- 10 Nov, 2014 3 commits
-
-
Geert Uytterhoeven authored
Add support for r8a73a4 (R-Mobile APE6) and sh73a0 (SH-Mobile AG5). On these SoCs, the operating clock runs faster that on previous SoCs, and the internal SCL clock counter gets incremented every 2 clocks of the operating clock, just like on R-Car Gen2. Cfr. the "/2" in the calculation of ICCL/ICCH in section "I2C Bus Interface (IIC)", subsection "Transfer Rate" of the datasheets. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Geert Uytterhoeven authored
Explicitly list the various SoC-specific compatible properties. This allows checkpatch to validate DTSes. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Fabio Estevam authored
According to Documentation/CodingStyle - Chapter 14: "The preferred form for passing a size of a struct is the following: p = kmalloc(sizeof(*p), ...); The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed to a memory allocator is not." So do it as recommeded. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
- 09 Nov, 2014 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - enable bpf syscall for compat - cpu_suspend fix when checking the idle state type - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: update defconfig for 3.18 arm64: compat: Enable bpf syscall arm64: psci: fix cpu_suspend to check idle state type for index
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Another quiet week: - a fix to silence edma probe error on non-supported platforms from Arnd - a fix to enable the PL clock for Parallella, to make mainline usable with the SDK. - a somewhat verbose fix for the PLL clock tree on VF610 - enabling of SD/MMC on one of the VF610-based boards (for testing) - a fix for i.MX where CONFIG_SPI used to be implicitly enabled and now needs to be added to the defconfig instead - another maintainer added for bcm2835: Lee Jones" * tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: zynq: Enable PL clocks for Parallella dma: edma: move device registration to platform code ARM: dts: vf610: add SD node to cosmic dts MAINTAINERS: update bcm2835 entry ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linuxLinus Torvalds authored
Pull devicetree bugfix from Grant Likely: "One buffer overflow bug that shouldn't be left around" * 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of: Fix overflow bug in string property parsing functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fix from Chris Mason: "It's a one liner for an error cleanup path that leads to crashes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
-
Linus Torvalds authored
Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are 3 tiny fixes for 3.18-rc4. One fixes up a long-stading race condition in the driver core for removing directories in /sys/devices/virtual/ and the other 2 fix up the wording of a new Kconfig option that was added in 3.18-rc1" * tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP sysfs: driver core: Fix glue dir race condition by gdp_mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some staging/iio fixes for 3.18-rc4. Nothing major, just a few bugfixes of things that have been reported" * tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging:iio:ade7758: Remove "raw" from channel name staging:iio:ade7758: Fix check if channels are enabled in prenable staging:iio:ade7758: Fix NULL pointer deref when enabling buffer iio: as3935: allocate correct iio_device size io: accel: kxcjk-1013: Fix iio_event_spec direction iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined iio: adc: mxs-lradc: Disable the clock on probe failure iio: st_sensors: Fix buffer copy staging:iio:ad5933: Drop "raw" from channel names staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some reported issues" * tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix pty master poll() after slave closes v2 serial: of-serial: fix uninitialized kmalloc variable tty/vt: don't set font mappings on vc not supporting this tty: serial: 8250_mtk: Fix quot calculation tty: Prevent "read/write wait queue active!" log flooding tty: Fix high cpu load if tty is unreleaseable serial: Fix divide-by-zero fault in uart_get_divisor()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB fixes for 3.18-rc4. Just a bunch of little fixes resolving reported issues and new device ids for existing drivers. Full details are in the shortlog" * tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: Update default usb-storage delay_use value in kernel-parameters.txt USB: cdc-acm: add quirk for control-line state requests phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init() USB: cdc-acm: only raise DTR on transitions from B0 Revert "storage: Replace magic number with define in usb_stor_euscsi_init()" usb: core: notify disconnection when core detects disconnect usb: core: need to call usb_phy_notify_connect after device setup uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models xhci: no switching back on non-ULT Haswell USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen USB: quirks: enable device-qualifier quirk for another Elan touchscreen MAINTAINERS: Remove duplicate entry for usbip driver usb: storage: fix build warnings !CONFIG_PM usb: Remove references to non-existent PLAT_S5P symbol uas: Add NO_ATA_1X for VIA VL711 devices xhci: Disable streams on Asmedia 1042 xhci controllers USB: HWA: fix a warning message uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model usb-storage: handle a skipped data phase ...
