- 12 Apr, 2017 14 commits
-
-
Benjamin Herrenschmidt authored
We test for aspeed chips to handle a couple of special cases, but we do that by checking the machine type which isn't right. Instead check the actual device compatible property. This also updates the dtsi files for the aspeed SoC to match. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Benjamin Herrenschmidt authored
The documentation describes NETIF_F_IP_CSUM as deprecated so let's switch to NETIF_F_HW_CSUM and use the helper to handle unhandled protocols. Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== net/smc: patches for net-next here are some patches for net/smc. Most important are improvements for socket closing. ==================== Signed-off-by: -
Ursula Braun authored
smc specifies IB_SEND_INLINE for IB_WR_SEND ib_post_send calls, but provides a mapped buffer to be sent. This is inconsistent, since IB_SEND_INLINE works without mapped buffer. Problem has not been detected in the past, because tests had been limited to Connect X3 cards from Mellanox, whose mlx4 driver just ignored the IB_SEND_INLINE flag. For now, the IB_SEND_INLINE flag is removed. Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
-
Ursula Braun authored
Make sure sockets never accepted are removed cleanly. Signed-off-by:
-
Ursula Braun authored
unhash is already called in sock_put_work. Remove the second call. Signed-off-by:
-
Ursula Braun authored
State SMC_CLOSED should be reached only, if ConnClosed has been sent to the peer. If ConnClosed is received from the peer, a socket with shutdown SHUT_WR done, switches errorneously to state SMC_CLOSED, which means the peer socket is dangling. The local SMC socket is supposed to switch to state APPFINCLOSEWAIT to make sure smc_close_final() is called during socket close. Signed-off-by:
-
Ursula Braun authored
Several state changes occur during SMC socket closing. Currently state changes triggered locally occur in process context with lock_sock() taken while state changes triggered by peer occur in tasklet context with bh_lock_sock() taken. bh_lock_sock() does not wait till a lock_sock(() task in process context is finished. This may lead to races in socket state transitions resulting in dangling SMC-sockets, or it may lead to duplicate SMC socket freeing. This patch introduces a closing worker to run all state changes under lock_sock(). Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Ursula Braun authored
Wake up reading file descriptors for a closing socket as well, otherwise some socket applications may stall. Signed-off-by:
-
Ursula Braun authored
If peer indicates write_blocked, the cursor state of the received data should be send to the peer immediately (in smc_tx_consumer_update()). Afterwards the write_blocked indicator is cleared. If there is no free slot for another write request, sending is postponed to worker smc_tx_work, and the write_blocked indicator is not cleared. Therefore another clearing check is needed in smc_tx_work(). Signed-off-by:
-
Ursula Braun authored
SMC requires an active ib port on the RoCE device. smc_pnet_find_roce_resource() determines the matching RoCE device port according to the configured PNET table. Do not return the found RoCE device port, if it is not flagged active. Signed-off-by:
-
Ursula Braun authored
The global event handler is created only, if the ib_device has already been used by at least one link group. It is guaranteed that there exists the corresponding entry in the smc_ib_devices list. Get rid of this superfluous check. Signed-off-by:
-
Ursula Braun authored
This patch removes an outdated comment. Signed-off-by:
-
Joao Pinto authored
In the submission of the lastest multiple buffer patch set, this fix was lost. I am sending this patch to put it right again. The fix was originally proposed by Arnd Bergmann. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
- 11 Apr, 2017 26 commits
-
-
Willem de Bruijn authored
BPF helper functions access socket fields through skb->sk. This is not set in ingress cgroup and socket filters. The association is only made in skb_set_owner_r once the filter has accepted the packet. Sk is available as socket lookup has taken place. Temporarily set skb->sk to sk in these cases. Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Wei Yongjun authored
Fix the return value check which testing the wrong variable in devlink_dpipe_header_put(). Fixes: 1555d204 ("devlink: Support for pipeline debug (dpipe)") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== more s390/net updates here's a second batch of s390/net patches for net-next. A mixed bunch of qeth cleanups, and a few patches to add support for ETHTOOL_GLINKSETTINGS. ==================== Signed-off-by: -
Julian Wiedmann authored
prepare() and complete() are not implemented by any discipline, so just drop all the indirection. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by:
Hans Wippel <hwippel@linux.vnet.ibm.com> Reviewed-by:
-
Julian Wiedmann authored
LINK_MODE_* replaces the u32-limited SUPPORTED_* / ENABLED_* definitions. Signed-off-by:
-
Julian Wiedmann authored
get_settings() is deprecated and lacks support for higher link speeds, so implement get_link_ksettings() instead. Signed-off-by:
-
Julian Wiedmann authored
In preparation for moving to get_link_ksettings(), clean up how we build the supported and advertised port/speed masks. Signed-off-by:
-
Julian Wiedmann authored
1. a buffer has 16 is_header flags, because that's its # of elements 2. replace the last occurrence of QETH_HEADER_SIZE, and remove it Signed-off-by:
-
Julian Wiedmann authored
ndo_start_xmit() expects us to return netdev_tx_t here... Signed-off-by:
-
Julian Wiedmann authored
'elements_needed' is not used in qeth_do_send_packet_fast(), so consequently remove it. Signed-off-by:
-
Julian Wiedmann authored
Duplicated code. Signed-off-by:
-
Julian Wiedmann authored
Identical code, we just need to call a layer-specific hook to process any received buffer. qeth_buffer_reclaim_work() is shuffled around to avoid a forward declaration for qeth_queue_input_buffer(). Signed-off-by:
-
Julian Wiedmann authored
There's a number of layer-independent ioctls that we can handle in core, and reduce code duplication. For layer-specific ioctls, add a do_ioctl() discipline hook. Signed-off-by:
-
Johannes Berg authored
There's no need to have struct bpf_map_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to the types header file added by the previous patch and include it in the same fashion. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Johannes Berg authored
There's no need to have struct bpf_prog_type_list since it just contains a list_head, the type, and the ops pointer. Since the types are densely packed and not actually dynamically registered, it's much easier and smaller to have an array of type->ops pointer. Also initialize this array statically to remove code needed to initialize it. In order to save duplicating the list, move it to a new header file and include it in the places needing it. Signed-off-by:
-
David S. Miller authored
Fugang Duan says: ==================== net: fec: driver code clean The patch series are for fec ethernet driver code clean up, each patch is independent. Patch #1,#4,#5 are code clean up. Patch #2,#3 are for aarch64 platform. Patch #6 is for i.MX6UL to add lost errata workaround. ==================== Signed-off-by: -
Fugang Duan authored
The errata ERR007885 HW fix don't add to i.MX6ul ENET IP version, so add sw workaroud for the chip. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Fugang Duan authored
Correct the errata number ERR006358 comment typo. Signed-off-by:
-
Fugang Duan authored
Many boards use i2c/spi expander gpio as phy-reset-gpios and these gpios maybe registered after fec port, driver should check the return value of .of_get_named_gpio(). Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
Fugang Duan authored
In aarch64 system, it requires to trasfer ->dev to dma_alloc_coherent() API, otherwise allocate failed and print kernel warning. Signed-off-by:
-
Fugang Duan authored
In aarch64 system, the BD pointer is 64bit, and the high-order 32-bits of the address is effective, so replace usigned with (void *) type to aovid 64bit address is casted to 32bit in .fec_enet_get_nextdesc() and .fec_enet_get_prevdesc() functions. Signed-off-by:
-
Fugang Duan authored
Add return value check after calling .of_property_read_u32() to avoid the warning reported by coverity. Signed-off-by:
-
David S. Miller authored
Guillaume Nault says: ==================== l2tp: drop l2tp_session_find() l2tp_netlink is the last user of l2tp_session_find(), but that call is useless. Let's remove it and drop l2tp_session_find() definitely. ==================== Signed-off-by: -
Guillaume Nault authored
This function isn't used anymore. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
There's no point in checking for duplicate sessions at the beginning of l2tp_nl_cmd_session_create(); the ->session_create() callbacks already return -EEXIST when the session already exists. Furthermore, even if l2tp_session_find() returns NULL, a new session might be created right after the test. So relying on ->session_create() to avoid duplicate session is the only sane behaviour. Signed-off-by:
-
David S. Miller authored
Christoph Hellwig says: ==================== remove pci_enable_msix() V3 this series removes the remaining callers of the pci_enable_msix() function and then the function itself. The final removal has been Acked by Bjorn. Changes since V2: - add another patch on Dave's request - add various acks - spelling fixes in the commit logs Changes since V1: - replace the two previous thunderx patches with a new one from Thanneeru ==================== Signed-off-by:
-
