- 17 Jul, 2022 1 commit
-
-
Maximilian Luz authored
The sources.count field is a __le32 inside a packed struct. So use the proper functions to access it. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 9f794056 ("platform/surface: Add KIP/POS tablet-mode switch driver") Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20220717120735.2052160-1-luzmaximilian@gmail.comReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 14 Jul, 2022 12 commits
-
-
Vadim Pasternak authored
Add documentation for the new attributes: - "asic2_health" - health of 2-nd ASIC for system equipped with two ASICs. - "asic_reset" and "asic2_reset" - ASICs reset control. - "comm_chnl_ready" - communication channel indication to remote end (BMC). - "config3" - indication of system minor BOM changes. Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-10-vadimp@nvidia.comReviewed-by:
-
Vadim Pasternak authored
Fix e-mail in contact fields. Signed-off-by:
-
Vadim Pasternak authored
Add lock to protect user read/write access to the registers. Signed-off-by:
-
Vadim Pasternak authored
Extend COME CPLD with board configuration register for getting board revision. The value of this register is pushed by hardware through GPIO pins. The purpose of it is to expose some minor BOM changes. Signed-off-by:
Oleksandr Shamray <oleksandrs@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-7-vadimp@nvidia.comReviewed-by:
-
Vadim Pasternak authored
Add support for new system type XH3000, which is a water cooling Ethernet switch blade equipped with 32x200G Ethernet ports. The system is recognized by "DMI_BOARD_NAME" and "DMI_PRODUCT_SKU" matches, when these fields are set to "VMOD0005" and "HI139" respectively. Signed-off-by:
Felix Radensky <fradensky@nvidia.com> Link: https://lore.kernel.org/r/20220711084559.62447-6-vadimp@nvidia.comReviewed-by:
-
Vadim Pasternak authored
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis The Vulcan is chassis containing Nvidia's Hopper dGPU (GH100), NVswitch (LS10) based HGX baseboard and COMe NVSwitch management module. The system is built for artificial intelligence and accelerated analytics applications. Vulcan is offered as an HGX product to cloud service providers and OEMs, who intend to build fully interconnected GPU systems for large scale deployments. Driver is extended to support new COMe NVSwitch management module. Signed-off-by:
-
Vadim Pasternak authored
Motivation is to support new systems equipped with two ASICs. Extend driver with: - The second ASIC health event. - Per ASIC reset control, triggering reset of ASIC internal resources and restarting ASIC initialization flow. Signed-off-by:
-
Vadim Pasternak authored
Align the first argument with open parenthesis for platform_device_register_resndata() calls. Signed-off-by:
-
Vadim Pasternak authored
Current assumption in driver that any system is capable of LED, hotplug or watchdog support. It could be not true for some new coming systems. Add validation for LED, hotplug, watchdog configuration and skip activation of relevant drivers if not configured. Signed-off-by:
-
PaddyKP_Yao authored
In some new ASUS devices, hotkey Fn+F13 is used for mic mute. If mic-mute LED is present by checking WMI ASUS_WMI_DEVID_MICMUTE_LED, we will add a mic-mute LED classdev, asus::micmute, in the asus-wmi driver to control it. The binding of mic-mute LED controls will be swithched with LED trigger. Signed-off-by:
PaddyKP_Yao <PaddyKP_Yao@asus.com> Link: https://lore.kernel.org/r/20220711115125.2072508-1-PaddyKP_Yao@asus.comReviewed-by:
-
Lukas Bulwahn authored
Commit 9f794056 ("platform/surface: Add KIP/POS tablet-mode switch driver") adds the section MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH with a file entry, but the file that is added with this commit is actually named slightly differently. file entry name: drivers/platform/surface/surface_aggregator_tablet_switch.c added file name: drivers/platform/surface/surface_aggregator_tabletsw.c Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file entry to the actual file name added with the commit above. Fixes: 9f794056 ("platform/surface: Add KIP/POS tablet-mode switch driver") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
-
Hans de Goede authored