-
Andreas Färber authored
The Parallella board comes with a U-Boot bootloader that loads one of two predefined FPGA bitstreams before booting the kernel. Both define an AXI interface to the on-board Epiphany processor. Enable clocks FCLK0..FCLK3 for the Programmable Logic by default. Otherwise accessing, e.g., the ESYSRESET register freezes the board, as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem. Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by:
Andreas Färber <afaerber@suse.de> Acked-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 08 Nov, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c bugfixes from Wolfram Sang: "One bigger cleanup (FSF address removal) and two bugfixes for I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Two fixlets for the armada SoC interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: armada-370-xp: Fix MPIC interrupt handling irqchip: armada-370-xp: Fix MSI interrupt handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For: - some regression fixes at the Remote Controller core and imon driver - a build fix for certain randconfigs with ir-hix5hd2 - don't feed power to satellite system at ds3000 driver init It also contains some fixes for drivers added for Kernel 3.18: - some fixes at the new ISDB-S driver, and the corresponding bits to fix some descriptors for this Japanese TV standard at the DVB core - two warning cleanups for sp2 driver if PM is disabled - change the default mode for the new vivid driver" * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] sp2: sp2_init() can be static [media] dvb:tc90522: fix always-false expression [media] dvb-core: set default properties of ISDB-S [media] dvb:tc90522: fix stats report [media] vivid: default to single planar device instances [media] imon: fix other RC type protocol support [media] ir-hix5hd2 fix build warning [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding [media] rc-core: fix protocol_change regression in ir_raw_event_register
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This weeks' round of MIPS bug fixes for 3.18: - wire up the bpf syscall - fix TLB dump output for R3000 class TLBs - fix strnlen_user return value if no NUL character was found. - fix build with binutils 2.24.51+. While there is no binutils 2.25 release yet, toolchains derived from binutils 2.24.51+ are already in common use. - the Octeon GPIO code forgot to offline GPIO IRQs. - fix build error for XLP. - fix possible BUG assertion with EVA for CMA" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix build with binutils 2.24.51+ MIPS: R3000: Fix debug output for Virtual page number MIPS: Fix strnlen_user() return value in case of overlong strings. MIPS: CMA: Do not reserve memory if not required MIPS: Wire up bpf syscall. MIPS/Xlp: Remove the dead function destroy_irq() to fix build error MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
-
- 07 Nov, 2014 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfsLinus Torvalds authored
Pull xfs fixes from Dave Chinner: "This update fixes a warning in the new pagecache_isize_extended() and updates some related comments, another fix for zero-range misbehaviour, and an unforntuately large set of fixes for regressions in the bulkstat code. The bulkstat fixes are large but necessary. I wouldn't normally push such a rework for a -rcX update, but right now xfsdump can silently create incomplete dumps on 3.17 and it's possible that even xfsrestore won't notice that the dumps were incomplete. Hence we need to get this update into 3.17-stable kernels ASAP. In more detail, the refactoring work I committed in 3.17 has exposed a major hole in our QA coverage. With both xfsdump (the major user of bulkstat) and xfsrestore silently ignoring missing files in the dump/restore process, incomplete dumps were going unnoticed if they were being triggered. Many of the dump/restore filesets were so small that they didn't evenhave a chance of triggering the loop iteration bugs we introduced in 3.17, so we didn't exercise the code sufficiently, either. We have already taken steps to improve QA coverage in xfstests to avoid this happening again, and I've done a lot of manual verification of dump/restore on very large data sets (tens of millions of inodes) of the past week to verify this patch set results in bulkstat behaving the same way as it does on 3.16. Unfortunately, the fixes are not exactly simple - in tracking down the problem historic API warts were discovered (e.g xfsdump has been working around a 20 year old bug in the bulkstat API for the past 10 years) and so that complicated the process of diagnosing and fixing the problems. i.e. we had to fix bugs in the code as well as discover and re-introduce the userspace visible API bugs that we unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly. Summary: - incorrect warnings about i_mutex locking in pagecache_isize_extended() and updates comments to match expected locking - another zero-range bug fix for stray file size updates - a bunch of fixes for regression in the bulkstat code introduced in 3.17" * tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() xfs: rework zero range to prevent invalid i_size updates mm: Remove false WARN_ON from pagecache_isize_extended() xfs: Check error during inode btree iteration in xfs_bulkstat() xfs: bulkstat doesn't release AGI buffer on error
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "More changes than I'd like here, most of them for a single bug repeated in a bunch of drivers with data not being initialized correctly, plus a fix to lower the severity of a warning introduced in the last merge window which can legitimately go off so we don't want to alarm users excessively" * tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mpa01: zero-initialize regulator match table array regulator: max8660: zero-initialize regulator match table array regulator: max77802: zero-initialize regulator match table regulator: max77686: zero-initialize regulator match table regulator: max1586: zero-initialize regulator match table array regulator: max77693: Fix use of uninitialized regulator config regulator: of: Lower the severity of the error with no container
