- 15 Sep, 2011 19 commits
-
-
Rasesh Mody authored
Naming changes: rename devid, BNAD_MAX_TXS, BNAD_MAX_RXS, BNAD_MAX_RXPS_PER_RX to device, BNAD_MAX_TX, BNAD_MAX_RX, BNAD_MAX_RXP_PER_RX respectively and change all the references. Macro Fix: Add ioc_isr_mod_set check to bfa_nw_ioc_mbox_regisr macro Signed-off-by:
Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by:
Rasesh Mody <rmody@brocade.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Huang Ying authored
The functionality of xlist and llist is almost same. This patch replace xlist with llist to avoid code duplication. Known issues: don't know how to test this, need special hardware? Signed-off-by:
Huang Ying <ying.huang@intel.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Andy Grover <andy.grover@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
We should release the dev_hold() on error before returning here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
When we kfree(entry) that causes a use-after-free bug so we have to use list_for_each_entry_safe() safe here. Signed-off-by:
-
Dan Carpenter authored
Use kfree_skb() to free sbk_buffs. Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
Ian Campbell authored
Signed-off-by:
-
- 30 Aug, 2011 7 commits
-
-
Dmitry Kravkov authored
On Mon, 2011-08-29 at 13:28 -0700, Randy Dunlap wrote: > (on i386 or x86_64) > > drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:10148: error: 'bnx2x_fcoe_get_wwn' undeclared here (not in a function) This should sync #define structures between definition and declaration Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Reported-by:
Dmitry Kravkov <dmitry@broadcom.com> Acked-by:
-
David S. Miller authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Sucheta Chakraborty authored
Beacon test flashes both port LEDs instead of just 1 LED of a port. Updated driver version to 5.0.23. Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
-
Sritej Velaga authored
Reading CRB registers(if reqd) before releasing the api lock. Signed-off-by:
Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by:
-
Sritej Velaga authored
The FLT entry for FW image region has changed for C0 cards. Updated the driver to look at the right region in the FLT. Signed-off-by:
-
Manish chopra authored
Added more debug messages while loopback test in progress Signed-off-by:
Manish chopra <Manish.Chopra@qlogic.com> Signed-off-by:
-
Sony Chacko authored
Signed-off-by:
-
- 29 Aug, 2011 13 commits
-
-
-
Randy Dunlap authored
Fix many (randconfig) PPP build errors by fixing typos in drivers/net/Makefile. Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
Emil Tantilov authored
RNBC (0x03FC0) is only for 82598 and has different meaning on newer HW. Make sure to only clear it for 82598. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
When setting advertised speed/duplex with ethtool. Also cleaned up the comment since we also support 100/F. Signed-off-by:
-
Don Skidmore authored
A logic error in ixgbe_fc_autoneg_fiber() that treated a masked u32 as a boolean would make it so we would never fall hit a error check case. So now I force the u32 to a boolean value with '!!'. Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Tested-by:
-
Don Skidmore authored
I'm removing NETIF_F_GRO from being initialed in the feature flags during ixgbe_probe() bases on a comment from Michal Miroslaw <mirq-linux@rere.qmqm.pl> that it is always set by network code now. Signed-off-by:
-
John Fastabend authored
X540 devices do not clear PFC before sets. This results in the device possibly responding to PFC frames that the user has disabled. Although it would also be wrong for the peer to be transmitting these frames. Now we clear the register before set. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
John Fastabend authored
This consolidates setup code for multiple traffic classes in the setup_tc routine. Prep work to allow IEEE DCBX to optimize for number of traffic classes. Also simplifies code paths. Signed-off-by:
-
John Fastabend authored
The packet buffer is correctly allocated by generic pb allocation path in ixgbe_configure() there is no need to do the allocation here as well. Signed-off-by:
-
John Fastabend authored
One existing call sites still expect either 4 or 8 traffic classes to be specified. This fixes this allowing arbitrary values up to 8 to work as expected. Signed-off-by:
-
Alexander Duyck authored
This change is meant to fix the patch: ixgbe: Cleanup FCOE and VLAN handling in xmit_frame_ring And can be rolled into it if needed. What this fixes is that VLAN tagged packets were not being tagged if they were prio 7 which matches up with TC_PRIO_CONTROL. In order to fix it I am just setting things up so that we always tag VLAN tagged packets. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Alexander Duyck authored
This change makes it so that the CC bit in the descriptor is set when SR-IOV is enabled. This is needed in order to support offloading functionality when passing traffic over the internal TX switch. Signed-off-by:
-
- 28 Aug, 2011 1 commit
-
-
Joe Perches authored
Remove per site OOM messages because they duplicate the generic mm subsystem OOM message. Use kzalloc instead of kmalloc/memset when next to the OOM message removals. Reduces object size (allyesconfig ~2%) $ size -t drivers/net/caif/built-in.o.old net/caif/built-in.o.old text data bss dec hex filename 32297 700 8224 41221 a105 drivers/net/caif/built-in.o.old 72159 1317 20552 94028 16f4c net/caif/built-in.o.old 104456 2017 28776 135249 21051 (TOTALS) $ size -t drivers/net/caif/built-in.o.new net/caif/built-in.o.new text data bss dec hex filename 31975 700 8184 40859 9f9b drivers/net/caif/built-in.o.new 70748 1317 20152 92217 16839 net/caif/built-in.o.new 102723 2017 28336 133076 207d4 (TOTALS) Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
