clk_get() used to return NULL or an errno value depending on whether a
clkdev lookup failed or a clock wasn't found in the primary clock list.
As these disjoint paths were unified and everything now is handled via
clkdev lookups, the NULL case never makes it out of clk_get(). Update
accordingly and always look to the errno value.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Trivial cleanup.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This V2 patch changes the clock disabling behavior during boot.
Two different changes are made:

1) Delay disabling of clocks until late in the boot process.
   This fixes an existing issue where in-use clocks without
   software reference are disabled by mistake during boot.
   One example of this is the handling of the Mackerel serial
   console output that shares clock with the I2C controller.

2) Write out the "disabled" state to the hardware for clocks
   that not have been used by the kernel. In other words,
   make sure so far unused clocks actually get turned off.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: agstart field must be 64 bits
  JFS: Don't save agno in the inode
  jfs: Update agstart when resizing volume
  jfs: old_agsize should be 64 bits in jfs_extendfs

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PCI / PM: Block races between runtime PM and system sleep
  PM / Domains: Update documentation
  PM / Runtime: Handle clocks correctly if CONFIG_PM_RUNTIME is unset
  PM: Fix async resume following suspend failure
  PM: Free memory bitmaps if opening /dev/snapshot fails
  PM: Rename dev_pm_info.in_suspend to is_prepared
  PM: Update documentation regarding sysdevs
  PM / Runtime: Update doc: usage count no longer incremented across system PM

Commit 959ecc48 ("mm/memory_hotplug.c: fix building of node hotplug
zonelist") does not protect the build_all_zonelists() call with
zonelists_mutex as needed.  This can lead to races in constructing
zonelist ordering if a concurrent build is underway.  Protecting this
with lock_memory_hotplug() is insufficient since zonelists can be
rebuild though sysfs as well.
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The error handling in mem_online_node() is incorrect: hotadd_new_pgdat()
returns NULL if the new pgdat could not have been allocated and a pointer
to it otherwise.

mem_online_node() should fail if hotadd_new_pgdat() fails, not the
inverse.  This fixes an issue when memoryless nodes are not onlined and
their sysfs interface is not registered when their first cpu is brought
up.

The bug was introduced by commit cf23422b ("cpu/mem hotplug: enable
CPUs online before local memory online") iow v2.6.35.
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix error handling in construct_key_and_link().

If construct_alloc_key() returns an error, it shouldn't pass out through
the normal path as the key_serial() called by the kleave() statement
will oops when it gets an error code in the pointer:

  BUG: unable to handle kernel paging request at ffffffffffffff84
  IP: [<ffffffff8120b401>] request_key_and_link+0x4d7/0x52f
  ..
  Call Trace:
   [<ffffffff8120b52c>] request_key+0x41/0x75
   [<ffffffffa00ed6e8>] cifs_get_spnego_key+0x206/0x226 [cifs]
   [<ffffffffa00eb0c9>] CIFS_SessSetup+0x511/0x1234 [cifs]
   [<ffffffffa00d9799>] cifs_setup_session+0x90/0x1ae [cifs]
   [<ffffffffa00d9c02>] cifs_get_smb_ses+0x34b/0x40f [cifs]
   [<ffffffffa00d9e05>] cifs_mount+0x13f/0x504 [cifs]
   [<ffffffffa00caabb>] cifs_do_mount+0xc4/0x672 [cifs]
   [<ffffffff8113ae8c>] mount_fs+0x69/0x155
   [<ffffffff8114ff0e>] vfs_kern_mount+0x63/0xa0
   [<ffffffff81150be2>] do_kern_mount+0x4d/0xdf
   [<ffffffff81152278>] do_mount+0x63c/0x69f
   [<ffffffff8115255c>] sys_mount+0x88/0xc2
   [<ffffffff814fbdc2>] system_call_fastpath+0x16/0x1b
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MN10300's asm/uaccess.h needs to #include linux/kernel.h to get might_sleep()
otherwise it fails to build on MN10300 allyesconfig.  This fails in a few
places with messages like the following:

  In file included from security/keys/trusted.c:14:
  include/linux/uaccess.h: In function '__copy_from_user_nocache':
  include/linux/uaccess.h:52: error: implicit declaration of function 'might_sleep'
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix decode_secinfo_maxsz
  NFSv4.1: Fix an off-by-one error in pnfs_generic_pg_test
  NFSv4.1: Fix some issues with pnfs_generic_pg_test
  NFSv4.1: file layout must consider pg_bsize for coalescing
  pnfs-obj: No longer needed to take an extra ref at add_device
  SUNRPC: Ensure the RPC client only quits on fatal signals
  NFSv4: Fix a readdir regression
  nfs4.1: mark layout as bad on error path in _pnfs_return_layout
  nfs4.1: prevent race that allowed use of freed layout in _pnfs_return_layout
  NFSv4.1: need to put_layout_hdr on _pnfs_return_layout error path
  NFS: (d)printks should use %zd for ssize_t arguments
  NFSv4.1: fix break condition in pnfs_find_lseg
  nfs4.1: fix several problems with _pnfs_return_layout
  NFSv4.1: allow zero fh array in filelayout decode layout
  NFSv4.1: allow nfs_fhget to succeed with mounted on fileid
  NFSv4.1: Fix a refcounting issue in the pNFS device id cache
  NFSv4.1: deprecate headerpadsz in CREATE_SESSION
  NFS41: do not update isize if inode needs layoutcommit
  NLM: Don't hang forever on NLM unlock requests
  NFS: fix umount of pnfs filesystems

After commit e8665002
(PM: Allow pm_runtime_suspend() to succeed during system suspend) it
is possible that a device resumed by the pm_runtime_resume(dev) in
pci_pm_prepare() will be suspended immediately from a work item,
timer function or otherwise, defeating the very purpose of calling
pm_runtime_resume(dev) from there.  To prevent that from happening
it is necessary to increment the runtime PM usage counter of the
device by replacing pm_runtime_resume() with pm_runtime_get_sync().
Moreover, the incremented runtime PM usage counter has to be
decremented by the corresponding pci_pm_complete(), via
pm_runtime_put_sync().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Commit 4d27e9dc (PM: Make power
domain callbacks take precedence over subsystem ones) forgot to
update the device power management documentation to take changes
made by it into account.  Correct that mistake.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Commit 85eb8c8d (PM / Runtime:
Generic clock manipulation rountines for runtime PM (v6)) converted
the shmobile platform to using generic code for runtime PM clock
management, but it changed the behavior for CONFIG_PM_RUNTIME unset
incorrectly.

Specifically, for CONFIG_PM_RUNTIME unset pm_runtime_clk_notify()
should enable clocks for action equal to BUS_NOTIFY_BIND_DRIVER and
it should disable them for action equal to BUS_NOTIFY_UNBOUND_DRIVER
(instead of BUS_NOTIFY_ADD_DEVICE and BUS_NOTIFY_DEL_DEVICE,
respectively).  Make this function behave as appropriate.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>

The PM core doesn't handle suspend failures correctly when it comes to
asynchronously suspended devices.  These devices are moved onto the
dpm_suspended_list as soon as the corresponding async thread is
started up, and they remain on the list even if they fail to suspend
or the sleep transition is cancelled before they get suspended.  As a
result, when the PM core unwinds the transition, it tries to resume
the devices even though they were never suspended.

This patch (as1474) fixes the problem by adding a new "is_suspended"
flag to dev_pm_info.  Devices are resumed only if the flag is set.

[rjw:
 * Moved the dev->power.is_suspended check into device_resume(),
   because we need to complete dev->power.completion and clear
   dev->power.is_prepared too for devices whose
   dev->power.is_suspended flags are unset.
 * Fixed __device_suspend() to avoid setting dev->power.is_suspended
   if async_error is different from zero.]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org

When opening /dev/snapshot device, snapshot_open() creates memory
bitmaps which are freed in snapshot_release(). But if any of the
callbacks called by pm_notifier_call_chain() returns NOTIFY_BAD, open()
fails, snapshot_release() is never called and bitmaps are not freed.
Next attempt to open /dev/snapshot then triggers BUG_ON() check in
create_basic_memory_bitmaps(). This happens e.g. when vmwatchdog module
is active on s390x.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org

This patch (as1473) renames the "in_suspend" field in struct
dev_pm_info to "is_prepared", in preparation for an upcoming change.
The new name is more descriptive of what the field really means.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org

The part of Documentation/power/devices.txt regarding sysdevs is not
valid any more after commit 2e711c04
(PM: Remove sysdev suspend, resume and shutdown operations), so
remove it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Commit e8665002 (PM: Allow
pm_runtime_suspend() to succeed during system suspend) removed usage
count increment across system PM.

Update doc to reflect this.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Ensure that LOS and DFE are being turned off
  RDMA/cxgb4: Couple of abort fixes
  RDMA/cxgb4: Don't truncate MR lengths
  RDMA/cxgb4: Don't exceed hw IQ depth limit for user CQs

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: Fix oops in jbd2_journal_remove_journal_head()
  jbd2: Remove obsolete parameters in the comments for some jbd2 functions
  ext4: fixed tracepoints cleanup
  ext4: use FIEMAP_EXTENT_LAST flag for last extent in fiemap
  ext4: Fix max file size and logical block counting of extent format file
  ext4: correct comments for ext4_free_blocks()

I initially did the calculation in bytes, and not words
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

And document what is going on there...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

1. If the intention is to coalesce requests 'prev' and 'req' then we
   have to ensure at least that we have a layout starting at
   req_offset(prev).

