Instead of dereferencing pdev everywhere, just store the address of the
underlying struct device in a local variable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>

This is a tristate module, it can be unloaded. We need to cleanup properly
and unregister from the interrupt notifier on driver detach.

Fixes: b3241565 ("gpio: eic-sprd: use atomic notifiers to notify all chips about irqs")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>

gpiochip_get_desc() now lives in linux/gpio/driver.h and there is no
longer any need to include GPIOLIB's private header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

It makes sense for a GPIO driver to want to get its own descriptor
without requesting it. After all, the driver knows that it'll still be
valid. Let's move this helper to linux/gpio/driver.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

gpiod_is_active_low() is defined in linux/gpio/consumer.h. It's only
because we're pulling in the gpiolib.h private header that we get this
declaration implicitly but let's fix it as that is going away soon.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

We access internals of struct gpio_device and struct gpio_desc because
it's easier but it can actually be avoided and we're working towards a
better encapsulation of GPIO data structures across the kernel so let's
start at home.

Instead of checking gpio_desc flags, let's just track the requests of
GPIOs in the driver. We also already store the information about
direction of simulated lines.

For kobjects needed by sysfs callbacks: we can iterate over the children
devices of the top-level platform device and compare their fwnodes
against the one passed to the init function from probe.

While at it: fix one line break and remove the untrue part about
configfs callbacks using dev_get_drvdata() from a comment.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge tag 'platform-drivers-x86-ib-x86-android-tablets-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into gpio/for-next

Immutable branch between pdx86 android tablets branch and GPIO due for the v6.7 merge window

ib-x86-android-tablets-v6.7: v6.6-rc1 + ib-pdx86-android-tablets
for merging into the GPIO subsystem for v6.7.

The "linux,power-supply-name" property is a left-over from an earlier
attempt to allow properties to specify the power_supply class-device name.

The patch to read this property never made it upstream (and is no longer
necessary). Drop the unused property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-9-hdegoede@redhat.com

Use the new x86-android-tablets platform-device as gpio-keys parent
to make it clear that this gpio-keys device was instantiated by
the x86-android-tablets driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-8-hdegoede@redhat.com

Refactor x86_android_tablet_get_gpiod() to no longer use
gpiolib private functions like gpiochip_find().

As a bonus this allows specifying that the GPIO is active-low,
like the /CE (charge enable) pin on the bq25892 charger on
the Lenovo Yoga Tablet 3.
Reported-by: Bartosz Golaszewski <brgl@bgdev.pl>
Closes: https://lore.kernel.org/platform-driver-x86/20230905185309.131295-12-brgl@bgdev.pl/Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-7-hdegoede@redhat.com

Create a platform_device from module_init() and change
x86_android_tablet_init() / cleanup() into platform_device
probe() and remove() functions.

This is a preparation patch for refactoring x86_android_tablet_get_gpiod()
to no longer use gpiolib private functions like gpiochip_find().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-6-hdegoede@redhat.com

x86_dev_info.invalid_aei_gpiochip is no longer used by any boards
and the x86-android-tablets code should not use the gpiolib private
acpi_gpiochip_free_interrupts() function.
Reported-by: Bartosz Golaszewski <brgl@bgdev.pl>
Closes: https://lore.kernel.org/platform-driver-x86/20230905185309.131295-12-brgl@bgdev.pl/Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-5-hdegoede@redhat.com

Remove the invalid_aei_gpiochip setting from the x86_dev_info
for the Peaq C1010.

This is no longer necessary since there now is a quirk to ignore
the "dolby" button GPIO in gpiolib_acpi_quirks[] in
drivers/gpio/gpiolib-acpi.c .
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-4-hdegoede@redhat.com

On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
a "dolby" button. At the ACPI level an _AEI event-handler
is connected which sets an ACPI variable to 1 on both
edges. This variable can be polled + cleared to 0 using WMI.

Since the variable is set on both edges the WMI interface is pretty
useless even when polling. So instead of writing a custom WMI
driver for this the x86-android-tablets code instantiates
a gpio-keys platform device for the "dolby" button.

Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
so that it is not seen as busy when the gpio-keys driver requests it.

Note this replaces a hack in x86-android-tablets where it would
call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
controller. acpi_gpiochip_free_interrupts() is considered private
(internal) gpiolib API so x86-android-tablets should stop using it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@redhat.com

In some cases where a broken AEI is present for a GPIO and the GPIO
is listed in the ignore_interrupt list to avoid the broken event
handler, the kernel may want to use the GPIO for another purpose.

Before this change trying to use such a GPIO for another purpose would
fail, because the ignore_interrupt list was only checked after
the acpi_request_own_gpiod() call, causing the GPIO to already be
claimed even though it is listed in the ignore_interrupt list.

Fix this by moving the ignore_interrupt list to above
the acpi_request_own_gpiod() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-2-hdegoede@redhat.com

Calling gpiochip_find() from interrupt handler in this driver is an
abuse of the GPIO API. It only happens to work because nobody added a
might_sleep() to it and the lock used by GPIOLIB is a spinlock.

Both will soon be changed as we're limiting both the number of
interfaces allowed to be called from atomic context as well as making
struct gpio_chip private to the GPIO code that owns it. We'll also
switch to protecting the global GPIO device list with a mutex as there
is no reason to allow changes to it from interrupt handlers.

Instead of iterating over all SPRD chips and looking up each
corresponding GPIO chip, let's make each SPRD GPIO controller register
with a notifier chain. The chain will be called at interrupt so that
every chip that already probed will be notified. The rest of the
interrupt handling remains the same. This should result in faster code as
we're avoiding iterating over the list of all GPIO devices.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Tested-by: Wenhua Lin <wenhua.lin@unisoc.com>

The gpiolib.h is unnecessarily included in the driver. None of its
symbols are used so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The gpiolib.h is unnecessarily included in the driver. None of its
symbols are used so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The gpiolib.h is unnecessarily included in the driver. None of its
symbols are used so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

'extern' doesn't do anything for function declarations. Remove it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Fix a double newline in the GPIO provider header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

According to the comments in linux/notifier.h, the code to return when a
notifications is "not for us" is NOTIFY_DONE, not NOTIFY_OK.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

There are no and never have been any users of gpiod_set_transitory()
outside the core GPIOLIB code. Make it private.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Don't include gpiolib.h. Track the request status of lines locally
instead. In order to retrieve the device name use the fact that
gpio-mockup supports only a single GPIO device per platform device and
call device_find_any_child().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Use lock from linux/cleanup.h and simplify locking paths.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

We have a much better alternative to the clunky old gpio-mockup. Don't
remove it just yet (there are tests depending on it out there) but make
Kconfig say that it should no longer be used in new projects.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

The desc assigned to debugfs private structure is unused so remove it.

Fixes: 9202ba23 ("gpio: mockup: implement event injecting over debugfs")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

The pull field of the line state struct is undocumented. Fix it.

Fixes: 2a9e2740 ("gpio: mockup: rework debugfs interface")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

switch pin base from static to automatic allocation to
avoid conflicts and align with other gpio chip drivers
Signed-off-by: xingtong.wu <xingtong.wu@siemens.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Some of the headers are not use, some are missing. Fix that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In a few functions goto label is useless as there are no locking,
no nothing that may justify its usage. Get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

SIMPLE_DEV_PM_OPS() is deprecated, replace it with pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() for setting the driver's PM routines.
We can now remove the ifdeffery surrounding the suspend and resume
functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

We have a temporary variable to keep pointer to struct gpio_chip.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

We have a temporary variable to keep pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Use macros defined in linux/cleanup.h to automate resource lifetime
control in gpio-pca953x.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Split regcache handling to the respective helpers. It will allow to
have further refactoring with ease.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

At least in pca953x_irq_setup() we may use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Curtrently the error path is unsynchronised with removal due to
regulator being disabled before other device managed resources
are handled. Correct that by wrapping regulator enablement in
the respective call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

New code should solely use firmware nodes for the specifics and
not any callbacks.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>