Merge tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One fix that came in during the merge window, fixing an error in the
  examples in the DT binding documentation for mt6315"

* tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: mt6315-regulator: fix invalid allowed mode

Pull ntfs3 updates from Konstantin Komarov:

 - fix some memory leaks and panic

 - fixed xfstests (tested on x86_64): generic/092 generic/099
   generic/228 generic/240 generic/307 generic/444

 - fix some typos, dead code, etc

* tag 'ntfs3_for_5.19' of https://github.com/Paragon-Software-Group/linux-ntfs3:
  fs/ntfs3: provide block_invalidate_folio to fix memory leak
  fs/ntfs3: Fix invalid free in log_replay
  fs/ntfs3: Update valid size if -EIOCBQUEUED
  fs/ntfs3: Check new size for limits
  fs/ntfs3: Fix fiemap + fix shrink file size (to remove preallocated space)
  fs/ntfs3: In function ntfs_set_acl_ex do not change inode->i_mode if called from function ntfs_init_acl
  fs/ntfs3: Optimize locking in ntfs_save_wsl_perm
  fs/ntfs3: Update i_ctime when xattr is added
  fs/ntfs3: Restore ntfs_xattr_get_acl and ntfs_xattr_set_acl functions
  fs/ntfs3: Keep preallocated only if option prealloc enabled
  fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'

Merge tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ptrace_stop cleanups from Eric Biederman:
 "While looking at the ptrace problems with PREEMPT_RT and the problems
  Peter Zijlstra was encountering with ptrace in his freezer rewrite I
  identified some cleanups to ptrace_stop that make sense on their own
  and move make resolving the other problems much simpler.

  The biggest issue is the habit of the ptrace code to change
  task->__state from the tracer to suppress TASK_WAKEKILL from waking up
  the tracee. No other code in the kernel does that and it is straight
  forward to update signal_wake_up and friends to make that unnecessary.

  Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
  then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
  on the fact that all stopped states except the special stop states can
  tolerate spurious wake up and recover their state.

  The state of stopped and traced tasked is changed to be stored in
  task->jobctl as well as in task->__state. This makes it possible for
  the freezer to recover tasks in these special states, as well as
  serving as a general cleanup. With a little more work in that
  direction I believe TASK_STOPPED can learn to tolerate spurious wake
  ups and become an ordinary stop state.

  The TASK_TRACED state has to remain a special state as the registers
  for a process are only reliably available when the process is stopped
  in the scheduler. Fundamentally ptrace needs acess to the saved
  register values of a task.

  There are bunch of semi-random ptrace related cleanups that were found
  while looking at these issues.

  One cleanup that deserves to be called out is from commit 57b6de08
  ("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
  makes a change that is technically user space visible, in the handling
  of what happens to a tracee when a tracer dies unexpectedly. According
  to our testing and our understanding of userspace nothing cares that
  spurious SIGTRAPs can be generated in that case"

* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
  ptrace: Always take siglock in ptrace_resume
  ptrace: Don't change __state
  ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
  ptrace: Document that wait_task_inactive can't fail
  ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
  signal: Use lockdep_assert_held instead of assert_spin_locked
  ptrace: Remove arch_ptrace_attach
  ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
  ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
  signal: Replace __group_send_sig_info with send_signal_locked
  signal: Rename send_signal send_signal_locked

Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull kthread updates from Eric Biederman:
 "This updates init and user mode helper tasks to be ordinary user mode
  tasks.

  Commit 40966e31 ("kthread: Ensure struct kthread is present for
  all kthreads") caused init and the user mode helper threads that call
  kernel_execve to have struct kthread allocated for them. This struct
  kthread going away during execve in turned made a use after free of
  struct kthread possible.

  Here, commit 343f4c49 ("kthread: Don't allocate kthread_struct for
  init and umh") is enough to fix the use after free and is simple
  enough to be backportable.

  The rest of the changes pass struct kernel_clone_args to clean things
  up and cause the code to make sense.

  In making init and the user mode helpers tasks purely user mode tasks
  I ran into two complications. The function task_tick_numa was
  detecting tasks without an mm by testing for the presence of
  PF_KTHREAD. The initramfs code in populate_initrd_image was using
  flush_delayed_fput to ensuere the closing of all it's file descriptors
  was complete, and flush_delayed_fput does not work in a userspace
  thread.

  I have looked and looked and more complications and in my code review
  I have not found any, and neither has anyone else with the code
  sitting in linux-next"

* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sched: Update task_tick_numa to ignore tasks without an mm
  fork: Stop allowing kthreads to call execve
  fork: Explicitly set PF_KTHREAD
  init: Deal with the init process being a user mode process
  fork: Generalize PF_IO_WORKER handling
  fork: Explicity test for idle tasks in copy_thread
  fork: Pass struct kernel_clone_args into copy_thread
  kthread: Don't allocate kthread_struct for init and umh

Merge tag 'per-namespace-ipc-sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ipc sysctl namespace updates from Eric Biederman:
 "This updates the ipc sysctls so that they are fundamentally per ipc
  namespace. Previously these sysctls depended upon a hack to simulate
  being per ipc namespace by looking up the ipc namespace in read or
  write. With this set of changes the ipc sysctls are registered per ipc
  namespace and open looks up the ipc namespace.

