- 06 Jan, 2016 36 commits
-
-
Andy Leiserson authored
commit 904dad47 upstream. "group" is the group where the backup will be placed, and is initialized to zero in the declaration. This meant that backups for meta_bg descriptors were erroneously written to the backup block group descriptors in groups 1 and (desc_per_block-1). Reproduction information: mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G truncate -s 24G /tmp/foo.img losetup /dev/loop0 /tmp/foo.img mount /dev/loop0 /mnt resize2fs /dev/loop0 umount /dev/loop0 dd if=/dev/zero of=/dev/loop0 bs=1024 count=2 e2fsck -fy /dev/loop0 losetup -d /dev/loop0 Signed-off-by:
Andy Leiserson <andy@leiserson.org> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Jan Kara authored
commit 33d14975 upstream. Unlike comments and expectation of callers journal_clean_one_cp_list() returned 1 not only if it freed the transaction but also if it freed some buffers in the transaction. That could make __jbd2_journal_clean_checkpoint_list() skip processing t_checkpoint_io_list and continue with processing the next transaction. This is mostly a cosmetic issue since the only result is we can sometimes free less memory than we could. But it's still worth fixing. Fix journal_clean_one_cp_list() to return 1 only if the transaction was really freed. Fixes: 50849db3Signed-off-by:
Jan Kara <jack@suse.com> Signed-off-by:
-
Will Deacon authored
commit c0733a2c upstream. The bitmap allocator returns an int, which is one of the standard negative values on failure. Rather than assigning this straight to a u16 (like we do for the ASID and VMID callers), which means that we won't detect failure correctly, use an int for the purposes of error checking. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
David Woodhouse authored
commit d14053b3 upstream. The VT-d specification says that "Software must enable ATS on endpoint devices behind a Root Port only if the Root Port is reported as supporting ATS transactions." We walk up the tree to find a Root Port, but for integrated devices we don't find one — we get to the host bridge. In that case we *should* allow ATS. Currently we don't, which means that we are incorrectly failing to use ATS for the integrated graphics. Fix that. We should never break out of this loop "naturally" with bus==NULL, since we'll always find bridge==NULL in that case (and now return 1). So remove the check for (!bridge) after the loop, since it can never happen. If it did, it would be worthy of a BUG_ON(!bridge). But since it'll oops anyway in that case, that'll do just as well. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 0ad95472 upstream. Commit cb7323ff ("lockd: create and use per-net NSM RPC clients on MON/UNMON requests") introduced per-net NSM RPC clients. Unfortunately this doesn't make any sense without per-net nsm_handle. E.g. the following scenario could happen Two hosts (X and Y) in different namespaces (A and B) share the same nsm struct. 1. nsm_monitor(host_X) called => NSM rpc client created, nsm->sm_monitored bit set. 2. nsm_mointor(host-Y) called => nsm->sm_monitored already set, we just exit. Thus in namespace B ln->nsm_clnt == NULL. 3. host X destroyed => nsm->sm_count decremented to 1 4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr dereference of *ln->nsm_clnt So this could be fixed by making per-net nsm_handles list, instead of global. Thus different net namespaces will not be able share the same nsm_handle. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Vignesh R authored
commit bc27a539 upstream. Writing invalid command to QSPI_SPI_CMD_REG will terminate current transfer and de-assert the chip select. This has to be done before calling spi_finalize_current_message(). Because spi_finalize_current_message() will mark the end of current message transfer and schedule the next transfer. If the chipselect is not de-asserted before calling spi_finalize_current_message() then the next transfer will overlap with the previous transfer leading to data corruption. __spi_pump_message() can be called either from kthread worker context or directly from the calling process's context. It is possible that these two calls can race against each other. But race is serialized by checking whether master->cur_msg == NULL (pointer to msg being handled by transfer_one() at present). The master->cur_msg is set to NULL when spi_finalize_current_message() is called on that message, which means calling spi_finalize_current_message() allows __spi_sync() to pump next message in calling process context. Now if spi-ti-qspi calls spi_finalize_current_message() before we terminate transfer at hardware side, if __spi_pump_message() is called from process context then the successive transactions can overlap. Fix this by moving writing invalid command to QSPI_SPI_CMD_REG to before calling spi_finalize_current_message() call. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