Commit 3a0cf7ab ("ACPI: video: Change how we determine if brightness key-presses are handled") made acpi_video_handles_brightness_key_presses() report false when none of the ACPI Video Devices support backlight control. But it turns out that at least on a Dell Inspiron N4010 there is no ACPI backlight control, yet brightness hotkeys are still reported through the ACPI Video Bus; and since acpi_video_handles_brightness_key_presses() now returns false, brightness keypresses are now reported twice. To fix this rename the has_backlight flag to may_report_brightness_keys and also set it the first time a brightness key press event is received. Depending on the delivery of the other ACPI (WMI) event vs the ACPI Video Bus event this means that the first brightness key press might still get reported twice, but all further keypresses will be filtered as before. Note that this relies on other drivers reporting brightness key events calling acpi_video_handles_brightness_key_presses() when delivering the events (rather then once during driver probe). This is already required and documented in include/acpi/video.h: /* * Note: The value returned by acpi_video_handles_brightness_key_presses() * may change over time and should not be cached. */ Fixes: 3a0cf7ab ("ACPI: video: Change how we determine if brightness key-presses are handled") Link: https://lore.kernel.org/regressions/CALF=6jEe5G8+r1Wo0vvz4GjNQQhdkLT5p8uCHn6ZXhg4nsOWow@mail.gmail.com/Reported-and-tested-by:
Ben Greening <bgreening@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220713211101.85547-2-hdegoede@redhat.com
-
- 10 Jul, 2022 12 commits
-
-
Hans de Goede authored
Like the Asus T100TA the Asus T100TAF has a camera LED which is always on by default and both also use the same GPIO for the LED. Relax the DMI match for the Asus T100TA so that it also matches the T100TAF. Signed-off-by:
-
Andy Shevchenko authored
It's easier to maintain the sorted table. Keep the sorting order in sync with one in drivers/acpi/scan.c. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Andy Shevchenko authored
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. Signed-off-by:
-
Andy Shevchenko authored
Use more natural while (i--) patter to clean up allocated resources. Signed-off-by:
-
Andy Shevchenko authored
Drop duplicate print of returned value in the messages and use pattern return dev_err_probe(...) where it's possible. Signed-off-by:
-
Andy Shevchenko authored
The device_get_match_data() checks for firmware node to be present, there is no need to check for ACPI companion. Signed-off-by:
-
Andy Shevchenko authored
Instead of calling specific resource counter, let just probe each of the type and see what it says. Return -ENOENT if no resources found. Signed-off-by:
-
Hans de Goede authored
A recent suggested change to the IFS code has shown that the userspace API needs a bit more work, see: https://lore.kernel.org/platform-driver-x86/20220708151938.986530-1-jithu.joseph@intel.com/ Mark it as BROKEN before 5.19 ships, to give ourselves one more kernel-devel cycle to get the userspace API right. Link: https://lore.kernel.org/platform-driver-x86/20220708151938.986530-1-jithu.joseph@intel.com/ Cc: Jithu Joseph <jithu.joseph@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Tony Luck <tony.luck@intel.com> Suggested-by:
Greg KH <gregkh@linuxfoundation.org> Signed-off-by:
-
Misaka19465 authored
On laptops like ASUS TUF Gaming A15, which have hotkeys to start Armoury Crate or AURA Sync, these hotkeys are unavailable. This patch add mappings for them. Signed-off-by:
Misaka19465 <misaka19465@olddoctor.net> Link: https://lore.kernel.org/r/20220710113727.281634-1-misaka19465@olddoctor.netReviewed-by:
-
Hans de Goede authored
Commit 98f30d0e ("ACPI: power: Switch to sys-off handler API") switched the ACPI sleep code from directly setting the old global pm_power_off handler to using the new register_sys_off_handler() mechanism with a priority of SYS_OFF_PRIO_FIRMWARE. This is a problem when the old global pm_power_off handler would later be overwritten, such as done by the late_initcall(efi_shutdown_init): if (efi_poweroff_required()) pm_power_off = efi_power_off; The old global pm_power_off handler gets run with a priority of SYS_OFF_PRIO_DEFAULT which is lower then SYS_OFF_PRIO_FIRMWARE, causing acpi_power_off() to run first, changing the behavior from before the ACPI sleep code switched to the new register_sys_off_handler(). Switch the registering of efi_power_off over to register_sys_off_handler() with a priority of SYS_OFF_PRIO_FIRMWARE + 1 so that it will run before acpi_power_off() as before. Note since the new sys-off-handler code will try all handlers in priority order, there is no more need for the EFI code to store and call the original pm_power_off handler. Fixes: 98f30d0e ("ACPI: power: Switch to sys-off handler API") Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220708131412.81078-3-hdegoede@redhat.com
