Pull thread fixes from Christian Brauner:
 "A few fixes and minor improvements:

   - Correctly validate the cgroup file descriptor when clone3() is used
     with CLONE_INTO_CGROUP.

   - Check that a new enough version of struct clone_args is passed
     which supports the cgroup file descriptor argument when
     CLONE_INTO_CGROUP is set in the flags argument.

   - Catch nonsensical struct clone_args layouts at build time.

   - Catch extensions of struct clone_args without updating the uapi
     visible size definitions at build time.

   - Check whether the signal is valid early in kill_pid_usb_asyncio()
     before doing further work.

   - Replace open-coded rcu_read_lock()+kill_pid_info()+rcu_read_unlock()
     sequence in kill_something_info() with kill_proc_info() which is a
     dedicated helper to do just that"

* tag 'for-linus-2020-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  clone3: add build-time CLONE_ARGS_SIZE_VER* validity checks
  clone3: add a check for the user struct size if CLONE_INTO_CGROUP is set
  clone3: fix cgroup argument sanity check
  signal: use kill_proc_info instead of kill_pid_info in kill_something_info
  signal: check sig before setting info in kill_pid_usb_asyncio

Pull i2c fixes from Wolfram Sang:
 "Some driver bugfixes and an old API removal now that all users are
  gone"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Synchronize DMA before termination
  i2c: tegra: Better handle case where CPU0 is busy for a long time
  i2c: remove i2c_new_probed_device API
  i2c: altera: use proper variable to hold errno
  i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT

Pull drm fixes from Dave Airlie:
 "Quiet enough for rc2, mostly amdgpu fixes, a couple of i915 fixes, and
  one nouveau module firmware fix:

  i915:
   - Fix guest page access by using the brand new VFIO dma r/w interface (Yan)
   - Fix for i915 perf read buffers (Ashutosh)

  amdgpu:
   - gfx10 fix
   - SMU7 overclocking fix
   - RAS fix
   - GPU reset fix
   - Fix a regression in a previous suspend/resume fix
   - Add a gfxoff quirk

  nouveau:
   - fix missing MODULE_FIRMWARE"

* tag 'drm-fixes-2020-04-18' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/sec2/gv100-: add missing MODULE_FIRMWARE()
  drm/amdgpu/gfx9: add gfxoff quirk
  drm/amdgpu: fix the hw hang during perform system reboot and reset
  drm/i915/gvt: switch to user vfio_group_pin/upin_pages
  drm/i915/gvt: subsitute kvm_read/write_guest with vfio_dma_rw
  drm/i915/gvt: hold reference of VFIO group during opening of vgpu
  drm/i915/perf: Do not clear pollin for small user read buffers
  drm/amdgpu: fix wrong vram lost counter increment V2
  drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset
  drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled
  Revert "drm/amdgpu: change SH MEM alignment mode for gfx10"

Pull documentation fixes from Jonathan Corbet:
 "A handful of fixes for reasonably obnoxious documentation issues"

* tag 'docs-fixes' of git://git.lwn.net/linux:
  scripts: documentation-file-ref-check: Add line break before exit
  scripts/kernel-doc: Add missing close-paren in c:function directives
  docs: admin-guide: merge sections for the kernel.modprobe sysctl
  docs: timekeeping: Use correct prototype for deprecated functions

Pull proc fix from Eric Biederman:
 "While running syzbot happened to spot one more oversight in my rework
  of proc_flush_task.

  The fields proc_self and proc_thread_self were not being reinitialized
  when proc was unmounted, which could cause problems if the mount of
  proc fails"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Handle umounts cleanly

Pull mtd fix from Richard Weinberger:
 "spi-nor: fix for missing directory after code refactoring"

* tag 'mtd/fixes-for-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: Compile files in controllers/ directory

Pull watchdog fix from Wim Van Sebroeck:
 "Fix restart handler in sp805 driver"

* tag 'linux-watchdog-5.7-rc2' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: sp805: fix restart handler

Pull devicetree fixes from Rob Herring:

 - Fix warnings from enabling more dtc warnings which landed in the
   merge window and didn't get fixed in time.

