- 23 Jan, 2016 35 commits
-
-
Herbert Xu authored
[ Upstream commit 3a324606 ] William Hua <william.hua@canonical.com> wrote: > > I wasn't aware there was an enforced minimum size. I simply set the > nelem_hint in the rhastable_params struct to 1, expecting it to grow as > needed. This caused a segfault afterwards when trying to insert an > element. OK we're doing the size computation before we enforce the limit on min_size. ---8<--- We need to do the initial hash table size computation after we have obtained the correct min_size/max_size parameters. Otherwise we may end up with a hash table whose size is outside the allowed envelope. Fixes: a998f712 ("rhashtable: Round up/down min/max_size to...") Reported-by:
William Hua <william.hua@canonical.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hannes Frederic Sowa authored
[ Upstream commit 9b29c696 ] Bjørn reported that while we switch all interfaces to privacy stable mode when setting the secret, we don't set this mode for new interfaces. This does not make sense, so change this behaviour. Fixes: 622c81d5 ("ipv6: generation of stable privacy addresses for link-local and autoconf") Reported-by:
Bjørn Mork <bjorn@mork.no> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
tadeusz.struk@intel.com authored
[ Upstream commit 130ed5d1 ] msg_iocb needs to be initialized on the recv/recvfrom path. Otherwise afalg will wrongly interpret it as an async call. Cc: stable@vger.kernel.org Reported-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5233252f ] Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 225734de ] Stas Nichiporovich reported a regression in his HFSC qdisc setup on a non multi queue device. It turns out I mistakenly added a TCQ_F_NOPARENT flag on all qdisc allocated in qdisc_create() for non multi queue devices, which was rather buggy. I was clearly mislead by the TCQ_F_ONETXQUEUE that is also set here for no good reason, since it only matters for the root qdisc. Fixes: 4eaf3b84 ("net_sched: fix qdisc_tree_decrease_qlen() races") Reported-by:
Stas Nichiporovich <stasn77@gmail.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit ac5cc977 ] Dmitry reported the following out-of-bound access: Call Trace: [<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:294 [<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880 [< inline >] SYSC_setsockopt net/socket.c:1746 [<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729 [<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 This is because we mistake a raw socket as a tcp socket. We should check both sk->sk_type and sk->sk_protocol to ensure it is a tcp socket. Willem points out __skb_complete_tx_timestamp() needs to fix as well. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit f6548615 ] skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit a6e18ff1 ] When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 09ccfd23 ] Reported-by:
Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5037e9ef ] David Wilder reported crashes caused by dst reuse. <quote David> I am seeing a crash on a distro V4.2.3 kernel caused by a double release of a dst_entry. In ipv4_dst_destroy() the call to list_empty() finds a poisoned next pointer, indicating the dst_entry has already been removed from the list and freed. The crash occurs 18 to 24 hours into a run of a network stress exerciser. </quote> Thanks to his detailed report and analysis, we were able to understand the core issue. IP early demux can associate a dst to skb, after a lookup in TCP/UDP sockets. When socket cache is not properly set, we want to store into sk->sk_dst_cache the dst for future IP early demux lookups, by acquiring a stable refcount on the dst. Problem is this acquisition is simply using an atomic_inc(), which works well, unless the dst was queued for destruction from dst_release() noticing dst refcount went to zero, if DST_NOCACHE was set on dst. We need to make sure current refcount is not zero before incrementing it, or risk double free as David reported. This patch, being a stable candidate, adds two new helpers, and use them only from IP early demux problematic paths. It might be possible to merge in net-next skb_dst_force() and skb_dst_force_safe(), but I prefer having the smallest patch for stable kernels : Maybe some skb_dst_force() callers do not expect skb->dst can suddenly be cleared. Can probably be backported back to linux-3.6 kernels Reported-by:
David J. Wilder <dwilder@us.ibm.com> Tested-by:
-