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi bugfixes from Mark Brown: "A couple of small driver fixes for v3.18, both quite problematic if you hit a use case that's affected" * tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM spi: fsl-dspi: Fix CTAR selection
-
Johannes Berg authored
The ENABLE_DEV_COREDUMP option is misleading as it implies that it gets the framework enabled, this isn't true it just allows it to get enabled if a driver needs it. Rename it to ALLOW_DEV_COREDUMP to better capture its semantics. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Acked-by:
Aristeu Rozanski <aris@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aristeu Rozanski authored
It's desirable for allnconfig and tinyconfig targets to result in the least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to switch off DEV_COREDUMP regardless if any drivers select WANT_DEV_COREDUMP. This patch renames the option to ENABLE_DEV_COREDUMP and setting it to 'n' (as in allnconfig or tinyconfig) will effectively disable device coredump. Cc: Josh Triplett <josh@joshtriplett.org> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
Aristeu Rozanski <arozansk@redhat.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laurent Pinchart authored
Clients instantiated from OF get an IRQ mapping created at device registration time. Dispose the mapping when the client is removed. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
Wolfram Sang authored
iowait is for blkio [1]. I2C shouldn't use it. [1] https://lkml.org/lkml/2014/11/3/317Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable@kernel.org
-
Wolfram Sang authored
We have a central copy of the GPL for that. Some addresses were already outdated. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com>
-
Mark Knibbs authored
Back in 2010 the default usb-storage delay_use time was reduced from 5 to 1 second (commit a4a47bc0), but kernel-parameters.txt wasn't updated to reflect that. Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yijing Wang authored
There is a race condition when removing glue directory. It can be reproduced in following test: path 1: Add first child device device_add() get_device_parent() /*find parent from glue_dirs.list*/ list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) if (k->parent == parent_kobj) { kobj = kobject_get(k); break; } .... class_dir_create_and_add() path2: Remove last child device under glue dir device_del() cleanup_device_parent() cleanup_glue_dir() kobject_put(glue_dir); If path2 has been called cleanup_glue_dir(), but not call kobject_put(glue_dir), the glue dir is still in parent's kset list. Meanwhile, path1 find the glue dir from the glue_dirs.list. Path2 may release glue dir before path1 call kobject_get(). So kernel will report the warning and bug_on. This is a "classic" problem we have of a kref in a list that can be found while the last instance could be removed at the same time. This patch reuse gdp_mutex to fix this race condition. The following calltrace is captured in kernel 3.4, but the latest kernel still has this bug. ----------------------------------------------------- <4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40() <4>[ 3965.441474] Hardware name: Romley <4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)... ... <4>[ 3965.441605] Call Trace: <4>[ 3965.441611] [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0 <4>[ 3965.441615] [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20 <4>[ 3965.441618] [<ffffffff81215963>] kobject_get+0x33/0x40 <4>[ 3965.441624] [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0 <4>[ 3965.441627] [<ffffffff812d22d4>] device_add+0xd4/0x6d0 <4>[ 3965.441631] [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40 .... <2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65! <4>[ 3965.441915] invalid opcode: 0000 [#1] SMP ... <4>[ 3965.686743] [<ffffffff811a677e>] sysfs_create_group+0xe/0x10 <4>[ 3965.686748] [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20 <4>[ 3965.686753] [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120 <4>[ 3965.686756] [<ffffffff812030bc>] add_disk+0x1cc/0x490 .... ------------------------------------------------------- Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
Weng Meiling <wengmeiling.weng@huawei.com> Cc: <stable@vger.kernel.org> #3.4+ Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manuel Lauss authored
Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8355/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
- 06 Nov, 2014 12 commits
-
-
Dave Chinner authored
The bulkstat main loop progress is tracked by the "lastino" variable, which is a full 64 bit inode. However, the loop actually works on agno/agino pairs, and so there's a significant disconnect between the rest of the loop and the main cursor. Convert this to use the agino, and pass the agino into the chunk formatting function and convert it too. This gets rid of the inconsistency in the loop processing, and finally makes it simple for us to skip inodes at any point in the loop simply by incrementing the agino cursor. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
