- 19 Jun, 2013 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Alex writes: Remove some harmless but confusing VM related error messages fix a regression with suspend and UVD, fix UVD on big endian. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix UVD on big endian drm/radeon: fix write back suspend regression with uvd v2 drm/radeon: do not try to uselessly update virtual memory pagetable
-
Laurent Pinchart authored
The DRM PRIME API passes file flags to the driver for the exported buffer. Honor them instead of hardcoding 0600. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
- 14 Jun, 2013 1 commit
-
-
Alex Deucher authored
This fixes the kernel side so that the ring should come up and ring and IB tests should work. The userspace UVD drivers will also need big endian fixes. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 12 Jun, 2013 2 commits
-
-
Jerome Glisse authored
UVD ring can't use scratch thus it does need writeback buffer to keep a valid address or radeon_ring_backup will trigger a kernel fault. It's ok to not unpin the write back buffer on suspend as it leave in gtt and thus does not need eviction. v2: Fix the uvd case. Reported and tracked by Wojtek <wojtask9@wp.pl> Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jerome Glisse authored
If a buffer is never bound to a virtual memory pagetable than don't try to unbind it. Only drawback is that we don't update the pagetable when unbinding the ib pool buffer which is fine because it only happens at suspend or module unload/shutdown. Fixes spurious messages about buffers without VM mappings. E.g.: radeon 0000:01:00.0: bo ffff88020afac400 don't has a mapping in vm ffff88021ca2b900 Cc: stable@kernel.org Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 11 Jun, 2013 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2013-06-11' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Just tiny regression fixes here: - Two fixes to fix sdvo hotplug which broke in the hpd storm detection work. - One fix to patch-up the sdvo lvds regression fixer from the last pull - we need to prefer the vbt mode over edid modes. * tag 'drm-intel-fixes-2013-06-11' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: prefer VBT modes for SVDO-LVDS over EDID drm/i915: Enable hotplug interrupts after querying hw capabilities. drm/i915: Fix hotplug interrupt enabling for SDVOC
-
- 10 Jun, 2013 11 commits
-
-
git://github.com/patjak/drm-gma500Dave Airlie authored
Patrik writes: Two fixes for memory leaks split into Cedarview and Poulsbo versions, and a fix for properly setting the pipe base when using fbdev. It's on my todo-list to start unifying the chips since they are very similar, but until then I'd like to split them up in case there are side-effects on Cedarview that I cannot currently test. airled: Verified pull from github matches what I expected. * 'gma500-fixes' of git://github.com/patjak/drm-gma500: drm/gma500/cdv: Fix cursor gem obj referencing on cdv drm/gma500/psb: Fix cursor gem obj referencing on psb drm/gma500/cdv: Unpin framebuffer on crtc disable drm/gma500/psb: Unpin framebuffer on crtc disable drm/gma500: Add fb gtt offset to fb base
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A few nasty issues, particularly a race with the interrupt controller in the xilinx driver, together with a couple of more minor fixes and a much needed move of the mailing list away from sourceforge." * tag 'spi-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: hspi: fixup long delay time spi: spi-xilinx: Remove ISR race condition spi: topcliff-pch: fix error return code in pch_spi_probe() spi: topcliff-pch: Pass correct pointer to free_irq() spi: Move mailing list to vger
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two bug-fixes for regressions: - xen/tmem stopped working after a certain combination of modprobe/swapon was used - cpu online/offlining would trigger WARN_ON." * tag 'stable/for-linus-3.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tmem: Don't over-write tmem_frontswap_poolid after tmem_frontswap_init set it. xen/smp: Fixup NOHZ per cpu data when onlining an offline CPU.
