- 26 Apr, 2010 33 commits
-
-
Stanislaw Gruszka authored
During backporting of a120e912 ("iwlwifi: sanity check before counting number of tfds can be free") we forget one hunk, what make lot of messages "free more than tfds_in_queue" show up in dmesg. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Tested-by:
Adel Gadllah <adel.gadllah@gmail.com> (picked from https://patchwork.kernel.org/patch/86722/) Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Wey-Yi Guy authored
commit be6b38bc upstream. Forget one hunk in 4965 during "iwlwifi: error checking for number of tfds in queue" patch. Reported-by:
Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Matt Helsley authored
commit 5a7aadfe upstream. When the cgroup freezer is used to freeze tasks we do not want to thaw those tasks during resume. Currently we test the cgroup freezer state of the resuming tasks to see if the cgroup is FROZEN. If so then we don't thaw the task. However, the FREEZING state also indicates that the task should remain frozen. This also avoids a problem pointed out by Oren Ladaan: the freezer state transition from FREEZING to FROZEN is updated lazily when userspace reads or writes the freezer.state file in the cgroup filesystem. This means that resume will thaw tasks in cgroups which should be in the FROZEN state if there is no read/write of the freezer.state file to trigger this transition before suspend. NOTE: Another "simple" solution would be to always update the cgroup freezer state during resume. However it's a bad choice for several reasons: Updating the cgroup freezer state is somewhat expensive because it requires walking all the tasks in the cgroup and checking if they are each frozen. Worse, this could easily make resume run in N^2 time where N is the number of tasks in the cgroup. Finally, updating the freezer state from this code path requires trickier locking because of the way locks must be ordered. Instead of updating the freezer state we rely on the fact that lazy updates only manage the transition from FREEZING to FROZEN. We know that a cgroup with the FREEZING state may actually be FROZEN so test for that state too. This makes sense in the resume path even for partially-frozen cgroups -- those that really are FREEZING but not FROZEN. Reported-by:
Oren Ladaan <orenl@cs.columbia.edu> Signed-off-by:
Matt Helsley <matthltc@us.ibm.com> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Mike Christie authored
commit 4ae0a6c1 upstream. We could be failing/stopping a connection due to libiscsi starting recovery/cleanup, but the xmit path or scsi eh thread path could be dropping the connection at the same time. As a result the session->state gets set to failed instead of in recovery. We end up not blocking the session and so the replacement timeout never gets started and we only end up failing the IO when scsi_softirq_done sees that the cmd has been running for (cmd->allowed + 1) * rq->timeout secs. We used to fail the IO right away so users are seeing a long delay when using dm-multipath. This problem was added in 2.6.28. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
Andrew Stubbs authored
commit d5ab7803 upstream. Ensure that the aux table is properly initialized, even when optional features are missing. Without this, the FDPIC loader did not work. Signed-off-by:
Andrew Stubbs <ams@codesourcery.com> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Matt Fleming authored
commit 4bea3418 upstream. For the boot, enable_mmu() is called from setup_arch() but we don't call setup_arch() for any of the other cpus. So turn on the non-boot cpu's mmu inside of start_secondary(). I noticed this bug on an SMP board when trying to map I/O memory (smsc911x registers) into the kernel address space. Since the Address Translation bit in MMUCR wasn't set, accessing the virtual address where the smsc911x registers were supposedly mapped actually performed a physical address access. Signed-off-by:
Matt Fleming <matt@console-pimps.org> Signed-off-by:
-
Christoph Hellwig authored
commit f1f724e4 upstream The radix-tree code requires it's users to serialize tag updates against other updates to the tree. While XFS protects tag updates against each other it does not serialize them against updates of the tree contents, which can lead to tag corruption. Fix the inode cache to always take pag_ici_lock in exclusive mode when updating radix tree tags. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Patrick Schreurs <patrick@news-service.com> Tested-by:
Alex Elder <aelder@sgi.com> Signed-off-by:
-
Dave Chinner authored