  Not only does this series of changes ensure the traditional binding at
  open time happens, but it sets a foundation for being able to relax
  the permission checks to allow a user namspace root to change the ipc
  sysctls for an ipc namespace that the user namespace root requires. To
  do this requires the ipc namespace to be known at open time"

* tag 'per-namespace-ipc-sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ipc: Remove extra braces
  ipc: Check permissions for checkpoint_restart sysctls at open time
  ipc: Remove extra1 field abuse to pass ipc namespace
  ipc: Use the same namespace to modify and validate
  ipc: Store ipc sysctls in the ipc namespace
  ipc: Store mqueue sysctls in the ipc namespace

Commit 23cfbc6e ("firmware: Add the support for ZSTD-compressed
firmware files") added support for ZSTD compression, but in the process
also made the previously default XZ compression a config option.

That means that anybody who upgrades their kernel and does a

    make oldconfig

to update their configuration, will end up without the XZ compression
that the configuration used to have.

Add the 'default y' to make sure this doesn't happen.

The whole compression question should probably be improved upon, since
it is now possible to "enable" compression in the kernel config but not
enable any actual compression algorithm, which makes it all very
useless.  It makes no sense to ask Kconfig questions that enable
situations that are nonsensical like that.

This at least fixes the immediate problem of a kernel update resulting
in a nonbootable machine because of a missed option.

Fixes: 23cfbc6e ("firmware: Add the support for ZSTD-compressed  firmware files")
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
 "JFFS2:
   - Fixes for a memory leak

  UBI:
   - Fixes for fastmap (UAF, high CPU usage)

  UBIFS:
   - Minor cleanups"

* tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: ubi_create_volume: Fix use-after-free when volume creation failed
  ubi: fastmap: Check wl_pool for free peb before wear leveling
  ubi: fastmap: Fix high cpu usage of ubi_bgt by making sure wl_pool not empty
  ubifs: Use NULL instead of using plain integer as pointer
  ubifs: Simplify the return expression of run_gc()
  jffs2: fix memory leak in jffs2_do_fill_super
  jffs2: Use kzalloc instead of kmalloc/memset

Pull UML updates from Richard Weinberger:

 - Various cleanups and fixes: xterm, serial line, time travel

 - Set ARCH_HAS_GCOV_PROFILE_ALL

* tag 'for-linus-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix out-of-bounds read in LDT setup
  um: chan_user: Fix winch_tramp() return value
  um: virtio_uml: Fix broken device handling in time-travel
  um: line: Use separate IRQs per line
  um: Enable ARCH_HAS_GCOV_PROFILE_ALL
  um: Use asm-generic/dma-mapping.h
  um: daemon: Make default socket configurable
  um: xterm: Make default terminal emulator configurable

Pull devicetree fixes from Rob Herring:

 - Fixes for unevaluatedProperties warnings.

   These were missed to due to a bug in dtschema which is now fixed. The
   changes involve either adding missing properties or removing spurious
   properties from examples.

 - Update several Qualcomm binding maintainer email addresses

 - Fix typo in imx8mp-media-blk-ctrl example

 - Fix fixed string pattern in qcom,smd

 - Correct the order of 'reg' entries in Xilinx PCI binding

* tag 'devicetree-fixes-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: mtd: spi-nand: Add spi-peripheral-props.yaml reference
  dt-bindings: memory-controllers: ingenic: Split out child node properties
  dt-bindings: net/dsa: Add spi-peripheral-props.yaml references
  dt-bindings: PCI: apple: Add missing 'power-domains' property
  dt-bindings: Update Sibi Sankar's email address
  dt-bindings: clock: Update my email address
  dt-bindings: PCI: xilinx-cpm: Fix reg property order
  dt-bindings: net: Fix unevaluatedProperties warnings in examples
  dt-bindings: PCI: socionext,uniphier-pcie: Add missing child interrupt controller
  dt-bindings: usb: snps,dwc3: Add missing 'dma-coherent' property
  dt-bindings: soc: imx8mp-media-blk-ctrl: Fix DT example
  dt-bindings: soc: qcom,smd: do not use pattern for simple rpm-requests string

Pull yet more ARM multiplatform updates from Arnd Bergmann:
 "This is the third and final bit of the multiplatform conversion for
  ARMv5, finishing off OMAP1. One patch enables the common-clk
  interface, and the other ones does the Kconfig change.

  These were waiting on a few dependencies to trickle in for common-clk,
  and the last one of those was in the USB tree"

* tag 'arm-multiplatform-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: omap1: enable multiplatform
  ARM: OMAP1: clock: Convert to CCF

Pull initial Loongarch architecture code from Arnd Bergmann:
 "This is the majority of the loongarch architecture code, including the
  final system call interface and all core functionality.

  It still misses three sets of peripheral but vital patches to add
  support for other subsystems, which have yet to pass review:

   - The drivers/firmware/efi stub for booting from a standard UEFI
     firmware implementation. Both the original custom boot interface
     and a draft implementation of the EFI stub did not make it, so it
     is currently impossible to boot the kernel, until the loongarch
     specific portions get accepted into the UEFI subsystem

   - The drivers/irqchip/irq-loongson-*.c drivers are shared with the
     the MIPS port, but currently lack support for ACPI based booting,
     which will get merged through the irqchip subsystem.

   - Similarly, the drivers/pci/controller/pci-loongson.c needs to be
     modified for ACPI support, which will be merged through the PCI
     subsystem.

