- 27 May, 2020 1 commit
-
-
Rikard Falkeborn authored
The struct sun50i_iommu_ops is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 14358 2501 64 16923 421b drivers/iommu/sun50i-iommu.o After: text data bss dec hex filename 14726 2117 64 16907 420b drivers/iommu/sun50i-iommu.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200525214958.30015-3-rikard.falkeborn@gmail.comSigned-off-by:
Joerg Roedel <jroedel@suse.de>
-
- 19 May, 2020 1 commit
-
-
Wei Yongjun authored
In case of error, the function devm_platform_ioremap_resource() returns ERR_PTR() not NULL. The NULL test in the return value check must be replaced with IS_ERR(). Fixes: 4100b8c2 ("iommu: Add Allwinner H6 IOMMU driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
-
- 14 May, 2020 4 commits
-
-
Joerg Roedel authored
Allocate zeroed memory so there is no need to memset it to 0 in the driver. Signed-off-by:
-
Joerg Roedel authored
A few compile warnings show up when building this driver: CC drivers/iommu/sun50i-iommu.o drivers/iommu/sun50i-iommu.c: In function ‘sun50i_dte_get_page_table’: drivers/iommu/sun50i-iommu.c:486:16: warning: unused variable ‘flags’ [-Wunused-variable] 486 | unsigned long flags; | ^~~~~ drivers/iommu/sun50i-iommu.c: In function ‘sun50i_iommu_unmap’: drivers/iommu/sun50i-iommu.c:559:23: warning: unused variable ‘iommu’ [-Wunused-variable] 559 | struct sun50i_iommu *iommu = sun50i_domain->iommu; | ^~~~~ drivers/iommu/sun50i-iommu.c: In function ‘sun50i_iommu_probe_device’: drivers/iommu/sun50i-iommu.c:749:22: warning: unused variable ‘group’ [-Wunused-variable] 749 | struct iommu_group *group; | ^~~~~ Remove the unused variables. Signed-off-by: -
Maxime Ripard authored
The Allwinner H6 has introduced an IOMMU for a few DMA controllers, mostly video related: the display engine, the video decoders / encoders, the camera capture controller, etc. The design is pretty simple compared to other IOMMUs found in SoCs: there's a single instance, controlling all the masters, with a single address space. It also features a performance monitoring unit that allows to retrieve various informations (per-master and global TLB accesses, hits and misses, access latency, etc) that isn't supported at the moment. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/d122a8670361e36fc26b4ce2674a2223d30dc4cc.1589378833.git-series.maxime@cerno.techSigned-off-by:
-
Maxime Ripard authored
The Allwinner H6 has introduced an IOMMU. Let's add a device tree binding for it. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/f3e1633677a9cf9cf36fe3582f0168fae94c1b3e.1589378833.git-series.maxime@cerno.techSigned-off-by:
-
- 13 May, 2020 5 commits
-
-
Joerg Roedel authored
Linux 5.7-rc4
-
Andy Shevchenko authored
Unify format of the printed messages, i.e. replace printk(LEVEL ... ) with pr_level(...). Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200507161804.13275-2-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Arnd Bergmann authored
gcc warns because the only reference to ipmmu_find_group is inside of an #ifdef: drivers/iommu/ipmmu-vmsa.c:878:28: error: 'ipmmu_find_group' defined but not used [-Werror=unused-function] Change the #ifdef to an equivalent IS_ENABLED(). Fixes: 6580c8a7 ("iommu/renesas: Convert to probe/release_device() call-backs") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Simon Horman <horms@verge.net.au> Link: https://lore.kernel.org/r/20200508220224.688985-1-arnd@arndb.deSigned-off-by:
-
Thierry Reding authored
The host1x bus implemented on Tegra SoCs is primarily an abstraction to create logical device from multiple platform devices. Since the devices in such a setup are typically hierarchical, DMA setup still needs to be done so that DMA masks can be properly inherited, but we don't actually want to attach the host1x logical devices to any IOMMU. The platform devices that make up the logical device are responsible for memory bus transactions, so it is them that will need to be attached to the IOMMU. Add a check to __iommu_probe_device() that aborts IOMMU setup early for busses that don't have the IOMMU operations pointer set since they will cause a crash otherwise. Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200511161000.3853342-1-thierry.reding@gmail.comSigned-off-by:
-
Qian Cai authored
The commit dce8d696 ("iommu/amd: Convert to probe/release_device() call-backs") introduced an unused variable, drivers/iommu/amd_iommu.c: In function 'amd_iommu_uninit_device': drivers/iommu/amd_iommu.c:422:20: warning: variable 'iommu' set but not used [-Wunused-but-set-variable] struct amd_iommu *iommu; ^~~~~ Signed-off-by:
Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200509015645.3236-1-cai@lca.pw Fixes: dce8d696 ("iommu/amd: Convert to probe/release_device() call-backs") Signed-off-by:
-
- 05 May, 2020 29 commits
-
-
Joerg Roedel authored
The function is now only used in IOMMU core code and shouldn't be used outside of it anyway, so remove the export for it. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
-
Joerg Roedel authored
