Fix __devinit and __devexit issues with sound drivers.
Resolves MODPOST warnings similar to:
WARNING: sound/drivers/snd-dummy.o - Section mismatch: reference to .init.text:snd_dummy_probe from .data.rel.local between 'snd_dummy_driver' (at offset 0x0) and 'snd_dummy_controls'
WARNING: sound/drivers/snd-mtpav.o - Section mismatch: reference to .init.text:snd_mtpav_probe from .data.rel.local between 'snd_mtpav_driver' (at offset 0x0) and 'snd_mtpav_input'
WARNING: sound/drivers/snd-virmidi.o - Section mismatch: reference to .init.text:snd_virmidi_probe from .data.rel.local after 'snd_virmidi_driver' (at offset 0x0)
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Fix LFE controls for Dell Inspiron E1705/9400 and XPS M1710 laptops.
Signed-off-by: Mikael Nilsson <mikael@nilsson.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Renamed Conexant 5045 to CX20549 (Venice) per Conexant Documentation
Renamed Conexant 5047 to CX20551 (Waikiki) per Conexant Documentation
Fixed automute on HP Laptops with CX20551 codec.
Fixed recording issues on Toshiba Satelite P100/P105 series laptops
Added HP DV8000, DV2000Z, Fujitsu Si1520 support
More work to be done on CX20549 based systems, but CX20551 Systems are
much better now.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Add support for the PCM interfaces of the Edirol PCR-A.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

fix a typo
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Recent changes in usbcore removed the bandwidth field from struct urb.
Remove the occurence in usbaudio.c
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Fixed the silent output problem on laptops with Conexant Cx20551 codec
chip, such as Packard-bell EasyNote A* series.
The information was taken from ALSA bug#1134.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

When a device is unkown, the driver tries to set up the codec based on
the BIOS information.  Then it may result in Oops if BIOS is broken.
The patch fixes the issue, falling back to a reference model in such a
case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Always fill MTTs from CPU
  IB/mthca: Merge MR and FMR space on 64-bit systems
  IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs
  IB/mthca: Give reserved MTTs a separate cache line
  IB/mthca: Fix reserved MTTs calculation on mem-free HCAs
  RDMA/cxgb3: Add driver for Chelsio T3 RNIC
  IB: Remove redundant "_wq" from workqueue names
  RDMA/cma: Increment port number after close to avoid re-use
  IB/ehca: Fix memleak on module unloading
  IB/mthca: Work around gcc bug on sparc64
  IPoIB: Connected mode experimental support
  IB/core: Use ARRAY_SIZE macro for mandatory_table
  IB/mthca: Use correct structure size in call to memset()

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] on reconnect to Samba - reset the unix capabilities
  [CIFS] Allow update of EOF on remote extend of file
  [CIFS] POSIX CIFS Extensions (continued) - POSIX Open
  [CIFS] Additional POSIX CIFS Extensions infolevels

After temporary server or network failure and reconneciton, we were not
resending the unix capabilities via SetFSInfo - which confused Samba posix
byte range locking code.

Discovered by jra
Signed-off-by: Steve French <sfrench@us.ibm.com>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPSEC]: Fix the address family to refer encap_family
  [IPSEC]: changing API of xfrm6_tunnel_register
  [IPSEC]: make sit use the xfrm4_tunnel_register
  [IPSEC]: Changing API of xfrm4_tunnel_register.
  [TCP]: Prevent pseudo garbage in SYN's advertized window
  [NET_SCHED]: sch_hfsc: replace ASSERT macro by WARN_ON
  [BRIDGE] br_if: Fix oops in port_carrier_check
  [NETFILTER]: Clear GSO bits for TCP reset packet
  [TG3]: Update copyright, version, and reldate.
  [TG3]: Add some tx timeout debug messages.
  [TG3]: Use constant for PHY register 0x1e.
  [TG3]: Power down 5704 serdes transceiver when shutting down.
  [TG3]: 5906 doesn't need to switch to slower clock.
  [TG3]: 5722/5756 don't need PHY jitter workaround.
  [TG3]: Use lower DMA watermark for 5703.
  [TG3]: Save MSI state before suspend.
  [XFRM]: Fix IPv4 tunnel mode decapsulation with IPV6=n
  [IPV6] HASHTABLES: Use appropriate seed for caluculating ehash index.

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits)
  [POWERPC] Use udbg_early_init() on ppc32
  [POWERPC] Open Firmware serial port driver
  [POWERPC] Move MPIC smp routines into mpic.c
  [POWERPC] Cleanup pseries kexec code
  [POWERPC] Cleanup pseries smp initialisation code
  [POWERPC] Consolidate pseries platform header files into pseries.h
  [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
  [POWERPC] cell: pm_rtas_activat_signals routine cleanup
  [POWERPC] cell: PPU Oprofile cleanup patch
  [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
  [POWERPC] spu sched: static timeslicing for SCHED_RR contexts
  [POWERPC] spu sched: use DECLARE_BITMAP
  [POWERPC] spu sched: forced preemption at execution
  [POWERPC] spu sched: update some comments
  [POWERPC] spu sched: simplity spu_remove_from_active_list
  [POWERPC] spufs: optimize spu_run
  [POWERPC] spufs: runqueue simplification
  [POWERPC] spufs: move prio to spu_context
  [POWERPC] spufs: state_mutex cleanup
  [POWERPC] spufs: simplify state_mutex
  ...

udbg_early_init() is a function used on 64 bit systems, which
initializes whichever early udbg backend is configured.  This function
is not called on 32-bit, however if btext early debug is enabled it
does have an explicit, inline, #ifdef-ed assignment performing
analagous initialization.