 - Fix some document references from DT schema conversions

 - Fix kmemleak errors in DT unittests

* tag 'devicetree-fixes-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  kbuild: check libyaml installation for 'make dt_binding_check'
  of: unittest: kmemleak in duplicate property update
  of: overlay: kmemleak in dup_and_fixup_symbol_prop()
  of: unittest: kmemleak in of_unittest_overlay_high_level()
  of: unittest: kmemleak in of_unittest_platform_populate()
  of: unittest: kmemleak on changeset destroy
  MAINTAINERS: dt: fix pointers for ARM Integrator, Versatile and RealView
  MAINTAINERS: dt: update display/allwinner file entry
  dt-bindings: iio: dac: AD5570R fix bindings errors
  dt-bindings: Fix misspellings of "Analog Devices"
  dt-bindings: pwm: Fix cros-ec-pwm example dtc 'reg' warning
  docs: dt: rockchip,dwc3.txt: fix a pointer to a renamed file
  docs: dt: fix a broken reference for a file converted to json
  docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file
  docs: dt: fix broken reference to phy-cadence-torrent.yaml
  dt-bindings: interrupt-controller: Fix loongson,parent_int_map property schema
  dt-bindings: hwmon: Fix incorrect $id paths
  dt-bindings: Fix dtc warnings on reg and ranges in examples
  dt-bindings: BD718x7 - add missing I2C bus properties
  dt-bindings: clock: syscon-icst: Remove unneeded unit name
  ...

Pull arm64 fixes from Catalin Marinas:

 - Remove vdso code trying to free unallocated pages.

 - Delete the space separator in the __emit_inst macro as it breaks the
   clang integrated assembler.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Delete the space separator in __emit_inst
  arm64: vdso: don't free unallocated pages

Pull xen update from Juergen Gross:

 - a small cleanup patch

 - a security fix for a bug in the Xen hypervisor to avoid enabling Xen
   guests to crash dom0 on an unfixed hypervisor.

* tag 'for-linus-5.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  arm/xen: make _xen_start_info static
  xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status

Pull io_uring fixes from Jens Axboe:

 - wrap up the init/setup cleanup (Pavel)

 - fix some issues around deferral sequences (Pavel)

 - fix splice punt check using the wrong struct file member

 - apply poll re-arm logic for pollable retry too

 - pollable retry should honor cancelation

 - fix setup time error handling syzbot reported crash

 - restore work state when poll is canceled

* tag 'io_uring-5.7-2020-04-17' of git://git.kernel.dk/linux-block:
  io_uring: don't count rqs failed after current one
  io_uring: kill already cached timeout.seq_offset
  io_uring: fix cached_sq_head in io_timeout()
  io_uring: only post events in io_poll_remove_all() if we completed some
  io_uring: io_async_task_func() should check and honor cancelation
  io_uring: check for need to re-wait in polled async handling
  io_uring: correct O_NONBLOCK check for splice punt
  io_uring: restore req->work when canceling poll request
  io_uring: move all request init code in one place
  io_uring: keep all sqe->flags in req->flags
  io_uring: early submission req fail code
  io_uring: track mm through current->mm
  io_uring: remove obsolete @mm_fault

Pull block fixes from Jens Axboe:

 - Fix for a driver tag leak in error handling (John)

 - Remove now defunct Kconfig selection from dasd (Stefan)

 - blk-wbt trace fiexs (Tommi)

* tag 'block-5.7-2020-04-17' of git://git.kernel.dk/linux-block:
  blk-wbt: Drop needless newlines from tracepoint format strings
  blk-wbt: Use tracepoint_string() for wbt_step tracepoint string literals
  s390/dasd: remove IOSCHED_DEADLINE from DASD Kconfig
  blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget

Pull libata fixlet from Jens Axboe:
 "Add yet another Comet Lake PCI ID for ahci"

* tag 'libata-5.7-2020-04-17' of git://git.kernel.dk/linux-block:
  ahci: Add Intel Comet Lake PCH-U PCI ID

Pull btrfs fix from David Sterba:
 "A regression fix for a warning caused by running balance and snapshot
  creation in parallel"

* tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix setting last_trans for reloc roots

Pull power management update from Rafael Wysocki:
 "Allow the operating performance points (OPP) core to be used in the
  case when the same driver is used on different platforms, some of
  which have an OPP table and some of which have a clock node (Rajendra
  Nayak)"

* tag 'pm-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Manage empty OPP tables with clk handle

Pull sound fixes from Takashi Iwai:
 "One significant regression fix is for HD-audio buffer preallocation.
  In 5.6 it was set to non-prompt for x86 and forced to 0, but this
  turned out to be problematic for some applications, hence it gets
  reverted. Distros would need to restore CONFIG_SND_HDA_PREALLOC_SIZE
  value to the earlier values they've used in the past.

