- 10 Jan, 2024 38 commits
-
-
Rahul Rameshbabu authored
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Fixes: 5100d5ac ("b43: Add PIO support for PCMCIA devices") Signed-off-by:
Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by:
Julian Calaby <julian.calaby@gmail.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-3-sergeantsagara@protonmail.com
-
Rahul Rameshbabu authored
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Log of issue before change (with kernel parameter qos=0): [ +5.112651] ------------[ cut here ]------------ [ +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000044] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000055] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)] [ +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00 [ +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097 [ +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900 [ +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0 [ +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000 [ +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40 [ +0.000001] FS: 0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0 [ +0.000002] Call Trace: [ +0.000003] <TASK> [ +0.000001] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000044] ? __warn+0x81/0x130 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000045] ? report_bug+0x171/0x1a0 [ +0.000004] ? handle_bug+0x41/0x70 [ +0.000004] ? exc_invalid_op+0x17/0x70 [ +0.000003] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000043] ieee80211_wake_queue+0x4a/0x80 [mac80211] [ +0.000044] b43_dma_handle_txstatus+0x29c/0x3a0 [b43] [ +0.000016] ? __pfx_irq_thread_fn+0x10/0x10 [ +0.000002] b43_handle_txstatus+0x61/0x80 [b43] [ +0.000012] b43_interrupt_thread_handler+0x3f9/0x6b0 [b43] [ +0.000011] irq_thread_fn+0x23/0x60 [ +0.000002] irq_thread+0xfe/0x1c0 [ +0.000002] ? __pfx_irq_thread_dtor+0x10/0x10 [ +0.000001] ? __pfx_irq_thread+0x10/0x10 [ +0.000001] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- [ +0.000065] ------------[ cut here ]------------ [ +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000073] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000084] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43] [ +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] Workqueue: phy7 b43_tx_work [b43] [ +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 [ +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097 [ +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900 [ +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900 [ +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0 [ +0.000002] FS: 0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0 [ +0.000002] Call Trace: [ +0.000001] <TASK> [ +0.000001] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? __warn+0x81/0x130 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? report_bug+0x171/0x1a0 [ +0.000005] ? handle_bug+0x41/0x70 [ +0.000003] ? exc_invalid_op+0x17/0x70 [ +0.000004] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] ieee80211_stop_queue+0x36/0x50 [mac80211] [ +0.000077] b43_dma_tx+0x550/0x780 [b43] [ +0.000023] b43_tx_work+0x90/0x130 [b43] [ +0.000018] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27b/0x3a0 [ +0.000004] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork_asm+0x1b/0x30 [ +0.000006] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: e6f5b934 ("b43: Add QOS support") Signed-off-by: -
Bitterblue Smith authored
rtl8xxxu_set_basic_rates() sets the wrong initial RTS rate. It sets the next higher rate than the one it should set, e.g. 36M instead of 24M. The while loop was supposed to find the index of the most significant bit which is 1, but it was copied incorrectly from the vendor driver. Use __fls() instead. Signed-off-by:
Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Bitterblue Smith authored
Some devices, like the Comfast CF-826F, use LED1, which already works. Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly. Write the right values to the LED control registers to make LED0 work as well. This is unfortunately tested only with the Comfast CF-826F. Signed-off-by:
-
Martin Kaistra authored
Everything is in place now for concurrent mode, we can tell the system that we support it. We will allow a maximum of 2 virtual interfaces, one of them can be in AP mode. Signed-off-by:
Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by:
-
Martin Kaistra authored
When the driver is used for concurrent mode, both virtual interfaces can be set to station or AP mode, though only one can be in AP mode at the same time. In order to keep the code simple, use only hw port 0 for AP mode. When an interface is added in AP mode which would be assigned to port 1, use a switch_port function to transparently swap the mapping between virtual interface and hw port. Signed-off-by:
-
Martin Kaistra authored