  While the port cannot actually be used before all the above are
  merged, having it in 5.19 helps to establish the user space ABI for
  the libc ports to build on, and to help any treewide changes in the
  mainline kernel get applied here as well.

  A gcc-12 based tool chains for build testing is now included in

    https://mirrors.edge.kernel.org/pub/tools/crosstool/"

Original description from Huacai Chen:
 "LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
  LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
  version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
  boot protocol LoongArch-specific interrupt controllers (similar to APIC)
  are already added in the next revision of ACPI Specification (current
  revision is 6.4).

  This patchset is adding basic LoongArch support in mainline kernel, we
  can see a complete snapshot here:

    https://github.com/loongson/linux/tree/loongarch-next
    https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next

  Cross-compile tool chain to build kernel:

    https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz

  A CLFS-based Linux distro:

    https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2

  Open-source tool chain which is under review (Binutils and Gcc are already upstream):

    https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
    https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
    https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2

  Loongson and LoongArch documentations:

    https://github.com/loongson/LoongArch-Documentation

  LoongArch-specific interrupt controllers:

    https://mantis.uefi.org/mantis/view.php?id=2203
    https://mantis.uefi.org/mantis/view.php?id=2313"

Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/

* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
  MAINTAINERS: Add maintainer information for LoongArch
  LoongArch: Add Loongson-3 default config file
  LoongArch: Add Non-Uniform Memory Access (NUMA) support
  LoongArch: Add multi-processor (SMP) support
  LoongArch: Add VDSO and VSYSCALL support
  LoongArch: Add some library functions
  LoongArch: Add misc common routines
  LoongArch: Add ELF and module support
  LoongArch: Add signal handling support
  LoongArch: Add system call support
  LoongArch: Add memory management
  LoongArch: Add process management
  LoongArch: Add exception/interrupt handling
  LoongArch: Add boot and setup routines
  LoongArch: Add other common headers
  LoongArch: Add atomic/locking headers
  LoongArch: Add CPU definition headers
  LoongArch: Add build infrastructure
  LoongArch: Add writecombine support for drm
  LoongArch: Add ELF-related definitions
  ...

Pull arm64 fixes from Catalin Marinas:
 "Most of issues addressed were introduced during this merging window.

   - Initialise jump labels before setup_machine_fdt(), needed by commit
     f5bda35f ("random: use static branch for crng_ready()").

   - Sparse warnings: missing prototype, incorrect __user annotation.

   - Skip SVE kselftest if not sufficient vector lengths supported"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
  arm64: Initialize jump labels before setup_machine_fdt()
  arm64: hibernate: Fix syntax errors in comments
  arm64: Remove the __user annotation for the restore_za_context() argument
  ftrace/fgraph: fix increased missing-prototypes warnings

Pull more RISC-V updates from Palmer Dabbelt:
 "This is mostly some DT updates, but also a handful of cleanups and
  some fixes. The most user-visible of those are:

   - A device tree for the Sundance Polarberry, along with a handful of
     fixes and clenups to the PolarFire SOC device trees and bindings.

   - The memfd_secret syscall number is now visible to userspace,

   - Some improvements to the vm layout dump, which really should have
     followed shortly after the sv48 patches but I missed"

* tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move alternative length validation into subsection
  riscv: mm: init: make pt_ops_set_[early|late|fixmap] static
  riscv: move errata/ and kvm/ builds to arch/riscv/Kbuild
  RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY
  riscv: Wire up memfd_secret in UAPI header
  riscv: Fix irq_work when SMP is disabled
  riscv: Improve virtual kernel memory layout dump
  riscv: Initialize thread pointer before calling C functions
  Documentation: riscv: Add sv48 description to VM layout
  RISC-V: Only default to spinwait on SBI-0.1 and M-mode
  riscv: dts: icicle: sort nodes alphabetically
  riscv: microchip: icicle: readability fixes
  riscv: dts: microchip: add the sundance polarberry
  dt-bindings: riscv: microchip: add polarberry compatible string
  dt-bindings: vendor-prefixes: add Sundance DSP
  riscv: dts: microchip: make the fabric dtsi board specific
  dt-bindings: riscv: microchip: document icicle reference design
  riscv: dts: microchip: remove soc vendor from filenames
  riscv: dts: microchip: move sysctrlr out of soc bus
  riscv: dts: microchip: remove icicle memory clocks

Pull more s390 updates from Heiko Carstens:
 "Just a couple of small improvements, bug fixes and cleanups:

   - Add Eric Farman as maintainer for s390 virtio drivers.

   - Improve machine check handling, and avoid incorrectly injecting a
     machine check into a kvm guest.

   - Add cond_resched() call to gmap page table walker in order to avoid
     possible huge latencies. Also use non-quiesing sske instruction to
     speed up storage key handling.

   - Add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP so s390 behaves
     similar like common code.

   - Get sie control block address from correct stack slot in perf event
     code. This fixes potential random memory accesses.

   - Change uaccess code so that the exception handler sets the result
     of get_user() and __get_kernel_nofault() to zero in case of a
     fault. Until now this was done via input parameters for inline
     assemblies. Doing it via fault handling is what most or even all
     other architectures are doing.

