Pull dmaengine fixes from Vinod Koul:
 "A bunch of driver fixes for:

   - ptdma error handling in init

   - lock fix in at_hdmac

   - error path and error num fix for sh dma

   - pm balance fix for stm32"

* tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: shdma: Fix runtime PM imbalance on error
  dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size
  dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe
  dmaengine: sh: rcar-dmac: Check for error num after setting mask
  dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet()
  dmaengine: ptdma: Fix the error handling path in pt_core_init()

Pull i2c fixes from Wolfram Sang:
 "Some driver updates, a MAINTAINERS fix, and additions to COMPILE_TEST
  (so we won't miss build problems again)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: remove duplicate entry for i2c-qcom-geni
  i2c: brcmstb: fix support for DSL and CM variants
  i2c: qup: allow COMPILE_TEST
  i2c: imx: allow COMPILE_TEST
  i2c: cadence: allow COMPILE_TEST
  i2c: qcom-cci: don't put a device tree node before i2c_add_adapter()
  i2c: qcom-cci: don't delete an unregistered adapter
  i2c: bcm2835: Avoid clock stretching timeouts

Pull input fixes from Dmitry Torokhov:

 - a fix for Synaptics touchpads in RMI4 mode failing to suspend/resume
   properly because I2C client devices are now being suspended and
   resumed asynchronously which changed the ordering

 - a change to make sure we do not set right and middle buttons
   capabilities on touchpads that are "buttonpads" (i.e. do not have
   separate physical buttons)

 - a change to zinitix touchscreen driver adding more compatible
   strings/IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - set up dependency between PS/2 and SMBus companions
  Input: zinitix - add new compatible strings
  Input: clear BTN_RIGHT/MIDDLE on buttonpads

Pull power supply fixes from Sebastian Reichel:
 "Three regression fixes for the 5.17 cycle:

   - build warning fix for power-supply documentation

   - pointer size fix in cw2015 battery driver

   - OOM handling in bq256xx charger driver"

* tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: bq256xx: Handle OOM correctly
  power: supply: core: fix application of sizeof to pointer
  power: supply: fix table problem in sysfs-class-power

Merge tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull mount_setattr test/doc fixes from Christian Brauner:
 "This contains a fix for one of the selftests for the mount_setattr
  syscall to create idmapped mounts, an entry for idmapped mounts for
  maintainers, and missing kernel documentation for the helper we split
  out some time ago to get and yield write access to a mount when
  changing mount properties"

* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fs: add kernel doc for mnt_{hold,unhold}_writers()
  MAINTAINERS: add entry for idmapped mounts
  tests: fix idmapped mount_setattr test

Pull pidfd fix from Christian Brauner:
 "This fixes a problem reported by lockdep when installing a pidfd via
  fd_install() with siglock and the tasklisk write lock held in
  copy_process() when calling clone()/clone3() with CLONE_PIDFD.

  Originally a pidfd was created prior to holding any of these locks but
  this required a call to ksys_close(). So quite some time ago in
  6fd2fe49 ("copy_process(): don't use ksys_close() on cleanups") we
  switched to a get_unused_fd_flags() + fd_install() model.

  As part of that we moved fd_install() as late as possible. This was
  done for two main reasons. First, because we needed to ensure that we
  call fd_install() past the point of no return as once that's called
  the fd is live in the task's file table. Second, because we tried to
  ensure that the fd is visible in /proc/<pid>/fd/<pidfd> right when the
  task is visible.

  This fix moves the fd_install() to an even later point which means
  that a task will be visible in proc while the pidfd isn't yet under
  /proc/<pid>/fd/<pidfd>.

  While this is a user visible change it's very unlikely that this will
  have any impact. Nobody should be relying on that and if they do we
  need to come up with something better but again, it's doubtful this is
  relevant"

* tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  copy_process(): Move fd_install() out of sighand->siglock critical section

Merge branch 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucounts fixes from Eric Biederman:
 "Michal Koutný recently found some bugs in the enforcement of
  RLIMIT_NPROC in the recent ucount rlimit implementation.

  In this set of patches I have developed a very conservative approach
  changing only what is necessary to fix the bugs that I can see
  clearly. Cleanups and anything that is making the code more consistent
  can follow after we have the code working as it has historically.