Move the calls to dev_iommu_get() and try_module_get() into __iommu_probe_device(), so that the callers don't have to do it on their own. Signed-off-by:
-
Joerg Roedel authored
All drivers are converted to use the probe/release_device() call-backs, so the add_device/remove_device() pointers are unused and the code using them can be removed. Signed-off-by:
-
Joerg Roedel authored
Convert the Exynos IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
On Exynos platforms there can be more than one SYSMMU (IOMMU) for one DMA master device. Since the IOMMU core code expects only one hardware IOMMU, use the first SYSMMU in the list. Signed-off-by:
-
Joerg Roedel authored
Convert the OMAP IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Remove the tracking of device which could not be probed because their IOMMU is not probed yet. Replace it with a call to bus_iommu_probe() when a new IOMMU is probed. Signed-off-by:
-
Joerg Roedel authored
Convert the Renesas IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the Tegra IOMMU drivers to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the Rockchip IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the QCOM IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the Mediatek-v1 IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the Mediatek IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the MSM IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the VirtIO IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the S390 IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the PAMU IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the arm-smmu and arm-smmu-v3 drivers to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Convert the Intel IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200429133712.31431-17-joro@8bytes.orgSigned-off-by:
-
Joerg Roedel authored
Convert the AMD IOMMU Driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by:
-
Joerg Roedel authored
Make use of generic IOMMU infrastructure to gather the same information carried in dev_data->passthrough and remove the struct member. Signed-off-by:
-
Joerg Roedel authored
Add a check to the bus_iommu_probe() call-path to make sure it ignores devices which have already been successfully probed. Then export the bus_iommu_probe() function so it can be used by IOMMU drivers. Signed-off-by:
-
Joerg Roedel authored
After the previous changes the iommu group may not have a default domain when iommu_group_add_device() is called. With no default domain iommu_group_create_direct_mappings() will do nothing and no direct mappings will be created. Rename iommu_group_create_direct_mappings() to iommu_create_device_direct_mappings() to better reflect that the function creates direct mappings only for one device and not for all devices in the group. Then move the call to the places where a default domain actually exists. Signed-off-by:
-
Joerg Roedel authored
When a bus is initialized with iommu-ops, all devices on the bus are scanned and iommu-groups are allocated for them, and each groups will also get a default domain allocated. Until now this happened as soon as the group was created and the first device added to it. When other devices with different default domain requirements were added to the group later on, the default domain was re-allocated, if possible. This resulted in some back and forth and unnecessary allocations, so change the flow to defer default domain allocation until all devices have been added to their respective IOMMU groups. The default domains are allocated for newly allocated groups after each device on the bus is handled and was probed by the IOMMU driver. Signed-off-by:
-
Joerg Roedel authored
This makes it easier to remove to old code-path when all drivers are converted. As a side effect that it also fixes the error cleanup path. Signed-off-by:
-
Joerg Roedel authored
This is needed to defer default_domain allocation for new IOMMU groups until all devices have been added to the group. Signed-off-by:
-
Joerg Roedel authored
Well, not really. The call to iommu_alloc_default_domain() in iommu_group_get_for_dev() has to stay around as long as there are IOMMU drivers using the add/remove_device() call-backs instead of probe/release_device(). Those drivers expect that iommu_group_get_for_dev() returns the device attached to a group and the group set up with a default domain (and the device attached to the groups current domain). But when all drivers are converted this compatability mess can be removed. Signed-off-by:
-
Joerg Roedel authored
Add call-backs to 'struct iommu_ops' as an alternative to the add_device() and remove_device() call-backs, which will be removed when all drivers are converted. The new call-backs will not setup IOMMU groups and domains anymore, so also add a probe_finalize() call-back where the IOMMU driver can do per-device setup work which require the device to be set up with a group and a domain. Signed-off-by:
-
Joerg Roedel authored
When check_device() fails on the device, it is not handled by the IOMMU and amd_iommu_add_device() needs to return -ENODEV. Signed-off-by:
-