Sergei Shtylyov authored
[ Upstream commit 248be83d ] In a low memory situation the following kernel oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = 8490c000 [00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.4-at16 #9) PC is at skb_put+0x10/0x98 LR is at sh_eth_poll+0x2c8/0xa10 pc : [<8035f780>] lr : [<8028bf50>] psr: 60000113 sp : 84eb1a90 ip : 84eb1ac8 fp : 84eb1ac4 r10: 0000003f r9 : 000005ea r8 : 00000000 r7 : 00000000 r6 : 940453b0 r5 : 00030000 r4 : 9381b180 r3 : 00000000 r2 : 00000000 r1 : 000005ea r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4248c059 DAC: 00000015 Process klogd (pid: 2046, stack limit = 0x84eb02e8) [...] This is because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left NULL but sh_eth_rx() later uses it without checking. Add such check... Reported-by:
Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 79462ad0 ] 郭永刚 reported that one could simply crash the kernel as root by using a simple program: int socket_fd; struct sockaddr_in addr; addr.sin_port = 0; addr.sin_addr.s_addr = INADDR_ANY; addr.sin_family = 10; socket_fd = socket(10,3,0x40000000); connect(socket_fd , &addr,16); AF_INET, AF_INET6 sockets actually only support 8-bit protocol identifiers. inet_sock's skc_protocol field thus is sized accordingly, thus larger protocol identifiers simply cut off the higher bits and store a zero in the protocol fields. This could lead to e.g. NULL function pointer because as a result of the cut off inet_num is zero and we call down to inet_autobind, which is NULL for raw sockets. kernel: Call Trace: kernel: [<ffffffff816db90e>] ? inet_autobind+0x2e/0x70 kernel: [<ffffffff816db9a4>] inet_dgram_connect+0x54/0x80 kernel: [<ffffffff81645069>] SYSC_connect+0xd9/0x110 kernel: [<ffffffff810ac51b>] ? ptrace_notify+0x5b/0x80 kernel: [<ffffffff810236d8>] ? syscall_trace_enter_phase2+0x108/0x200 kernel: [<ffffffff81645e0e>] SyS_connect+0xe/0x10 kernel: [<ffffffff81779515>] tracesys_phase2+0x84/0x89 I found no particular commit which introduced this problem. CVE: CVE-2015-8543 Cc: Cong Wang <cwang@twopensource.com> Reported-by:
郭永刚 <guoyonggang@360.cn> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9470e24f ] SCTP is lacking proper np->opt cloning at accept() time. TCP and DCCP use ipv6_dup_options() helper, do the same in SCTP. We might later factorize this code in a common helper to avoid future mistakes. Reported-by:
-
Peter Wu authored
[ Upstream commit 90186af4 ] When an interface is brought up which was previously suspended (via runtime PM), it would hang. This happens because napi_disable is called before napi_enable. Solve this by avoiding napi_enable in the resume during open function (netif_running is true when open is called, IFF_UP is set after a successful open; netif_running is false when close is called, but IFF_UP is then still set). While at it, remove WORK_ENABLE check from rtl8152_open (introduced with the original change) because it cannot happen: - After this patch, runtime resume will not set it during rtl8152_open. - When link is up, rtl8152_open is not called. - When link is down during system/auto suspend/resume, it is not set. Fixes: 41cec84c ("r8152: don't enable napi before rx ready") Link: https://lkml.kernel.org/r/20151205105912.GA1766@alSigned-off-by:
Peter Wu <peter@lekensteyn.nl> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit ed7d42e2 ] In case of a tx queue timeout every transmit is blocked until the QCA7000 resets himself and triggers a sync which makes the driver flushs the tx ring. So avoid this blocking situation by triggering the sync immediately after the timeout. Waking the queue doesn't make sense in this situation. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 50a5ffb1 ] As we are keeping timestamps on when copying the socket, we also have to copy sk_tsflags. This is needed since b9f40e21 ("net-timestamp: move timestamp flags out of sk_flags"). Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 01ce63c9 ] Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy related to disabling sock timestamp. When SCTP accepts an association or peel one off, it copies sock flags but forgot to call net_enable_timestamp() if a packet timestamping flag was copied, leading to extra calls to net_disable_timestamp() whenever such clones were closed. The fix is to call net_enable_timestamp() whenever we copy a sock with that flag on, like tcp does. Reported-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit cb5e173e ] SCTP echoes a cookie o INIT ACK chunks that contains a timestamp, for detecting stale cookies. This cookie is echoed back to the server by the client and then that timestamp is checked. Thing is, if the listening socket is using packet timestamping, the cookie is encoded with ktime_get() value and checked against ktime_get_real(), as done by __net_timestamp(). The fix is to sctp also use ktime_get_real(), so we can compare bananas with bananas later no matter if packet timestamping was enabled or not. Fixes: 52db882f ("net: sctp: migrate cookie life from timeval to ktime") Signed-off-by:
-
Jiri Benc authored
[ Upstream commit c5fb8caa ] Commit 3511494c ("vxlan: Group Policy extension") changed definition of VXLAN_HF_RCO from 0x00200000 to BIT(24). This is obviously incorrect. It's also in violation with the RFC draft. Fixes: 3511494c ("vxlan: Group Policy extension") Cc: Thomas Graf <tgraf@suug.ch> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 9a1ec461 ] Commit 64236f3f ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") failed to update the setting of the IFA_F_OPTIMISTIC flag, causing the IFA_F_STABLE_PRIVACY flag to be lost if IFA_F_OPTIMISTIC is set. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Fixes: 64236f3f ("ipv6: introduce IFA_F_STABLE_PRIVACY flag") Signed-off-by:
-
Pavel Machek authored
[ Upstream commit f2a3771a ] atl1c driver is doing order-4 allocation with GFP_ATOMIC priority. That often breaks networking after resume. Switch to GFP_KERNEL. Still not ideal, but should be significantly better. atl1c_setup_ring_resources() is called from .open() function, and already uses GFP_KERNEL, so this change is safe. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 6a61d4db ] Parameters were updated only if the kernel was unable to find the tunnel with the new parameters, ie only if core pamareters were updated (keys, addr, link, type). Now it's possible to update ttl, hoplimit, flowinfo and flags. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit fe53985a ] pppoe_connect() mustn't touch the padt_work field of pppoe sockets because that work could be already pending. [ 21.473147] BUG: unable to handle kernel NULL pointer dereference at 00000004 [ 21.474523] IP: [<c1043177>] process_one_work+0x29/0x31c [ 21.475164] *pde = 00000000 [ 21.475513] Oops: 0000 [#1] SMP [ 21.475910] Modules linked in: pppoe pppox ppp_generic slhc crc32c_intel aesni_intel virtio_net xts aes_i586 lrw gf128mul ablk_helper cryptd evdev acpi_cpufreq processor serio_raw button ext4 crc16 mbcache jbd2 virtio_blk virtio_pci virtio_ring virtio [ 21.476168] CPU: 2 PID: 164 Comm: kworker/2:2 Not tainted 4.4.0-rc1 #1 [ 21.476168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 21.476168] task: f5f83c00 ti: f5e28000 task.ti: f5e28000 [ 21.476168] EIP: 0060:[<c1043177>] EFLAGS: 00010046 CPU: 2 [ 21.476168] EIP is at process_one_work+0x29/0x31c [ 21.484082] EAX: 00000000 EBX: f678b2a0 ECX: 00000004 EDX: 00000000 [ 21.484082] ESI: f6c69940 EDI: f5e29ef0 EBP: f5e29f0c ESP: f5e29edc [ 21.484082] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 21.484082] CR0: 80050033 CR2: 000000a4 CR3: 317ad000 CR4: 00040690 [ 21.484082] Stack: [ 21.484082] 00000000 f6c69950 00000000 f6c69940 c0042338 f5e29f0c c1327945 00000000 [ 21.484082] 00000008 f678b2a0 f6c69940 f678b2b8 f5e29f30 c1043984 f5f83c00 f6c69970 [ 21.484082] f678b2a0 c10437d3 f6775e80 f678b2a0 c10437d3 f5e29fac c1047059 f5e29f74 [ 21.484082] Call Trace: [ 21.484082] [<c1327945>] ? _raw_spin_lock_irq+0x28/0x30 [ 21.484082] [<c1043984>] worker_thread+0x1b1/0x244 [ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229 [ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229 [ 21.484082] [<c1047059>] kthread+0x8f/0x94 [ 21.484082] [<c1327a32>] ? _raw_spin_unlock_irq+0x22/0x26 [ 21.484082] [<c1327ee9>] ret_from_kernel_thread+0x21/0x38 [ 21.484082] [<c1046fca>] ? kthread_parkme+0x19/0x19 [ 21.496082] Code: 5d c3 55 89 e5 57 56 53 89 c3 83 ec 24 89 d0 89 55 e0 8d 7d e4 e8 6c d8 ff ff b9 04 00 00 00 89 45 d8 8b 43 24 89 45 dc 8b 45 d8 <8b> 40 04 8b 80 e0 00 00 00 c1 e8 05 24 01 88 45 d7 8b 45 e0 8d [ 21.496082] EIP: [<c1043177>] process_one_work+0x29/0x31c SS:ESP 0068:f5e29edc [ 21.496082] CR2: 0000000000000004 [ 21.496082] ---[ end trace e362cc9cf10dae89 ]--- Reported-by:
Andrew <nitr0@seti.kr.ua> Fixes: 287f3a94 ("pppoe: Use workqueue to die properly when a PADT is received") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Ben Hutchings authored