  The problem is not so much inconsistencies (although those exist) but
  that it is very difficult to figure out what the code should be doing
  in the case of RLIMIT_NPROC.

  All other rlimits are only enforced where the resource is acquired
  (allocated). RLIMIT_NPROC by necessity needs to be enforced in an
  additional location, and our current implementation stumbled it's way
  into that implementation"

* 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Handle wrapping in is_ucounts_overlimit
  ucounts: Move RLIMIT_NPROC handling after set_user
  ucounts: Base set_cred_ucounts changes on the real user
  ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1
  rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user

The driver is already covered in the ARM/QUALCOMM section. Also, Akash
Asthana's email bounces meanwhile and Mukesh Savaliya has never
responded to mails regarding this driver.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull NFS client bugfixes from Anna Schumaker:

 - Fix unnecessary changeattr revalidations

 - Fix resolving symlinks during directory lookups

 - Don't report writeback errors in nfs_getattr()

* tag 'nfs-for-5.17-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Do not report writeback errors in nfs_getattr()
  NFS: LOOKUP_DIRECTORY is also ok with symlinks
  NFS: Remove an incorrect revalidation in nfs4_update_changeattr_locked()

Pull ACPI fixes from Rafael Wysocki:
 "These make an excess warning message go away and fix a recently
  introduced boot failure on a vintage machine.

  Specifics:

   - Change the log level of the "table not found" message in
     acpi_table_parse_entries_array() to debug to prevent it from
     showing up in the logs unnecessarily (Dan Williams)

   - Add a C-state limit quirk for 32-bit ThinkPad T40 to prevent it
     from crashing on boot after recent changes in the ACPI processor
     driver (Woody Suwalski)"

* tag 'acpi-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40
  ACPI: tables: Quiet ACPI table not found warning

Pull RISC-V fixes from Palmer Dabbelt:
 "A set of three fixes, all aimed at fixing some fallout from the recent
  sparse hart ID support"

* tag 'riscv-for-linus-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid ordering
  RISC-V: Fix handling of empty cpu masks
  RISC-V: Fix hartid mask handling for hartid 31 and up

When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we
create SMBus companion devices that are attached to I2C/SMBus controllers.
However, when suspending and resuming, we also need to make sure that we
take into account the PS/2 device they are associated with, so that PS/2
device is suspended after the companion and resumed before it, otherwise
companions will not work properly. Before I2C devices were marked for
asynchronous suspend/resume, this ordering happened naturally, but now we
need to enforce it by establishing device links, with PS/2 devices being
suppliers and SMBus companions being consumers.

Fixes: 172d9319 ("i2c: enable async suspend/resume on i2c client devices")
Reported-and-tested-by: Hugh Dickins <hughd@google.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com
Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge fix for a recent boot lockup regression on 32-bit ThinkPad T40.

* acpi-processor:
  ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40

Pull MTD fixes from Miquel Raynal:
 "MTD changes:

   - Qcom:
      - Don't print error message on -EPROBE_DEFER
      - Fix kernel panic on skipped partition
      - Fix missing free for pparts in cleanup

   - phram: Prevent divide by zero bug in phram_setup()

  Raw NAND controller changes:

   - ingenic: Fix missing put_device in ingenic_ecc_get

   - qcom: Fix clock sequencing in qcom_nandc_probe()

   - omap2: Prevent invalid configuration and build error

   - gpmi: Don't leak PM reference in error path

   - brcmnand: Fix incorrect sub-page ECC status"

* tag 'mtd/fixes-for-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status
  mtd: rawnand: gpmi: don't leak PM reference in error path
  mtd: phram: Prevent divide by zero bug in phram_setup()
  mtd: rawnand: omap2: Prevent invalid configuration and build error
  mtd: parsers: qcom: Fix missing free for pparts in cleanup
  mtd: parsers: qcom: Fix kernel panic on skipped partition
  mtd: parsers: qcom: Don't print error message on -EPROBE_DEFER
  mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()
  mtd: rawnand: ingenic: Fix missing put_device in ingenic_ecc_get

Pull block fixes from Jens Axboe:

 - Surprise removal fix (Christoph)