   - Couple of other small cleanups and fixes"

* tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/stack: add union to reflect kvm stack slot usages
  s390/stack: merge empty stack frame slots
  s390/uaccess: whitespace cleanup
  s390/uaccess: use __noreturn instead of __attribute__((noreturn))
  s390/uaccess: use exception handler to zero result on get_user() failure
  s390/uaccess: use symbolic names for inline assembler operands
  s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag
  s390/mm: use non-quiescing sske for KVM switch to keyed guest
  s390/gmap: voluntarily schedule during key setting
  MAINTAINERS: Update s390 virtio-ccw
  s390/kexec: add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP
  s390/Kconfig.debug: fix indentation
  s390/Kconfig: fix indentation
  s390/perf: obtain sie_block from the right address
  s390: generate register offsets into pt_regs automatically
  s390: simplify early program check handler
  s390/crypto: fix scatterwalk_unmap() callers in AES-GCM

Pull more EFI updates from Ard Biesheuvel:
 "Follow-up tweaks for EFI changes - they mostly address issues
  introduced this merge window, except for Heinrich's patch:

   - fix new DXE service invocations for mixed mode

   - use correct Kconfig symbol when setting PE header flag

   - clean up the drivers/firmware/efi Kconfig dependencies so that
     features that depend on CONFIG_EFI are hidden from the UI when the
     symbol is not enabled.

  Also included is a RISC-V bugfix from Heinrich to avoid read-write
  mappings of read-only firmware regions in the EFI page tables"

* tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: clean up Kconfig dependencies on CONFIG_EFI
  efi/x86: libstub: Make DXE calls mixed mode safe
  efi: x86: Fix config name for setting the NX-compatibility flag in the PE header
  riscv: read-only pages should not be writable

Since we had to effectively reverted
commit 35a67236 ("driver core: Ensure wait_for_device_probe() waits
until the deferred_probe_timeout fires") in an earlier patch, a non-zero
deferred_probe_timeout will break NFS rootfs mounting [1] again. So, set
the default back to zero until we can fix that.

[1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/

Fixes: 2b28a1a8 ("driver core: Extend deferred probe timeout on driver registration")
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220526034609.480766-3-saravanak@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mounting NFS rootfs was timing out when deferred_probe_timeout was
non-zero [1].  This was because ip_auto_config() initcall times out
waiting for the network interfaces to show up when
deferred_probe_timeout was non-zero. While ip_auto_config() calls
wait_for_device_probe() to make sure any currently running deferred
probe work or asynchronous probe finishes, that wasn't sufficient to
account for devices being deferred until deferred_probe_timeout.

Commit 35a67236 ("driver core: Ensure wait_for_device_probe() waits
until the deferred_probe_timeout fires") tried to fix that by making
sure wait_for_device_probe() waits for deferred_probe_timeout to expire
before returning.

However, if wait_for_device_probe() is called from the kernel_init()
context:

- Before deferred_probe_initcall() [2], it causes the boot process to
  hang due to a deadlock.

- After deferred_probe_initcall() [3], it blocks kernel_init() from
  continuing till deferred_probe_timeout expires and beats the point of
  deferred_probe_timeout that's trying to wait for userspace to load
  modules.

Neither of this is good. So revert the changes to
wait_for_device_probe().

[1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/
[2] - https://lore.kernel.org/lkml/YowHNo4sBjr9ijZr@dev-arch.thelio-3990X/
[3] - https://lore.kernel.org/lkml/Yo3WvGnNk3LvLb7R@linutronix.de/

Fixes: 35a67236 ("driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires")
Cc: John Stultz <jstultz@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Basil Eljuse <Basil.Eljuse@arm.com>
Cc: Ferry Toth <fntoth@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: linux-pm@vger.kernel.org
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220526034609.480766-2-saravanak@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With all the header files out of the way, and the clock driver
converted to the common framework, nothing stops us from building
OMAP together with the other platforms.

As usual, the decompressor support is a victim here, and is
only available when CONFIG_DEBUG_LL is configured for the
particular board.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

OMAP1 still uses its own implementation of standard clock API defined in
include/linux/clk.h.  Internals of that implementation are not visible
outside OMAP1 directory.  As a consequence, device drivers are not able to
register clocks potentially provided by peripheral devices.

Drop OMAP1 implementation of the clock API and enable common clock
framework.  Modify the remaining low level code to be compatible with
clock provider API and register the clocks with CCF.

Move initialisation of clocks to omap1_timer_init() to avoid memory
allocation issues at early setup phase from where omap1_init_early() is
called.  Register the clocks after initialization of clock I/O registers,
local clock pointers used by OMAP1 clock ops, and local .rate fields of
clocks with no local implementation of .recalc ops, so CCF structures are
populated with correct data during clock registration.  Instead of
enabling some of the registered clocks, flag them for CCF as critical.
Introduce .is_enabled op using code that verifies hardware status of clock
enablement, split out from implementation of .disable_unused op, so the
latter is actually called by CCF for not requested but hardware enabled
clocks.  Add .round_rate ops where missing so .set_rate ops are called by
CCF as expected.  Since CCF allows parallel execution of .enable/.disable
and .set_rate ops, protect registers shared among those groups of ops from
concurrent access with spinlocks.  Drop local debugfs support in favor of
that provided by CCF.

v2: flag tc2_ck as CLK_IS_CRITICAL (Aaro)
v3: rebase on top of soc/omap1-multiplatform-5.18,
  - drop no longer needed includes from arch/arm/mach-omap1/io.c
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.19-rc1.

