I was confused when the graphics came out with blue
penguins on the DPI panel.

It turns out that the so-called "packed RGB666" mode
on the DSI formatter is incorrect: this mode is the
actual RGB888 mode, and the mode called RGB888 is
BGR888.

The claims that the MCDE had inverse RGB/BGR buffer
formats was wrong, so correct this and the buggy
register and everything is much more consistent, and
graphics look good on all targets, both DPI and
DSI.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: phone-devel@vger.kernel.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175413.869871-1-linus.walleij@linaro.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a fallthrough pseudo-keyword.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/0eedb3972a0032da4997a2a47cf0665fbe9c56ca.1605896060.git.gustavoars@kernel.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/9c1dcb12aae7c7ff0907ffb99ffd227656cbe444.1605896060.git.gustavoars@kernel.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/c21a588bf9e222826f6b138db91de26a2b21df33.1605896060.git.gustavoars@kernel.org

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/111e9d3d55c686892357aa5269022024b4d48330.1605896059.git.gustavoars@kernel.org

While the system heap can return non-contiguous pages,
try to allocate larger order pages if possible.

This will allow slight performance gains and make implementing
page pooling easier.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-6-john.stultz@linaro.org

This patch is basically a port of Ørjan Eide's similar patch for ION
 https://lore.kernel.org/lkml/20200414134629.54567-1-orjan.eide@arm.com/

Only sync the sg-list of dma-buf heap attachment when the attachment
is actually mapped on the device.

dma-bufs may be synced at any time. It can be reached from user space
via DMA_BUF_IOCTL_SYNC, so there are no guarantees from callers on when
syncs may be attempted, and dma_buf_end_cpu_access() and
dma_buf_begin_cpu_access() may not be paired.

Since the sg_list's dma_address isn't set up until the buffer is used
on the device, and dma_map_sg() is called on it, the dma_address will be
NULL if sync is attempted on the dma-buf before it's mapped on a device.

Before v5.0 (commit 55897af6 ("dma-direct: merge swiotlb_dma_ops
into the dma_direct code")) this was a problem as the dma-api (at least
the swiotlb_dma_ops on arm64) would use the potentially invalid
dma_address. How that failed depended on how the device handled physical
address 0. If 0 was a valid address to physical ram, that page would get
flushed a lot, while the actual pages in the buffer would not get synced
correctly. While if 0 is an invalid physical address it may cause a
fault and trigger a crash.

In v5.0 this was incidentally fixed by commit 55897af6 ("dma-direct:
merge swiotlb_dma_ops into the dma_direct code"), as this moved the
dma-api to use the page pointer in the sg_list, and (for Ion buffers at
least) this will always be valid if the sg_list exists at all.

But, this issue is re-introduced in v5.3 with
commit 449fa54d ("dma-direct: correct the physical addr in
dma_direct_sync_sg_for_cpu/device") moves the dma-api back to the old
behaviour and picks the dma_address that may be invalid.

dma-buf core doesn't ensure that the buffer is mapped on the device, and
thus have a valid sg_list, before calling the exporter's
begin_cpu_access.

Logic and commit message originally by: Ørjan Eide <orjan.eide@arm.com>

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-5-john.stultz@linaro.org

The heap-helpers code was not as generic as initially hoped
and it is now not being used, so remove it from the tree.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-4-john.stultz@linaro.org

Since the heap-helpers logic ended up not being as generic as
hoped, move the heap-helpers dma_buf_ops implementations into
the cma_heap directly.

This will allow us to remove the heap_helpers code in a following
patch.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-3-john.stultz@linaro.org

In preparation for some patches to optmize the system
heap code, rework the dmabuf exporter to utilize sgtables rather
then pageslists for tracking the associated pages.

This will allow for large order page allocations, as well as
more efficient page pooling.

In doing so, the system heap stops using the heap-helpers logic
which sadly is not quite as generic as I was hoping it to be, so
this patch adds heap specific implementations of the dma_buf_ops
function handlers.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201121235002.69945-2-john.stultz@linaro.org

Instead of moving meson_dw_hdmi_init() around which breaks existing
platform, let's enable the clock meson_dw_hdmi_init() depends on.
This means we don't have to worry about this clock being enabled or
not, depending on the boot-loader features.

Fixes: b33340e3 ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: changed reported by to kernelci.org bot]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-3-maz@kernel.org

The HDMI driver request clocks early, but never disable them, leaving
the clocks on even when the driver is removed.

Fix it by slightly refactoring the clock code, and register a devm
action that will eventually disable/unprepare the enabled clocks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120094205.525228-2-maz@kernel.org

The init sequence consist of a number of unknown settings
for the display controller. This patch achieves two things:

- Fix an error that must have happened when the driver was
  converted from the backlight subsystem: the 0xb8
  configuration command was lost and added as a tail to
  the previous command.