 - Ensure that pages are zeroed before submitted for userspace IO
   (Haimin)

 - Fix blk-wbt accounting issue with BFQ (Laibin)

 - Use bsize for discard granularity in loop (Ming)

 - Fix missing zone handling in blk_complete_request() (Pankaj)

* tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-block:
  block/wbt: fix negative inflight counter when remove scsi device
  block: fix surprise removal for drivers calling blk_set_queue_dying
  block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern
  block: loop:use kstatfs.f_bsize of backing file to set discard granularity
  block: Add handling for zone append command in blk_complete_request

Pull sound fixes from Takashi Iwai:
 "A collection of small patches, mostly for old and new regressions and
  device-specific fixes.

   - Regression fixes regarding ALSA core SG-buffer helpers

   - Regression fix for Realtek HD-audio mutex deadlock

   - Regression fix for USB-audio PM resume error

   - More coverage of ASoC core control API notification fixes

   - Old regression fixes for HD-audio probe mask

   - Fixes for ASoC Realtek codec work handling

   - Other device-specific quirks / fixes"

* tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ASoC: intel: skylake: Set max DMA segment size
  ASoC: SOF: hda: Set max DMA segment size
  ALSA: hda: Set max DMA segment size
  ALSA: hda/realtek: Fix deadlock by COEF mutex
  ALSA: usb-audio: Don't abort resume upon errors
  ALSA: hda: Fix missing codec probe on Shenker Dock 15
  ALSA: hda: Fix regression on forced probe mask option
  ALSA: hda/realtek: Add quirk for Legion Y9000X 2019
  ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra
  ASoC: wm_adsp: Correct control read size when parsing compressed buffer
  ASoC: qcom: Actually clear DMA interrupt register for HDMI
  ALSA: memalloc: invalidate SG pages before sync
  ALSA: memalloc: Fix dma_need_sync() checks
  MAINTAINERS: update cros_ec_codec maintainers
  ASoC: rt5682: do not block workqueue if card is unbound
  ASoC: rt5668: do not block workqueue if card is unbound
  ASoC: rt5682s: do not block workqueue if card is unbound
  ASoC: tas2770: Insert post reset delay
  ASoC: Revert "ASoC: mediatek: Check for error clk pointer"
  ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver
  ...

Pull arm64 fix from Catalin Marinas:
 "Fix wrong branch label in the EL2 GICv3 initialisation code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Correct wrong label in macro __init_el2_gicv3

Pull powerpc fixes from Michael Ellerman:

 - Fix boot failure on 603 with DEBUG_PAGEALLOC and KFENCE

 - Fix 32-build with newer binutils that rejects 'ptesync' etc

Thanks to Anders Roxell, Christophe Leroy, and Maxime Bizon.

* tag 'powerpc-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/lib/sstep: fix 'ptesync' build error
  powerpc/603: Fix boot failure with DEBUG_PAGEALLOC and KFENCE

Pull cifs fixes from Steve French:
 "Six small smb3 client fixes, three for stable:

   - fix for snapshot mount option

   - two ACL related fixes

   - use after free race fix

   - fix for confusing warning message logged with older dialects"

* tag '5.17-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix confusing unneeded warning message on smb2.1 and earlier
  cifs: modefromsids must add an ACE for authenticated users
  cifs: fix double free race when mount fails in cifs_get_root()
  cifs: do not use uninitialized data in the owner/group sid
  cifs: fix set of group SID via NTSD xattrs
  smb3: fix snapshot mount option

DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.

Fixes: e2e5a2c6 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Fixes to ftrace, exec, and seccomp tests build, run-time and install
  bugs. These bugs are in the way of running the tests"

* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
  selftests/seccomp: Fix seccomp failure by adding missing headers
  selftests/exec: Add non-regular to TEST_GEN_PROGS

Pull drm fixes from Dave Airlie:
 "Regular fixes for rc5, nothing really stands out, mostly some amdgpu
  and i915 fixes with mediatek, radeon and some misc fixes.

