Dump the content of the packet when a test finds that packets are
received out of order, the length is wrong, or some other packet
error. Use the already existing pkt_dump function for this and call it
when the above errors are detected. Get rid of the command line option
for dumping packets as it is not useful to print out thousands of
good packets followed by the faulty one you would like to see.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-5-magnus.karlsson@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add a varying payload pattern within the packet. Instead of having
just a packet number that is the same for all words in a packet, make
each word different in the packet. The upper 16-bits are set to the
packet number and the lower 16-bits are the sequence number of the
words in this packet. So the 3rd packet's 5th 32-bit word of data will
contain the number (2<<32) | 4 as they are numbered from 0.

This will make it easier to detect fragments that are out of order
when starting to test multi-buffer support.

The member payload in the packet is renamed pkt_nb to reflect that it
is now only a pkt_nb, not the real payload as seen above.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-4-magnus.karlsson@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Implement support for generating pkts with variable length. Before
this patch, they were all 64 bytes, exception for some packets of zero
length and some that were too large. This feature will be used to test
multi-buffer support for which large packets are needed.

The packets are also made simpler, just a valid Ethernet header
followed by a sequence number. This so that it will become easier to
implement packet generation when each packet consists of multiple
fragments. There is also a maintenance burden associated with carrying
all this code for generating proper UDP/IP packets, especially since
they are not needed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-3-magnus.karlsson@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Do not change the XDP program for the Tx thread when not needed. It
was erroneously compared to the XDP program for the Rx thread, which
is always going to be different, which meant that the code made
unnecessary switches to the same program it had before. This did not
affect functionality, just performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-2-magnus.karlsson@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Jiri Olsa says:

====================
hi,
I noticed several times in discussions that we should move test kfuncs
into kernel module, now perhaps even more pressing with all the kfunc
effort. This patchset moves all the test kfuncs into bpf_testmod.

I added bpf_testmod/bpf_testmod_kfunc.h header that is shared between
bpf_testmod kernel module and BPF programs.

v4 changes:
  - s390 supports long calls [1] now, so it can call now kfuncs from module [Ilya]
  - added acks [David]
  - cleanups for ptr_to_u64 function [David]
  - use relative path for bpf_testmod_kfunc.h include [Andrii]
  - new libbpf fix (patch 1) for gen_loader

v3 changes:
  - added acks [David]
  - added bpf_testmod.ko make dependency for bpf test progs [David]
  - better handling of __ksym and refcount_t in bpf_testmod_kfunc.h [David]
  - removed 'extern' from kfuncs declarations [David]
  - typo in header guard macro [David]
  - use only stdout in un/load_bpf_testmod

v2 changes:
  - add 74bc3a5a into bpf-next/master CI, so the test would pass
    https://github.com/kernel-patches/vmtest/pull/192
  - remove extra externs [Artem]
  - using un/load_bpf_testmod in other tests
  - rebased

thanks,
jirka

[1] 1cf3bfc6 bpf: Support 64-bit pointers to kfuncs
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Moving kernel test kfuncs into bpf_testmod kernel module, and adding
necessary init calls and BTF IDs records.

We need to keep following structs in kernel:
  struct prog_test_ref_kfunc
  struct prog_test_member (embedded in prog_test_ref_kfunc)

The reason is because they need to be marked as rcu safe (check test
prog mark_ref_as_untrusted_or_null) and such objects are being required
to be defined only in kernel at the moment (see rcu_safe_kptr check
in kernel).

We need to keep also dtor functions for both objects in kernel:
  bpf_kfunc_call_test_release
  bpf_kfunc_call_memb_release

We also keep the copy of these struct in bpf_testmod_kfunc.h, because
other test functions use them. This is unfortunate, but this is just
temporary solution until we are able to these structs them to bpf_testmod
completely.

As suggested by David adding bpf_testmod.ko make dependency for
bpf programs, so they are rebuilt if we change the bpf_testmod.ko
module.

Also adding missing __bpf_kfunc to bpf_kfunc_call_test4 functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230515133756.1658301-11-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

There's no need to keep the extern in kfuncs declarations.
Suggested-by: David Vernet <void@manifault.com>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-10-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Currently the test_verifier allows test to specify kfunc symbol
and search for it in the kernel BTF.