Add a custom function for allocating entries in the sec cam. This allows us to store multiple keys with the same keyidx. The maximum number of sec cam entries for 8188f is 16 according to the vendor driver. Add the number to rtl8xxxu_fileops, so that other chips which might support more entries, can set a different number there. Set the bssid as mac address for group keys instead of just using the ethernet broadcast address and use BIT(6) in the sec cam ctrl entry for differentiating them from pairwise keys like in the vendor driver. Add the TXDESC_EN_DESC_ID bit and the hw_key_idx to tx broadcast/multicast packets in AP mode. Finally, allow the usage of rtl8xxxu_set_key() for AP mode. Signed-off-by:
-
Martin Kaistra authored
Now that all uses of priv->vif have been converted to priv->vifs[] remove the old attribute. Signed-off-by:
-
Martin Kaistra authored
Until now, the driver only assigned a dedicated macid for connections made in AP mode, in STA mode the return value of rtl8xxxu_get_macid() was simply 0. To differentiate between port 0 and 1, when both are in STA mode, allocate a second macid (with value 1) and set sta_info->macid according to the used port_num in rtl8xxxu_sta_add(). Signed-off-by:
-
Martin Kaistra authored
Call set_bssid() with the correct port_num now. Signed-off-by:
-
Martin Kaistra authored
Call set_linktype and set_bssid now with correct port_num. Call stop_tx_beacon only for port 0, as we don't support beacons on port 1. Explicit changes to BEACON will only happen for AP type interfaces, so we don't need an additional check there. Signed-off-by:
-
Martin Kaistra authored
Add a custom struct to store in vif->drv_priv with a reference to port_num and fill it when a new interface is added. Choose a free port_num for the newly added interface. As we only want to support AP mode/sending beacons on port 0, only change the beacon settings if a new interface is actually assigned to port 0. Call set_linktype() and set_mac() with the appropriate port_num. Signed-off-by:
-
Martin Kaistra authored
Check first whether priv->vifs[0] exists and is of type STATION, then go to priv->vifs[1]. Make sure to call refresh_rate_mask for both interfaces. Signed-off-by:
-
Martin Kaistra authored
As we only want to support AP mode/sending beacons on port 0, change from priv->vif to priv->vifs[0] in the check for AP mode. Additionally, if we are in AP mode, don't filter RX beacon and probe response frames to still allow working STATION mode on the other interface. Signed-off-by:
-
Martin Kaistra authored
As we only want to support AP mode/sending beacons on port 0, it is enough to replace priv->vif with priv->vifs[0]. Signed-off-by:
-
Martin Kaistra authored
In concurrent mode supported by this driver, both interfaces will use the same channel and same wireless mode. It is therefore possible to get the wireless mode by checking the first connected interface. Signed-off-by:
-
Martin Kaistra authored
To prepare for concurrent mode, enhance rtl8xxxu_set_bssid() to write the BSSID of the respective interface to REG_BSSID or REG_BSSID1. Like done with rtl8xxxu_set_mac(), call rtl8xxxu_set_bssid() with port_num = 0, until the callers also support multiple interfaces. Signed-off-by:
-
Martin Kaistra authored
If both interfaces are in STATION mode and both are connected to an AP, there might be conflicting CFO values for the two connections. Ignore the CFO information in this case. Signed-off-by:
-
Martin Kaistra authored
The driver will support two interfaces soon, which both can be in station mode, so extend the check, whether cfo information should be parsed, to cover both interfaces. For better code readability put the lines with priv->vifs[port_num] in a separate function. Signed-off-by:
-
Martin Kaistra authored
There are multiple places in the code where the current connection status of wifi is checked. The driver will support two interfaces soon and either one of them (or both) could be connected. Convert all uses of (vif && vif->cfg.assoc) to a new helper function rtl8xxxu_is_assoc() which checks both interfaces. Signed-off-by:
-
Martin Kaistra authored
To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the mac address of the respective interface to REG_MACID or REG_MACID1. Remove the call to rtl8xxxu_set_mac() from the init function as we set it in rtl8xxxu_add_interface() later anyway. Until rtl8xxxu_add_interface() can handle both interfaces, call rtl8xxxu_set_mac() with port_num = 0. Signed-off-by:
-
Martin Kaistra authored
The driver currently does not support AP or concurrent mode for 8188e, so just use priv->vifs[0] instead of priv->vif for now. Signed-off-by:
-
Martin Kaistra authored
To prepare for concurrent mode, enhance the set_linktype function to be able to set the linktype in the MSR register for both hardware ports. Until the users of set_linktype can handle multiple interfaces, use port_num = 0. Signed-off-by:
-
Martin Kaistra authored
To prepare for concurrent mode, add an array ("vifs") to rtl8xxxu_priv to keep track of both interfaces. Keep the old priv->vif as long there are still users of it and let priv->vifs[0] point to the same location. Signed-off-by: -
Martin Kaistra authored
priv->vif gets already set in rtl8xxxu_add_interface, there is no need to set it also in rtl8xxxu_bss_info_changed(). Signed-off-by:
-
Ping-Ke Shih authored
Refine the power parameters for better step response especially at high current ramp case that is caused by power inductor variation. Signed-off-by:
-
Colin Ian King authored