  cma-helper:
   - set VM_DONTEXPAND

  atomic:
   - error handling fix

  mediatek:
   - fix probe defer loop with external bridge

  amdgpu:
   - Stable pstate clock fixes for Dimgrey Cavefish and Beige Goby
   - S0ix SDMA fix
   - Yellow Carp GPU reset fix

  radeon:
   - Backlight fix for iMac 12,1

  i915:
   - GVT kerneldoc cleanup.
   - GVT Kconfig should depend on X86
   - Prevent out of range access in SWSCI display code
   - Fix mbus join and dbuf slice config lookup
   - Fix inverted priority selection in the TTM backend
   - Fix FBC plane end Y offset check"

* tag 'drm-fixes-2022-02-18' of git://anongit.freedesktop.org/drm/drm:
  drm/atomic: Don't pollute crtc_state->mode_blob with error pointers
  drm/radeon: Fix backlight control on iMac 12,1
  drm/amd/pm: correct the sequence of sending gpu reset msg
  drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.
  drm/amd/pm: correct UMD pstate clocks for Dimgrey Cavefish and Beige Goby
  drm/i915/fbc: Fix the plane end Y offset check
  drm/i915/opregion: check port number bounds for SWSCI display power state
  drm/i915/ttm: tweak priority hint selection
  drm/i915: Fix mbus join config lookup
  drm/i915: Fix dbuf slice config lookup
  drm/cma-helper: Set VM_DONTEXPAND for mmap
  drm/mediatek: mtk_dsi: Avoid EPROBE_DEFER loop with external bridge
  drm/i915/gvt: Make DRM_I915_GVT depend on X86
  drm/i915/gvt: clean up kernel-doc in gtt.c

Merge tag 'drm-intel-fixes-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- GVT kerneldoc cleanup. (Randy Dunlap)
- GVT Kconfig should depend on X86. (Siva Mullati)
- Prevent out of range access in SWSCI display code. (Jani Nikula)
- Fix mbus join and dbuf slice config lookup. (Ville Syrjälä)
- Fix inverted priority selection in the TTM backend. (Matthew Auld)
- Fix FBC plane end Y offset check. (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4lA6k8+xp8u3aB@tursulin-mobl2

 * drm/cma-helper: Set VM_DONTEXPAND
 * drm/atomic: Fix error handling in drm_atomic_set_mode_for_crtc()
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4mzQALMX69UmA3@linux-uq9g

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless and netfilter.

  Current release - regressions:

   - dsa: lantiq_gswip: fix use after free in gswip_remove()

   - smc: avoid overwriting the copies of clcsock callback functions

  Current release - new code bugs:

   - iwlwifi:
      - fix use-after-free when no FW is present
      - mei: fix the pskb_may_pull check in ipv4
      - mei: retry mapping the shared area
      - mvm: don't feed the hardware RFKILL into iwlmei

  Previous releases - regressions:

   - ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()

   - tipc: fix wrong publisher node address in link publications

   - iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
     assertion

   - bgmac: make idm and nicpm resource optional again

   - atl1c: fix tx timeout after link flap

  Previous releases - always broken:

   - vsock: remove vsock from connected table when connect is
     interrupted by a signal

   - ping: change destination interface checks to match raw sockets

   - crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
     semantics (and null-deref) after SO_RESERVE_MEM was added

   - ipv6: make exclusive flowlabel checks per-netns

   - bonding: force carrier update when releasing slave

   - sched: limit TC_ACT_REPEAT loops

   - bridge: multicast: notify switchdev driver whenever MC processing
     gets disabled because of max entries reached

   - wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found

   - iwlwifi: fix locking when "HW not ready"

   - phy: mediatek: remove PHY mode check on MT7531

   - dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN

   - dsa: lan9303:
      - fix polarity of reset during probe
      - fix accelerated VLAN handling"

* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
  bonding: force carrier update when releasing slave
  nfp: flower: netdev offload check for ip6gretap
  ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
  ipv4: fix data races in fib_alias_hw_flags_set
  net: dsa: lan9303: add VLAN IDs to master device
  net: dsa: lan9303: handle hwaccel VLAN tags
  vsock: remove vsock from connected table when connect is interrupted by a signal
  Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
  ping: fix the dif and sdif check in ping_lookup
  net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
  net: sched: limit TC_ACT_REPEAT loops
  tipc: fix wrong notification node addresses
  net: dsa: lantiq_gswip: fix use after free in gswip_remove()
  ipv6: per-netns exclusive flowlabel checks
  net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
  CDC-NCM: avoid overflow in sanity checking
  mctp: fix use after free
  net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
  bonding: fix data-races around agg_select_timer
  dpaa2-eth: Initialize mutex used in one step timestamping path
  ...