  Lots of tiny driver core changes and cleanups happened this cycle, but
  the two major things are:

   - firmware_loader reorganization and additions including the ability
     to have XZ compressed firmware images and the ability for userspace
     to initiate the firmware load when it needs to, instead of being
     always initiated by the kernel. FPGA devices specifically want this
     ability to have their firmware changed over the lifetime of the
     system boot, and this allows them to work without having to come up
     with yet-another-custom-uapi interface for loading firmware for
     them.

   - physical location support added to sysfs so that devices that know
     this information, can tell userspace where they are located in a
     common way. Some ACPI devices already support this today, and more
     bus types should support this in the future.

  Smaller changes include:

   - driver_override api cleanups and fixes

   - error path cleanups and fixes

   - get_abi script fixes

   - deferred probe timeout changes.

  It's that last change that I'm the most worried about. It has been
  reported to cause boot problems for a number of systems, and I have a
  tested patch series that resolves this issue. But I didn't get it
  merged into my tree before 5.18-final came out, so it has not gotten
  any linux-next testing.

  I'll send the fixup patches (there are 2) as a follow-on series to this
  pull request.

  All have been tested in linux-next for weeks, with no reported issues
  other than the above-mentioned boot time-outs"

* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  driver core: fix deadlock in __device_attach
  kernfs: Separate kernfs_pr_cont_buf and rename_lock.
  topology: Remove unused cpu_cluster_mask()
  driver core: Extend deferred probe timeout on driver registration
  MAINTAINERS: add Russ Weight as a firmware loader maintainer
  driver: base: fix UAF when driver_attach failed
  test_firmware: fix end of loop test in upload_read_show()
  driver core: location: Add "back" as a possible output for panel
  driver core: location: Free struct acpi_pld_info *pld
  driver core: Add "*" wildcard support to driver_async_probe cmdline param
  driver core: location: Check for allocations failure
  arch_topology: Trace the update thermal pressure
  kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
  export: fix string handling of namespace in EXPORT_SYMBOL_NS
  rpmsg: use local 'dev' variable
  rpmsg: Fix calling device_lock() on non-initialized device
  firmware_loader: describe 'module' parameter of firmware_upload_register()
  firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
  firmware_loader: Fix configs for sysfs split
  selftests: firmware: Add firmware upload selftests
  ...

Pull char / misc / other smaller driver subsystem updates from Greg KH:
 "Here is the large set of char, misc, and other driver subsystem
  updates for 5.19-rc1. The merge request for this has been delayed as I
  wanted to get lots of linux-next testing due to some late arrivals of
  changes for the habannalabs driver.

  Highlights of this merge are:

   - habanalabs driver updates for new hardware types and fixes and
     other updates

   - IIO driver tree merge which includes loads of new IIO drivers and
     cleanups and additions

   - PHY driver tree merge with new drivers and small updates to
     existing ones

   - interconnect driver tree merge with fixes and updates

   - soundwire driver tree merge with some small fixes

   - coresight driver tree merge with small fixes and updates

   - mhi bus driver tree merge with lots of updates and new device
     support

   - firmware driver updates

   - fpga driver updates

   - lkdtm driver updates (with a merge conflict, more on that below)

   - extcon driver tree merge with small updates

   - lots of other tiny driver updates and fixes and cleanups, full
     details in the shortlog.

  All of these have been in linux-next for almost 2 weeks with no
  reported problems"

* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
  habanalabs: use separate structure info for each error collect data
  habanalabs: fix missing handle shift during mmap
  habanalabs: remove hdev from hl_ctx_get args
  habanalabs: do MMU prefetch as deferred work
  habanalabs: order memory manager messages
  habanalabs: return -EFAULT on copy_to_user error
  habanalabs: use NULL for eventfd
  habanalabs: update firmware header
  habanalabs: add support for notification via eventfd
  habanalabs: add topic to memory manager buffer
  habanalabs: handle race in driver fini
  habanalabs: add device memory scrub ability through debugfs
  habanalabs: use unified memory manager for CB flow
  habanalabs: unified memory manager new code for CB flow
  habanalabs/gaudi: set arbitration timeout to a high value
  habanalabs: add put by handle method to memory manager
  habanalabs: hide memory manager page shift
  habanalabs: Add separate poll interval value for protocol
  habanalabs: use get_task_pid() to take PID
  habanalabs: add prefetch flag to the MAP operation
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt driver changes for
  5.18-rc1. For the most part it's been a quiet development cycle for
  the USB core, but there are the usual "hot spots" of development
  activity.

  Included in here are:

   - Thunderbolt driver updates:
       - fixes for devices without displayport adapters
       - lane bonding support and improvements
       - other minor changes based on device testing

   - dwc3 gadget driver changes.

     It seems this driver will never be finished given that the IP core
     is showing up in zillions of new devices and each implementation
     decides to do something different with it...

   - uvc gadget driver updates as more devices start to use and rely on
     this hardware as well

   - usb_maxpacket() api changes to remove an unneeded and unused
     parameter.

   - usb-serial driver device id updates and small cleanups

   - typec cleanups and fixes based on device testing

   - device tree updates for usb properties

   - lots of other small fixes and driver updates.