commit 569cf187 upstream. We got dentry pages from high_mem, and its address space directly goes into the decryption path via f2fs_fname_disk_to_usr. But, sg_init_one assumes the address is not from high_mem, so we can get this panic since it doesn't call kmap_high but kunmap_high is triggered at the end. kernel BUG at ../../../../../../kernel/mm/highmem.c:290! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM ... (kunmap_high+0xb0/0xb8) from [<c0114534>] (__kunmap_atomic+0xa0/0xa4) (__kunmap_atomic+0xa0/0xa4) from [<c035f028>] (blkcipher_walk_done+0x128/0x1ec) (blkcipher_walk_done+0x128/0x1ec) from [<c0366c24>] (crypto_cbc_decrypt+0xc0/0x170) (crypto_cbc_decrypt+0xc0/0x170) from [<c0367148>] (crypto_cts_decrypt+0xc0/0x114) (crypto_cts_decrypt+0xc0/0x114) from [<c035ea98>] (async_decrypt+0x40/0x48) (async_decrypt+0x40/0x48) from [<c032ca34>] (f2fs_fname_disk_to_usr+0x124/0x304) (f2fs_fname_disk_to_usr+0x124/0x304) from [<c03056fc>] (f2fs_fill_dentries+0xac/0x188) (f2fs_fill_dentries+0xac/0x188) from [<c03059c8>] (f2fs_readdir+0x1f0/0x300) (f2fs_readdir+0x1f0/0x300) from [<c0218054>] (vfs_readdir+0x90/0xb4) (vfs_readdir+0x90/0xb4) from [<c0218418>] (SyS_getdents64+0x64/0xcc) (SyS_getdents64+0x64/0xcc) from [<c0105ba0>] (ret_fast_syscall+0x0/0x30) Reviewed-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Dmitry Kasatkin authored
commit 72e1eed8 upstream. If IMA_LOAD_X509 is enabled, either directly or indirectly via IMA_APPRAISE_SIGNED_INIT, certificates are loaded onto the IMA trusted keyring by the kernel via key_create_or_update(). When the KEY_ALLOC_TRUSTED flag is provided, certificates are loaded without first verifying the certificate is properly signed by a trusted key on the system keyring. This patch removes the KEY_ALLOC_TRUSTED flag. Signed-off-by:
Dmitry Kasatkin <dmitry.kasatkin@huawei.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Chris Wilson authored
commit e4b946bf upstream. Michał Winiarski found a really evil way to trigger a struct_mutex deadlock with userptr. He found that if he allocated a userptr bo and then GTT mmaped another bo, or even itself, at the same address as the userptr using MAP_FIXED, he could then cause a deadlock any time we then had to invalidate the GTT mmappings (so at will). Tvrtko then found by repeatedly allocating GTT mmappings he could alias with an old userptr mmap and also trigger the deadlock. To counter act the deadlock, we make the observation that we only need to take the struct_mutex if the object has any pages to revoke, and that before userspace can alias with the userptr address space, it must have invalidated the userptr->pages. Thus if we can check for those pages outside of the struct_mutex, we can avoid the deadlock. To do so we introduce a separate flag for userptr objects that we can inspect from the mmu-notifier underneath its spinlock. The patch makes one eye-catching change. That is the removal serial=0 after detecting a to-be-freed object inside the invalidate walker. I felt setting serial=0 was a questionable pessimisation: it denies us the chance to reuse the current iterator for the next loop (before it is freed) and being explicit makes the reader question the validity of the locking (since the object-free race could occur elsewhere). The serialisation of the iterator is through the spinlock, if the object is freed before the next loop then the notifier.serial will be incremented and we start the walk from the beginning as we detect the invalid cache. To try and tame the error paths and interactions with the userptr->active flag, we have to do a fair amount of rearranging of get_pages_userptr(). v2: Grammar fixes v3: Reorder set-active so that it is only set when obj->pages is set (and so needs cancellation). Only the order of setting obj->pages and the active-flag is crucial. Calling gup after invalidate-range begin means the userptr sees the new set of backing storage (and so will not need to invalidate its new pages), but we have to be careful not to set the active-flag prior to successfully establishing obj->pages. v4: Take the active->flag early so we know in the mmu-notifier when we have to cancel a pending gup-worker. v5: Rearrange the error path so that is not so convoluted v6: Set pinned to 0 when negative before calling release_pages() Reported-by:
Michał Winiarski <michal.winiarski@intel.com> Testcase: igt/gem_userptr_blits/map-fixed* Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
commit 68d6c840 upstream. The userptr worker allows for a slight race condition where upon there may two or more threads calling get_user_pages for the same object. When we have the array of pages, then we serialise the update of the object. However, the worker should only overwrite the obj->userptr.work pointer if and only if it is the active one. Currently we clear it for a secondary worker with the effect that we may rarely force a second lookup. v2: Rebase and rename a variable to avoid 80cols v3: Mention v2 Signed-off-by:
-
Richard Weinberger authored
commit 1cb8f977 upstream. If fastmap requests a free PEB for a pool and UBI is busy with erasing PEBs we need to offer a function to wait for one. We can reuse produce_free_peb() from the non-fastmap WL code but with different locking semantics. Reported-and-tested-by:
Jörg Krause <joerg.krause@embedded.rocks> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Benoit Parrot authored
commit a8077734 upstream. When trying to use v4l2_ctrl_g_ctrl_int64() to retrieve a V4L2_CTRL_TYPE_INTEGER64 type value the internal helper function get_ctrl() would prematurely exit because for this control type the 'is_int' flag is not set. This would result in v4l2_ctrl_g_ctrl_int64 always returning 0. Also v4l2_ctrl_g_ctrl_int64() is reading and returning the 32bit value member instead of the 64bit version, so fixing that as well. This patch extends the condition check to allow the V4L2_CTRL_TYPE_INTEGER64 type to continue processing instead of exiting. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Hans Verkuil authored
commit 35204e2e upstream. Array controls weren't skipped when only V4L2_CTRL_FLAG_NEXT_CTRL was provided (so no V4L2_CTRL_FLAG_NEXT_COMPOUND was set). This is wrong since arrays are also considered compound controls (i.e. with more than one value), and applications that do not know about arrays will not be able to handle such controls. Fix the test to include arrays. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Boris BREZILLON authored
commit e5bae867 upstream. If we fail to allocate a partition structure in the middle of the partition creation process, the already allocated partitions are never removed, which means they are still present in the partition list and their resources are never freed. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Andrzej Hajda authored
commit 655e9780 upstream. Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match compatible ioctls on ARM64 kernels without breaking AMD64 some fields should be aligned using compat_s64 type and in one case struct should be unpacked. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> [hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32] Signed-off-by:
-
Richard Purdie authored
commit 79b568b9 upstream. hid_connect adds various strings to the buffer but they're all conditional. You can find circumstances where nothing would be written to it but the kernel will still print the supposedly empty buffer with printk. This leads to corruption on the console/in the logs. Ensure buf is initialized to an empty string. Signed-off-by:
Richard Purdie <richard.purdie@linuxfoundation.org> [dvhart: Initialize string to "" rather than assign buf[0] = NULL;] Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Paolo Bonzini authored
commit cbdb967a upstream. This is needed to avoid the possibility that the guest triggers an infinite stream of #DB exceptions (CVE-2015-8104). VMX is not affected: because it does not save DR6 in the VMCS, it already intercepts #DB unconditionally. Reported-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Herbert Xu authored
commit 93efac3f upstream. The IPv6 IPsec pre-encap path performs fragmentation for tunnel-mode packets. That is, we perform fragmentation pre-encap rather than post-encap. A check was added later to ensure that proper MTU information is passed back for locally generated traffic. Unfortunately this check was performed on all IPsec packets, including transport-mode packets. What's more, the check failed to take GSO into account. The end result is that transport-mode GSO packets get dropped at the check. This patch fixes it by moving the tunnel mode check forward as well as adding the GSO check. Fixes: dd767856 ("xfrm6: Don't call icmpv6_send on local error") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Salva Peiró authored