commit 77d7a0c2 upstream The introduction of barriers to loop devices has created a new IO order completion dependency that XFS does not handle. The loop device implements barriers using fsync and so turns a log IO in the XFS filesystem on the loop device into a data IO in the backing filesystem. That is, the completion of log IOs in the loop filesystem are now dependent on completion of data IO in the backing filesystem. This can cause deadlocks when a flush daemon issues a log force with an inode locked because the IO completion of IO on the inode is blocked by the inode lock. This in turn prevents further data IO completion from occuring on all XFS filesystems on that CPU (due to the shared nature of the completion queues). This then prevents the log IO from completing because the log is waiting for data IO completion as well. The fix for this new completion order dependency issue is to make the IO completion inode locking non-blocking. If the inode lock can't be grabbed, simply requeue the IO completion back to the work queue so that it can be processed later. This prevents the completion queue from being blocked and allows data IO completion on other inodes to proceed, hence avoiding completion order dependent deadlocks. Signed-off-by:
Dave Chinner <david@fromorbit.com> Reviewed-by:
-
Christoph Hellwig authored
commit e8b217e7 upstream Date: Tue, 2 Feb 2010 10:16:26 +1100 We always need to flush the disk write cache and can't skip it just because the no inode attributes have changed. Signed-off-by:
-
Dave Chinner authored
commit cbe132a8 upstream If we hold onto reserved blocks when doing a remount,ro we end up writing the blocks used count to disk that includes the reserved blocks. Reserved blocks are not actually used, so this results in the values in the superblock being incorrect. Hence if we run xfs_check or xfs_repair -n while the filesystem is mounted remount,ro we end up with an inconsistent filesystem being reported. Also, running xfs_copy on the remount,ro filesystem will result in an inconsistent image being generated. To fix this, unreserve the blocks when doing the remount,ro, and reserved them again on remount,rw. This way a remount,ro filesystem will appear consistent on disk to all utilities. Signed-off-by:
-
Christoph Hellwig authored
commit 9b00f307 upstream A "df" run on an NFS client of an exported XFS file system reports the wrong information for "available" blocks. When a block quota is enforced, the amount reported as free is limited by the quota, but the amount reported available is not (and should be). Reported-by:
Guk-Bong, Kwon <gbkwon@gmail.com> Signed-off-by:
-
Dave Chinner authored
commit e09f9860 upstream When swapping extents, we can corrupt inodes by swapping data forks that are in incompatible formats. This is caused by the two indoes having different fork offsets due to the presence of an attribute fork on an attr2 filesystem. xfs_fsr tries to be smart about setting the fork offset, but the trick it plays only works on attr1 (old fixed format attribute fork) filesystems. Changing the way xfs_fsr sets up the attribute fork will prevent this situation from ever occurring, so in the kernel code we can get by with a preventative fix - check that the data fork in the defragmented inode is in a format valid for the inode it is being swapped into. This will lead to files that will silently and potentially repeatedly fail defragmentation, so issue a warning to the log when this particular failure occurs to let us know that xfs_fsr needs updating/fixing. To help identify how to improve xfs_fsr to avoid this issue, add trace points for the inodes being swapped so that we can determine why the swap was rejected and to confirm that the code is making the right decisions and modifications when swapping forks. A further complication is even when the swap is allowed to proceed when the fork offset is different between the two inodes then value for the maximum number of extents the data fork can hold can be wrong. Make sure these are also set correctly after the swap occurs. Signed-off-by:
-
Dave Chinner authored
commit 4b6a4688 upstream When reclaiming stale inodes, we need to guarantee that inodes are unpinned before returning with a "clean" status. If we don't we can reclaim inodes that are pinned, leading to use after free in the transaction subsystem as transactions complete. Signed-off-by:
-
Dave Chinner authored
commit 57817c68 upstream We cannot do direct inode reclaim without taking the flush lock to ensure that we do not reclaim an inode under IO. We check the inode is clean before doing direct reclaim, but this is not good enough because the inode flush code marks the inode clean once it has copied the in-core dirty state to the backing buffer. It is the flush lock that determines whether the inode is still under IO, even though it is marked clean, and the inode is still required at IO completion so we can't reclaim it even though it is clean in core. Hence the requirement that we need to take the flush lock even on clean inodes because this guarantees that the inode writeback IO has completed and it is safe to reclaim the inode. With delayed write inode flushing, we could end up waiting a long time on the flush lock even for a clean inode. The background reclaim already handles this efficiently, so avoid all the problems by killing the direct reclaim path altogether. Signed-off-by:
-
Dave Chinner authored