- Update some minor settings in some bytes here and there
  according to changes in the Samsung GT-I9070 and
  Samsung GT-S7710 code dumps. Since two other devices use
  these settings they probably reflect trimmings later
  found to be better for the display rather than
  customizations for these devices.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-3-linus.walleij@linaro.org

A later version of the s6e63m0 driver in the Samsung
GT-I9070 vendor tree provides 28 different backlight
levels making use of elaborate control of the ACL
and ELVSS regulator. Implement this more fine-grained
backlight control.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-2-linus.walleij@linaro.org

Fix up the format of the manufacturer command set table
to be TAB-indented and lowercase. Add the MCS_TEMP_SWIRE
command that we will make use of.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117175621.870085-1-linus.walleij@linaro.org

The current atomic helpers have either their object state being passed as
an argument or the full atomic state.

The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.

Now that the CRTCs have been converted, let's move forward with the
connectors to provide a consistent interface.

The conversion was done using the coccinelle script below, and built tested
on all the drivers.

@@
identifier connector, connector_state;
@@

 struct drm_connector_helper_funcs {
	...
	struct drm_encoder* (*atomic_best_encoder)(struct drm_connector *connector,
-						   struct drm_connector_state *connector_state);
+						   struct drm_atomic_state *state);
	...
}

@@
identifier connector, connector_state;
@@

 struct drm_connector_helper_funcs {
	...
	void (*atomic_commit)(struct drm_connector *connector,
-			      struct drm_connector_state *connector_state);
+			      struct drm_atomic_state *state);
	...
}

@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier f;
@@

 f(..., struct drm_atomic_state *state, ...)
 {
	<+...
-	FUNCS->atomic_commit(connector, connector_state);
+	FUNCS->atomic_commit(connector, state);
	...+>
 }

@@
struct drm_connector_helper_funcs *FUNCS;
identifier state;
identifier connector, connector_state;
identifier var, f;
@@

 f(struct drm_atomic_state *state, ...)
 {
	<+...
-	var = FUNCS->atomic_best_encoder(connector, connector_state);
+	var = FUNCS->atomic_best_encoder(connector, state);
	...+>
 }

@ connector_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_connector_helper_funcs helpers = {
	...,
	.atomic_best_encoder = func,
	...,
};
|
static struct drm_connector_helper_funcs helpers = {
	...,
	.atomic_commit = func,
	...,
};
)

@@
identifier connector_atomic_func.func;
identifier connector;
symbol state;
@@

 func(struct drm_connector *connector,
-      struct drm_connector_state *state
+      struct drm_connector_state *connector_state
      )
 {
	...
-	state
+	connector_state
 	...
 }

@ ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@

 func(struct drm_connector *connector,
      struct drm_connector_state *connector_state)
{
	... when != connector_state
}

@ adds_state depends on connector_atomic_func && !ignores_state @
identifier connector_atomic_func.func;
identifier connector, connector_state;
@@

 func(struct drm_connector *connector, struct drm_connector_state *connector_state)
 {
+	struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, connector);
	...
 }

@ depends on connector_atomic_func @
identifier connector_atomic_func.func;
identifier connector_state;
identifier connector;
@@

 func(struct drm_connector *connector,
-     struct drm_connector_state *connector_state
+     struct drm_atomic_state *state
	   )
 { ... }

@ include depends on adds_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && adds_state @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118094758.506730-1-maxime@cerno.tech

This allows `struct drm_mode_modeinfo` references to be linkified.

Some descriptions are borrowed from struct drm_display_mode.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/BBtyuxgs3DvcrMtbRyb7KBEWUviGy1dtWO61eB4@cp3-web-016.plabs.ch

Document how to perform a GETCONNECTOR ioctl. Document the various
struct fields. Also document how to perform a forced probe, and when
should user-space do it.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4NxrTtynzPiPX4SOCzxmA1sRB8fVLfeiabVpi5j3Y@cp7-web-041.plabs.ch

To be clearer about our intentions to associate sequence numbers
and fence IDs, let's rename these variables.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-5-gurchetansingh@chromium.orgSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>

Currently, the fence ID, which can be used to identify a
virtgpu fence, is the same as the fence sequence number.