commit 5377adb0 upstream. usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Hans Yang authored
commit 464ad8c4 upstream. When a USB 3.0 mass storage device is disconnected in transporting state, storage device driver may handle it as a transport error and reset the device by invoking usb_reset_and_verify_device() and following could happen: in usb_reset_and_verify_device(): udev->bos = NULL; For U1/U2 enabled devices, driver will disable LPM, and in some conditions: from usb_unlocked_disable_lpm() --> usb_disable_lpm() --> usb_enable_lpm() udev->bos->ss_cap->bU1devExitLat; And it causes 'NULL pointer' and 'kernel panic': [ 157.976257] Unable to handle kernel NULL pointer dereference at virtual address 00000010 ... [ 158.026400] PC is at usb_enable_link_state+0x34/0x2e0 [ 158.031442] LR is at usb_enable_lpm+0x98/0xac ... [ 158.137368] [<ffffffc0006a1cac>] usb_enable_link_state+0x34/0x2e0 [ 158.143451] [<ffffffc0006a1fec>] usb_enable_lpm+0x94/0xac [ 158.148840] [<ffffffc0006a20e8>] usb_disable_lpm+0xa8/0xb4 ... [ 158.214954] Kernel panic - not syncing: Fatal exception This commit moves 'udev->bos = NULL' behind usb_unlocked_disable_lpm() to prevent from NULL pointer access. Issue can be reproduced by following setup: 1) A SS pen drive behind a SS hub connected to the host. 2) Transporting data between the pen drive and the host. 3) Abruptly disconnect hub and pen drive from host. 4) With a chance it crashes. Signed-off-by:
Hans Yang <hansy@nvidia.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Arnd Bergmann authored
commit 183e53e8 upstream. The CPPI-4.1 driver selects TI_CPPI41, which is a dmaengine driver and that may not be available when CONFIG_DMADEVICES is not set: warning: (USB_TI_CPPI41_DMA) selects TI_CPPI41 which has unmet direct dependencies (DMADEVICES && ARCH_OMAP) This adds an extra dependency to avoid generating warnings in randconfig builds. Ideally we'd remove the 'select' statement, but that has the potential to break defconfig files. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 411dd19c ("usb: musb: Kconfig: Select the DMA driver if DMA mode of MUSB is enabled") Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
commit 391e6dcb upstream. pxa27x disconnects pullups on suspend but doesn't notify the gadget driver about it, so gadget driver can't disable the endpoints it was using. This causes problems on resume because gadget core will think endpoints are still enabled and just ignore the following usb_ep_enable(). Fix this problem by calling gadget_driver->disconnect(). Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Alexey Khoroshilov authored
commit f9fa1887 upstream. qset_fill_page_list() do not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Alan Stern authored
commit ad87e032 upstream. Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by:
-
Konstantin Shkolnyy authored
commit 7c90e610 upstream. CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID and completely different from CP210x devices. Signed-off-by:
Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Dmitry Katsubo authored
commit 9fa62b1a upstream. The patch extends the family of SATA-to-USB JMicron adapters that need FUA to be disabled and applies the same policy for uas driver. See details in http://unix.stackexchange.com/questions/237204/Signed-off-by:
Dmitry Katsubo <dmitry.katsubo@gmail.com> Tested-by:
-
Jonas Jonsson authored
commit a0e80fbd upstream. The flash loader has been seen on a Telit UE910 modem. The flash loader is a bit special, it presents both an ACM and CDC Data interface but only the latter is useful. Unless a magic string is sent to the device it will disappear and the regular modem device appears instead. Signed-off-by:
Jonas Jonsson <jonas@ludd.ltu.se> Tested-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Jonas Jonsson authored