There are two spelling mistakes in rtw89_err error messages. Fix these and also add space between [ERR] and message text. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
-
Ping-Ke Shih authored
The channel_info is hardware settings to reflect operational status, such as scale factor, report unit, buffer matrix size, RU size and so on. Then, we can get desired reports to do further tuning. Signed-off-by:
-
Ping-Ke Shih authored
TX power is controlled by BB layer basically, but it should interact with MAC layer, so these registers are put on MAC register domain and called BB wrapper, which contains TX power for each MAC ID, OFDMA RU power, and consideration of power type table. Signed-off-by:
-
Ping-Ke Shih authored
NCTL standing for nano-controller is used to assist RF calibration. Basically, we write settings from a table, but format of the table can't describe register mask and additional conditions, so add a function to set this kind of settings. Signed-off-by:
-
Ping-Ke Shih authored
BB parameter file is a list of tuple {addr, val} with conditional hardware version. However, tuples within a condition can't be empty, so insert a special dummy tuple for this case. Then, ignore this tuple when writing. Signed-off-by: -
Cheng-Chieh Hsieh authored
DIG standing for dynamic initial gain that is used to adjust RX coverage, and PD lower threshold is packet detection power level by received signal strength to avoid false detection of the WiFi packet. Because of the hardware is different between WiFi 7 and 6 ICs, we adjust flow and add register definition for 8922A. Signed-off-by:
Cheng-Chieh Hsieh <cj.hsieh@realtek.com> Signed-off-by:
-
Chung-Hsuan Hung authored
Set values of LNA, TIA and RPL gain compensation read from firmware file when channel is changed. Signed-off-by:
Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by:
-
Chung-Hsuan Hung authored
Add RX gain offset dynamic setting flow according to different bands and bandwidths. RX gain offset values will be different according to different channel bands, therefore, this dynamic mechanism is needed while channel is changed. Add this to parse data from the element of firmware file, and then we can use them easier at runtime. Signed-off-by:
-
Ping-Ke Shih authored
WiFi 7 chips use different bb_gain_info struct, so move existing struct to a union in advance. This doesn't change logic at all. Signed-off-by:
-
Zong-Zhe Yang authored
Update TX power tables to RF version R37. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
Update TX power tables to RF version R36. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by:
-
Chin-Yen Lee authored
Sometimes driver can't use kernel API pci_read/write_config_byte to access the PCI config space of above address 0x100 due to the negotiated PCI setting. 8852AE/8852BE/8851BE provide another way called DBI function, which belongs to WiFi mac and could access all PCI config space for this case. Link: https://lore.kernel.org/linux-wireless/79fe81b7db7148b9a7da2353c16d70fb@realtek.com/T/#tSigned-off-by:
Chin-Yen Lee <timlee@realtek.com> Signed-off-by:
-
- 08 Jan, 2024 2 commits
-
-
Jakub Kicinski authored
Revert "net/mlx5: Implement management PF Ethernet profile" This reverts commit 22c46406. Revert "net/mlx5: Enable SD feature" This reverts commit c88c49ac. Revert "net/mlx5e: Block TLS device offload on combined SD netdev" This reverts commit 83a59ce0. Revert "net/mlx5e: Support per-mdev queue counter" This reverts commit d72baceb. Revert "net/mlx5e: Support cross-vhca RSS" This reverts commit c73a3ab8. Revert "net/mlx5e: Let channels be SD-aware" This reverts commit e4f9686b. Revert "net/mlx5e: Create EN core HW resources for all secondary devices" This reverts commit c4fb94aa. Revert "net/mlx5e: Create single netdev per SD group" This reverts commit e2578b4f. Revert "net/mlx5: SD, Add informative prints in kernel log" This reverts commit c82d3603. Revert "net/mlx5: SD, Implement steering for primary and secondaries" This reverts commit 605fcce3. Revert "net/mlx5: SD, Implement devcom communication and primary election" This reverts commit a45af9a9. Revert "net/mlx5: SD, Implement basic query and instantiation" This reverts commit 63b9ce94. Revert "net/mlx5: SD, Introduce SD lib" This reverts commit 4a04a31f. Revert "net/mlx5: Fix query of sd_group field" This reverts commit e04984a3. Revert "net/mlx5e: Use the correct lag ports number when creating TISes" This reverts commit a7e7b40c. There are some unanswered questions on the list, and we don't have any docs. Given the lack of replies so far and the fact that v6.8 merge window has started - let's revert this and revisit for v6.9. Link: https://lore.kernel.org/all/20231221005721.186607-1-saeed@kernel.org/Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Revert "net: stmmac: Use interrupt mode INTM=1 for per channel irq" This reverts commit 36af9f25. Revert "net: stmmac: Add support for TX/RX channel interrupt" This reverts commit 9072e03d. Revert "net: stmmac: Make MSI interrupt routine generic" This reverts commit 477bd4be. Revert "dt-bindings: net: snps,dwmac: per channel irq" This reverts commit 67d47c8a. Device tree bindings need to be reviewed. Link: https://lore.kernel.org/all/2df9fe3e-7971-4aa2-89a9-0e085b3b00d7@linaro.org/Signed-off-by:
-
