- 18 Mar, 2020 1 commit
-
-
Olivier Moysan authored
The commit e894efef ("ASoC: core: add support to card rebind") allows to rebind the sound card after a rebind of one of its component. With this commit, the sound card is actually rebound, but may be no more functional. Corrections: - Call snd_dmaengine_pcm_register() before snd_soc_register_component(). - Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component() explicitly from SPDFIRX driver. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20200318144125.9163-3-olivier.moysan@st.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 16 Mar, 2020 11 commits
-
-
Mark Brown authored
This series adds more WMA profiles and WMA decoder parameters to UAPI and then support for these in qcom driver. It also adds FLAC and APE IDs and decoder parameters to UAPI and then support in qcom driver This was tested on Dragon board RB3. Last, bump up the compressed version so that userspace can check for the support. Since the series touches compress uapi and asoc, it would make sense to go thru asoc tree with acks. Changes in v3: - add r-b from Srini - use macros for FLAC channel layout tags Changes in v2: - use bitflags for wma profiles Vinod Koul (9): ALSA: compress: add wma codec profiles ALSA: compress: Add wma decoder params ASoC: qcom: q6asm: pass codec profile to q6asm_open_write ASoC: qcom: q6asm: add support to wma config ASoC: qcom: q6asm-dai: add support to wma decoder ALSA: compress: add alac & ape decoder params ASoC: qcom: q6asm: add support for alac and ape configs ASoC: qcom: q6asm-dai: add support for ALAC and APE decoders ALSA: compress: bump the version include/uapi/sound/compress_offload.h | 2 +- include/uapi/sound/compress_params.h | 37 +++- sound/soc/qcom/qdsp6/q6asm-dai.c | 139 ++++++++++++++- sound/soc/qcom/qdsp6/q6asm.c | 243 +++++++++++++++++++++++++- sound/soc/qcom/qdsp6/q6asm.h | 51 +++++- 5 files changed, 465 insertions(+), 7 deletions(-) -- 2.24.1
-
Srinivas Kandagatla authored
snd_soc_dai_get_sdw_stream() returns null if dai does not support this callback, this is no very useful for the caller to differentiate if this is an error or unsupported call for the dai. return -ENOTSUPP in cases where this callback is not supported. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200316151110.2580-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Vinod Koul authored
We have added support for bunch of new decoders and parameters for decoders. To help users find the support bump the version up to 0,2,0. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200316055221.1944464-10-vkoul@kernel.orgSigned-off-by:
-
Vinod Koul authored
Qualcomm DSPs also supports the ALAC and APE decoders, so add support for these and convert the snd_codec_params to qdsp format. Signed-off-by:
-
Vinod Koul authored
Qualcomm DSPs expect ALAC and APE configs to be send for decoders, so add the API to program the respective config to the DSP. Signed-off-by:
-
Vinod Koul authored
Add ALAC (Apple Lossless Audio Codec) and APE (Monkey's Lossless Audio Codec) defines and parameters required to configure these. Signed-off-by:
-
Vinod Koul authored
Qualcomm DSPs also supports the wma decoder, so add support for wma decoder and convert the snd_codec_params to qdsp format. Signed-off-by:
-
Vinod Koul authored
Qualcomm DSPs expect wma v9 and wma v10 configs to be set for wma decoders, so add the API to program the respective wma config to the DSP Signed-off-by:
-
Vinod Koul authored
Codec profile is required to be passed for WMA codecs so that we know the codec profile present and tell DSP accordingly, so update this API to pass the codec profile as argument Signed-off-by:
-
Vinod Koul authored
Some WMA decoders like WMAv10 etc need some additional encoder option parameters, so add these as WMA decoder params. Signed-off-by:
-
Vinod Koul authored
Some codec profiles were missing for WMA, like WMA9/10 lossless and wma10 pro, so add these profiles Signed-off-by:
-
- 13 Mar, 2020 26 commits
-
-
Mark Brown authored
Merge branch 'for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.7
-
Yong Zhi authored
