Pcie registers may not be available in a virtualized
environment.
Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allows the user to force the supported pcie gen and lane
config on both the asic and the chipset.
Useful for debugging pcie problems and for virtualization
where we may not be able to query the pcie bridge caps.

Default to:
gen: chipset 1/2, asic 1/2/3
lanes: 1/2/4/8/16

v2: fix bare metal case
Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

displayport multistream fixes from AMD.

* 'drm-fixes-mst' of git://people.freedesktop.org/~airlied/linux:
  drm/dp/mst: deallocate payload on port destruction
  drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
  drm/dp/mst: move GUID storage from mgr, port to only mst branch
  drm/dp/mst: change MST detection scheme
  drm/dp/mst: Calculate MST PBN with 31.32 fixed point
  drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
  drm/mst: Add range check for max_payloads during init
  drm/mst: Don't ignore the MST PBN self-test result
  drm: fix missing reference counting decrease

This is needed to properly deallocate port payload
after downstream branch get unplugged.

In order to do this unplugged MST topology should
be preserved, to find first alive port on path to
unplugged MST topology, and send payload deallocation
request to branch device of found port.

For this mstb and port kref's are used in reversed
order to track when port and branch memory could be
freed.

Added additional functions to find appropriate mstb
as described above.
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

On DELL U3014 if you clear the table before enabling MST it sometimes
hangs the receiver.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Previous implementation does not handle case below: boot up one MST branch
to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output
of 1st MST, GUID is not created for 2nd MST branch. When downstream port of
2nd MST branch send upstream request, it fails because 2nd MST branch GUID
is not available.

New Implementation: only create GUID for MST branch and save it within Branch.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1. Get edid for all connected MST displays, not only on logical ports,
   in the same thread as MST topology detection is done:
     There are displays that have branches inside w/o logical ports.
     So in case another SST display connected downstream system can
     end-up in situation when 3 DOWN requests sent: two for
    ‘remote i2c read’ and one for ‘enum path resources’, making slots full.

2. Call notification callback in one place in the end of topology discovery/update:
     This is done to reduce number of events sent to userspace in case complex
     topology discovery is going, adding multiple number of connectors;

3. Remove notification callback call from short pulse interrupt processing function:
     This is done in order not to block interrupt processing function, in case any
     MST request will be made from it. Notification will be send from topology
     discovery/update work item.
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Our PBN value overflows the 20 bits integer part of the 20.12
fixed point. We need to use 31.32 fixed point to avoid this.

This happens with display clocks larger than 293122 (at 24 bpp),
which we see with the Sharp (and similar) 4k tiled displays.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm_fixp_from_fraction allows us to create a fixed point directly
from a fraction, rather than creating fixed point values and dividing
later. This avoids overflow of our 64 bit value for large numbers.

drm_fixp2int_ceil allows us to return the ceiling of our fixed point
value.

[airlied: squash Jordan's fix]
32-bit-build-fix: Jordan Lazare <Jordan.Lazare@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

max_payload is limited by the space we have in
drm_dp_mst_topology_mgr::vcpi_mask,payload_mask. We need to track
max_payloads+1 IDs in these masks, see drm_dp_mst_assign_payload_id().
Add a sanity check for this.

Caught by coverity.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Otherwise this call would have no effect.

Caught by Coverity.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

In drm_dp_mst_allocate_vcpi, it returns true in two paths,
but in one path, there is no reference couting decrease.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

- fix and enable iceland/topaz support
- handle WC on platforms that don't support it

* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: disable uvd and vce clockgating on Fiji
  drm/amdgpu: remove exp hardware support from iceland
  drm/amdgpu: load MEC ucode manually on iceland
  drm/amdgpu: don't load MEC2 on topaz
  drm/amdgpu: drop topaz support from gmc8 module
  drm/amdgpu: pull topaz gmc bits into gmc_v7
  drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
  drm/amdgpu: iceland use CI based MC IP
  drm/amdgpu: move gmc7 support out of CIK dependency
  drm/amdgpu/gfx7: enable cp inst/reg error interrupts
  drm/amdgpu/gfx8: enable cp inst/reg error interrupts
  drm/amdgpu: mask out WC from BO on unsupported arches
  drm/radeon: mask out WC from BO on unsupported arches
  drm: add helper to check for wc memory support
  drm/amdgpu: no need to load MC firmware on fiji

Merge tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes

two static checker fixes.

* tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Remove unnecessary cast in kfree
  drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()

Merge branch 'exynos-drm-fixes' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

  Just regression fixes.
   - Fix build warning and error without PM configuration
   - Fix no display issue on Snow board reported by Michal Suchanek,
     http://www.spinics.net/lists/dri-devel/msg99473.html

* 'exynos-drm-fixes' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: dp: Fix panel and bridge lookup logic
  drm: exynos: make PM functions as __maybe_unused
  drm/exynos: fix building without CONFIG_PM_SLEEP

Merge branch 'drm/adv7511' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into drm-fixes

misc adv7511 edid reading fixes.