  Other than that, we've received quite a few small fixes for HD-audio
  and USB-audio. Most of them are for dealing with the broken TRX40
  mobos and the runtime PM without HD-audio codecs"

* tag 'sound-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: call runtime_allow() for all hda controllers
  ALSA: hda: Allow setting preallocation again for x86
  ALSA: hda: Explicitly permit using autosuspend if runtime PM is supported
  ALSA: hda: Skip controller resume if not needed
  ALSA: hda: Keep the controller initialization even if no codecs found
  ALSA: hda: Release resources at error in delayed probe
  ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq ops
  ALSA: hda: Don't release card at firmware loading error
  ALSA: usb-audio: Check mapping at creating connector controls, too
  ALSA: usb-audio: Don't create jack controls for PCM terminals
  ALSA: usb-audio: Don't override ignore_ctl_error value from the map
  ALSA: usb-audio: Filter error from connector kctl ops, too
  ALSA: hda/realtek - Enable the headset mic on Asus FX505DT
  ALSA: ctxfi: Remove unnecessary cast in kfree

If you run 'make dtbs_check' without installing the libyaml package,
the error message "dtc needs libyaml ..." is shown.

This should be checked also for 'make dt_binding_check' because dtc
needs to validate *.example.dts extracted from *.yaml files.

It is missing since commit 4f0e3a57 ("kbuild: Add support for DT
binding schema checks"), but this fix-up is applicable only after commit
e10c4321 ("kbuild: allow to run dt_binding_check and dtbs_check
in a single command").

I gave the Fixes tag to the latter in case somebody is interested in
back-porting this.

Fixes: e10c4321 ("kbuild: allow to run dt_binding_check and dtbs_check in a single command")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Drop needless newlines from tracepoint format strings, they only add
empty lines to perf tracing output.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use tracepoint_string() for string literals that are used in the
wbt_step tracepoint, so that userspace tools can display the string
content.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

CONFIG_IOSCHED_DEADLINE was removed with
commit f382fb0b ("block: remove legacy IO schedulers")

and setting of the scheduler was removed with
commit a5fd8ddc ("s390/dasd: remove setting of scheduler from driver").

So get rid of the select.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 5 of 5.

When overlay 'overlay_bad_add_dup_prop' is applied, the apply code
properly detects that a memory leak will occur if the overlay is removed
since the duplicate property is located in a base devicetree node and
reports via printk():

  OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail
  OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail

The overlay is removed when the apply code detects multiple changesets
modifying the same property.  This is reported via printk():

  OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail

As a result of this error, the overlay is removed resulting in the
expected memory leak.

Add another device node level to the overlay so that the duplicate
property is located in a node added by the overlay, thus no memory
leak will occur when the overlay is removed.

Thus users of kmemleak will not have to debug this leak in the future.

Fixes: 2fe0e876 ("of: overlay: check prevents multiple fragments touching same property")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.

target_path was not freed in the non-error path.

Fixes: e0a58f3e ("of: overlay: remove a dependency on device node full_name")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 3 of 5.

of_unittest_overlay_high_level() failed to kfree the newly created
property when the property named 'name' is skipped.

Fixes: 39a751a4 ("of: change overlay apply input data from unflattened to FDT")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.

of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices).  Fix the platform
device reference counts so that the memory will be freed.

Fixes: fb2caa50 ("of/selftest: add testcase for nodes with same name and address")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.

of_unittest_changeset() reaches deeply into the dynamic devicetree
functions.  Several nodes were left with an elevated reference
count and thus were not properly cleaned up.  Fix the reference
counts so that the memory will be freed.

Fixes: 201c910b ("of: Transactional DT support.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

There's a conversion from a plain text binding file into 4 yaml ones.
The old file got removed, causing this new warning:

	Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/arm/arm-boards

Address it by replacing the old reference by the new ones

Fixes: 4b900070 ("dt-bindings: arm: Add Versatile YAML schema")
Fixes: 2d483550 ("dt-bindings: arm: Drop the non-YAML bindings")
Fixes: 7db625b9 ("dt-bindings: arm: Add RealView YAML schema")
Fixes: 4fb00d90 ("dt-bindings: arm: Add Versatile Express and Juno YAML schema")
Fixes: 33fbfb3e ("dt-bindings: arm: Add Integrator YAML schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Changeset f5a98bfe ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
split Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
into several files. Yet, it kept the old place at MAINTAINERS.