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixes from Mark Brown: "The biggest fix here is Lars-Peter's fix for custom locking callbacks which is pretty localised but important for those devices that use the feature. Otherwise we've got a couple of fairly small cleanups which would have been sent sooner were it not for letting Lars-Peter's patch soak for a while" * tag 'regmap-v3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: rbtree: Fixed node range check on sync regmap: regcache: Fixup locking for custom lock callbacks regmap: debugfs: Check return value of regmap_write()
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a build problem in sahara and temporarily disables two new optimisations because of performance regressions until a permanent fix is ready" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sahara - fix building as module crypto: blowfish - disable AVX2 implementation crypto: twofish - disable AVX2 implementation
-
Konrad Rzeszutek Wilk authored
Commit 10a7a077 ("xen: tmem: enable Xen tmem shim to be built/loaded as a module") allows the tmem module to be loaded any time. For this work the frontswap API had to be able to asynchronously to call tmem_frontswap_init before or after the swap image had been set. That was added in git commit 905cd0e1 ("mm: frontswap: lazy initialization to allow tmem backends to build/run as modules"). Which means we could do this (The common case): modprobe tmem [so calls frontswap_register_ops, no ->init] modifies tmem_frontswap_poolid = -1 swapon /dev/xvda1 [__frontswap_init, calls -> init, tmem_frontswap_poolid is < 0 so tmem hypercall done] Or the failing one: swapon /dev/xvda1 [calls __frontswap_init, sets the need_init bitmap] modprobe tmem [calls frontswap_register_ops, -->init calls, finds out tmem_frontswap_poolid is 0, does not make a hypercall. Later in the module_init, sets tmem_frontswap_poolid=-1] Which meant that in the failing case we would not call the hypercall to initialize the pool and never be able to make any frontswap backend calls. Moving the frontswap_register_ops after setting the tmem_frontswap_poolid fixes it. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Bob Liu <bob.liu@oracle.com>
-
Daniel Vetter authored
In commit 53d3b4d7 Author: Egbert Eich <eich@suse.de> Date: Tue Jun 4 17:13:21 2013 +0200 drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC Egbert Eich fixed a long-standing bug where we simply used a non-working i2c controller to read the EDID for SDVO-LVDS panels. Unfortunately some machines seem to not be able to cope with the mode provided in the EDID. Specifically they seem to not be able to cope with a 4x pixel mutliplier instead of a 2x one, which seems to have been worked around by slightly changing the panels native mode in the VBT so that the dotclock is just barely above 50MHz. Since it took forever to notice the breakage it's fairly safe to assume that at least for SDVO-LVDS panels the VBT contains fairly sane data. So just switch around the order and use VBT modes first. v2: Also add EDID modes just in case, and spell Egbert correctly. v3: Elaborate a bit more about what's going on on Chris' machine. Cc: Egbert Eich <eich@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524 Cc: stable@vger.kernel.org Reported-and-tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
sdvo->hotplug_active is initialised during intel_sdvo_setup_outputs(), and so we never enabled the hotplug interrupts on SDVO as we were checking too early. This regression has been introduced somewhere in the hpd rework for the storm detection and handling starting with commit 1d843f9d Author: Egbert Eich <eich@suse.de> Date: Mon Feb 25 12:06:49 2013 -0500 DRM/I915: Add enum hpd_pin to intel_encoder. and the follow-up patches to use the new encoder->hpd_pin variable for the different irq setup functions. The problem is that encoder->hpd_pin was set up _before_ the output setup was done and so before we could assess the hotplug capabilities of the outputs on an sdvo encoder. Reported-by:
Alex Fiestas <afiestas@kde.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add regression note.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
A broken conditional would lead to SDVOC waiting upon hotplug events on SDVOB - and so miss all activity on its SDVO port. This regression has been introduced in commit 1d843f9d Author: Egbert Eich <eich@suse.de> Date: Mon Feb 25 12:06:49 2013 -0500 DRM/I915: Add enum hpd_pin to intel_encoder. References: https://bugs.freedesktop.org/show_bug.cgi?id=58405Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add regression note.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Benjamin Herrenschmidt: "This is purely regressions (though not all recent ones) or stable material" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Partial revert of "Context switch more PMU related SPRs" powerpc/perf: Fix deadlock caused by calling printk() in PMU exception powerpc/hw_breakpoints: Add DABRX cpu feature to fix 32-bit regression powerpc/power8: Update denormalization handler powerpc/pseries: Simplify denormalization handler powerpc/power8: Fix oprofile and perf powerpc/eeh: Don't check RTAS token to get PE addr powerpc/pci: Check the bus address instead of resource address in pcibios_fixup_resources