In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.

Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.

Reproducer:
$ insmod bonding.ko mode=0 miimon=100 max_bonds=2
$ ifconfig bond0 up
$ ifenslave bond0 eth0 eth1
$ ifconfig eth0 down
$ ifenslave -d bond0 eth1
$ cat /proc/net/bonding/bond0

Fixes: ff59c456 ("[PATCH] bonding: support carrier state for master")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b42bc9a3 ("Fix regression due to "fs: move binfmt_misc sysctl
to its own file") fixed a regression, however it failed to add a
kmemleak_not_leak().

Fixes: b42bc9a3 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file")
Reported-by: Tong Zhang <ztong0001@gmail.com>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix corrupt inject files when only last branch option is enabled with
   ARM CoreSight ETM

 - Fix use-after-free for realloc(..., 0) in libsubcmd, found by gcc 12

 - Defer freeing string after possible strlen() on it in the BPF loader,
   found by gcc 12

 - Avoid early exit in 'perf trace' due SIGCHLD from non-workload
   processes

 - Fix arm64 perf_event_attr 'perf test's wrt --call-graph
   initialization

 - Fix libperf 32-bit build for 'perf test' wrt uint64_t printf

 - Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to
   the CPU iterator

 - Sync linux/perf_event.h UAPI with the kernel sources

 - Update Jiri Olsa's email address in MAINTAINERS

* tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bpf: Defer freeing string after possible strlen() on it
  perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
  libsubcmd: Fix use-after-free for realloc(..., 0)
  libperf: Fix perf_cpu_map__for_each_cpu macro
  perf cs-etm: Fix corrupt inject files when only last branch option is enabled
  perf cs-etm: No-op refactor of synth opt usage
  libperf: Fix 32-bit build for tests uint64_t printf
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  perf trace: Avoid early exit due SIGCHLD from non-workload processes
  MAINTAINERS: Update Jiri's email address

Pull module fix from Luis Chamberlain:
 "Fixes module decompression when CONFIG_SYSFS=n

  The only fix trickled down for v5.17-rc cycle so far is the fix for
  module decompression when CONFIG_SYSFS=n. This was reported through
  0-day"

* tag 'modules-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: fix building with sysfs disabled

IPv6 GRE tunnels are not being offloaded, this is caused by a missing
netdev offload check. The functionality of IPv6 GRE tunnel offloading
was previously added but this check was not included. Adding the
ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly.

Fixes: f7536ffb ("nfp: flower: Allow ipv6gretap interface for offloading")
Signed-off-by: Danie du Toit <danie.dutoit@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Because fib6_info_hw_flags_set() is called without any synchronization,
all accesses to gi6->offload, fi->trap and fi->offload_failed
need some basic protection like READ_ONCE()/WRITE_ONCE().

BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt

read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0:
 fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline]
 fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033
 fib6_del_route net/ipv6/ip6_fib.c:1983 [inline]
 fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028
 __ip6_del_rt net/ipv6/route.c:3876 [inline]
 ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891
 __ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374
 ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline]
 __ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207
 ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220
 inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476
 __sock_release net/socket.c:650 [inline]
 sock_close+0x6c/0x150 net/socket.c:1318
 __fput+0x295/0x520 fs/file_table.c:280
 ____fput+0x11/0x20 fs/file_table.c:313
 task_work_run+0x8e/0x110 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
 exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1:
 fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230
 nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline]
 nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline]
 nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline]
 nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline]
 nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 worker_thread+0x616/0xa70 kernel/workqueue.c:2454
 kthread+0x2c7/0x2e0 kernel/kthread.c:327
 ret_from_fork+0x1f/0x30

value changed: 0x22 -> 0x2a

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 0c5fcf9e ("IPv6: Add "offload failed" indication to routes")
Fixes: bb3c4ab9 ("ipv6: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Amit Cohen <amcohen@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

fib_alias_hw_flags_set() can be used by concurrent threads,
and is only RCU protected.

