- 20 Apr, 2023 23 commits
-
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/spmi/spmi-mtk-pmif.c:517:34: error: ‘mtk_spmi_match_table’ defined but not used [-Werror=unused-const-variable=] Link: https://lore.kernel.org/r/20230310222857.315629-2-krzysztof.kozlowski@linaro.orgReviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230413223834.4084793-5-sboyd@kernel.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20230306073446.2194048-4-u.kleine-koenig@pengutronix.deSigned-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20230306073446.2194048-3-u.kleine-koenig@pengutronix.deReviewed-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/r/20230306073446.2194048-2-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Krzysztof Kozlowski authored
Core already prints detailed reports on out of memory: WARNING: Possible unnecessary 'out of memory' message Signed-off-by:
-
Krzysztof Kozlowski authored
Core already prints detailed reports on out of memory: WARNING: Possible unnecessary 'out of memory' message Signed-off-by:
-
Krzysztof Kozlowski authored
Replace GPLv2 license text with SPDX and drop unnecessary file name in comment to fix checkpatch warnings: WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 WARNING: It's generally not useful to have the filename in the file Signed-off-by:
-
Krzysztof Kozlowski authored
omap-hdq does not depend on anything from ARCH_OMAP for building. Signed-off-by:
-
Krzysztof Kozlowski authored
Core already prints detailed reports on out of memory: WARNING: Possible unnecessary 'out of memory' message Signed-off-by:
-
Krzysztof Kozlowski authored
Switch to inline as preferred by coding style: WARNING: plain inline is preferred over __inline__ Signed-off-by:
-
Krzysztof Kozlowski authored
linux/io.h is preferred over asm/io.h: WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by:
-
Krzysztof Kozlowski authored
Assignments in if condition are less readable and error-prone. Fixes also checkpatch warning: ERROR: do not use assignment in if condition Signed-off-by:
-
Krzysztof Kozlowski authored
linux/delay.h is already included, so drop asm header to also fix checkpatch: WARNING: Use #include <linux/delay.h> instead of <asm/delay.h> Signed-off-by:
-
Krzysztof Kozlowski authored
Assignments in if condition are less readable and error-prone. Fixes also checkpatch warning: ERROR: do not use assignment in if condition Signed-off-by:
-
Krzysztof Kozlowski authored
Improve code readability and checkpatch warnings: WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. Signed-off-by:
-
Krzysztof Kozlowski authored
Correct several coding convention violations around white-spaces: ERROR: spaces required around that '=' (ctx:VxV) WARNING: Missing a blank line after declarations ERROR: "foo* bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line WARNING: please, no space before tabs WARNING: Missing a blank line after declarations ERROR: open brace '{' following struct go on the same line ERROR: that open brace { should be on the previous line Signed-off-by: -
Krzysztof Kozlowski authored
Correct kerneldoc comments (or drop annotation) to fix: w1_ds28e04.c:57: warning: This comment starts with '/**', but isn't a kernel-doc comment. w1_ds28e04.c:149: warning: This comment starts with '/**', but isn't a kernel-doc comment. Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Correct kerneldoc comments (or drop annotation) to fix: w1_ds2433.c:46: warning: This comment starts with '/**', but isn't a kernel-doc comment. w1_ds2433.c:141: warning: This comment starts with '/**', but isn't a kernel-doc comment. Reviewed-by:
-
Krzysztof Kozlowski authored
Drop kerneldoc annotation from comment which is not a kerneldoc to fix: w1_ds2408.c:210: warning: This comment starts with '/**', but isn't a kernel-doc comment Reviewed-by:
-
Stefan Wahren authored
The DS2484 is compatible to the DS2482-100, but also supports a pin-controlled power-saving sleep mode. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/DS2484.pdfSigned-off-by:
Stefan Wahren <stefan.wahren@chargebyte.com> Link: https://lore.kernel.org/r/20230406103137.6092-3-stefan.wahren@chargebyte.comSigned-off-by:
-
Stefan Wahren authored
This adds a dedicated devicetree binding for the Maxim DS2482/DS2484 I2C to 1-W bridges, which can be extended later for further features (e.g. sleep mode control GPIO). Since one wire is a bus, child nodes needs to be allowed here. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Evgeniy wrote that he no longer takes patches for 1-Wire/W1 subsystem, so add Krzysztof Kozlowski to help reviewing and handling these. Link: https://lore.kernel.org/all/bdcf41d5-cd61-1e95-0b21-b8fe401644bd@ioremap.net/ Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dan Carpenter authored
The svc_create_memory_pool() function returns error pointers. It never returns NULL. Fix the check. Fixes: 7ca5ce89 ("firmware: add Intel Stratix10 service layer driver") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/5f9a8cb4-5a4f-460b-9cdc-2fae6c5b7922@kili.mountainSigned-off-by:
-