Let's use the fence_id name to clearly signal this.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-4-gurchetansingh@chromium.orgSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>

This provides a description of how the kernel driver uses the
shmid to determine capabilities.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-3-gurchetansingh@chromium.orgSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>

Easier to find where declarations are implemented.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-2-gurchetansingh@chromium.orgSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>

For coherency, all ioctls are suffixed
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201119010809.528-1-gurchetansingh@chromium.orgSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>

- Remove duplicate doc-comments for struct members
- Add missing @member markers for in-line member comments
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/grZIqIAOSUM7eNL0PurBsaWoILFwN2hEKd40Ylgzg@cp7-web-041.plabs.ch

When we have mixed DMA32 and non DMA32 device in one system
it could otherwise happen that the DMA32 device gets pages
it can't work with.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/401317/

Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.

v2: add more users of this.
v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup,
    add comments why we drop the reference on two occasions.
v4: make it clear that changing an anonymous vma is illegal.
v5: move vma_set_file to mm/util.c
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/399360/

Patch "495c10cc CHROMIUM: dma-buf: restore args..."
adds a workaround for a bug in mmap_region.

As the comment states ->mmap() callback can change
vma->vm_file and so we might call fput() on the wrong file.

Revert the workaround and proper fix this in mmap_region.

v2: drop the extra if in dma_buf_mmap as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/399359/

It's probably full of bugs ready for exploiting by userspace. And
there's not going to be any userspace for this without any of the drm
legacy drivers enabled too. So just couple it together.

Note that the frontend is only the /dev/agp ioctl interface, which per
Adam is only used by the i810 userspace drivers. All other drivers go
through the drm bufmap agp handling abstraction apparently.

v2: Augment commit message a bit from m-l feedback.
Acked-by: Adam Jackson <ajax@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117214029.591896-1-daniel.vetter@ffwll.ch

Fix check_patch.pl warning:
ERROR: do not use assignment in if condition
+                       if ((HALCYON_HEADER2 == (cmd = *buf)) &&

ERROR: do not use assignment in if condition
+                       if (HALCYON_HEADER2 == (cmd = *buf))
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118114021.105502-1-bernard@vivo.com

Fix a missing prototype warning for function
amdgpu_info_ioctl(),

drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c:482:5: warning: no previous prototype for 'amdgpu_info_ioctl' [-Wmissing-prototypes]
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110051548.685725-1-luben.tuikov@amd.com

Reorder the code to fix checking if blitting is available.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/401019/

I didnt' format the thing correctly :-(

Fixes: 39aead83 ("fbcon: Disable accelerated scrolling")
Reviewed-by: Simon Ser <contact@emersion.fr>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118073637.597206-1-daniel.vetter@ffwll.ch

In the macro for_each_oldnew_crtc_in_state() 'crtc_state' is provided
as a container for state->crtcs[i].new_state, but is not utilised in
some use-cases, so we fake-use it instead.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/imx/ipuv3-plane.c: In function ‘ipu_planes_assign_pre’:
 drivers/gpu/drm/imx/ipuv3-plane.c:746:42: warning: variable ‘crtc_state’ set but not used [-Wunused-but-set-variable]

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-43-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_debugfs.c:25: warning: Function parameter or member 'minor' not described in 'vc4_debugfs_init'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'dev' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'name' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'show' not described in 'vc4_debugfs_add_file'
 drivers/gpu/drm/vc4/vc4_debugfs.c:62: warning: Function parameter or member 'data' not described in 'vc4_debugfs_add_file'

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-41-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_v3d.c:131: warning: Function parameter or member 'vc4' not described in 'vc4_v3d_pm_get'
 drivers/gpu/drm/vc4/vc4_v3d.c:231: warning: Function parameter or member 'vc4' not described in 'bin_bo_alloc'

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-40-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_set_audio_infoframe’:
 drivers/gpu/drm/vc4/vc4_hdmi.c:334:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-39-lee.jones@linaro.org

The alternative is to move them into the source file that uses then,
but they are large and intrusive, so that strategy is being avoided.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vc4/vc4_hdmi_regs.h:282:39: warning: ‘vc5_hdmi_hdmi1_fields’ defined but not used [-Wunused-const-variable=]
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h:206:39: warning: ‘vc5_hdmi_hdmi0_fields’ defined but not used [-Wunused-const-variable=]
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h:145:39: warning: ‘vc4_hdmi_fields’ defined but not used [-Wunused-const-variable=]

Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-38-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/v3d/v3d_sched.c:75: warning: Function parameter or member 'sched_job' not described in 'v3d_job_dependency'
 drivers/gpu/drm/v3d/v3d_sched.c:75: warning: Function parameter or member 's_entity' not described in 'v3d_job_dependency'

Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-37-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/v3d/v3d_gem.c:292: warning: Function parameter or member 'bo_handles' not described in 'v3d_lookup_bos'
 drivers/gpu/drm/v3d/v3d_gem.c:292: warning: Function parameter or member 'bo_count' not described in 'v3d_lookup_bos'

Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-36-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/v3d/v3d_drv.c:73:32: warning: ‘v3d_v3d_pm_ops’ defined but not used [-Wunused-const-variable=]

Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-35-lee.jones@linaro.org