Update it to point to the new place.

Fixes: f5a98bfe ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Replaced num property with reg property, fixed errors
reported by dt-binding-check.

Fixes: ea52c212 ("dt-bindings: iio: dac: Add docs for AD5770R DAC")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
[robh: Fix required property list, fix Fixes tag]
Signed-off-by: Rob Herring <robh@kernel.org>

I made a mistake with my previous fix, I assumed that we didn't need to
mess with the reloc roots once we were out of the part of relocation where
we are actually moving the extents.

The subtle thing that I missed is that btrfs_init_reloc_root() also
updates the last_trans for the reloc root when we do
btrfs_record_root_in_trans() for the corresponding fs_root.  I've added a
comment to make sure future me doesn't make this mistake again.

This showed up as a WARN_ON() in btrfs_copy_root() because our
last_trans didn't == the current transid.  This could happen if we
snapshotted a fs root with a reloc root after we set
rc->create_reloc_tree = 0, but before we actually merge the reloc root.

Worth mentioning that the regression produced the following warning
when running snapshot creation and balance in parallel:

  BTRFS info (device sdc): relocating block group 30408704 flags metadata|dup
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 12823 at fs/btrfs/ctree.c:191 btrfs_copy_root+0x26f/0x430 [btrfs]
  CPU: 0 PID: 12823 Comm: btrfs Tainted: G        W 5.6.0-rc7-btrfs-next-58 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
  RIP: 0010:btrfs_copy_root+0x26f/0x430 [btrfs]
  RSP: 0018:ffffb96e044279b8 EFLAGS: 00010202
  RAX: 0000000000000009 RBX: ffff9da70bf61000 RCX: ffffb96e04427a48
  RDX: ffff9da733a770c8 RSI: ffff9da70bf61000 RDI: ffff9da694163818
  RBP: ffff9da733a770c8 R08: fffffffffffffff8 R09: 0000000000000002
  R10: ffffb96e044279a0 R11: 0000000000000000 R12: ffff9da694163818
  R13: fffffffffffffff8 R14: ffff9da6d2512000 R15: ffff9da714cdac00
  FS:  00007fdeacf328c0(0000) GS:ffff9da735e00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000055a2a5b8a118 CR3: 00000001eed78002 CR4: 00000000003606f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ? create_reloc_root+0x49/0x2b0 [btrfs]
   ? kmem_cache_alloc_trace+0xe5/0x200
   create_reloc_root+0x8b/0x2b0 [btrfs]
   btrfs_reloc_post_snapshot+0x96/0x5b0 [btrfs]
   create_pending_snapshot+0x610/0x1010 [btrfs]
   create_pending_snapshots+0xa8/0xd0 [btrfs]
   btrfs_commit_transaction+0x4c7/0xc50 [btrfs]
   ? btrfs_mksubvol+0x3cd/0x560 [btrfs]
   btrfs_mksubvol+0x455/0x560 [btrfs]
   __btrfs_ioctl_snap_create+0x15f/0x190 [btrfs]
   btrfs_ioctl_snap_create_v2+0xa4/0xf0 [btrfs]
   ? mem_cgroup_commit_charge+0x6e/0x540
   btrfs_ioctl+0x12d8/0x3760 [btrfs]
   ? do_raw_spin_unlock+0x49/0xc0
   ? _raw_spin_unlock+0x29/0x40
   ? __handle_mm_fault+0x11b3/0x14b0
   ? ksys_ioctl+0x92/0xb0
   ksys_ioctl+0x92/0xb0
   ? trace_hardirqs_off_thunk+0x1a/0x1c
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x5c/0x280
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7fdeabd3bdd7

Fixes: 2abc726a ("btrfs: do not init a reloc root if we aren't relocating")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Fix the following sparse warning:

arch/arm64/xen/../../arm/xen/enlighten.c:39:19: warning: symbol
'_xen_start_info' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200415084853.5808-1-yanaijie@huawei.comSigned-off-by: Juergen Gross <jgross@suse.com>

Pull NFS client bugfix from Trond Myklebust:
 "Fix an ABBA spinlock issue in pnfs_update_layout()"

* tag 'nfs-for-5.7-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix an ABBA spinlock issue in pnfs_update_layout()

Merge tag 'tag-chrome-platform-fixes-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome-platform fixes from Benson Leung:
 "Two small fixes for cros_ec_sensorhub_ring.c, addressing issues
  introduced in the cros_ec_sensorhub FIFO support commit"

* tag 'tag-chrome-platform-fixes-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_sensorhub: Add missing '\n' in log messages
  platform/chrome: cros_ec_sensorhub: Off by one in cros_sensorhub_send_sample()

Pull networking fixes from David Miller:

 1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.