This patch makes things more uniform by folding the btext
initialization as an option into udbg_early_init() and calling that
from the 32-bit setup path.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.

In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Move a couple of MPIC smp routines into mpic.c, they're inside an SMP
block in mpic.c - so they're still only built for SMP.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Move all the pseries kexec code into one file, platforms/pseries/kexec.c
Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't
have to have #ifdef CONFIG_KEXEC in setup.c

Move the initialisation of the ppc_md kexec callbacks into an init routine.
This is well and truly early enough to cause no change in behaviour, we
can't kexec until userspace has given us a kernel to kexec into.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Move some extern declarations from setup.c into the new pseries.h.
While we're at it, provide dummy implementations for !SMP, to avoid
cluttering the C file with more #ifdefs.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Following the example of platforms/pasemi, consolidate a couple of
tiny header files in platforms/pseries into pseries.h.

This gives us a convenient place to put things that need to be
available to the platform code, but not public. And hopefully will
help people resist the temptation of sticking externs in C files.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Stop using i2c_adapter.class_dev
  i2c: Remove the warning on missing adapter device
  i2c: Declare more i2c_adapter parent devices
  i2c: PA Semi SMBus driver
  i2c-amd8111: Proposed cleanups
  i2c-parport: Add support for One For All remote JP1 interface
  i2c-viapro: Add support for the VIA CX700 south bridge
  i2c: Add IDs to adapters
  i2c: Update the list of bus IDs
  i2c: Add driver suspend/resume/shutdown support
  i2c: completion header cleanups
  i2c-i801: Document the SMBus unhiding quirk
  i2c-i801: Spelling fix
  i2c: Fix typo in SMBus Write Word Data description
  i2c-piix4: Add support for the ATI SB600
  i2c-nforce2: Drop unused reference to pci_dev
  i2c/vt8231: Remove superfluous initialization
  i2c-ali1563: Fix device initialization
  i2c-ali1563: Improve the status messages

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
  [MIPS] Fix uniprocessor Sibyte builds.
  [MIPS] Make entry.S a little more readable.
  [MIPS] Remove stray instruction from __get_user_asm_ll32.
  [MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.
  [MIPS] DECstation: Fix irq handling
  [MIPS] signals: make common _BLOCKABLE macro
  [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
  [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
  [MIPS] signal: Fix warnings in o32 compat code.
  [MIPS] IP27: Enable N32 support in defconfig.
  Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."
  [MIPS] Don't claim we support dma_declare_coherent_memory - we don't.
  [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
  [MIPS] Improve branch prediction in ll/sc atomic operations.

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (23 commits)
  [WATCHDOG] timers cleanup
  [WATCHDOG] ib700wdt.c - convert to platform_device part 2
  [WATCHDOG] ib700wdt.c - convert to platform_device
  [WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes
  [WATCHDOG] ib700wdt.c small clean-up's
  [WATCHDOG] ib700wdt.c clean-up init and exit routines
  [WATCHDOG] ib700_wdt.c stop + set_heartbeat operations
  [WATCHDOG] show default value for nowayout in module parameter
  [WATCHDOG] advantechwdt.c - convert to platform_device part 2
  [WATCHDOG] advantechwdt.c - convert to platform_device
  [WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function
  [WATCHDOG] advantechwdt.c - cleanup before platform_device patches
  [WATCHDOG] acquirewdt.c - convert to platform_device part 2
  [WATCHDOG] acquirewdt.c - convert to platform_device
  [WATCHDOG] acquirewdt.c - clean before platform_device patches
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd.c - e-mail adres update
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd_usb.c - document includes
  [WATCHDOG] pcwd_pci.c - spinlock fixes
  ...

Somewhere in the rewrite of the work queues my cleanup of SAK handling
got broken.  Maybe I didn't retest it properly or possibly the API
was changing so fast I missed something.  Regardless currently
triggering a SAK now generates an ugly BUG_ON and kills the kernel.

Thanks to Alexey Dobriyan <adobriyan@openvz.org> for spotting this.

This modifies the use of SAK_work to initialize it when the data
structure it resides in is initialized, and to simply call
schedule_work when we need to generate a SAK.  I update both
data structures that have a SAK_work member for consistency.

All of the old PREPARE_WORK calls that are now gone.

If we call schedule_work again before it has processed it
has generated the first SAK it will simply ignore the duplicate
schedule_work request.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Andrew Sharp <tigerand@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When CONFIG_PREEMPT is not set, it also moves one branch instruction from
ret_from_irq() to ret_from_exception().  Therefore we favour the return
from irq case which should be more common than the other one.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This did result in double clearing of the error return value on success
only but should make a meassurable overhead for sigreturn.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When I post a patch (commit f431baa5),
I just tried to not change behavior of existing codes, but it seems
dec/int-handler.S had been broken since its previous commit
937a8015.

The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so
dec's plat_irq_dispatch should not do it, and there is no need to
adjust RA.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This reverts commit 4ed3a77f.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Platforms will now have to supply a function dma_device_is_coherent which
returns if a particular device participates in the coherence domain.  For
most platforms this function will always return 0 or 1.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Now that finally all supported versions of binutils have functioning
support for .subsection use .subsection to tweak the branch prediction

I did not modify the R10000 errata variants because it seems unclear if
this will invalidate the workaround which actually relies on the cheesy
prediction of branch likely to cause a misspredict if the sc was
successful.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>