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "The biggest two fixes are fixing a compilation error with the decompressor, and a problem with our __my_cpu_offset implementation. Other changes are very trivial and small, which seems to be the way for most -rc stuff." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7747/1: pcpu: ensure __my_cpu_offset cannot be re-ordered across barrier() ARM: 7750/1: update legacy CPU ID in decompressor cache support jump table ARM: 7743/1: compressed/head.S: work around new binutils warning ARM: 7742/1: topology: export cpu_topology ARM: 7737/1: fix kernel decompressor compilation error with CONFIG_DEBUG_SEMIHOSTING
-
- 09 Jun, 2013 15 commits
-
-
Michael Ellerman authored
In commit 59affcd3 I added context switching of more PMU SPRs, because they are potentially exposed to userspace on Power8. However despite me being a smart arse in the commit message it's actually not correct. In particular it interacts badly with a global perf record. We will have to do something more complicated, but that will have to wait for 3.11. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
In commit bc09c219 "Fix finding overflowed PMC in interrupt" we added a printk() to the PMU exception handler. Unfortunately that is not safe. The problem is that the PMU exception may run even when interrupts are soft disabled, aka NMI context. We do this so that we can profile parts of the kernel that have interrupts soft-disabled. But by calling printk() from the exception handler, we can potentially deadlock in the printk code on logbuf_lock, eg: [c00000038ba575c0] c000000000081928 .vprintk_emit+0xa8/0x540 [c00000038ba576a0] c0000000007bcde8 .printk+0x48/0x58 [c00000038ba57710] c000000000076504 .perf_event_interrupt+0x2d4/0x490 [c00000038ba57810] c00000000001f6f8 .performance_monitor_exception+0x48/0x60 [c00000038ba57880] c0000000000032cc performance_monitor_common+0x14c/0x180 --- Exception: f01 (Performance Monitor) at c0000000007b25d4 ._raw_spin_lock_irq +0x64/0xc0 [c00000038ba57bf0] c00000000007ed90 .devkmsg_read+0xd0/0x5a0 [c00000038ba57d00] c0000000001c2934 .vfs_read+0xc4/0x1e0 [c00000038ba57d90] c0000000001c2cd8 .SyS_read+0x58/0xd0 [c00000038ba57e30] c000000000009d54 syscall_exit+0x0/0x98 --- Exception: c01 (System Call) at 00001fffffbf6f7c SP (3ffff6d4de10) is in userspace Fix it by making sure we only call printk() when we are not in NMI context. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Cc: <stable@vger.kernel.org> # 3.9 Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
When introducing support for DABRX in 4474ef05, we broke older 32-bit CPUs that don't have that register. Some CPUs have a DABR but not DABRX. Configuration are: - No 32bit CPUs have DABRX but some have DABR. - POWER4+ and below have the DABR but no DABRX. - 970 and POWER5 and above have DABR and DABRX. - POWER8 has DAWR, hence no DABRX. This introduces CPU_FTR_DABRX and sets it on appropriate CPUs. We use the top 64 bits for CPU FTR bits since only 64 bit CPUs have this. Processors that don't have the DABRX will still work as they will fall back to software filtering these breakpoints via perf_exclude_event(). Signed-off-by:
Michael Neuling <mikey@neuling.org> Reported-by:
"Gorelik, Jacob (335F)" <jacob.gorelik@jpl.nasa.gov> cc: stable@vger.kernel.org (v3.9 only) Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
POWER8 can take a denormalisation exception on any VSX registers. This does the extra 32 VSX registers we don't currently handle. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
The following simplifies the denorm code by using macros to generate the long stream of almost identical instructions. This patch results in no changes to the output binary, but removes a lot of lines of code. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
In 2ac6f427 powerpc/cputable: Fix oprofile_cpu_type on power8 we broke all power8 hw events. This reverts this change and uses oprofile_type instead. Perf now works on POWER8 again and oprofile will revert to using timers on POWER8. Kudos to mpe this fix. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
RTAS token "ibm,get-config-addr-info" or ibm,get-config-addr-info2" are used to retrieve the PE address according to PCI address, which made up of domain/bus/slot/function. If we don't have those 2 tokens, the domain/bus/slot/function would be used as the address for EEH RTAS operations. Some older f/w might not have those 2 tokens and that blocks the EEH functionality to be initialized. It was introduced by commit e2af155c ("powerpc/eeh: pseries platform EEH initialization"). The patch skips the check on those 2 tokens so we can bring up EEH functionality successfully. And domain/bus/slot/function will be used as address for EEH RTAS operations. Cc: <stable@vger.kernel.org> # v3.4+ Reported-by:
Robert Knight <knight@princeton.edu> Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Tested-by:
Robert Knight <knight@princeton.edu> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
If a BAR has the value of 0, we would assume that it is unset yet and then mark the resource as unset and would reassign it later. But after commit 6c5705fe (powerpc/PCI: get rid of device resource fixups) the pcibios_fixup_resources is invoked after the bus address was translated to linux resource. So the value of res->start is resource address. And since the resource and bus address may be different, we should translate it to the bus address before doing the check. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fix from Guenter Roeck: "Improve chip detection in ADM1021 driver to avoid misdetections This is not a critical patch, but one we'll want to have applied to -stable, since the misdetection especially of LM84 has been causing trouble for quite some time." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617
-
Patrik Jakobsson authored
The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Cedarview chips. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
Patrik Jakobsson authored
The internal crtc cursor gem object pointer was never set/updated since it was required to be set in the first place. Fixing this will make the pin/unpin count match and prevent cursor objects from leaking when userspace drops all references to it. Also make sure we drop the gem obj reference on failure. This patch only affects Poulsbo chips. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
Patrik Jakobsson authored
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Cedarview. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
Patrik Jakobsson authored
The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Poulsbo. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113 Cc: stable@vger.kernel.org Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
Linus Torvalds authored
-
Mikulas Patocka authored
This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by:
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org # 2.6.39+ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 08 Jun, 2013 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: - Trivial: unused variable removal - Posix-timers: Add the clock ID to the new proc interface to make it useful. The interface is new and should be functional when we reach the final 3.10 release. - Cure a false positive warning in the tick code introduced by the overhaul in 3.10 - Fix for a persistent clock detection regression introduced in this cycle * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Correct run-time detection of persistent_clock. ntp: Remove unused variable flags in __hardpps posix-timers: Show clock ID in proc file tick: Cure broadcast false positive pending bit warning
-
git://git.secretlab.ca/git/linuxLinus Torvalds authored
Pull irqdomain bug fixes from Grant Likely: "This branch contains a set of straight forward bug fixes to the irqdomain code and to a couple of drivers that make use of it." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux: irqchip: Return -EPERM for reserved IRQs irqdomain: document the simple domain first_irq kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. irqdomain: export irq_domain_add_simple
-
Grant Likely authored
The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by:
Grant Likely <grant.likely@linaro.org>
-
Linus Walleij authored
The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Grant Likely <grant.likely@linaro.org>
-
Chen Gang authored
Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org>
-
Arnd Bergmann authored
All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Grant Likely <grant.likely@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes for arm-soc platforms. Nothing controversial here, a handful of fixes for regressions and/or serious problems across several of the platforms. Things are slowing down nicely on fix rates for 3.10" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: add debug_ll_io_init() call in exynos_init_io() ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins ARM: mxs: icoll: Fix interrupts gpio bank 0 ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: bcm2835: override the HW UART periphid ARM: mvebu: Fix bug in coherency fabric low level init function ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 ARM: ux500: Only configure wake-up reasons on ux500 based platforms ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "MIPS fixes across the field. The only area that's standing out is the exception handling which received it's dose of breakage as part of the microMIPS patchset" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: add missing SZ_1M multiplier MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf. MIPS: OCTEON: Improve _machine_halt implementation. MIPS: rtlx: Fix implicit declaration of function set_vi_handler() MIPS: Trap exception handling fixes MIPS: Quit exposing Kconfig symbols in uapi headers. MIPS: Remove duplicate definition of check_for_high_segbits.
-