  All of these have been in linux-next for weeks with no reported
  problems"

* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  USB: new quirk for Dell Gen 2 devices
  usb: dwc3: core: Add error log when core soft reset failed
  usb: dwc3: gadget: Move null pinter check to proper place
  usb: hub: Simplify error and success path in port_over_current_notify
  usb: cdns3: allocate TX FIFO size according to composite EP number
  usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
  usb: Probe EHCI, OHCI controllers asynchronously
  usb: isp1760: Fix out-of-bounds array access
  xhci: Don't defer primary roothub registration if there is only one roothub
  USB: serial: option: add Quectel BG95 modem
  USB: serial: pl2303: fix type detection for odd device
  xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
  xhci: Remove quirk for over 10 year old evaluation hardware
  xhci: prevent U2 link power state if Intel tier policy prevented U1
  xhci: use generic command timer for stop endpoint commands.
  usb: host: xhci-plat: omit shared hcd if either root hub has no ports
  usb: host: xhci-plat: prepare operation w/o shared hcd
  usb: host: xhci-plat: create shared hcd after having added main hcd
  xhci: prepare for operation w/o shared hcd
  xhci: factor out parts of xhci_gen_setup()
  ...

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 5.19-rc1.

  Lots of forward progress happened this development cycle, one driver
  (wfx wireless driver) got merged into the real portion of the kernel,
  and another one (unisys) was removed as no one is around anymore to
  take care of it and no one has the hardware. Combined with loads of
  tiny driver cleanups overall we removed 13k lines of code from the
  tree, a nice improvement.

  Other than the wfx and unisys driver changes the major points of this
  merge is:

   - r8188eu driver cleanups. So many cleanups. It's amazing just how
     many things have been cleaned up here, and yet, how many remain to
     go. Lots of work happened here, and it doesn't look to slow down
     any time soon.

   - other wifi driver cleanups. Not as many as the r8188eu driver, but
     still pretty impressive from a janitorial point of view.

   - bcm2853 driver cleanups

   - other very minor driver cleanups

  All of these have been in the linux-next tree for weeks with no
  reported issues"

* tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (363 commits)
  staging: r8188eu: remove include/rtw_debug.h
  staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan()
  staging: r8188eu: delete rtw_wx_read/write32()
  staging: r8188eu: Remove multiple assignments
  staging: r8188eu: add check for kzalloc
  staging: r8188eu: fix warnings in rtw_wlan_util
  staging: r8188eu: fix warnings in rtw_pwrctrl
  staging: r8188eu: fix warnings in rtw_p2p
  staging: rtl8712: fix uninit-value in r871xu_drv_init()
  staging: rtl8712: fix uninit-value in usb_read8() and friends
  staging: rtl8712: add error handler in r8712_usbctrl_vendorreq()
  staging: r8188eu: remove _drv_ defines from include/rtw_debug.h
  staging: vc04_services: remove unused macro
  staging: rtl8192u: remove null check after call container_of()
  staging: rtl8192e: remove null check after call container_of()
  staging: ks7010: remove null check after call container_of()
  staging: r8188eu: remove HW_VAR_AC_PARAM_BE from SetHwReg8188EU()
  staging: r8188eu: assoc_rsp and assoc_rsp_len are not used
  staging: r8188eu: last_rx_mgnt_pkts is set but not used
  staging: r8188eu: simplify error handling in recv_func_prehandle
  ...

Pull SPDX updates from Greg KH:
 "Here are some SPDX license marker changes.

  The SPDX-labeling effort has started to pick up again, so here are
  some changes for various parts of the tree that are related to this
  effort.

  Included in here are:

   - freevxfs license updates

   - spihash.c license cleanups

   - spdxcheck script updates to make things easier to work with going
     forward

  All of the license updates came from the original authors/copyright
  holders of the code involved.

  All of these have been in linux-next for weeks with no reported
  issues"

* tag 'spdx-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  siphash: add SPDX tags as sole licensing authority
  scripts/spdxcheck: Exclude top-level README
  scripts/spdxcheck: Exclude MAINTAINERS/CREDITS
  scripts/spdxcheck: Exclude config directories
  scripts/spdxcheck: Put excluded files and directories into a separate file
  scripts/spdxcheck: Add option to display files without SPDX
  scripts/spdxcheck: Add [sub]directory statistics
  scripts/spdxcheck: Add directory statistics
  scripts/spdxcheck: Add percentage to statistics
  freevxfs: relicense to GPLv2 only

Pull more block driver updates from Jens Axboe:
 "A collection of stragglers that were late on sending in their changes
  and just followup fixes.

