- 11 Mar, 2014 40 commits
-
-
Hans Verkuil authored
There is no reason why we shouldn't enable this here. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Hans Verkuil authored
v4l2_compliance fix. Signed-off-by:
-
Hans Verkuil authored
This resolves an issue raised by v4l2-compliance: if the given format does not exist, then pick a default format. While there is an exception regarding this for TV capture drivers, this m2m driver should do the right thing. Signed-off-by:
-
Hans Verkuil authored
The default of 1 second is a bit painful, switch to a 25 Hz framerate. Signed-off-by:
-
Seung-Woo Kim authored
This patch removes meaningless assignment of memory bank to itself. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Joonyoung Shim authored
There is no any reason to use comma here. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Lars-Peter Clausen authored
The adv7180 has a low power mode in which the analog and the digital processing section are shut down. Implement the s_power callback to let bridge drivers put the part into low power mode when not needed. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
Add support for async device registration to the adv7180 driver. Signed-off-by:
-
Lars-Peter Clausen authored
The proper way to handle IRQs that need to be able to sleep in their IRQ handler is to use a threaded IRQ. Signed-off-by:
-
Lars-Peter Clausen authored
The device driver core already prints out a very similar message when a driver fails to probe. No need to print one in the driver itself. Signed-off-by:
-
Lars-Peter Clausen authored
The device can't possibly be registered at this point, so no need to to call v4l2_device_unregister_subdev(). Signed-off-by:
-
Lars-Peter Clausen authored
Make sure to free the control handler when the device is removed. Signed-off-by:
-
Lars-Peter Clausen authored
The mutex is used in the subdev callbacks, so unregister the subdev before the mutex is destroyed. Signed-off-by:
-
Hans Verkuil authored
Document that it is now possible to call G/S_EDID from video nodes, not just sub-device nodes. Add a note that -EINVAL will be returned if the pad does not support EDIDs. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Support this ioctl as part of the v4l2 core. Use the new ioctl name and struct v4l2_edid type in the existing core code. Signed-off-by:
-
Hans Verkuil authored
Struct v4l2_subdev_edid and the VIDIOC_SUBDEV_G/S_EDID ioctls were specific for subdevices, but for hardware with a simple video pipeline you do not need/want to create subdevice nodes to just get/set the EDID. Move the v4l2_subdev_edid struct to v4l2-common.h and rename as v4l2_edid. Add the same ioctls to videodev2.h as well, thus allowing this API to be used with both video nodes and v4l-subdev nodes. Signed-off-by:
-
Hans Verkuil authored
The wrong ioctl numbers were used due to a copy-and-paste error. Signed-off-by:
-
Daniel Jeong authored
This patch adds the driver for the LM3646, dual LED Flash driver. The LM3646 has two 1.5A sync. boost converter with dual white current source. It is controlled via an I2C compatible interface. Each flash brightness, torch brightness and enable/disable can be controlled. Under voltage, input voltage monitor and thermal threshhold Faults are added. Please refer the datasheet http://www.ti.com/lit/ds/snvs962/snvs962.pdfSigned-off-by:
Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Daniel Jeong authored
Three Flash fault are added. V4L2_FLASH_FAULT_UNDER_VOLTAGE for the case low voltage below the min. limit. V4L2_FLASH_FAULT_INPUT_VOLTAGE for the case falling input voltage and chip adjust flash current not occur under voltage event. V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE for the case the temperature exceed the maximun limit Signed-off-by:
-
Daniel Jeong authored
Descriptions for flash faults V4L2_FLASH_FAULT_UNDER_VOLTAGE, V4L2_FLASH_FAULT_INPUT_VOLTAGE, and V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE. Removed spaces before tabs. Signed-off-by:
-
Andy Shevchenko authored
If we have no pdata defined and driver fails to register we leak memory. Converting to devm_kzalloc prevents this to happen. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Let's keep the style for all comments in the code, namely using small letters whenever it's possible. There is no functional change. Signed-off-by:
-
Andy Shevchenko authored
There is no need to keep the FSF address inside each file. Moreover, it might change in future which will make this one obsolete. There is no functional change. Signed-off-by:
-
Laurent Pinchart authored
Empty port nodes are allowed but currently unsupported as the v4l2_of_get_next_endpoint() function assumes that all port nodes have at least an endpoint. Fix this. Signed-off-by:
-
Guennadi Liakhovetski authored
Since I'm currently unable to dedicate sufficient time to the maintainership of these two drivers update their status to "orphan" until new maintainers appear. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Phil Edworthy authored
Add support for MBUS YUV10 BT656 and BT601 formats at rcar driver. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
-
sensoray-dev authored
Fixes memory leak introduced by commit 47d8c881. Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
-
Philipp Zabel authored
Set permissions on the debug module parameter to make it appear in sysfs. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Philipp Zabel authored
