' around 'hfs_mdb_commit()' in order to serialize MDB (Master Directory Block) changes. Push it down to 'hfs_mdb_commit()' in order to simplify the code a bit. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
This patch makes hfsplus stop using the VFS '->write_super()' method along with the 's_dirt' superblock flag, because they are on their way out. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblocks using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds, even if there are no diry superblocks, or there are no client file-systems which would need this (e.g., btrfs does not use '->write_super()'). So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super()' VFS service, and then remove it together with the kernel thread. Tested using fsstress from the LTP project. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
This check is useless because we always have 'sb->s_fs_info' to be non-NULL. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
Print correct function name in the debugging print of the 'hfsplus_sync_fs()' function. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Artem Bityutskiy authored
... because it is used only in fs/hfsplus/super.c. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
recursion in __scm_destroy() will be cut by delaying final fput() Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and schedule_work() for interrupt/kernel_thread callers (and yes, now it *is* OK to call from interrupt). We are guaranteed that __fput() will be done before we return to userland (or exit). Note that for fput() from a kernel thread we get an async behaviour; it's almost always OK, but sometimes you might need to have __fput() completed before you do anything else. There are two mechanisms for that - a general barrier (flush_delayed_fput()) and explicit __fput_sync(). Both should be used with care (as was the case for fput() from kernel threads all along). See comments in fs/file_table.c for details. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
It doesn't matter on normal return to userland path (we'll recheck the NOTIFY_RESUME flag anyway), but in case of exit_task_work() we'll need that as soon as we get callbacks capable of triggering more task_work_add(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and get rid of PF_EXITING check in task_work_add(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-