commit 018027be upstream The reclaim code will handle flushing of dirty inodes before reclaim occurs, so avoid them when determining whether an inode is a candidate for flushing to disk when walking the radix trees. This is based on a test patch from Christoph Hellwig. Signed-off-by:
-
Dave Chinner authored
commit c8e20be0 upstream Make the inode tree reclaim walk exclusive to avoid races with concurrent sync walkers and lookups. This is a version of a patch posted by Christoph Hellwig that avoids all the code duplication. Signed-off-by:
-
Dave Chinner authored
commit fd45e478 upstream When we search for and find a busy extent during allocation we force the log out to ensure the extent free transaction is on disk before the allocation transaction. The current implementation has a subtle bug in it--it does not handle multiple overlapping ranges. That is, if we free lots of little extents into a single contiguous extent, then allocate the contiguous extent, the busy search code stops searching at the first extent it finds that overlaps the allocated range. It then uses the commit LSN of the transaction to force the log out to. Unfortunately, the other busy ranges might have more recent commit LSNs than the first busy extent that is found, and this results in xfs_alloc_search_busy() returning before all the extent free transactions are on disk for the range being allocated. This can lead to potential metadata corruption or stale data exposure after a crash because log replay won't replay all the extent free transactions that cover the allocation range. Modified-by:
-
Dave Chinner authored
commit 44e08c45 upstream Because inodes remain in cache much longer than inode buffers do under memory pressure, we can get the situation where we have stale, dirty inodes being reclaimed but the backing storage has been freed. Hence we should never, ever flush XFS_ISTALE inodes to disk as there is no guarantee that the backing buffer is in cache and still marked stale when the flush occurs. Signed-off-by:
-
Christoph Hellwig authored
commit d6d59bad upstream We currently have some rather odd code in xfs_setattr for updating the a/c/mtime timestamps: - first we do a non-transaction update if all three are updated together - second we implicitly update the ctime for various changes instead of relying on the ATTR_CTIME flag - third we set the timestamps to the current time instead of the arguments in the iattr structure in many cases. This patch makes sure we update it in a consistent way: - always transactional - ctime is only updated if ATTR_CTIME is set or we do a size update, which is a special case - always to the times passed in from the caller instead of the current time The only non-size caller of xfs_setattr that doesn't come from the VFS is updated to set ATTR_CTIME and pass in a valid ctime value. Reported-by:
Eric Blake <ebb9@byu.net> Signed-off-by:
-
Christoph Hellwig authored
commit b44b1126 upstream Add an assert for inodes not added to the inode cache in xfs_ireclaim, to make sure we're not going to introduce something like the famous nfsd inode cache bug again. Signed-off-by:
-
Jason Gunthorpe authored
commit 44a743f6 upstream Noticed that through glibc fallocate would return 28 rather than -1 and errno = 28 for ENOSPC. The xfs routines uses XFS_ERROR format positive return error codes while the syscalls use negative return codes. Fixup the two cases in xfs_vn_fallocate syscall to convert to negative. Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by:
Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
-
Andy Poling authored
commit fc5bc4c8 upstream Summary of problem: If a journal record wraps at the physical end of the journal, it has to be read in two parts in xlog_do_recovery_pass(): a read at the physical end and a read at the physical beginning. If xlog_bread() has to re-align the first read, the second read request does not take that re-alignment into account. If the first read was re-aligned, the second read over-writes the end of the data from the first read, effectively corrupting it. This can happen either when reading the record header or reading the record data. The first sanity check in xlog_recover_process_data() is to check for a valid clientid, so that is the error reported. Summary of fix: If there was a first read at the physical end, XFS_BUF_PTR() returns where the data was requested to begin. Conversely, because it is the result of xlog_align(), offset indicates where the requested data for the first read actually begins - whether or not xlog_bread() has re-aligned it. Using offset as the base for the calculation of where to place the second read data ensures that it will be correctly placed immediately following the data from the first read instead of sometimes over-writing the end of it. The attached patch has resolved the reported problem of occasional inability to recover the journal (reporting "bad clientid"). Signed-off-by:
Andy Poling <andy@realbig.com> Reviewed-by:
-
Christoph Hellwig authored