commit 4b618433 upstream. The dgnc_mgmt_ioctl() code fails to initialize the 16 _reserved bytes of struct digi_dinfo after the ->dinfo_nboards member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by:
Salva Peiró <speirofr@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Salva Peiró authored
commit eda98796 upstream. The vivid_fb_ioctl() code fails to initialize the 16 _reserved bytes of struct fb_vblank after the ->hcount member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by:
-
Ben Hutchings authored
commit 4ab42d78 upstream. Currently slhc_init() treats out-of-range values of rslots and tslots as equivalent to 0, except that if tslots is too large it will dereference a null pointer (CVE-2015-7799). Add a range-check at the top of the function and make it return an ERR_PTR() on error instead of NULL. Change the callers accordingly. Compile-tested only. Reported-by:
郭永刚 <guoyonggang@360.cn> References: http://article.gmane.org/gmane.comp.security.oss.general/17908Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ben Hutchings authored
commit 0baa57d8 upstream. Compile-tested only. Signed-off-by:
-
Jiri Benc authored
commit 9dc2ad10 upstream. vxlan_setup is called when allocating the net_device, i.e. way before vxlan_newlink (or vxlan_dev_configure) is called. This means vxlan->default_dst is actually unset in vxlan_setup and the condition that sets needed_headroom always takes the else branch. Set the needed_headrom at the point when we have the information about the address family available. Fixes: e4c7ed41 ("vxlan: add ipv6 support") Fixes: 2853af6a ("vxlan: use dev->needed_headroom instead of dev->hard_header_len") CC: Cong Wang <cwang@twopensource.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Nishanth Menon authored
commit a3b74709 upstream. When commit c4082d49 ("ARM: omap2+: board-generic: clean up the irq data from board file") cleaned up the direct usage of gic_of_init and omap_intc_of_init, it failed to clean up the macros properly. Since these macros are no longer used, lets just remove them. Fixes: c4082d49 ("ARM: omap2+: board-generic: clean up the irq data from board file") Reported-by:
Carlos Hernandez <ceh@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
David Howells authored
commit 911b79cd upstream. If request_key() is used to find a keyring, only do the search part - don't do the construction part if the keyring was not found by the search. We don't really want keyrings in the negative instantiated state since the rejected/negative instantiation error value in the payload is unioned with keyring metadata. Now the kernel gives an error: request_key("keyring", "#selinux,bdekeyring", "keyring", KEY_SPEC_USER_SESSION_KEYRING) = -1 EPERM (Operation not permitted) Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
commit f05819df upstream. The following sequence of commands: i=`keyctl add user a a @s` keyctl request2 keyring foo bar @t keyctl unlink $i @s tries to invoke an upcall to instantiate a keyring if one doesn't already exist by that name within the user's keyring set. However, if the upcall fails, the code sets keyring->type_data.reject_error to -ENOKEY or some other error code. When the key is garbage collected, the key destroy function is called unconditionally and keyring_destroy() uses list_empty() on keyring->type_data.link - which is in a union with reject_error. Subsequently, the kernel tries to unlink the keyring from the keyring names list - which oopses like this: BUG: unable to handle kernel paging request at 00000000ffffff8a IP: [<ffffffff8126e051>] keyring_destroy+0x3d/0x88 ... Workqueue: events key_garbage_collector ... RIP: 0010:[<ffffffff8126e051>] keyring_destroy+0x3d/0x88 RSP: 0018:ffff88003e2f3d30 EFLAGS: 00010203 RAX: 00000000ffffff82 RBX: ffff88003bf1a900 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000003bfc6901 RDI: ffffffff81a73a40 RBP: ffff88003e2f3d38 R08: 0000000000000152 R09: 0000000000000000 R10: ffff88003e2f3c18 R11: 000000000000865b R12: ffff88003bf1a900 R13: 0000000000000000 R14: ffff88003bf1a908 R15: ffff88003e2f4000 ... CR2: 00000000ffffff8a CR3: 000000003e3ec000 CR4: 00000000000006f0 ... Call Trace: [<ffffffff8126c756>] key_gc_unused_keys.constprop.1+0x5d/0x10f [<ffffffff8126ca71>] key_garbage_collector+0x1fa/0x351 [<ffffffff8105ec9b>] process_one_work+0x28e/0x547 [<ffffffff8105fd17>] worker_thread+0x26e/0x361 [<ffffffff8105faa9>] ? rescuer_thread+0x2a8/0x2a8 [<ffffffff810648ad>] kthread+0xf3/0xfb [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2 [<ffffffff815f2ccf>] ret_from_fork+0x3f/0x70 [<ffffffff810647ba>] ? kthread_create_on_node+0x1c2/0x1c2 Note the value in RAX. This is a 32-bit representation of -ENOKEY. The solution is to only call ->destroy() if the key was successfully instantiated. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