Adding the possibility to search for kfunc also in bpf_testmod
module when it's not found in kernel BTF.

To find bpf_testmod btf we need to get back SYS_ADMIN cap.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-9-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Loading bpf_testmod kernel module for verifier test. We will
move all the tests kfuncs into bpf_testmod in following change.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-8-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Now that we have un/load_bpf_testmod helpers in testing_helpers.h,
we can use it in other tests and save some lines.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-7-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Do not unload bpf_testmod in load_bpf_testmod, instead call
unload_bpf_testmod separatelly.

This way we will be able use un/load_bpf_testmod functions
in other tests that un/load bpf_testmod module.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-6-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We are about to use un/load_bpf_testmod functions in couple tests
and it's better  to print output to stdout,  so it's aligned with
tests ASSERT macros output, which use stdout as well.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-5-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Moving test_progs helpers to testing_helpers object so they can be
used from test_verifier in following changes.

Also adding missing ifndef header guard to testing_helpers.h header.

Using stderr instead of env.stderr because un/load_bpf_testmod helpers
will be used outside test_progs. Also at the point of calling them
in test_progs the std files are not hijacked yet and stderr is the
same as env.stderr.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-4-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Move all kfunc exports into separate bpf_testmod_kfunc.h header file
and include it in tests that need it.

We will move all test kfuncs into bpf_testmod in following change,
so it's convenient to have declarations in single place.

The bpf_testmod_kfunc.h is included by both bpf_testmod and bpf
programs that use test kfuncs.

As suggested by David, the bpf_testmod_kfunc.h includes vmlinux.h
and bpf/bpf_helpers.h for bpf programs build, so the declarations
have proper __ksym attribute and we can resolve all the structs.

Note in kfunc_call_test_subprog.c we can no longer use the sk_state
define from bpf_tcp_helpers.h (because it clashed with vmlinux.h)
and we need to address __sk_common.skc_state field directly.
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-3-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When moving some of the test kfuncs to bpf_testmod I hit an issue
when some of the kfuncs that object uses are in module and some
in vmlinux.

The problem is that both vmlinux and module kfuncs get allocated
btf_fd_idx index into fd_array, but we store to it the BTF fd value
only for module's kfunc, not vmlinux's one because (it's zero).

Then after the program is loaded we check if fd_array[btf_fd_idx] != 0
and close the fd.

When the object has kfuncs from both vmlinux and module, the fd from
fd_array[btf_fd_idx] from previous load will be stored in there for
vmlinux's kfunc, so we close unrelated fd (of the program we just
loaded in my case).

Fixing this by storing zero to fd_array[btf_fd_idx] for vmlinux
kfuncs, so the we won't close stale fd.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230515133756.1658301-2-jolsa@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

llvm patch [1] enabled cross-function optimization for func arguments
(ArgumentPromotion) at -O2 level. And this caused s390 sock_fields
test failure ([2]). The failure is gone right now as patch [1] was
reverted in [3]. But it is possible that patch [3] will be reverted
again and then the test failure in [2] will show up again. So it is
desirable to fix the failure regardless.

The following is an analysis why sock_field test fails with
llvm patch [1].

The main problem is in
  static __noinline bool sk_dst_port__load_word(struct bpf_sock *sk)
  {
        __u32 *word = (__u32 *)&sk->dst_port;
        return word[0] == bpf_htons(0xcafe);
  }
  static __noinline bool sk_dst_port__load_half(struct bpf_sock *sk)
  {
        __u16 *half = (__u16 *)&sk->dst_port;
        return half[0] == bpf_htons(0xcafe);
  }
  ...
  int read_sk_dst_port(struct __sk_buff *skb)
  {
	...
        sk = skb->sk;
	...
        if (!sk_dst_port__load_word(sk))
                RET_LOG();
        if (!sk_dst_port__load_half(sk))
                RET_LOG();
	...
  }

Through some cross-function optimization by ArgumentPromotion
optimization, the compiler does:
  static __noinline bool sk_dst_port__load_word(__u32 word_val)
  {
        return word_val == bpf_htons(0xcafe);
  }
  static __noinline bool sk_dst_port__load_half(__u16 half_val)
  {
        return half_val == bpf_htons(0xcafe);
  }
  ...
  int read_sk_dst_port(struct __sk_buff *skb)
  {
        ...
        sk = skb->sk;
        ...
        __u32 *word = (__u32 *)&sk->dst_port;
        __u32 word_val = word[0];
        ...
        if (!sk_dst_port__load_word(word_val))
                RET_LOG();