Maxim MAX98360A audio amplifier is functionally identical to MAX98357A, add ACPI ID "MAX98360A" for driver reuse. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Link: https://lore.kernel.org/r/1584114926-29287-1-git-send-email-yong.zhi@intel.comSigned-off-by:
-
Mark Brown authored
Merge series "ASoC: SOF: multi-cpu dais, IPC and Intel improvements for 5.7" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Corrections for compatibility with the multi-cpu dai check for min-channels, IPC simplifications, and removal of unnecessary boot-related code for Intel platforms. Amery Song (2): ASoC: SOF: Intel: hda: remove unnecessary ROM IPC filter function ASoC: SOF: Intel: remove unnecessary waitq before loading firmware Bard Liao (2): ASoC: SOF: Intel: hda-dai: add stream capability ASoC: SOF: topology: connect dai widget to all cpu-dais Karol Trzcinski (2): ASoC: SOF: Make sof_ipc_ext_data enum more rigid ASoC: SOF: Remove SOF_IPC_EXT_DMA_BUFFER include/sound/sof/info.h | 22 +------- sound/soc/sof/intel/cnl.c | 5 -- sound/soc/sof/intel/hda-dai.c | 96 ++++++++++++++++++++++++++++++++ sound/soc/sof/intel/hda-ipc.c | 20 +------ sound/soc/sof/intel/hda-loader.c | 3 - sound/soc/sof/intel/hda.c | 3 - sound/soc/sof/intel/hda.h | 1 - sound/soc/sof/loader.c | 6 -- sound/soc/sof/sof-priv.h | 5 -- sound/soc/sof/topology.c | 8 ++- 10 files changed, 108 insertions(+), 61 deletions(-) base-commit: 101247a3 -- 2.20.1
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.7" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Fix HDaudio/HDMI Kconfig dependencies, cleanup code, and add support for 2 new configs (DA7219+Maxim 98360A and RT5692+RT1015) Note that the last patch is the first case where we added the Reviewed-by tags automagically from the list of GitHub approvers. Feedback/comments welcome on the format, and thanks to Ranjani for the nice script! Changes since v1: Change base to broonie/for-5.7 Rebase and fix for_each_codec_dais() macro in Patch 9. Add new patch to remove GFP_ATOMIC Guennadi Liakhovetski (3): ASoC: codecs: hdac_hdmi: (cosmetic) remove redundant variable initialisations ASoC: Intel: skylake: (cosmetic) remove redundant variable initialisations ASoC: Intel: (cosmetic) simplify structure member access Kai Vehmanen (4): ASoC: Intel: boards: drop reverse deps for SND_HDA_CODEC_HDMI ASoC: Intel: sof_pcm512x: drop reverse deps for SND_HDA_CODEC_HDMI ASoC: Intel: sof_pcm512x: make HDMI optional for all platforms ASoC: SOF: Intel: hda: remove SND_SOC_SOF_HDA_COMMON_HDMI_CODEC Pierre-Louis Bossart (1): ASoC: Intel: don't use GFP_ATOMIC for machine driver contexts Yong Zhi (2): ASoC: Intel: sof_da7219_max98373: Add support for max98360a speaker amp ASoC: Intel: sof_rt5682: Add rt1015 speaker amp support sound/soc/codecs/hdac_hdmi.c | 6 +- sound/soc/intel/boards/Kconfig | 20 ++-- sound/soc/intel/boards/bdw-rt5650.c | 2 +- sound/soc/intel/boards/bdw-rt5677.c | 2 +- sound/soc/intel/boards/broadwell.c | 2 +- sound/soc/intel/boards/bxt_da7219_max98357a.c | 2 +- sound/soc/intel/boards/bxt_rt298.c | 2 +- sound/soc/intel/boards/bytcht_da7213.c | 2 +- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 2 +- sound/soc/intel/boards/cht_bsw_nau8824.c | 2 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 2 +- sound/soc/intel/boards/cml_rt1011_rt5682.c | 4 +- sound/soc/intel/boards/glk_rt5682_max98357a.c | 2 +- sound/soc/intel/boards/haswell.c | 2 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 2 +- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 2 +- sound/soc/intel/boards/skl_hda_dsp_generic.c | 2 +- .../soc/intel/boards/skl_nau88l25_max98357a.c | 2 +- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 2 +- sound/soc/intel/boards/sof_da7219_max98373.c | 78 +++++++++++-- sound/soc/intel/boards/sof_pcm512x.c | 38 ++++-- sound/soc/intel/boards/sof_rt5682.c | 110 +++++++++++++++++- .../intel/common/soc-acpi-intel-jsl-match.c | 34 +++++- sound/soc/intel/skylake/skl.c | 4 +- sound/soc/sof/intel/Kconfig | 11 -- sound/soc/sof/intel/hda.c | 3 +- 26 files changed, 269 insertions(+), 71 deletions(-) base-commit: 101247a3 -- 2.20.1 -
Mark Brown authored