-
Hans de Goede authored
Commit 98f30d0e ("ACPI: power: Switch to sys-off handler API") switched the ACPI sleep code from directly setting the old global pm_power_off handler to using the new register_sys_off_handler() mechanism with a priority of SYS_OFF_PRIO_FIRMWARE. This is a problem in special cases where the old global pm_power_off handler later gets overwritten, such as the Lenovo Tab2 poweroff bugfix in x86-android-tablets. The old global pm_power_off handler gets run with a priority of SYS_OFF_PRIO_DEFAULT which is lower then SYS_OFF_PRIO_FIRMWARE, causing the troublesome ACPI poweroff (which freezes the system) to run first. Switch the registering of lenovo_yoga_tab2_830_1050_power_off over to register_sys_off_handler() with a priority of SYS_OFF_PRIO_FIRMWARE + 1 so that it will run before acpi_power_off() to fix this. Fixes: 98f30d0e ("ACPI: power: Switch to sys-off handler API") Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
Pär Eriksson authored
Add support for the B660I AORUS PRO DDR4. Signed-off-by:
Pär Eriksson <parherman@gmail.com> Link: https://lore.kernel.org/r/20220705184407.14181-1-parherman@gmail.comSigned-off-by:
-
- 08 Jul, 2022 3 commits
-
-
Shyam Sundar S K authored
PMC driver can be supported on a new upcoming platform. Add this information to the support list. Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20220630050324.3780654-2-Shyam-sundar.S-k@amd.comReviewed-by:
-
Shyam Sundar S K authored
New version of PMC controller will have a separate ACPI id, add that to the support list. Signed-off-by:
-
Gayatri Kammela authored
Add PCI error recovery support for Intel PMT driver to recover from PCI fatal errors Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: David E Box <david.e.box@intel.com> Signed-off-by:
Gayatri Kammela <gayatri.kammela@linux.intel.com> Link: https://lore.kernel.org/r/20220629221334.434307-5-gayatri.kammela@linux.intel.comReviewed-by:
-
- 02 Jul, 2022 11 commits
-
-
David E. Box authored
Use the telem_type and the fixed block guid to determine if an entry is a fixed region. For certain platforms we don't support this. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Signed-off-by:
-
David E. Box authored
Add Raptor Lake support to Intel's PMT driver. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by:
-
David E. Box authored
In the Intel VSEC PCI driver, use a new VSEC_QUIRK_EARLY_HW flag in driver_data to indicate the need for early hardware quirks in auxiliary devices. Remove the separate PCI ID list maintained by the Intel PMT auxiliary driver. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by:
-
Srinivas Pandruvada authored
On a multiple package system using Sub-NUMA clustering, there is an issue in mapping Linux CPU number to PUNIT PCI device when manufacturer decided to reuse the PCI bus number across packages. Bus number can be reused as long as they are in different domain or segment. In this case some CPU will fail to find a PCI device to issue SST requests. When bus numbers are reused across CPU packages, we are using proximity information by matching CPU numa node id to PUNIT PCI device numa node id. But on a package there can be only one PUNIT PCI device, but multiple numa nodes (one for each sub cluster). So, the numa node ID of the PUNIT PCI device can only match with one numa node id of CPUs in a sub cluster in the package. Since there can be only one PUNIT PCI device per package, if we match with numa node id of any sub cluster in that package, we can use that mapping for any CPU in that package. So, store the match information in a per package data structure and return the information when there is no match. While here, use defines for max bus number instead of hardcoding. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220629194817.2418240-1-srinivas.pandruvada@linux.intel.comReviewed-by:
-
Maximilian Luz authored
Update the copyright of various Surface drivers to the current year. Signed-off-by:
-
Maximilian Luz authored
Split out subsystem device hub drivers into their own module. This allows us to load the hub drivers separately from the registry, which will help future DT/OF support. While doing so, also remove a small bit of code duplication. Signed-off-by:
-
Maximilian Luz authored
Move helper functions for client device registration to the core module. This simplifies addition of future DT/OF support and also allows us to split out the device hub drivers into their own module. At the same time, also improve device node validation a bit by not silently skipping devices with invalid device UID specifiers. Further, ensure proper lifetime management for the firmware/software nodes associated with the added devices. Signed-off-by:
-
Maximilian Luz authored
Add a POS subsystem tablet-mode switch device for the Surface Laptop Studio. The respective driver for this device provides SW_TABLET_MODE input events for user-space based on the posture of the screen. Signed-off-by:
-
Maximilian Luz authored
Add a KIP subsystem tablet-mode switch device for the Surface Pro 8. The respective driver for this device provides SW_TABLET_MODE input events for user-space based on the state of the keyboard cover (e.g. detached, folded-back, normal/laptop mode). Signed-off-by:
-
Maximilian Luz authored
Add a driver providing a tablet-mode switch input device for Microsoft Surface devices using the Surface Aggregator KIP subsystem (to manage detachable peripherals) or POS subsystem (to obtain device posture information). The KIP (full name unknown, abbreviation found through reverse engineering) subsystem is used on the Surface Pro 8 and Surface Pro X to manage the keyboard cover. Among other things, it provides information on the positioning (posture) of the cover (closed, laptop-style, detached, folded-back, ...), which can be used to implement an input device providing the SW_TABLET_MODE event. Similarly, the POS (posture information) subsystem provides such information on the Surface Laptop Studio, with the difference being that the keyboard is not detachable. As implementing the tablet-mode switch for both subsystems is largely similar, the driver proposed in this commit, in large, acts as a generic tablet mode switch driver framework for the Surface Aggregator Module. Specific implementations using this framework are provided for the KIP and POS subsystems, adding tablet-mode switch support to the aforementioned devices. A few more notes on the Surface Laptop Studio: A peculiarity of the Surface Laptop Studio is its "slate/tent" mode (symbolized: user> _/\). In this mode, the screen covers the keyboard but leaves the touchpad exposed. This is essentially a mode in-between tablet and laptop, and it is debatable whether tablet-mode should be enabled in this mode. We therefore let the user decide this via a module parameter. In particular, tablet-mode may bring up the on-screen touch keyboard more easily, which would be desirable in this mode. However, some user-space software currently also decides to disable keyboard and, more importantly, touchpad input, while the touchpad is still accessible in the "slate/tent" mode. Furthermore, this mode shares its identifier with "slate/flipped" mode where the screen is flipped 180° and the keyboard points away from the user (symbolized: user> /_). In this mode we would like to enable auto-rotation, something that user-space software may only do when tablet-mode is enabled. We therefore default to the slate-mode enabling the tablet-mode switch. Signed-off-by:
-
Maximilian Luz authored
Add helper macros for synchronous stack-allocated Surface Aggregator request with both argument and return value, similar to the current argument-only and return-value-only ones. Signed-off-by:
-
- 28 Jun, 2022 1 commit
-
-
Kai-Heng Feng authored
After system resume the hp-wmi driver may complain: [ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0 According to HP it means 'Sanitization Mode' and it's harmless to just ignore the event. Cc: Jorge Lopez <jorge.lopez2@hp.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.comReviewed-by:
-