commit f33a7f72 upstream. Some modems, such as the Telit UE910, are using an Infineon Flash Loader utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC Data). The latter can be used as a serial interface to upgrade the firmware of the modem. However, that isn't possible when the cdc-acm driver takes control of the device. The following is an explanation of the behaviour by Daniele Palmas during discussion on linux-usb. "This is what happens when the device is turned on (without modifying the drivers): [155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci [155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041 [155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device This is the flashing device that is caught by the cdc-acm driver. Once the ttyACM appears, the application starts sending a magic string (simple write on the file descriptor) to keep the device in flashing mode. If this magic string is not properly received in a certain time interval, the modem goes on in normal operative mode: [155493.748094] usb 1-3: USB disconnect, device number 27 [155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci [155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021 [155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM [155495.059989] usb 1-3: Manufacturer: Telit [155495.059992] usb 1-3: SerialNumber: 359658044004697 [155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device [155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device [155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device [155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device [155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device [155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14 Using the cdc-acm driver, the string, though being sent in the same way than using the usb-serial-simple driver (I can confirm that the data is passing properly since I used an hw usb sniffer), does not make the device to stay in flashing mode." Signed-off-by:
-
Azael Avalos authored
commit d2f20619 upstream. Commit 53147b6c ("toshiba_acpi: Fix hotkeys registration on some toshiba models") fixed an issue on some laptops regarding hotkeys registration, however, if failed to address the initialization of the hotkey_event_type variable, and thus, it can lead to potential unwanted effects as the variable is being checked. This patch initializes such variable to avoid such unwanted effects. Signed-off-by:
Azael Avalos <coproscefalo@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Jarkko Sakkinen authored
commit 399235dc upstream. Both for FIFO and CRB interface TCG has decided to use the same HID MSFT0101. They can be differentiated by looking at the start method from TPM2 ACPI table. This patches makes necessary fixes to tpm_tis and tpm_crb modules in order to correctly detect, which module should be used. For MSFT0101 we must use struct acpi_driver because struct pnp_driver has a 7 character limitation. It turned out that the root cause in b371616b was not correct for https://bugzilla.kernel.org/show_bug.cgi?id=98181. v2: * One fixup was missing from v1: is_tpm2_fifo -> is_fifo v3: * Use pnp_driver for existing HIDs and acpi_driver only for MSFT0101 in order ensure backwards compatibility. v4: * Check for FIFO before doing *anything* in crb_acpi_add(). * There was return immediately after acpi_bus_unregister_driver() in cleanup_tis(). This caused pnp_unregister_driver() not to be called. Reported-by:
Michael Saunders <mick.saunders@gmail.com> Reported-by:
Michael Marley <michael@michaelmarley.com> Reported-by:
Jethro Beekman <kernel@jbeekman.nl> Reported-by:
Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
- 15 Dec, 2015 5 commits
-
-
Greg Kroah-Hartman authored
-
Lu, Han authored
commit e2656412 upstream. Broxton and Skylake have the same behavior on display audio. So this patch applys Skylake fix-ups to Broxton. Signed-off-by:
Lu, Han <han.lu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arnd Bergmann authored
commit 777d738a upstream. create_request_message() computes the maximum length of a message, but uses the wrong type for the time stamp: sizeof(struct timespec) may be 8 or 16 depending on the architecture, while sizeof(struct ceph_timespec) is always 8, and that is what gets put into the message. Found while auditing the uses of timespec for y2038 problems. Fixes: b8e69066 ("ceph: include time stamp in every MDS request") Signed-off-by:
Yan, Zheng <zyan@redhat.com> Signed-off-by:
-
Junxiao Bi authored
commit 8f1eb487 upstream. New created file's mode is not masked with umask, and this makes umask not work for ocfs2 volume. Fixes: 702e5bc6 ("ocfs2: use generic posix ACL infrastructure") Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jeff Layton authored
commit c812012f upstream. If we pass in an empty nfs_fattr struct to nfs_update_inode, it will (correctly) not update any of the attributes, but it then clears the NFS_INO_INVALID_ATTR flag, which indicates that the attributes are up to date. Don't clear the flag if the fattr struct has no valid attrs to apply. Reviewed-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