        __u16 half_val = word_val >> 16;
        if (!sk_dst_port__load_half(half_val))
                RET_LOG();
        ...
  }

In current uapi bpf.h, we have
  struct bpf_sock {
	...
        __be16 dst_port;        /* network byte order */
        __u16 :16;              /* zero padding */
	...
  };
But the old kernel (e.g., 5.6) we have
  struct bpf_sock {
	...
	__u32 dst_port;         /* network byte order */
	...
  };

So for backward compatability reason, 4-byte load of
dst_port is converted to 2-byte load internally.
Specifically, 'word_val = word[0]' is replaced by 2-byte load
by the verifier and this caused the trouble for later
sk_dst_port__load_half() where half_val becomes 0.

Typical usr program won't have such a code pattern tiggering
the above bug, so let us fix the test failure with source
code change. Adding an empty asm volatile statement seems
enough to prevent undesired transformation.

  [1] https://reviews.llvm.org/D148269
  [2] https://lore.kernel.org/bpf/e7f2c5e8-a50c-198d-8f95-388165f1e4fd@meta.com/
  [3] https://reviews.llvm.org/rG141be5c062ecf22bd287afffd310e8ac4711444aTested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230516214945.1013578-1-yhs@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Change netcnt to demand at least 10K packets, as we frequently see some
stray packet arriving during the test in BPF CI. It seems more important
to make sure we haven't lost any packet than enforcing exact number of
packets.

Cc: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230515204833.2832000-1-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit b2cbac9b.

We have multiple reports of obvious breakage from this patch.
Reported-by: Ido Schimmel <idosch@idosch.org>
Link: https://lore.kernel.org/all/ZGIRWjNcfqI8yY8W@shredder/
Link: https://lore.kernel.org/all/CADJHv_sDK=0RrMA2FTZQV5fw7UQ+qY=HG21Wu5qb0V9vvx5w6A@mail.gmail.com/
Reported-by: syzbot+a5e719ac7c268e414c95@syzkaller.appspotmail.com
Reported-by: syzbot+a03fd670838d927d9cd8@syzkaller.appspotmail.com
Fixes: b2cbac9b ("net: Remove low_thresh in ip defrag")
Link: https://lore.kernel.org/r/20230517034112.1261835-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-05-16

We've added 57 non-merge commits during the last 19 day(s) which contain
a total of 63 files changed, 3293 insertions(+), 690 deletions(-).

The main changes are:

1) Add precision propagation to verifier for subprogs and callbacks,
   from Andrii Nakryiko.

2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths,
   from Stanislav Fomichev.

3) Utilize pahole v1.25 for the kernel's BTF generation to filter out
   inconsistent function prototypes, from Alan Maguire.

4) Various dyn-pointer verifier improvements to relax restrictions,
   from Daniel Rosenberg.

5) Add a new bpf_task_under_cgroup() kfunc for designated task,
   from Feng Zhou.

6) Unblock tests for arm64 BPF CI after ftrace supporting direct call,
   from Florent Revest.

7) Add XDP hint kfunc metadata for RX hash/timestamp for igc,
   from Jesper Dangaard Brouer.

8) Add several new dyn-pointer kfuncs to ease their usability,
   from Joanne Koong.

9) Add in-depth LRU internals description and dot function graph,
   from Joe Stringer.

10) Fix KCSAN report on bpf_lru_list when accessing node->ref,
    from Martin KaFai Lau.

11) Only dump unprivileged_bpf_disabled log warning upon write,
    from Kui-Feng Lee.

12) Extend test_progs to directly passing allow/denylist file,
    from Stephen Veiss.

13) Fix BPF trampoline memleak upon failure attaching to fentry,
    from Yafang Shao.