We need to annotate accesses to following fields of struct fib_alias:

    offload, trap, offload_failed

Because of READ_ONCE()WRITE_ONCE() limitations, make these
field u8.

BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set

read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1:
 fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050
 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
 nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
 nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
 nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
 nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 process_scheduled_works kernel/workqueue.c:2370 [inline]
 worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0:
 fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054
 nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
 nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
 nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
 nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
 nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
 nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
 process_scheduled_works kernel/workqueue.c:2370 [inline]
 worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
 kthread+0x1bf/0x1e0 kernel/kthread.c:377
 ret_from_fork+0x1f/0x30

value changed: 0x00 -> 0x02

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e8-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work

Fixes: 90b93f1b ("ipv4: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If the master device does VLAN filtering, the IDs used by the switch
must be added for any frames to be received.  Do this in the
port_enable() function, and remove them in port_disable().

Fixes: a1292595 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Check for a hwaccel VLAN tag on rx and use it if present.  Otherwise,
use __skb_vlan_pop() like the other tag parsers do.  This fixes the case
where the VLAN tag has already been consumed by the master.

Fixes: a1292595 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216124634.23123-1-mans@mansr.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:

 "All the details are in the bug, but the bottom line is that somehow,
  this patch causes corruption when the numa balancing feature is
  enabled AND we don't use process affinity AND we use GUP to pin pages
  so our accelerator can DMA to/from system memory.

  Either disabling numa balancing, using process affinity to bind to
  specific numa-node or reverting this patch causes the bug to
  disappear"

and Oded bisected the issue to commit 09854ba9 ("mm: do_wp_page()
simplification").

Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW.  But it appears it
does.  Suspicious.

However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical.  It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.

The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.

Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.

Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information).  Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.

The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.

Fixes: 09854ba9 ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.

Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.

Note for backporting: this patch requires d5afa82c ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.

Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 3710e809.

Since idm_base and nicpm_base are still optional resources not present
on all platforms, this breaks the driver for everything except Northstar
2 (which has both).

The same change was already reverted once with 755f5738 ("net:
broadcom: fix a mistake about ioremap resource").

So let's do it again.

Fixes: 3710e809 ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[florian: Added comments to explain the resources are optional]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While examining is_ucounts_overlimit and reading the various messages
I realized that is_ucounts_overlimit fails to deal with counts that
may have wrapped.

Being wrapped should be a transitory state for counts and they should
never be wrapped for long, but it can happen so handle it.

Cc: stable@vger.kernel.org
Fixes: 21d1c5e3 ("Reimplement RLIMIT_NPROC on top of ucounts")
Link: https://lkml.kernel.org/r/20220216155832.680775-5-ebiederm@xmission.comReviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts.  So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.

This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.

Fixing the existing logic will be the subject of another series of
changes.

Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220216155832.680775-4-ebiederm@xmission.com
Fixes: 21d1c5e3 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Michal Koutný <mkoutny@suse.com> wrote:
> Tasks are associated to multiple users at once. Historically and as per
> setrlimit(2) RLIMIT_NPROC is enforce based on real user ID.
>
> The commit 21d1c5e3 ("Reimplement RLIMIT_NPROC on top of ucounts")
> made the accounting structure "indexed" by euid and hence potentially
> account tasks differently.
>
> The effective user ID may be different e.g. for setuid programs but
> those are exec'd into already existing task (i.e. below limit), so
> different accounting is moot.
>
> Some special setresuid(2) users may notice the difference, justifying
> this fix.

I looked at cred->ucount and it is only used for rlimit operations
that were previously stored in cred->user.  Making the fact
cred->ucount can refer to a different user from cred->user a bug,
affecting all uses of cred->ulimit not just RLIMIT_NPROC.

Fix set_cred_ucounts to always use the real uid not the effective uid.

Further simplify set_cred_ucounts by noticing that set_cred_ucounts
somehow retained a draft version of the check to see if alloc_ucounts
was needed that checks the new->user and new->user_ns against the
current_real_cred().  Remove that draft version of the check.

All that matters for setting the cred->ucounts are the user_ns and uid
fields in the cred.

Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220207121800.5079-4-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-3-ebiederm@xmission.comReported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e3 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>