- 25 Jun, 2024 37 commits
-
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by:
Trevor Gamblin <tgamblin@baylibre.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
George Stark <gnstark@salutedevices.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Nuno Sa <nuno.sa@analog.com> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Trevor Gamblin authored
Instead of using regmap_update_bits() and passing the mask twice, use regmap_set_bits(). Instead of using regmap_update_bits() and passing val = 0, use regmap_clear_bits(). Suggested-by:
-
Dumitru Ceclan authored
Add support for AD4111/AD4112/AD4114/AD4115/AD4116. The AD411X family encompasses a series of low power, low noise, 24-bit, sigma-delta analog-to-digital converters that offer a versatile range of specifications. This family of ADCs integrates an analog front end suitable for processing both fully differential and single-ended, bipolar voltage inputs addressing a wide array of industrial and instrumentation requirements. - All ADCs have inputs with a precision voltage divider with a division ratio of 10. - AD4116 has 5 low level inputs without a voltage divider. - AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm shunt resistor. Signed-off-by:
Dumitru Ceclan <dumitru.ceclan@analog.com> Reviewed-by:
David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240607-ad4111-v7-9-97e3855900a0@analog.comSigned-off-by:
-
Dumitru Ceclan authored
The ADCs supported by this driver feature a sequencer that read in a loop all the enabled chanels. When setting the individual sampling frequency for each channel and enabling multiple channels, the effective of each channel will be lower than the actual set value. Document this behaviour in a comment. Reviewed-by:
-
Dumitru Ceclan authored
Drop setting .has_temp and .has_input_buf to false in device info struct. Drop array of device info structs and use individual structs for all; drop models enum as no longer needed. This improves readability as the structs are pointed directly. Reviewed-by:
-
Dumitru Ceclan authored
Add support for selecting REF+ and REF- inputs on all models. Add support for selecting ((AVDD1 − AVSS)/5) inputs on supported models. Signed-off-by:
-
Dumitru Ceclan authored
Move validation of analog inputs and reference voltage selection to separate functions to reduce the size of the channel config parsing function and improve readability. Add defines for the number of analog inputs in a channel. Signed-off-by:
-
Dumitru Ceclan authored
Move configurations regarding number of channels from *_fw_parse_device_config to *_fw_parse_channel_config. Suggested-by:
-
Dumitru Ceclan authored
Sigma delta ADCs with a sequencer need to disable the previously enabled channel when reading using ad_sigma_delta_single_conversion(). This was done manually in drivers for devices with sequencers. This patch implements handling of single channel disabling after a single conversion. Reviewed-by:
-
- 22 Jun, 2024 3 commits
-
-
Dumitru Ceclan authored
Add support for: AD4111, AD4112, AD4114, AD4115, AD4116. AD411x family ADCs support a VCOM pin. The purpose of this pin is to offer a dedicated common-mode voltage input for single-ended channels. This pin is specified as supporting a differential channel with VIN10 on model AD4116. AD4111/AD4112 support current channels. Support is implemented using single-channel and "adi,current-channel". Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Dumitru Ceclan authored
There are ADCs that are differential but support to measure single-ended signals on the same channels by connecting a constant voltage to the negative input pin. This property allows to properly define a single-ended channel that requires two inputs to be specified. Software can use the presence of this property to mark the channel as not differential. Reviewed-by:
-
David Lechner authored
This makes use of the new devm_regulator_get_enable_read_voltage() function to reduce boilerplate code. Signed-off-by:
-