This patch fixes the following warning: drivers/media/i2c/tvp5150.c: In function '__tvp5150_try_crop': include/linux/kernel.h:762:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__min); \ ^ drivers/media/i2c/tvp5150.c:886:16: note: in expansion of macro 'clamp' rect->width = clamp(rect->width, ^ include/linux/kernel.h:763:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__max); \ ^ drivers/media/i2c/tvp5150.c:886:16: note: in expansion of macro 'clamp' rect->width = clamp(rect->width, ^ include/linux/kernel.h:762:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__min); \ ^ drivers/media/i2c/tvp5150.c:904:17: note: in expansion of macro 'clamp' rect->height = clamp(rect->height, ^ include/linux/kernel.h:763:17: warning: comparison of distinct pointer types lacks a cast [enabled by default] (void) (&__val == &__max); \ ^ drivers/media/i2c/tvp5150.c:904:17: note: in expansion of macro 'clamp' rect->height = clamp(rect->height, ^ Signed-off-by: -
Dan Carpenter authored
This code is correct but the indenting is wrong and triggers a static checker warning "add curly braces?". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jon Mason authored
Use PCI_VENDOR_ID_INTEL instead of creating its own vendor ID #define. Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Hans Verkuil authored
The NV16M description contained some copy-and-paste text from NV12M, suggesting that this format is a 4:2:0 format when it really is a 4:2:2 format. Fixed the text. Signed-off-by:
-
Arnd Bergmann authored
interruptible_sleep_on is racy and going away. In the arv driver that race has probably never caused problems since it would require a whole video frame to be captured before the read function has a chance to go to sleep, but using wait_event_interruptible lets us kill off the old interface. In order to do this, we have to slightly adapt the meaning of the ar->start_capture field to distinguish between not having started a frame and having completed it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: warning: (VIDEO_DM6446_CCDC && VIDEO_DM355_CCDC && VIDEO_DM365_ISIF && VIDEO_OMAP2_VOUT && VIDEO_SH_VOU && VIDEO_VIU && VIDEO_TIMBERDALE && VIDEO_MX1 && VIDEO_OMAP1) selects VIDEOBUF_DMA_CONTIG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA) drivers/built-in.o: In function `videobuf_vm_close': videobuf-dma-contig.c:(.text+0x407aa0): undefined reference to `videobuf_queue_cancel' drivers/built-in.o: In function `__videobuf_dc_alloc': videobuf-dma-contig.c:(.text+0x407ba2): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `__videobuf_mmap_mapper': videobuf-dma-contig.c:(.text+0x407d44): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `free_buffer': sh_vou.c:(.text+0x41f73a): undefined reference to `videobuf_waiton' drivers/built-in.o: In function `sh_vou_poll': sh_vou.c:(.text+0x41f884): undefined reference to `videobuf_poll_stream' drivers/built-in.o: In function `sh_vou_buf_prepare': sh_vou.c:(.text+0x41fdf6): undefined reference to `videobuf_iolock' drivers/built-in.o: In function `sh_vou_reqbufs': sh_vou.c:(.text+0x4203b0): undefined reference to `videobuf_reqbufs' drivers/built-in.o: In function `sh_vou_querybuf': sh_vou.c:(.text+0x42040a): undefined reference to `videobuf_querybuf' drivers/built-in.o: In function `sh_vou_qbuf': sh_vou.c:(.text+0x42045e): undefined reference to `videobuf_qbuf' drivers/built-in.o: In function `sh_vou_dqbuf': sh_vou.c:(.text+0x4204c2): undefined reference to `videobuf_dqbuf' drivers/built-in.o: In function `sh_vou_streamon': sh_vou.c:(.text+0x420572): undefined reference to `videobuf_streamon' drivers/built-in.o: In function `sh_vou_streamoff': sh_vou.c:(.text+0x4205d2): undefined reference to `videobuf_streamoff' drivers/built-in.o: In function `sh_vou_mmap': sh_vou.c:(.text+0x420c46): undefined reference to `videobuf_mmap_mapper' VIDEO_SH_VOU selects VIDEOBUF_DMA_CONTIG, which bypasses its dependency on HAS_DMA. Make VIDEO_SH_VOU depend on HAS_DMA to fix this. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Hans Verkuil authored
BUG_ON is unnecessarily strict. Signed-off-by:
-
Fengguang Wu authored
[media] drivers/media/usb/usbtv/usbtv-core.c:119:22: sparse: symbol 'usbtv_id_table' was not declared. Should it be static? tree: git://linuxtv.org/media_tree.git master head: a3550ea6 commit: a3550ea6 [499/499] [media] usbtv: split core and video implementation reproduce: make C=1 CF=-D__CHECK_ENDIAN__ sparse warnings: (new ones prefixed by >>) >> drivers/media/usb/usbtv/usbtv-core.c:119:22: sparse: symbol 'usbtv_id_table' was not declared. Should it be static? >> drivers/media/usb/usbtv/usbtv-core.c:129:19: sparse: symbol 'usbtv_usb_driver' was not declared. Should it be static? Signed-off-by:
-
Mauro Carvalho Chehab authored
There are two troubles there: 1) the bit error measure were not accumulating; 2) it was missing the bit count. Fix them. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/dvb-frontends/drx39xyj/drxj.c: In function 'ctrl_get_qam_sig_quality': drivers/media/dvb-frontends/drx39xyj/drxj.c:9468:6: warning: variable 'ber_cnt' set but not used [-Wunused-but-set-variable] u32 ber_cnt = 0; /* BER count */ ^ By reading the comment, it is said that BER should be calculated as: qam_pre_rs_ber = frac_times1e6( ber_cnt, rs_bit_cnt ); Also, it makes sense to take the mantissa into account, so fix the code to do what's commented. Signed-off-by: -
Mauro Carvalho Chehab authored
Now that everything is set, let's enable DVBv5 stats, for applications that support it. DVBv3 apps will still work. Signed-off-by:
-