The error propagation is a horror - xfs_bulkstat() returns a rval variable which is only set if there are formatter errors. Any sort of btree walk error or corruption will cause the bulkstat walk to terminate but will not pass an error back to userspace. Worse is the fact that formatter errors will also be ignored if any inodes were correctly formatted into the user buffer. Hence bulkstat can fail badly yet still report success to userspace. This causes significant issues with xfsdump not dumping everything in the filesystem yet reporting success. It's not until a restore fails that there is any indication that the dump was bad and tha bulkstat failed. This patch now triggers xfsdump to fail with bulkstat errors rather than silently missing files in the dump. This now causes bulkstat to fail when the lastino cookie does not fall inside an existing inode chunk. The pre-3.17 code tolerated that error by allowing the code to move to the next inode chunk as the agino target is guaranteed to fall into the next btree record. With the fixes up to this point in the series, xfsdump now passes on the troublesome filesystem image that exposes all these bugs. cc: <stable@vger.kernel.org> Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com>
-
Dave Chinner authored
There are a bunch of variables tha tare more wildy scoped than they need to be, obfuscated user buffer checks and tortured "next inode" tracking. This all needs cleaning up to expose the real issues that need fixing. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
The loop construct has issues: - clustidx is completely unused, so remove it. - the loop tries to be smart by terminating when the "freecount" tells it that all inodes are free. Just drop it as in most cases we have to scan all inodes in the chunk anyway. - move the "user buffer left" condition check to the only point where we consume space int eh user buffer. - move the initialisation of agino out of the loop, leaving just a simple loop control logic using the clusteridx. Also, double handling of the user buffer variables leads to problems tracking the current state - use the cursor variables directly rather than keeping local copies and then having to update the cursor before returning. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
The xfs_bulkstat_agichunk formatting cursor takes buffer values from the main loop and passes them via the structure to the chunk formatter, and the writes the changed values back into the main loop local variables. Unfortunately, this complex dance is full of corner cases that aren't handled correctly. The biggest problem is that it is double handling the information in both the main loop and the chunk formatting function, leading to inconsistent updates and endless loops where progress is not made. To fix this, push the struct xfs_bulkstat_agichunk outwards to be the primary holder of user buffer information. this removes the double handling in the main loop. Also, pass the last inode processed by the chunk formatter as a separate parameter as it purely an output variable and is not related to the user buffer consumption cursor. Finally, the chunk formatting code is not shared by anyone, so make it local to xfs_itable.c. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Dave Chinner authored
The bulkstat code has several different ways of detecting the end of an AG when doing a walk. They are not consistently detected, and the code that checks for the end of AG conditions is not consistently coded. Hence the are conditions where the walk code can get stuck in an endless loop making no progress and not triggering any termination conditions. Convert all the "tmp/i" status return codes from btree operations to a common name (stat) and apply end-of-ag detection to these operations consistently. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Jan Kara authored
XFS doesn't always hold i_mutex when calling truncate_setsize() and it uses a different lock to serialize truncates and writes. So fix the comment before truncate_setsize(). Reported-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Johan Hovold authored
Add new quirk for devices that cannot handle control-line state requests. Note that we currently send these requests to all devices, regardless of whether they claim to support it, but that errors are only logged if support is claimed. Since commit 0943d8ea ("USB: cdc-acm: use tty-port dtr_rts"), which only changed the timings for these requests slightly, this has been reported to cause occasional firmware crashes on Simtec Electronics Entropy Key devices after re-enumeration. Enable the quirk for this device. Reported-by:
Nix <nix@esperi.org.uk> Tested-by:
Nix <nix@esperi.org.uk> Cc: stable <stable@vger.kernel.org> # v3.16 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.18-rc4 A single fix this for dwc2 this time. Because of excessive debugging messages, dwc2 would sometimes fail enumeration. The fix is simple, just converting a dev_info() into dev_dbg(). Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Francesco Ruggeri authored
Commit f95499c3 ("n_tty: Don't wait for buffer work in read() loop") introduces a race window where a pty master can be signalled that the pty slave was closed before all the data that the slave wrote is delivered. Commit f8747d4a ("tty: Fix pty master read() after slave closes") fixed the problem in case of n_tty_read, but the problem still exists for n_tty_poll. This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done' where test.py is: import os, select, pty (pid, pty_fd) = pty.fork() if pid == 0: os.write(1, 'This string should be received by parent') else: poller = select.epoll() poller.register( pty_fd, select.EPOLLIN ) ready = poller.poll( 1 * 1000 ) for fd, events in ready: if not events & select.EPOLLIN: print 'missed POLLIN event' else: print os.read(fd, 100) poller.close() The string from the slave is missed several times. This patch takes the same approach as the fix for read and special cases this condition for poll. Tested on 3.16. Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.18-rc4 Two fixes of non-atomic allocations in write paths. Signed-off-by:
Johan Hovold <johan@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "This fixes an oops when enabling SR-IOV VF devices. The oops is a regression I added by configuring all devices during enumeration. - Don't oops on virtual buses in acpi_pci_get_bridge_handle() (Yinghai Lu)" * tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()
-