Merge series "ASoC: brcm: add dsl and pon chip audio driver" from Kevin Li <kevin-ke.li@broadcom.com>: Changes in v2: * Make the comment a C++ one for license header * Remove all empty functions * Change all variable to use kernel coding style * Comment chip TX RX block independently generate I2S bus signals Kevin Li (2): ASoC: brcm: Add DSL/PON SoC audio driver ASoC: brcm: DSL/PON SoC device tree bindings of audio driver .../bindings/sound/brcm,bcm63xx-audio.txt | 29 ++ sound/soc/bcm/Kconfig | 9 + sound/soc/bcm/Makefile | 4 + sound/soc/bcm/bcm63xx-i2s-whistler.c | 317 ++++++++++++ sound/soc/bcm/bcm63xx-i2s.h | 90 ++++ sound/soc/bcm/bcm63xx-pcm-whistler.c | 485 ++++++++++++++++++ 6 files changed, 934 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt create mode 100644 sound/soc/bcm/bcm63xx-i2s-whistler.c create mode 100644 sound/soc/bcm/bcm63xx-i2s.h create mode 100644 sound/soc/bcm/bcm63xx-pcm-whistler.c -- 2.25.1
-
Oder Chiou authored
The setting is sync with I2C/I2S mode. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20200313023850.28875-1-oder_chiou@realtek.comSigned-off-by:
-
Kevin Li authored
Signed-off-by:
Kevin Li <kevin-ke.li@broadcom.com> Link: https://lore.kernel.org/r/20200312223242.2843-1-kevin-ke.li@broadcom.comSigned-off-by:
-
Kevin Li authored
This patch adds Broadcom DSL/PON SoC audio driver with Whistler I2S block. The SoC supported by this patch are BCM63158B0,BCM63178 and BCM47622/6755 Signed-off-by:
-
Pierre-Louis Bossart authored
We've removed GFP_ATOMIC in all machine drivers and somehow this keeps coming back due to copy-paste. Move to GFP_KERNEL. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200312194859.4051-11-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Yong Zhi authored
This patch adds jsl_rt5682_rt1015 which supports the RT5682 headset codec and RT1015 speaker amplifier combination on JasperLake platform. Signed-off-by:
-
Yong Zhi authored
Add Maxim MAX98360A plug-and-play Class-D amplifier support on SSP1, new card ID is sofda7219max98360a, name sof-da7219max98360a. Signed-off-by:
-
Guennadi Liakhovetski authored
Fix a clumsy structure member dereference in all machine drivers. Signed-off-by:
-
Guennadi Liakhovetski authored
Variables, used as loop iterators, don't need to be initialised. Signed-off-by:
-
Guennadi Liakhovetski authored
Remove several redundant variable initialisations. Signed-off-by:
-
Kai Vehmanen authored
To help user-space with HDMI codec driver transition, both a kernel module parameter and a kernel option were initially provided to configure default behaviour of SOF on Intel hardware with commit 139c7feb ("ASoC: SOF: Intel: add support for snd-hda-codec-hdmi"). As hdac-hdmi is already now lagging in features compared to snd-hda-codec-hdmi, move ahead with the transition and remove the build option to select between the two, and instead default to snd-hda-codec-hdmi if it is enabled in kernel build. The old behaviour of using hdac-hdmi driver can still be forced via the kernel module parameter. Signed-off-by:
-
Kai Vehmanen authored
Make HDMI optional for APL and later platforms. If no HDMI codec is found on the HDA bus, the graphics side driver is missing or correct codec driver is not part of kernel build, codec_mask reflects this and HDMI is disabled. The DSP topology will still have the links for HDMI, so connect these to dummy codec to avoid failures in topology loading. This change also fixes a kernel oops that was triggered if sof_pcm512x was used with SOF configured to use hdac-hdmi (can be done via "use_common_hdmi=0" or by selecting CONFIG_SND_SOC_SOF_HDA_COMMON_HDMI_CODEC=n). This is not a supported configuration. Signed-off-by:
-
Kai Vehmanen authored
Having a reverse dependency to a config that has its own additional dependencies, is generally not recommended. And this applies to select statements for SND_HDA_CODEC_HDMI, e.g. the case where SND_HDA and SND_SOC_SOF_HDA are built as modules, but the machine driver is built-in, leading to compile errors (reported as i386-randconfig-e003-20200206). Give up on trying to define different dependencies based on SOF/SST selection, and simply add a "depends on" for SND_HDA_CODEC_HDMI. This fixes the issue with randconfigs. Only downside is that SND_HDA_CODEC_HDMI may be built unnecessarily in some cases, but this seems like the lesser evil. Signed-off-by:
-
Kai Vehmanen authored
Having a reverse dependency to a config that has its own additional dependencies, is generally not recommended. And this applies to select statements for SND_HDA_CODEC_HDMI, e.g. the case where SND_HDA and SND_SOC_SOF_HDA are built as modules, but the machine driver is built-in, leading to compile errors (reported as i386-randconfig-e003-20200206). Give up on trying to define different dependencies based on SOF/SST selection, and simply add a "depends on" for SND_HDA_CODEC_HDMI. This fixes the issue with randconfigs. Only downside is that SND_HDA_CODEC_HDMI may be built unnecessarily in some cases, but this seems like the lesser evil. Fixes: aa2b4a59 ('ASoC: Intel: boards: fix incorrect HDMI Kconfig dependency') Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Bard Liao authored
Extend code from single cpu-dai to multi-dai Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Amery Song authored
The HDA_DSP_IPC_PURGE_FW IPC from ROM is already handled in cl_dsp_init(), and it will never be received in the IRQ thread, so the wait condition on this IPC will never be satisfied. The wait before loading firmware is redundant and can be removed safely. Signed-off-by:
Amery Song <chao.song@intel.com> Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Reviewed-by:
-
Amery Song authored
The HDA_DSP_IPC_PURGE_FW IPC from ROM is already handled in cl_dsp_init(), and as IPC IRQ is disabled at this stage, this IPC will be never received in the IRQ thread. The function hda_dsp_ipc_is_sof for filtering the ROM IPC can be removed safely. Signed-off-by:
Keyon <yang.jie@intel.com> Reviewed-by:
-
Karol Trzcinski authored
This enum code, and what's more important, related structures is unused in whole source code, so it shouldn't be kept. Signed-off-by:
Karol Trzcinski <karolx.trzcinski@linux.intel.com> Signed-off-by:
-
Karol Trzcinski authored
It's a part of ABI interface, so enum value shouldn't change for example after removing some old enum code. Signed-off-by:
-
Bard Liao authored
snd_soc_dai_stream_valid() will check if the stream is valid by testing stream->channels_min. So we do need the information in dai driver. The stream name is not added since we want to sure playback_widget/capture_widget will be created by topology. Signed-off-by:
-
Oder Chiou authored
The max volume of the DAC1 Playback Volume is 0dB. Signed-off-by:
-
Takashi Iwai authored
snprintf() is a hard-to-use function, it's especially difficult to use it for concatenating substrings in a buffer with a limited size. Since snprintf() returns the would-be-output size, not the actual size, the subsequent use of snprintf() may point to the incorrect position. Use scnprintf() instead for fixing such potential errors. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200313130334.9028-1-tiwai@suse.deSigned-off-by:
-
- 12 Mar, 2020 2 commits
-
-
Amadeusz Sławiński authored
Function soc_tplg_dbytes_create(), calls soc_tplg_init_kcontrol() to perform additional driver specific initialization. While soc_tplg_init_kcontrol() ensures that component is valid before invoking ops->control_load, there is no such check at the end of soc_tplg_dbytes_create() where list_add() is used. Also in quite a few places, there is reference of tplg->comp->dapm or tplg->comp->card, without any checks for tplg->comp. In consequence of the above this may lead to referencing NULL pointer. This allows for removal of now unnecessary checks. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
-
Mark Brown authored
Merge series "ASoC: SOF: preparatory patches" from Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>: 2 preparatory patches for the SOF virtualisation work. No functional changes, only some code refactoring and exporting of helper functions. v2: rebase, no changes otherwise. Thanks Guennadi Guennadi Liakhovetski (2): ASoC: (cosmetic) simplify dpcm_prune_paths() ASoC: export DPCM runtime update functions include/sound/soc-dpcm.h | 4 +-- sound/soc/soc-dapm.c | 8 +++--- sound/soc/soc-pcm.c | 68 +++++++++++++++++++++++++----------------------- 3 files changed, 42 insertions(+), 38 deletions(-) -- 1.9.3
-