   - NVMe fixes pull request via Christoph:
       - set controller enable bit in a separate write (Niklas Cassel)
       - disable namespace identifiers for the MAXIO MAP1001 (Christoph)
       - fix a comment typo (Julia Lawall)"

   - MD fixes pull request via Song:
       - Remove uses of bdevname (Christoph Hellwig)
       - Bug fixes (Guoqing Jiang, and Xiao Ni)

   - bcache fixes series (Coly)

   - null_blk zoned write fix (Damien)

   - nbd fixes (Yu, Zhang)

   - Fix for loop partition scanning (Christoph)"

* tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits)
  block: null_blk: Fix null_zone_write()
  nvmet: fix typo in comment
  nvme: set controller enable bit in a separate write
  nvme-pci: disable namespace identifiers for the MAXIO MAP1001
  bcache: avoid unnecessary soft lockup in kworker update_writeback_rate()
  nbd: use pr_err to output error message
  nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
  nbd: fix io hung while disconnecting device
  nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed
  nbd: fix race between nbd_alloc_config() and module removal
  nbd: call genl_unregister_family() first in nbd_cleanup()
  md: bcache: check the return value of kzalloc() in detached_dev_do_request()
  bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init()
  block, loop: support partitions without scanning
  bcache: avoid journal no-space deadlock by reserving 1 journal bucket
  bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
  bcache: improve multithreaded bch_sectors_dirty_init()
  bcache: improve multithreaded bch_btree_check()
  md: fix double free of io_acct_set bioset
  md: Don't set mddev private to NULL in raid0 pers->free
  ...

Pull block request execute cleanups from Jens Axboe:
 "This change was advertised in the initial core block pull request, but
  didn't actually make that branch as we deferred it to a post-merge
  pull request to avoid a bunch of cross branch issues.

  This series cleans up the block execute path quite nicely"

* tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block:
  blk-mq: remove the done argument to blk_execute_rq_nowait
  blk-mq: avoid a mess of casts for blk_end_sync_rq
  blk-mq: remove __blk_execute_rq_nowait

Pull block fixes from Jens Axboe:
 "Just a collection of fixes that have been queued up since the initial
  merge window pull request, the majority of which are targeted for
  stable as well.

  One bio_set fix that fixes an issue with the dm adoption of cached bio
  structs that got introduced in this merge window"

* tag 'for-5.19/block-2022-06-02' of git://git.kernel.dk/linux-block:
  block: Fix potential deadlock in blk_ia_range_sysfs_show()
  block: fix bio_clone_blkg_association() to associate with proper blkcg_gq
  block: remove useless BUG_ON() in blk_mq_put_tag()
  blk-mq: do not update io_ticks with passthrough requests
  block: make bioset_exit() fully resilient against being called twice
  block: use bio_queue_enter instead of blk_queue_enter in bio_poll
  block: document BLK_STS_AGAIN usage
  block: take destination bvec offsets into account in bio_copy_data_iter
  blk-iolatency: Fix inflight count imbalances and IO hangs on offline
  blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx

Pull more io_uring updates from Jens Axboe:

 - A small series with some prep patches for the upcoming 5.20 split of
   the io_uring.c file. No functional changes here, just minor bits that
   are nice to get out of the way now (me)

 - Fix for a memory leak in high numbered provided buffer groups,
   introduced in the merge window (me)

 - Wire up the new socket opcode for allocated direct descriptors,
   making it consistent with the other opcodes that can instantiate a
   descriptor (me)

 - Fix for the inflight tracking, should go into 5.18-stable as well
   (me)

 - Fix for a deadlock for io-wq offloaded file slot allocations (Pavel)

 - Direct descriptor failure fput leak fix (Xiaoguang)

 - Fix for the direct descriptor allocation hinting in case of
   unsuccessful install (Xiaoguang)

* tag 'io_uring-5.19-2022-06-02' of git://git.kernel.dk/linux-block:
  io_uring: reinstate the inflight tracking
  io_uring: fix deadlock on iowq file slot alloc
  io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots
  io_uring: defer alloc_hint update to io_file_bitmap_set()
  io_uring: ensure fput() called correspondingly when direct install fails
  io_uring: wire up allocated direct descriptors for socket
  io_uring: fix a memory leak of buffer group list on exit
  io_uring: move shutdown under the general net section
  io_uring: unify calling convention for async prep handling
  io_uring: add io_op_defs 'def' pointer in req init and issue
  io_uring: make prep and issue side of req handlers named consistently
  io_uring: make timeout prep handlers consistent with other prep handlers

Pull virtio updates from Michael Tsirkin:
 "vhost,virtio and vdpa features, fixes, and cleanups:

   - mac vlan filter and stats support in mlx5 vdpa

   - irq hardening in virtio

   - performance improvements in virtio crypto

   - polling i/o support in virtio blk

   - ASID support in vhost

   - fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
  vdpa: ifcvf: set pci driver data in probe
  vdpa/mlx5: Add RX MAC VLAN filter support
  vdpa/mlx5: Remove flow counter from steering
  vhost: rename vhost_work_dev_flush
  vhost-test: drop flush after vhost_dev_cleanup
  vhost-scsi: drop flush after vhost_dev_cleanup
  vhost_vsock: simplify vhost_vsock_flush()
  vhost_test: remove vhost_test_flush_vq()
  vhost_net: get rid of vhost_net_flush_vq() and extra flush calls
  vhost: flush dev once during vhost_dev_stop
  vhost: get rid of vhost_poll_flush() wrapper
  vhost-vdpa: return -EFAULT on copy_to_user() failure
  vdpasim: Off by one in vdpasim_set_group_asid()
  virtio: Directly use ida_alloc()/free()
  virtio: use WARN_ON() to warning illegal status value
  virtio: harden vring IRQ
  virtio: allow to unbreak virtqueue
  virtio-ccw: implement synchronize_cbs()
  virtio-mmio: implement synchronize_cbs()
  virtio-pci: implement synchronize_cbs()
  ...