14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF,
    from Yonghong Song.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits)
  bpf: Fix memleak due to fentry attach failure
  bpf: Remove bpf trampoline selector
  bpf, arm64: Support struct arguments in the BPF trampoline
  bpftool: JIT limited misreported as negative value on aarch64
  bpf: fix calculation of subseq_idx during precision backtracking
  bpf: Remove anonymous union in bpf_kfunc_call_arg_meta
  bpf: Document EFAULT changes for sockopt
  selftests/bpf: Correctly handle optlen > 4096
  selftests/bpf: Update EFAULT {g,s}etsockopt selftests
  bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
  libbpf: fix offsetof() and container_of() to work with CO-RE
  bpf: Address KCSAN report on bpf_lru_list
  bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25
  selftests/bpf: Accept mem from dynptr in helper funcs
  bpf: verifier: Accept dynptr mem as mem in helpers
  selftests/bpf: Check overflow in optional buffer
  selftests/bpf: Test allowing NULL buffer in dynptr slice
  bpf: Allow NULL buffers in bpf_dynptr_slice(_rw)
  selftests/bpf: Add testcase for bpf_task_under_cgroup
  bpf: Add bpf_task_under_cgroup() kfunc
  ...
====================

Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Bagas Sanjaya says:

====================
SPDX conversion for bonding, 8390, and i825xx drivers

This series is SPDX conversion for bonding, 8390, and i825xx driver
subsystems. It is splitted from v2 of my SPDX conversion series in
response to Didi's GPL full name fixes [1] to make it easily
digestible.

The conversion in this series is divided by each subsystem and by
license type.

[1]: https://lore.kernel.org/linux-spdx/20230512100620.36807-1-bagasdotme@gmail.com/
====================

Link: https://lore.kernel.org/r/20230515060714.621952-1-bagasdotme@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The boilerplate reads that sun3_8256 driver is an extension to Linux
kernel core, hence add SPDX license identifier for GPL 2.0.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michael Hipp <hippm@informatik.uni-tuebingen.de>
Cc: Sam Creasey <sammy@sammy.net>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Replace unversioned GPL boilerplate notice with corresponding SPDX
license identifier, which is GPL 1.0+.

Cc: Donald Becker <becker@scyld.com>
Cc: Richard Hirst <richard@sleepie.demon.co.uk>
Cc: Sam Creasey <sammy@sammy.net>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The boilerplate refers to COPYING in the top-level directory of kernel
tree. Replace it with corresponding SPDX license identifier.

Cc: Donald Becker <becker@scyld.com>
Cc: Peter De Schrijver <p2@mind.be>
Cc: Topi Kanerva <topi@susanna.oulu.fi>
Cc: Alain Malek <Alain.Malek@cryogen.com>
Cc: Bruce Abbott <bhabbott@inhb.co.nz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Fontana <rfontana@redhat.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Replace boilerplate notice for unversioned GPL to SPDX tag for GPL 1.0+.
For ne2k-pci.c, only add SPDX tag and keep the boilerplate instead,
since the boilerplate notes that it must be preserved.

Cc: David A. Hinds <dahinds@users.sourceforge.net>
Cc: Donald Becker <becker@scyld.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Richard Fontana <rfontana@redhat.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Previous batches of SPDX conversion missed bond_main.c and bonding_priv.h
because these files doesn't mention intended GPL version. Add SPDX identifier
to these files, assuming GPL 1.0+.

Cc: Thomas Davis <tadavis@lbl.gov>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

__skb_fill_page_desc_noacc() is not doing any pfmemalloc
propagating, and yet it has a comment about that, commit
84ce071e ("net: introduce __skb_fill_page_desc_noacc")
may have accidentally moved it to __skb_fill_page_desc_noacc(),
so move it back to __skb_fill_page_desc() which is supposed
to be doing pfmemalloc propagating.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20230515050107.46397-1-linyunsheng@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

If it fails to attach fentry, the allocated bpf trampoline image will be
left in the system. That can be verified by checking /proc/kallsyms.

This meamleak can be verified by a simple bpf program as follows:

  SEC("fentry/trap_init")
  int fentry_run()
  {
      return 0;
  }

It will fail to attach trap_init because this function is freed after
kernel init, and then we can find the trampoline image is left in the
system by checking /proc/kallsyms.