David Howells authored
commit 94c4554b upstream. There appears to be a race between: (1) key_gc_unused_keys() which frees key->security and then calls keyring_destroy() to unlink the name from the name list (2) find_keyring_by_name() which calls key_permission(), thus accessing key->security, on a key before checking to see whether the key usage is 0 (ie. the key is dead and might be cleaned up). Fix this by calling ->destroy() before cleaning up the core key data - including key->security. Reported-by:
Petr Matousek <pmatouse@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
commit 294ab783 upstream. It looks like the Kconfig check that was meant to fix this (commit fe9233fb [SCSI] scsi_dh: fix kconfig related build errors) was actually reversed, but no-one noticed until the new set of patches which separated DM and SCSI_DH). Fixes: fe9233fbSigned-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Daniel Borkmann authored
commit 6bb0fef4 upstream. When netlink mmap on receive side is the consumer of nf queue data, it can happen that in some edge cases, we write skb shared info into the user space mmap buffer: Assume a possible rx ring frame size of only 4096, and the network skb, which is being zero-copied into the netlink skb, contains page frags with an overall skb->len larger than the linear part of the netlink skb. skb_zerocopy(), which is generic and thus not aware of the fact that shared info cannot be accessed for such skbs then tries to write and fill frags, thus leaking kernel data/pointers and in some corner cases possibly writing out of bounds of the mmap area (when filling the last slot in the ring buffer this way). I.e. the ring buffer slot is then of status NL_MMAP_STATUS_VALID, has an advertised length larger than 4096, where the linear part is visible at the slot beginning, and the leaked sizeof(struct skb_shared_info) has been written to the beginning of the next slot (also corrupting the struct nl_mmap_hdr slot header incl. status etc), since skb->end points to skb->data + ring->frame_size - NL_MMAP_HDRLEN. The fix adds and lets __netlink_alloc_skb() take the actual needed linear room for the network skb + meta data into account. It's completely irrelevant for non-mmaped netlink sockets, but in case mmap sockets are used, it can be decided whether the available skb_tailroom() is really large enough for the buffer, or whether it needs to internally fallback to a normal alloc_skb(). >From nf queue side, the information whether the destination port is an mmap RX ring is not really available without extra port-to-socket lookup, thus it can only be determined in lower layers i.e. when __netlink_alloc_skb() is called that checks internally for this. I chose to add the extra ldiff parameter as mmap will then still work: We have data_len and hlen in nfqnl_build_packet_message(), data_len is the full length (capped at queue->copy_range) for skb_zerocopy() and hlen some possible part of data_len that needs to be copied; the rem_len variable indicates the needed remaining linear mmap space. The only other workaround in nf queue internally would be after allocation time by f.e. cap'ing the data_len to the skb_tailroom() iff we deal with an mmap skb, but that would 1) expose the fact that we use a mmap skb to upper layers, and 2) trim the skb where we otherwise could just have moved the full skb into the normal receive queue. After the patch, in my test case the ring slot doesn't fit and therefore shows NL_MMAP_STATUS_COPY, where a full skb carries all the data and thus needs to be picked up via recv(). Fixes: 3ab1f683 ("nfnetlink: add support for memory mapped netlink") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Daniel Borkmann authored
commit 592867bf upstream. We may already have gotten a proper fd struct through fdget(), so whenever we return at the end of an map operation, we need to call fdput(). However, each map operation from syscall side first probes CHECK_ATTR() to verify that unused fields in the bpf_attr union are zero. In case of malformed input, we return with error, but the lookup to the map_fd was already performed at that time, so that we return without an corresponding fdput(). Fix it by performing an fdget() only right before bpf_map_get(). The fdget() invocation on maps in the verifier is not affected. Fixes: db20fd2b ("bpf: add lookup/update/delete/iterate methods to BPF maps") Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Eric Dumazet authored
