- 11 Jan, 2009 31 commits
-
-
Manuel Lauss authored
The current mips clock build infrastructure lets a system only use either the MIPS cp0 counter or a SoC specific timer as a clocksource / clockevent device. This patch renames the core cp0 counter clocksource / clockevent functions from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to call these renamed functions instead. Chips which can detect whether it is safe to use a chip-specific timer can now fall back on the cp0 counter if necessary and possible (e.g. Alchemy with a follow-on patch). Existing behaviour is not changed in any way. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Manuel Lauss authored
Remove the cpu_table: - move detection of whether c0_config[OD] is read-only and should be set to fix various chip errata to au1000 headers. - move detection of write-only sys_cpupll to au1000 headers. - remove the BCLK switching code: Activation of this features should be left to the boards using the chips since it also affects external devices tied to BCLK, and only the board designers know whether it is safe to enable. Signed-off-by:
-
Manuel Lauss authored
There are no in-tree users, so remove them. Signed-off-by:
-
Manuel Lauss authored
Add the name set by set_irq_chip_and_handler_name() to the output of /proc/interrupts, like so: db1200 ~ # cat /proc/interrupts CPU0 8: 52 Alchemy-IC0-hilevel serial 10: 171 Alchemy-IC0-hilevel au1xxx-mmc 11: 47 Alchemy-IC0-hilevel Au1xxx dbdma 18: 1 Alchemy-IC0-hilevel au1550-spi 29: 1250997 Alchemy-IC0-riseedge timer 37: 211 Alchemy-IC0-hilevel ehci_hcd:usb1, ohci_hcd:usb2 38: 0 Alchemy-IC0-hilevel lcd 72: 2623 DB1200 CPLD-level ide0 73: 257 DB1200 CPLD-level eth0 84: 1 DB1200 CPLD-level sd_insert 85: 0 DB1200 CPLD-level sd_eject ERR: 0 Signed-off-by: -
Manuel Lauss authored
Tested on Db1200. Signed-off-by:
-
Manuel Lauss authored
This patch attempts to modernize core Alchemy interrupt handling code. - add irq_chips for irq controllers instead of irq type, - add a set_type() hook to change irq trigger type during runtime, - add a set_wake() hook to control GPIO0..7 based wakeup, - use linux' IRQF_TRIGGER_ constants instead of homebrew ones, - enable GENERIC_HARDIRQS_NO__DO_IRQ. - simplify plat_irq_dispatch - merge au1xxx_irqmap into irq.c file, the only place where its contents are referenced. - board_init_irq() is now mandatory for every board; use it to register the remaining (gpio-based) interrupt sources; update all boards accordingly. Run-tested on Db1200 and other Au1200 based platforms. Signed-off-by:
-
Manuel Lauss authored
Not every alchemy-based board might want these options forced on it, and most of this stuff seems to be intended for devboard code anyway. Remove commandline mangling code out of common chip code and instead add relevant sections to all in-tree boards to not change existing behaviour. Signed-off-by:
-
Manuel Lauss authored
Share some code and merge small files: - Extract the prom init code from all devboard files (they only differ in memory configuration). - Merge the irq configuration into board setup code. - Merge smaller files into board setup code. Signed-off-by:
-
Manuel Lauss authored
This should ease sharing of common devboard code. Signed-off-by:
-
David Daney authored
Signed-off-by:
Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
We add a dev parameter to plat_unmap_dma_mem(), and hooks for plat_dma_supported() and plat_extra_sync_for_device() which should be nop changes for all existing targets. Signed-off-by:
-
David Daney authored
Expand the case statement for build_tlb_write_entry so that it does the right thing on Cavium CPU variants. Signed-off-by:
Paul Gortmaker <Paul.Gortmaker@windriver.com> Signed-off-by:
-
David Daney authored
For Cavium OCTEON, compute the return epc value for OCTEON specific branch instructions. Signed-off-by:
-
David Daney authored
For OCTEON, implement a save and restore of the multiplier state across context switches. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
Add in the cop2 and cvmseg state info to the known proc reg data for Cavium so that it can be tracked, saved, restored. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
Take all the OCTEON specific files that were added, and hook them into the build system for the arch/mips. For versions of GCC that lack OCTEON support, override gas target architecture. Signed-off-by:
-
David Daney authored
Follow precedent of other boards, and hook-up the CPU specific cache init. Signed-off-by:
-
David Daney authored
Add OCTEON constants to asm/cpu.h and asm/module.h. Add probe function for Cavium OCTEON CPUs and hook it up. Signed-off-by:
-
David Daney authored
Gas from binutils 2.19 fails to compile some cop1 instructions with -march=octeon. Since the cop1 instructions are present in mips1, use that arch instead. This will be fixed in binutils 2.20. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
David Daney authored
If on Cavium, be aware of cop2 and hwrena during do_cpu(). Signed-off-by:
-
David Daney authored
For Cavium CPU, we treat the same as R10000, in that all hazards are dealt with in hardware. Signed-off-by:
-
David Daney authored
These are the rest of the new files needed to add OCTEON processor support to the Linux kernel. Other than Makefile and Kconfig which should be obvious, we have: csrc-octeon.c -- Clock source driver for OCTEON. dma-octeon.c -- Helper functions for mapping DMA memory. flash_setup.c -- Register on-board flash with the MTD subsystem. octeon-irq.c -- OCTEON interrupt controller managment. octeon-memcpy.S -- Optimized memcpy() implementation. serial.c -- Register 8250 platform driver and early console. setup.c -- Early architecture initialization. smp.c -- OCTEON SMP support. octeon_switch.S -- Scheduler context switch for OCTEON. c-octeon.c -- OCTEON cache controller support. cex-oct.S -- OCTEON cache exception handler. asm/mach-cavium-octeon/*.h -- Architecture include files. Signed-off-by:
-
David Daney authored
MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon/executive and asm/octeon. These files are used to coordinate resource sharing between all of the programs running on the OCTEON SOC. The OCTEON processor has many CPU cores (current parts have up to 16, but more are possible). It also has a variety of on-chip hardware blocks for things like network acceleration, encryption and RAID. One typical configuration is to run Linux on several of the CPU cores, and other dedicated applications on the other cores. Resource allocation between the various programs running on the system (Linux kernel and other dedicated applications) needs to be coordinated. The code we use to do this we call the 'executive'. All of this resource allocation and sharing code is gathered together in the executive directory. Included in the patch set are the following files: cvmx-bootmem.c and cvmx-sysinfo.c -- Coordinate memory allocation. All memory used by the Linux kernel is obtained here at boot time. cvmx-l2c.c -- Coordinates operations on the shared level 2 cache. octeon-model.c -- Probes chip capabilities and version. The corresponding headers are in asm/octeon. Signed-off-by:
-
David Daney authored
Here we define the addresses and bit-fields of the Configuration and Status Registers (CSRs) for some of the hardware functional units on the OCTEON SOC. Definitions are needed for: CIU -- Central Interrupt Unit. GPIO -- General Purpose Input Output. IOB -- Input / Output {Busing,Bridge}. IPD -- Input Packet Data unit. L2C -- Level-2 Cache controller. L2D -- Level-2 Data cache. L2T -- Level-2 cache Tag. LED -- Light Emitting Diode controller. MIO -- Miscellaneous Input / Output. POW -- Packet Order / Work unit. Signed-off-by: -
Julia Lawall authored
Since memsize is unsigned, it would seem better to use strict_strtoul that strict_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @s2@ long e; position p; @@ strict_strtol@p(...,&e) @@ position p != s2.p; type T; T e; @@ - strict_strtol@p + strict_strtoul (...,&e) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Anirban Sinha authored
Signed-off-by:
Anirban Sinha <asinha@zeugmasystems.com> Signed-off-by:
-
- 10 Jan, 2009 9 commits
-
-
Linus Torvalds authored
-
Arjan van de Ven authored
It is useful for diagnosing boot performance to see where async function calls are waiting on serialization... this patch adds this functionality to the bootgraph.pl script. The waiting time is shown as a half transparent, gray bar through the block that is waiting. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arjan van de Ven authored
In a discussio with Jeff Garzik, he mentioned that the serialization for the libata port probes only needs to be within the domain of a host. This means that for the first port of each host (with ID 0), we don't need to wait, so we can relax our serialization a little. Signed-off-by:
-
Arjan van de Ven authored
This patch adds a per host flag that allows drivers to opt in into having its busses scanned in parallel. Drivers that do not set this flag get their ports scanned in the "original" sequence. Signed-off-by:
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits) x86: fix section mismatch warnings in mcheck/mce_amd_64.c x86: offer frame pointers in all build modes x86: remove duplicated #include's x86: k8 numa register active regions later x86: update Alan Cox's email addresses x86: rename all fields of mpc_table mpc_X to X x86: rename all fields of mpc_oemtable oem_X to X x86: rename all fields of mpc_bus mpc_X to X x86: rename all fields of mpc_cpu mpc_X to X x86: rename all fields of mpc_intsrc mpc_X to X x86: rename all fields of mpc_lintsrc mpc_X to X x86: rename all fields of mpc_iopic mpc_X to X x86: irqinit_64.c init_ISA_irqs should be static Documentation/x86/boot.txt: payload length was changed to payload_length x86: setup_percpu.c fix style problems x86: irqinit_64.c fix style problems x86: irqinit_32.c fix style problems x86: i8259.c fix style problems x86: irq_32.c fix style problems x86: ioport.c fix style problems ...
-
Linus Torvalds authored
Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: [IA64] fix typo in cpumask_of_pcibus() x86: fix x86_32 builds for summit and es7000 arch's cpumask: use work_on_cpu in acpi-cpufreq.c for read_measured_perf_ctrs cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write cpumask: use cpumask_var_t in acpi-cpufreq.c cpumask: use work_on_cpu in acpi/cstate.c cpumask: convert struct cpufreq_policy to cpumask_var_t cpumask: replace CPUMASK_ALLOC etc with cpumask_var_t x86: cleanup remaining cpumask_t ops in smpboot code cpumask: update pci_bus_show_cpuaffinity to use new cpumask API cpumask: update local_cpus_show to use new cpumask API ia64: cpumask fix for is_affinity_mask_valid()
-
Linus Torvalds authored
Commit c4be0c1d added the ability for write_super_lockfs to return errors, and renamed them to match. But btrfs didn't get converted. Do the minimal conversion to make it compile again. Signed-off-by:
-
Artem Bityutskiy authored
The 'rb_first()', 'rb_last()', 'rb_next()' and 'rb_prev()' calls take a pointer to an RB node or RB root. They do not change the pointed objects, so add a 'const' qualifier in order to make life of the users of these functions easier. Indeed, if I have my own constant pointer &const struct my_type *p, and I call 'rb_next(&p->rb)', I get a GCC warning: warning: passing argument 1 of ‘rb_next’ discards qualifiers from pointer target type Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Eric Piel authored
The sensor can be accessed via various buses. In particular, SPI, I²C and, on HP laptops, via a specific ACPI API (the only one currently supported). Separate this latest platform from the core of the sensor driver to allow support for the other bus type. The second, and more direct goal is actually to be able to merge this part with the hp-disk-leds driver, which has the same ACPI PNP number. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