* 'drm/adv7511' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  drm: adv7511: it's HPD, not HDP
  drm: adv7511: mark ADV7511_REG_EDID_READ_CTRL volatile
  drm: adv7511: really enable interrupts for EDID detection

misc i915 fixes.

* tag 'drm-intel-fixes-2016-02-04' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: refine qemu south bridge detection
  drm/i915: Remove select to deleted STOP_MACHINE from Kconfig
  drm/i915: Fix NULL plane->fb oops on SKL
  drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
  drm/i915/dp: fall back to 18 bpp when sink capability is unknown
  drm/i915: Make sure DC writes are coherent on flush.

Doesn't work properly yet.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's working now.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=92270Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The smc doesn't handle it.
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Not validated.
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

topaz is actually gmc7.
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Add the topaz golden settings into the gmc7 module.
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Cc: stable@vger.kernel.org

It's used by iceland which is VI.
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Enable CP register/instruction error interrupts. Useful
for debugging command stream problems.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable CP register/instruction error interrupts. Useful
for debugging command stream problems.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Fix this typo, consequently used over both files :)
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Archit Taneja <architt@codeaurora.org>

This register includes a counter which is decremented by the chip on I2C
failures. Also, it is reset when powering down.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Archit Taneja <architt@codeaurora.org>

The interrupts for EDID_READY or DDC_ERROR were never enabled in this
driver, so reading EDID always timed out when chip was powered down and
interrupts were used. Fix this and also remove clearing the interrupt
flags, they are cleared in POWER_DOWN mode anyhow (unlike the interrupt
enable flags) according to docs and my tests.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Archit Taneja <architt@codeaurora.org>

Commit a9fa8528 ("drm/exynos: dp: add of_graph dt binding support
for panel") made the Exynos DP DT binding more consistent since the OF
graph could be used to lookup either a panel or a bridge device node.

Before that commit, a panel would be looked up using a phandle and a
bridge using the OF graph which made the DT binding not consistent.

But the patch broke the later case since not finding a panel dev node
would cause the driver's to do a probe deferral instead of attempting
to lookup a bridge device node associated with the remote endpoint.

So instead of returning a -EPROBE_DEFER if a panel is not found, check
if there's a bridge and only do a probe deferral if both aren't found.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Michal Suchanek <hramrach@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The newly added runtime-pm support for exynos-drm encloses the
pm functions in an #ifdef, but not the functions that are called
from them and nowhere else, which produces warnings:

drm/exynos/exynos_drm_dsi.c:733:13: warning: 'exynos_dsi_disable_clock' defined but not used [-Wunused-function]
 static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
             ^
drm/exynos/exynos_drm_dsi.c:1291:13: warning: 'exynos_dsi_disable_irq' defined but not used [-Wunused-function]
 static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
             ^

This removes the #ifdef and instead marks the functions as
__maybe_unused, so gcc can silently discard them and all called
functions when CONFIG_PM is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The runtime PM operations use the suspend/resume functions
even when CONFIG_PM_SLEEP is not set, but this now fails
for the exynos DRM driver:

exynos_mixer.c:1289:61: error: 'exynos_mixer_resume' undeclared here (not in a function)
  SET_RUNTIME_PM_OPS(exynos_mixer_suspend, exynos_mixer_resume, NULL)

This removes the #ifdef and instead marks the functions as
__maybe_unused, which does the right thing in all cases and
also looks nicer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes and new device ids for 4.5-rc2.  Nothing
  major here, full details are in the shortlog, and all of these have
  been in linux-next successfully"

* tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: option: fix Cinterion AHxx enumeration
  USB: mxu11x0: fix memory leak on usb_serial private data
  USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable
  USB: serial: option: Adding support for Telit LE922
  USB: serial: visor: fix crash on detecting device without write_urbs
  USB: visor: fix null-deref at probe
  USB: cp210x: add ID for IAI USB to RS485 adaptor
  usb: hub: do not clear BOS field during reset device
  cdc-acm:exclude Samsung phone 04e8:685d
  usb: cdc-acm: send zero packet for intel 7260 modem
  usb: cdc-acm: handle unlinked urb in acm read callback

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.5-rc2.

  They resolve a number of reported problems (the ioctl one specifically
  has been pointed out by numerous people) and one patch adds some new
  device ids for the 8250_pci driver.  All have been in linux-next
  successfully"

* tag 'tty-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_pci: Add Intel Broadwell ports
  staging/speakup: Use tty_ldisc_ref() for paste kworker
  n_tty: Fix unsafe reference to "other" ldisc
  tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
  tty: Retry failed reopen if tty teardown in-progress
  tty: Wait interruptibly for tty lock on reopen