commit c8219906 upstream. In commit f341861f ("task_work: add a scheduling point in task_work_run()") I fixed a latency problem adding a cond_resched() call. Later, commit ac3d0da8 added yet another loop to reverse a list, bringing back the latency spike : I've seen in some cases this loop taking 275 ms, if for example a process with 2,000,000 files is killed. We could add yet another cond_resched() in the reverse loop, or we can simply remove the reversal, as I do not think anything would depend on order of task_work_add() submitted works. Fixes: ac3d0da8 ("task_work: Make task_work_add() lockless") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Maciej Żenczykowski <maze@google.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Axel Lin authored
commit 2c3f4b97 upstream. All the callers assume devm_spear_pcm_platform_register is a devm_ API, so use devm_snd_dmaengine_pcm_register in devm_spear_pcm_platform_register. Fixes: e1771bcf ("ASoC: SPEAr: remove custom DMA alloc compat function") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Scott Feldman authored
commit eb4cb851 upstream. .maxtype should match .policy. Probably just been getting lucky here because IFLA_BRPORT_MAX > IFLA_BR_MAX. Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink") Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit 6cc8e6d4 upstream. We are currently doing a full PHY initialization and even starting the pHY state machine during bcmgenet_mii_init() which is executed in the driver's probe function. This is convenient to determine whether we can attach to a proper PHY device but comes at the expense of spending up to 10ms per MDIO transactions (to reach the waitqueue timeout), which slows things down. This also creates a sitaution where we end-up attaching twice to the PHY, which is not quite correct either. Fix this by moving bcmgenet_mii_probe() into bcmgenet_open() and update its error path accordingly. Avoid printing the message "attached PHY at address 1 [...]" every time we bring up/down the interface and remove this print since it duplicates what the PHY driver already does for us. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit 978ffac4 upstream. bcmgenet_open()'s error path call free_irq() with a dev_id argument different from the one we used to call request_irq() with, this will make us trip over the warning in kernel/irq/manage.c:__free_irq() Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Grygorii Strashko authored
commit 6417049f upstream. On DRA7 there is one pinctrl domain (dra7_pmx_core) and PRCM wake-up IRQ is not shared, so remove quirk. Cc: Nishanth Menon <nm@ti.com> Fixes: 31320bea ('pinctrl: single: Add DRA7 pinctrl compatibility') Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 04 Jan, 2016 4 commits
-
-
Christophe Lombard authored
commit 4108efb0 upstream. The scheduled process area is currently allocated before assigning the correct maximum processes to the AFU, which will mean we only ever allocate a fixed number of pages for the scheduled process area. This will limit us to 958 processes with 2 x 64K pages. If we try to use more processes than that we'd probably overrun the buffer and corrupt memory or crash. AFUs that require three or more interrupts per process will not be affected as they are already limited to less processes than that, but we could hit it on an AFU that requires 0, 1 or 2 interrupts per process, or when using 4K pages. This patch moves the initialisation of the num_procs to before the SPA allocation so that enough pages will be allocated for the number of processes that the AFU supports. Signed-off-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [ kamal: backport to 4.2-stable: context ] Signed-off-by:
-
Maxim Sheviakov authored
commit 515c752d upstream. There was a typo in the original. bug: https://bugs.freedesktop.org/show_bug.cgi?id=92865Signed-off-by:
Maxim Sheviakov <mrader3940@yandex.ru> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 2b02ec79 upstream. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92260Signed-off-by:
-
Maxim Sheviakov authored
commit e7865479 upstream. Just adds the quirk for MSI R7 370 Armor 2X Bug: https://bugs.freedesktop.org/show_bug.cgi?id=91294Signed-off-by:
-