- 19 Apr, 2023 3 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'coresight-next-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: Updates for v6.4 This is a relatively smaller update for CoreSight tracing subsystem targeting v6.4, with the following changes: - Removing Mathieu Poirier as MAINTAINER for the subsystem, with updates to CREDITS for his contributions. - Fix CoreSight ETM PMU to set the module field Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight: etm_pmu: Set the module field MAINTAINERS: Remove Mathieu Poirier as coresight maintainer
-
Greg Kroah-Hartman authored
Merge tag 'icc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 6.4 This pull request contains the interconnect changes for the 6.4-rc1 merge window, which this time are mostly cleanups. Core changes: interconnect: Skip call into provider if initial bw is zero interconnect: Use of_property_present() for testing DT property presence interconnect: drop racy registration API interconnect: drop unused icc_link_destroy() interface Driver changes: interconnect: qcom: Drop obsolete dependency on COMPILE_TEST interconnect: qcom: drop obsolete OSM_L3/EPSS defines interconnect: qcom: osm-l3: drop unuserd header inclusion interconnect: qcom: rpm: drop bogus pm domain attach interconnect: qcom: rpm: make QoS INVALID default interconnect: qcom: rpm: Add support for specifying channel num interconnect: qcom: Sort kerneldoc entries dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support Signed-off-by:
Georgi Djakov <djakov@kernel.org> * tag 'icc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible interconnect: qcom: Sort kerneldoc entries interconnect: qcom: rpm: Add support for specifying channel num interconnect: qcom: rpm: make QoS INVALID default interconnect: qcom: rpm: drop bogus pm domain attach interconnect: drop unused icc_link_destroy() interface interconnect: drop racy registration API interconnect: Use of_property_present() for testing DT property presence interconnect: qcom: osm-l3: drop unuserd header inclusion interconnect: qcom: drop obsolete OSM_L3/EPSS defines interconnect: Skip call into provider if initial bw is zero interconnect: qcom: Drop obsolete dependency on COMPILE_TEST
-
Greg Kroah-Hartman authored
Merge tag 'mhi-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI Host ======== Core ---- - Removed the "mhi_poll()" API as there are no in-kernel users available at the moment. - Added range check for the CHDBOFF and ERDBOFF registers in case the device reports bad values. - Fixed the errno for the rest of the range checks to use -ERANGE. - Modified the event ring handlers to ring the doorbell only if there are any pending elements in the ring to process for the device. - Removed the check for EE (Execution Environment) while processing the SYS_ERR transition as it creates device recovery issues when SBL (Secondary Bootloader) crashes early. - Used mhi_tryset_pm_state() API to set the error state instead of open coding if the firmware loading fails. This avoids the race with other pm_state updates. pci_generic ----------- - Dropped the dedundant pci_{enable/disable}_pcie_error_reporting() calls from driver probe's error path as the PCI core itself takes care of that now. - Revered the commit 2d5253a0 ("bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990") as it turned out to be erroneous. This happened due to the patch adding secondary AT port for FN990 getting applied through NET and MHI trees and this caused two commits for the same functionality but one of them ended up wrong. - Added support for Foxconn T99W510 modem based on SDX24 chipset from Qualcomm. MHI Endpoint ============ - Demoted the channel not supported error log to debug as not all devices will support all channels defined in MHI spec and this may spam users. * tag 'mhi-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state bus: mhi: host: Remove duplicate ee check for syserr bus: mhi: host: Avoid ringing EV DB if there are no elements to process bus: mhi: pci_generic: Add Foxconn T99W510 bus: mhi: host: Use ERANGE for BHIOFF/BHIEOFF range check bus: mhi: host: Range check CHDBOFF and ERDBOFF bus: mhi: host: pci_generic: Revert "Add a secondary AT port to Telit FN990" bus: mhi: host: pci_generic: Drop redundant pci_enable_pcie_error_reporting() bus: mhi: ep: Demote unsupported channel error log to debug bus: mhi: host: Remove mhi_poll() API
-
- 15 Apr, 2023 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 2nd set of IIO features and cleanups for the 6.4 cycle. A few more changes. Some were dependent on fixes that are now upstream and in char-misc-next. st,lsm6dsx: - Add an ACPI ID (SMO8B30) and mount matrix (ROTM) seen in the wild. ti,palmas - Take probe fully devm managed. - Add threshold event support (after some rework) - Stop changing the event config on suspend and resume. * tag 'iio-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: palmas: don't alter event config on suspend/resume iio: adc: palmas: add support for iio threshold events iio: adc: palmas: always reset events on unload iio: adc: palmas: move eventX_enable into palmas_adc_event iio: adc: palmas: use iio_event_direction for threshold polarity iio: adc: palmas: replace "wakeup" with "event" iio: adc: palmas: remove adc_wakeupX_data iio: adc: palmas: Take probe fully device managed. iio: imu: lsm6dsx: Add ACPI mount matrix retrieval iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