 2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.

 3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.

 4) Adjust icmp6 message source address selection when routes have a
    preferred source address set, from Tim Stallard.

 5) Be sure to validate HSR protocol version when creating new links,
    from Taehee Yoo.

 6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
    non-initial namespaces, from Michael Weiß.

 7) Missing release firmware call in mlx5, from Eran Ben Elisha.

 8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
    Taehee Yoo.

 9) Fix pause frame negotiation in marvell phy driver, from Clemens
    Gruber.

10) Record RX queue early enough in tun packet paths such that XDP
    programs will see the correct RX queue index, from Gilberto Bertin.

11) Fix double unlock in mptcp, from Florian Westphal.

12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.

13) marvell10g needs to soft reset PHY when coming out of low power
    mode, from Russell King.

14) Fix MTU setting regression in stmmac for some chip types, from
    Florian Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  amd-xgbe: Use __napi_schedule() in BH context
  mISDN: make dmril and dmrim static
  net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
  net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
  tipc: fix incorrect increasing of link window
  Documentation: Fix tcp_challenge_ack_limit default value
  net: tulip: make early_486_chipsets static
  dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
  ipv6: remove redundant assignment to variable err
  net/rds: Use ERR_PTR for rds_message_alloc_sgs()
  net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
  selftests/bpf: Check for correct program attach/detach in xdp_attach test
  libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
  libbpf: Always specify expected_attach_type on program load if supported
  xsk: Add missing check on user supplied headroom size
  mac80211: fix channel switch trigger from unknown mesh peer
  mac80211: fix race in ieee80211_register_hw()
  net: marvell10g: soft-reset the PHY when coming out of low power
  net: marvell10g: report firmware version
  net/cxgb4: Check the return from t4_query_params properly
  ...

The driver uses __napi_schedule_irqoff() which is fine as long as it is
invoked with disabled interrupts by everybody. Since the commit
mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq
context. This may lead to list corruption if another driver uses
__napi_schedule_irqoff() in IRQ context.

Use __napi_schedule() which safe to use from IRQ and softirq context.

Fixes: 85b85c85 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following sparse warning:

drivers/isdn/hardware/mISDN/mISDNisar.c:746:12: warning: symbol 'dmril'
was not declared. Should it be static?
drivers/isdn/hardware/mISDN/mISDNisar.c:749:12: warning: symbol 'dmrim'
was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit bfcb8132 ("net: dsa:
configure the MTU for switch ports") my Lamobo R1 platform which uses
an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail
by rejecting a MTU of 1536. The reason for that is that the DMA
capabilities are not readable on this version of the IP, and there
is also no 'tx-fifo-depth' property being provided in Device Tree. The
property is documented as optional, and is not provided.

Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so
provide these values through platform data as an immediate fix until
various Device Tree sources get updated accordingly.

Fixes: eaf4fac4 ("net: stmmac: Do not accept invalid MTU values")
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN
Control register must be set to Consistent to let tagged frames pass
through as is, otherwise their tags will be stripped.

Fixes: 83163f7d ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to https://www.analog.com/, the company name is spelled
"Analog Devices".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull SELinux fix from Paul Moore:
 "One small SELinux fix to ensure we cleanup properly on an error
  condition"

* tag 'selinux-pr-20200416' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: free str on error in str_read()

Pull ceph fixes from Ilya Dryomov:

 - a set of patches for a deadlock on "rbd map" error path

 - a fix for invalid pointer dereference and uninitialized variable use
   on asynchronous create and unlink error paths.

* tag 'ceph-for-5.7-rc2' of git://github.com/ceph/ceph-client:
  ceph: fix potential bad pointer deref in async dirops cb's
  rbd: don't mess with a page vector in rbd_notify_op_lock()
  rbd: don't test rbd_dev->opts in rbd_dev_image_release()
  rbd: call rbd_dev_unprobe() after unwatching and flushing notifies
  rbd: avoid a deadlock on header_rwsem when flushing notifies