commit 80641dc6 upstream When completing I/O requests we must not allow the memory allocator to recurse into the filesystem, as we might deadlock on waiting for the I/O completion otherwise. The only thing currently allocating normal GFP_KERNEL memory is the allocation of the transaction structure for the unwritten extent conversion. Add a memflags argument to _xfs_trans_alloc to allow controlling the allocator behaviour. Signed-off-by:
Thomas Neumann <tneumann@users.sourceforge.net> Tested-by:
-
Christoph Hellwig authored
commit c56c9631 upstream When xfs_free_eofblocks is called from ->release the VM might already hold the mmap_sem, but in the write path we take the iolock before taking the mmap_sem in the generic write code. Switch xfs_free_eofblocks to only trylock the iolock if called from ->release and skip trimming the prellocated blocks in that case. We'll still free them later on the final iput. Signed-off-by:
-
Christoph Hellwig authored
commit 848ce8f7 upstream Currently the reclaim code for the case where we don't reclaim the final reclaim is overly complicated. We know that the inode is clean but instead of just directly reclaiming the clean inode we go through the whole process of marking the inode reclaimable just to directly reclaim it from the calling context. Besides being overly complicated this introduces a race where iget could recycle an inode between marked reclaimable and actually being reclaimed leading to panics. This patch gets rid of the existing reclaim path, and replaces it with a simple call to xfs_ireclaim if the inode was clean. While we're at it we also use the slightly more lax xfs_inode_clean check we'd use later to determine if we need to flush the inode here. Finally get rid of xfs_reclaim function and place the remaining small bits of reclaim code directly into xfs_fs_destroy_inode. Signed-off-by:
Tommy van Leeuwen <tommy@news-service.com> Tested-by:
-
Chris Wilson authored
commit da584058 upstream. Replace a BUG_ON with an error code in the event that the inode mapping changes between calls to drm_open. This may happen for instance if udev is loaded subsequent to the original opening of the device: [ 644.291870] kernel BUG at drivers/gpu/drm/drm_fops.c:146! [ 644.291876] invalid opcode: 0000 [#1] SMP [ 644.291882] last sysfs file: /sys/kernel/uevent_seqnum [ 644.291888] [ 644.291895] Pid: 7276, comm: lt-cairo-test-s Not tainted 2.6.34-rc1 #2 N150/N210/N220 /N150/N210/N220 [ 644.291903] EIP: 0060:[<c11c70e3>] EFLAGS: 00210283 CPU: 0 [ 644.291912] EIP is at drm_open+0x4b1/0x4e2 [ 644.291918] EAX: f72d8d18 EBX: f790a400 ECX: f73176b8 EDX: 00000000 [ 644.291923] ESI: f790a414 EDI: f790a414 EBP: f647ae20 ESP: f647adfc [ 644.291929] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 644.291937] Process lt-cairo-test-s (pid: 7276, ti=f647a000 task=f73f5c80 task.ti=f647a000) [ 644.291941] Stack: [ 644.291945] 00000000 f7bb7400 00000080 f6451100 f73176b8 f6479214 f6451100 f73176b8 [ 644.291957] <0> c1297ce0 f647ae34 c11c6c04 f73176b8 f7949800 00000000 f647ae54 c1080ac5 [ 644.291969] <0> f7949800 f6451100 00000000 f6451100 f73176b8 f6452780 f647ae70 c107d1e6 [ 644.291982] Call Trace: [ 644.291991] [<c11c6c04>] ? drm_stub_open+0x8a/0xb8 [ 644.292000] [<c1080ac5>] ? chrdev_open+0xef/0x106 [ 644.292008] [<c107d1e6>] ? __dentry_open+0xd4/0x1a6 [ 644.292015] [<c107d35b>] ? nameidata_to_filp+0x31/0x45 [ 644.292022] [<c10809d6>] ? chrdev_open+0x0/0x106 [ 644.292030] [<c10864e2>] ? do_last+0x346/0x423 [ 644.292037] [<c108789f>] ? do_filp_open+0x190/0x415 [ 644.292046] [<c1071eb5>] ? handle_mm_fault+0x214/0x710 [ 644.292053] [<c107d008>] ? do_sys_open+0x4d/0xe9 [ 644.292061] [<c1016462>] ? do_page_fault+0x211/0x23f [ 644.292068] [<c107d0f0>] ? sys_open+0x23/0x2b [ 644.292075] [<c1002650>] ? sysenter_do_call+0x12/0x26 [ 644.292079] Code: 89 f0 89 55 dc e8 8d 96 0a 00 8b 45 e0 8b 55 dc 83 78 04 01 75 28 8b 83 18 02 00 00 85 c0 74 0f 8b 4d ec 3b 81 ac 00 00 00 74 13 <0f> 0b eb fe 8b 4d ec 8b 81 ac 00 00 00 89 83 18 02 00 00 89 f0 [ 644.292143] EIP: [<c11c70e3>] drm_open+0x4b1/0x4e2 SS:ESP 0068:f647adfc [ 644.292175] ---[ end trace 2ddd476af89a60fa ]--- Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 15f72077 upstream. Based on ddx patch by Andrzej Hajda. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Dave Airlie authored
commit 97f23b3d upstream. We can get this if the user moves the mouse when we are waiting to move some stuff around in the validate. Don't fail. Signed-off-by:
-
Oleg Nesterov authored
commit b95c35e7 upstream. proc_oom_score(task) has a reference to task_struct, but that is all. If this task was already released before we take tasklist_lock - we can't use task->group_leader, it points to nowhere - it is not safe to call badness() even if this task is ->group_leader, has_intersects_mems_allowed() assumes it is safe to iterate over ->thread_group list. - even worse, badness() can hit ->signal == NULL Add the pid_alive() check to ensure __unhash_process() was not called. Also, use "task" instead of task->group_leader. badness() should return the same result for any sub-thread. Currently this is not true, but this should be changed anyway. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Nikolaus Schulz authored