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes for 5.19 merge window. Nothing particular
  stands out, as most changes are device-specific fixes and quirks"

* tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  selftests: alsa: Handle pkg-config failure more gracefully
  ALSA: usb-audio: Optimize TEAC clock quirk
  ASoC: da7219: cancel AAD related work earlier for jack removal
  ASoC: da7219: Fix pole orientation detection on certain headsets
  ASoC: Intel: avs: Fix build error on arc, m68k and sparc
  ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
  ALSA: hda/via: Delete does not require return
  ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptop
  ASoC: Intel: common: fix typo for tplg naming
  ALSA: usb-audio: Cancel pending work at closing a MIDI substream
  ALSA: usb-audio: Add mixer mapping for Gigabyte B450/550 Mobos
  ASoC: rt5640: Do not manipulate pin "Platform Clock" if the "Platform Clock" is not in the DAPM
  ASoC: SOF: amd: Fixed Build error
  ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
  ASoC: soc-pcm: fix BE transition for TRIGGER_START

SPI peripheral device bindings need to reference spi-peripheral-props.yaml
in order to use various SPI controller specific properties. Otherwise,
the unevaluatedProperties check will reject any controller specific
properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220525205909.2486153-1-robh@kernel.org

Pull more drm updates from Dave Airlie:
 "This is mostly regular fixes, msm and amdgpu. There is a tegra patch
  that is bit of prep work for a 5.20 feature to avoid some inter-tree
  syncs, and a couple of late addition amdgpu uAPI changes but best to
  get those in early, and the userspace pieces are ready.

  msm:
   - Limiting WB modes to max sspp linewidth
   - Fixing the supported rotations to add 180 back for IGT
   - Fix to handle pm_runtime_get_sync() errors to avoid unclocked
     access in the bind() path for dpu driver
   - Fix the irq_free() without request issue which was a big-time
     hitter in the CI-runs.

  amdgpu:
   - Update fdinfo to the common drm format
   - uapi:
       - Add VM_NOALLOC GPUVM attribute to prevent buffers for going
         into the MALL
       - Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that
         can be discarded on eviction
       - Mesa code which uses these:
           https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466
   - Link training fixes
   - DPIA fixes
   - Misc code cleanups
   - Aux fixes
   - Hotplug fixes
   - More FP clean up
   - Misc GFX9/10 fixes
   - Fix a possible memory leak in SMU shutdown
   - SMU 13 updates
   - RAS fixes
   - TMZ fixes
   - GC 11 updates
   - SMU 11 metrics fixes
   - Fix coverage blend mode for overlay plane
   - Note DDR vs LPDDR memory
   - Fuzz fix for CS IOCTL
   - Add new PCI DID

  amdkfd:
   - Clean up hive setup
   - Misc fixes

  tegra:
   - add some prelim 5.20 work to avoid inter-tree mess"

* tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm: (57 commits)
  drm/msm/dpu: Move min BW request and full BW disable back to mdss
  drm/msm/dpu: Fix pointer dereferenced before checking
  drm/msm/dpu: Remove unused code
  drm/msm/disp/dpu1: remove superfluous init
  drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()
  gpu: host1x: Add context bus
  drm/amdgpu: add drm-client-id to fdinfo v2
  drm/amdgpu: Convert to common fdinfo format v5
  drm/amdgpu: bump minor version number
  drm/amdgpu: add AMDGPU_VM_NOALLOC v2
  drm/amdgpu: add AMDGPU_GEM_CREATE_DISCARDABLE
  drm/amdgpu: add beige goby PCI ID
  drm/amd/pm: Return auto perf level, if unsupported
  drm/amdkfd: fix typo in comment
  drm/amdgpu/gfx: fix typos in comments
  drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
  drm/amdgpu: differentiate between LP and non-LP DDR memory
  drm/amdgpu: Resolve pcie_bif RAS recovery bug
  drm/amdgpu: clean up asd on the ta_firmware_header_v2_0
  drm/amdgpu/discovery: validate VCN and SDMA instances
  ...

Binding schemas which define child node properties such as memory
controllers with timing properties need a separate schema which can be
referenced from child device schemas. This is necessary for
unevaluatedProperties checks to work properly.

Move the ingenic,nemc child properties to its own file and reference
from ingenic,nand.yaml which describes a child NAND controller.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220525210140.2489866-1-robh@kernel.org

SPI peripheral device bindings need to reference spi-peripheral-props.yaml
in order to use various SPI controller specific properties. Otherwise,
the unevaluatedProperties check will reject any controller specific
properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220531220122.2412711-1-robh@kernel.org

Add the maintainer information for the LoongArch (LA or LArch for short)
architecture.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add a default config file for LoongArch-based Loongson-3 platform.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add Non-Uniform Memory Access (NUMA) support for LoongArch. LoongArch
has 48-bit physical address, but the HyperTransport I/O bus only support
40-bit address, so we need a custom phys_to_dma() and dma_to_phys() to
extract the 4-bit node id (bit 44~47) from Loongson-3's 48-bit physical
address space and embed it into 40-bit. In the 40-bit dma address, node
id offset can be read from the LS7A_DMA_CFG register.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch-based procesors have 4, 8 or 16 cores per package. This patch
adds multi-processor (SMP) support for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add VDSO and VSYSCALL support (sigreturn, gettimeofday and its friends)
for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>