-
- 14 Apr, 2023 2 commits
-
-
Suzuki K Poulose authored
struct pmu::module must be set to the module owning the PMU driver. Set this for the coresight etm_pmu. Fixes: 8e264c52 ("coresight: core: Allow the coresight core driver to be built as a module") Signed-off-by:
-
Suzuki K Poulose authored
Mathieu Poirier is no longer involved in maintainig the CoreSight self-hosted tracing subsystem. Mathieu, Thank you very much creating and maintaing the subsystem all these years ! Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20230404111117.569795-1-suzuki.poulose@arm.com
-
- 13 Apr, 2023 9 commits
-
-
Patrik Dahlström authored
The event config is controlled through the IIO events subsystem and device wakeup is controlled by /sys/devices/.../power/wakeup. Let's keep those two knobs independent. Signed-off-by:
Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-10-risca@dalakolonin.seSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Patrik Dahlström authored
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This change hooks into the IIO events system and exposes to userspace the ability to configure these threshold values for each channel, but only allow up to 2 such thresholds to be enabled at any given time. Trying to enable a third channel will result in an error. Userspace is expected to input calibrated, as opposed to raw, values as threshold. However, it is not enough to do the opposite of what is done when converting the other way around. To account for tolerances in the ADC, the calculated raw threshold should be adjusted based on the ADC specifications for the device. These specifications include the integral nonlinearity (INL), offset, and gain error. To adjust the high threshold, use the following equation: (calibrated value + INL) * Gain error + offset = maximum value [1] Likewise, use the following equation for the low threshold: (calibrated value - INL) * Gain error - offset = minimum value The gain error is a combination of gain error, as listed in the datasheet, and gain error drift due to temperature and supply. The exact values for these specifications vary between palmas devices. This patch sets the values found in TWL6035, TWL6037 datasheet. [1] TI Application Report, SLIA087A, Guide to Using the GPADC in TPS65903x, TPS65917-Q1, TPS65919-Q1, and TPS65916 Devices. Signed-off-by: -
Patrik Dahlström authored
This prevents leaving the adc in freerunning mode when removing the driver. Signed-off-by:
-
Patrik Dahlström authored
It just makes more sense to have all information regarding adc events in one place. Signed-off-by:
-
Patrik Dahlström authored
Instead of having high_threshold > 0 as an indicator for upper threshold event and lower threshold event otherwise, use enum iio_event_direction instead. This is hopefully less ambiguous. Signed-off-by:
-
Patrik Dahlström authored
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This is currently used to wake up the system from sleep, but the functionality is more generic than that. As such, change the naming of functions and variables to refer to it as events instead, except during suspend and resume where wakeup still make sense. Signed-off-by:
-
Patrik Dahlström authored
It does not seem to be used by anyone and later patches in this series are made simpler by first removing this. There is now a lot of dead code that cannot be reached, until later patches revive it. Arguably, this is preferred over removing the code only to add it again. Signed-off-by:
-
Jonathan Cameron authored
Review of a recent fix highlighted that this driver could be trivially converted to be entirely devm managed. That fix should be applied to resolve the fix in a fashion easy to back port even though this change removes the relevant code. [1] https://patchwork.kernel.org/project/linux-iio/patch/20230313205029.1881745-1-risca@dalakolonin.se/Signed-off-by:
-
Jonathan Cameron authored
DSDT ROTM method seen in the wild with SMO8B30 _HID. Making assumption it is similar to that used for bmc150 plus information from Darrell that the rotation is out by 90 degrees at boot. Method (ROTM, 0, NotSerialized) { Name (RBUF, Package (0x03) { "0 -1 0", "1 0 0", "0 0 1" }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */ } Reported-by:Darrell Kavanagh <darrell.kavanagh@gmail.com> Signed-off-by:
Darrell Kavanagh <darrell.kavanagh@gmail.org> Link: https://lore.kernel.org/r/20230130201018.981024-3-jic23@kernel.orgSigned-off-by:
-
- 12 Apr, 2023 2 commits
-
-
Jonathan Cameron authored
ID seen in the wild and it is a valid ST micro ID. An offset of 1 for the device ID enum is needed when adding support for retrieving the ID from device_get_match_data() to allow detection of NULL pointer and fallback to i2c_device_id table. DSDT chunk cropped for relevant parts. Scope (_SB.PCI0.I2C5) { Device (DEV) { Name (_HID, EisaId ("SMO8B30")) // _HID: Hardware ID Name (_CID, EisaId ("SMO8B30")) // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x006A, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C5", 0x00, ResourceConsumer, , Exclusive, ) }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_._CRS.RBUF */ } Method (ROTM, 0, NotSerialized) { Name (RBUF, Package (0x03) { "0 -1 0", "1 0 0", "0 0 1" }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */ } ... Link: https://lore.kernel.org/all/20230129182441.082f29d0@jic23-huawei/Reported-by: -