commit 30d1872d upstream. When using the string representation of a random counter as part of the base name, ensure that it is no longer than 4 bytes. Since we are repeatedly decrementing the counter in a loop until we have found a unique base name, the counter may wrap around zero; therefore, it is not enough to mask its higher bits before entering the loop, this must be done inside the loop. [hirofumi@mail.parknet.co.jp: use snprintf()] Signed-off-by:
Nikolaus Schulz <microschulz@web.de> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Zhao Yakui authored
commit 72539832 upstream. Now the EDID property will be updated when the corresponding EDID can be obtained from the external display device. But after the external device is plugged-out, the EDID property is not updated. In such case we still get the corresponding EDID property although it is already detected as disconnected. https://bugs.freedesktop.org/show_bug.cgi?id=26743Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Alex Deucher authored
commit 338e2b1d upstream. This should go to 2.6.33 stable as well. Signed-off-by:
-
Ben Skeggs authored
commit 44fef224 upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
- 01 Apr, 2010 7 commits
-
-
Greg Kroah-Hartman authored
-
Sachin Prabhu authored
commit 720e7749 upstream. gfs2_lock() will skip locks on file which have mode set to 02666. This is a problem in cases where the mode of the file is changed after a process has obtained a lock on the file. Such a lock will be skipped and will result in a BUG in locks_remove_flock(). gfs2_lock() should skip the check for mandatory locks when unlocking a file. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
-
Dimitri Sivanich authored
commit 14be1f74 upstream. On UV systems, the TSC is not synchronized across blades. The sched_clock_cpu() function is returning values that can go backwards (I've seen as much as 8 seconds) when switching between cpus. As each cpu comes up, early_init_intel() will currently set the sched_clock_stable flag true. When mark_tsc_unstable() runs, it clears the flag, but this only occurs once (the first time a cpu comes up whose TSC is not synchronized with cpu 0). After this, early_init_intel() will set the flag again as the next cpu comes up. Only set sched_clock_stable if tsc has not been marked unstable. Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Acked-by:
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100301174815.GC8224@sgi.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Lars-Peter Clausen authored
commit c212808a upstream. If no platform_data was givin to the device it's going to use it's default platform data struct which has all fields initialized to zero. As a result the driver is going to try to request gpio0 both as write protect and card detect pin. Which of course will fail and makes the driver unusable Previously to the introduction of no_wprotect and no_detect the behavior was to assume that if no platform data was given there is no write protect or card detect pin. This patch restores that behavior. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Martin K. Petersen authored
block: Backport of various I/O topology fixes from 2.6.33 and 2.6.34 The stacking code incorrectly scaled up the data offset in some cases causing misaligned devices to report alignment. Rewrite the stacking algorithm to remedy this. (Upstream commit 9504e086) The top device misalignment flag would not be set if the added bottom device was already misaligned as opposed to causing a stacking failure. Also massage the reporting so that an error is only returned if adding the bottom device caused the misalignment. I.e. don't return an error if the top is already flagged as misaligned. (Upstream commit fe0b393f) lcm() was defined to take integer-sized arguments. The supplied arguments are multiplied, however, causing us to overflow given sufficiently large input. That in turn led to incorrect optimal I/O size reporting in some cases. Switch lcm() over to unsigned long similar to gcd() and move the function from blk-settings.c to lib. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Michael Buesch authored
commit 96869a39 upstream The TKIP key update callback is called from the RX path, where the driver mutex is already locked. This results in a circular locking bug. Avoid this by removing the lock. Johannes noted that there is a separate bug: The callback still breaks on SDIO hardware, because SDIO hardware access needs to sleep, but we are not allowed to sleep in the callback due to mac80211's RCU locking. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-by: kecsa@kutfo.hit.bme.hu Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
commit 319c2cc7 upstream. Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