2. If we're only requesting a minimal layout of length desc->pg_count,
   we need to test the length actually returned by the server before
   we allow the coalescing to occur.

3. We need to deal correctly with (pgio->lseg == NULL)

4. Fixup the test guarding the pnfs_update_layout.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

IE bit position on CHCR register is not same in all DMAC.
This patch adds new "chcr_ie_bit" to decide it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

CHCR register position is not same in all DMAC.
This patch adds new "chcr_offset" to decide it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Fix the complie error in ehci-hcd.c because it needs an additional
configuration.

  CC      drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-hcd.c:1288:2: error: #error "missing bus glue for ehci-hcd"
make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Commit 13e12d14 ("vfs: reorganize 'struct inode' layout a bit")
moved things around a bit changed i_state to be unsigned int instead of
unsigned long.  That was to help structure layout for the 64-bit case,
and shrink 'struct inode' a bit (admittedly that only happened when
spinlock debugging was on and i_flags didn't pack with i_lock).

However, Meelis Roos reports that this results in unaligned exceptions
on sprc, and it turns out that the bit-locking primitives that we use
for the I_NEW bit want to use the bitops.  Which want 'unsigned long',
not 'unsigned int'.

We really should fix the bit locking code to not have that kind of
requirement, but that's a much bigger change.  So for now, revert that
field back to 'unsigned long' (but keep the other re-ordering changes
from the commit that caused this).

Andi points out that we have played games with this in 'struct page', so
it's solvable with other hacks too, but since right now the struct inode
size advantage only happens with some rare config options, it's not
worth fighting.

It _would_ be worth fixing the bitlocking code, though.  Especially
since there is no type safety in the bitlocking code (this never caused
any warnings, and worked fine on x86-64, because the bitlocks take a
'void *' and x86-64 doesn't care that deeply about alignment).  So it's
currently a very easy problem to trigger by mistake and never notice.
Reported-by: Meelis Roos <mroos@linux.ee>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms/r6xx+: voltage fixes
  drm/nouveau: drop leftover debugging
  drm/radeon: avoid warnings from r600/eg irq handlers on powered off card.
  drm/radeon/kms: add missing param for dce3.2 DP transmitter setup
  drm/radeon/kms/atom: fix duallink on some early DCE3.2 cards
  drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync
  drm/nv50/disp: fix gamma with page flipping overlay turned on
  drm/nouveau/pm: Prevent overflow in nouveau_perf_init()
  drm/nouveau: fix big-endian switch

* 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
  msm: timer: Fix DGT rate on 8960 and 8660
  msm: timer: compensate for timer shift in msm_read_timer_count
  msm: timer: Fix SMP build error

* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix break_lease flags on nfsd open
  nfsd: link returns nfserr_delay when breaking lease
  nfsd: v4 support requires CRYPTO
  nfsd: fix dependency of nfsd on auth_rpcgss

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  pxa168_eth: fix race in transmit path.
  ipv4, ping: Remove duplicate icmp.h include
  netxen: fix race in skb->len access
  sgi-xp: fix a use after free
  hp100: fix an skb->len race
  netpoll: copy dev name of slaves to struct netpoll
  ipv4: fix multicast losses
  r8169: fix static initializers.
  inet_diag: fix inet_diag_bc_audit()
  gigaset: call module_put before restart of if_open()
  farsync: add module_put to error path in fst_open()
  net: rfs: enable RFS before first data packet is received
  fs_enet: fix freescale FCC ethernet dp buffer alignment
  netdev: bfin_mac: fix memory leak when freeing dma descriptors
  vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support
  caif: Bugfix - XOFF removed channel from caif-mux
  tun: teach the tun/tap driver to support netpoll
  dp83640: drop PHY status frames in the driver.
  dp83640: fix phy status frame event parsing
  phylib: Allow BCM63XX PHY to be selected only on BCM63XX.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  devcgroup_inode_permission: take "is it a device node" checks to inlined wrapper
  fix comment in generic_permission()
  kill obsolete comment for follow_down()
  proc_sys_permission() is OK in RCU mode
  reiserfs_permission() doesn't need to bail out in RCU mode
  proc_fd_permission() is doesn't need to bail out in RCU mode
  nilfs2_permission() doesn't need to bail out in RCU mode
  logfs doesn't need ->permission() at all
  coda_ioctl_permission() is safe in RCU mode
  cifs_permission() doesn't need to bail out in RCU mode
  bad_inode_permission() is safe from RCU mode
  ubifs: dereferencing an ERR_PTR in ubifs_mount()

0xff01 is not an actual voltage value, but a flag
for the driver.  If the power state as that value,
skip setting the voltage.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>