Greg Kroah-Hartman authored
Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanups for the 6.4 cycle. New device support * bosch,bmp280 - Add support for BMP580 - includes significant refactoring and general driver cleanup + support for non-volatile memory for trimming and config parameters. * rohm BU27034 - New driver for this 3 channel ambient light sensor. - New support library for devices where both integration time and amplifier gain are configurable. In these cases a scale change may require changing bother underlying values. This library module provides code to help with this. * st,accel - Add support for IIS328DQ (ID only as compatible wtih LIS331DL) * st,lsm6dsx - Add support for ASM330LHB automotive MEMS sensor. * ti,ads1100, ads1000 - New driver for these 16 bit ADCs. * ti,tmp117 - Add support for older tmp116 device. Includes some general driver cleanup. Staging driver drops * adi,ade7854 - Driver was a very long way from compliant with IIO infrastructure and ABI. If anyone wants a non staging version of this driver they are better off starting from scratch. Hence drop it and the associated meter.h header. Features * adi,ad7441r - Add DT binding to set sink current for digital input. * semtech,sx9324,9360 - Support older register mapping from firmware designed for windows. Core improvements. * Move iio_trigger_poll() docs to next to the implementation and add a note on expected caller context. * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so as to use more standard / common terminology. * Improve main ABI docs references to offset and scale for raw values by making them consistent and clear. Cleanups and minor fixes: * adi,ad5592r - Add GPIO names - useful for debug. * adi,ad7441r - Fix current input, loop powered mode configuration setup. * adi,adis16475 - Fix wrong commented value for minimum advised lower rate. * adi,admv1013 - Use devm_clk_get_enabled() to reduce boilerplate. * adi,ads1210 - Fix wrong bits for writing config register (late fix and has been broken a long time so not rushed upstream) * amlogic,meson-saradc - Improve cleanup in error handling if BL30 handshake fails. * apex-embedded,stx104 - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle retries. - Add local mutex to close various races. - Use define U16_MAX rather than value for limit. - Improve code readability with minor reorganization. * atmel,ad91-sama5d2 - Drop trivial dead code. * kionix,kx022a - Drop unused structure element. * linear,ltc2983 - Reorganize bindings doc to enable unevaluatedProperties to be set in one place for all child nodes. - Make binding for adi,custom-thermocouple accept signed values. * maxim,max44000 - Add OF Device matching (of_match_table was not correctly set). * maxim,max5522 - Missing static * measurement-computing,cio-dac - Fix wrong part name in comments. - Migrate to regmap. - Improve includes by replacing bitops.h with more direct bits.h * qcom,pm8xxx-xoadc - Remove a check that can never fail. * renesas,rcar-gyroadc - DT binding documentation improvements. - Tidy up an unused warning with __maybe_unused. * semtech,sx_common - Drop docs for a structure element that doesn't exist. * semtech,sx9500 - Drop ACPI_PTR() and of_match_ptr() protections that just complicate the code / block some firmware registration types that would otherwise work. * sensiron,sps30 - Comment formatting tidy up. * st,sensors - Drop duplicate text in DT binding. * st,stm32-adc - Add some missing static markings. * ti,ads1100 - Use correct return code in dev_err_probe() call. * x-powers,axp20x_adc - precursor series to simplify addition of AXP192. - General code cleanup / minor refactoring for better readabilty of code. - Switch from boolean value to mask for adc_en2 field to avoid hard coding a mask that will be different in AXP192 * tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits) MAINTAINERS: Add ROHM BU27034 iio: light: ROHM BU27034 Ambient Light Sensor dt-bindings: iio: light: Support ROHM BU27034 MAINTAINERS: Add IIO gain-time-scale helpers iio: light: Add gain-time-scale helpers doc: Make sysfs-bus-iio doc more exact iio: dac: set variable max5522_channels storage-class-specifier to static dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll iio: addac: stx104: Migrate to the regmap API iio: addac: stx104: Improve indentation in stx104_write_raw() iio: addac: stx104: Use define rather than hardcoded limit for write val iio: addac: stx104: Fix race condition when converting analog-to-digital iio: addac: stx104: Fix race condition for stx104_write_raw() dt-bindings: iio: st-sensors: Fix repeated text staging: iio: resolver: ads1210: fix config mode iio: adc: ti-ads1100: fix error code in probe() iio: accel: add support for IIS328DQ variant dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer ...
-