  $ tail /proc/kallsyms
  ffffffffc0613000 t bpf_trampoline_6442453466_1  [bpf]
  ffffffffc06c3000 t bpf_trampoline_6442453466_1  [bpf]

  $ bpftool btf dump file /sys/kernel/btf/vmlinux | grep "FUNC 'trap_init'"
  [2522] FUNC 'trap_init' type_id=119 linkage=static

  $ echo $((6442453466 & 0x7fffffff))
  2522

Note that there are two left bpf trampoline images, that is because the
libbpf will fallback to raw tracepoint if -EINVAL is returned.

Fixes: e21aa341 ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/20230515130849.57502-2-laoar.shao@gmail.com

After commit e21aa341 ("bpf: Fix fexit trampoline."), the selector is only
used to indicate how many times the bpf trampoline image are updated and been
displayed in the trampoline ksym name. After the trampoline is freed, the
selector will start from 0 again. So the selector is a useless value to the
user. We can remove it.

If the user want to check whether the bpf trampoline image has been updated
or not, the user can compare the address. Each time the trampoline image is
updated, the address will change consequently. Jiri also pointed out another
issue that perf is still using the old name "bpf_trampoline_%lu", so this
change can fix the issue in perf.

Fixes: e21aa341 ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/ZFvOOlrmHiY9AgXE@krava
Link: https://lore.kernel.org/bpf/20230515130849.57502-3-laoar.shao@gmail.com

This extends the BPF trampoline JIT to support attachment to functions
that take small structures (up to 128bit) as argument. This is trivially
achieved by saving/restoring a number of "argument registers" rather
than a number of arguments.

The AAPCS64 section 6.8.2 describes the parameter passing ABI.
"Composite types" (like C structs) below 16 bytes (as enforced by the
BPF verifier) are provided as part of the 8 argument registers as
explained in the section C.12.
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/bpf/20230511140507.514888-1-revest@chromium.org

On aarch64, "bpftool feature" reports an incorrect BPF JIT limit:

$ sudo /sbin/bpftool feature
Scanning system configuration...
bpf() syscall restricted to privileged users
JIT compiler is enabled
JIT compiler hardening is disabled
JIT compiler kallsyms exports are enabled for root
skipping kernel config, can't open file: No such file or directory
Global memory limit for JIT compiler for unprivileged users is -201326592 bytes

This is because /proc/sys/net/core/bpf_jit_limit reports

$ sudo cat /proc/sys/net/core/bpf_jit_limit
68169519595520

...and an int is assumed in read_procfs().  Change read_procfs()
to return a long to avoid negative value reporting.

Fixes: 7a4522bb ("tools: bpftool: add probes for /proc/ eBPF parameters")
Reported-by: Nicky Veitch <nicky.veitch@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230512113134.58996-1-alan.maguire@oracle.com

Subsequent instruction index (subseq_idx) is an index of an instruction
that was verified/executed by verifier after the currently processed
instruction. It is maintained during precision backtracking processing
and is used to detect various subprog calling conditions.

This patch fixes the bug with incorrectly resetting subseq_idx to -1
when going from child state to parent state during backtracking. If we
don't maintain correct subseq_idx we can misidentify subprog calls
leading to precision tracking bugs.

One such case was triggered by test_global_funcs/global_func9 test where
global subprog call happened to be the very last instruction in parent
state, leading to subseq_idx==-1, triggering WARN_ONCE:

  [   36.045754] verifier backtracking bug
  [   36.045764] WARNING: CPU: 13 PID: 2073 at kernel/bpf/verifier.c:3503 __mark_chain_precision+0xcc6/0xde0
  [   36.046819] Modules linked in: aesni_intel(E) crypto_simd(E) cryptd(E) kvm_intel(E) kvm(E) irqbypass(E) i2c_piix4(E) serio_raw(E) i2c_core(E) crc32c_intel)
  [   36.048040] CPU: 13 PID: 2073 Comm: test_progs Tainted: G        W  OE      6.3.0-07976-g4d585f48-dirty #972
  [   36.048783] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
  [   36.049648] RIP: 0010:__mark_chain_precision+0xcc6/0xde0
  [   36.050038] Code: 3d 82 c6 05 bb 35 32 02 01 e8 66 21 ec ff 0f 0b b8 f2 ff ff ff e9 30 f5 ff ff 48 c7 c7 f3 61 3d 82 4c 89 0c 24 e8 4a 21 ec ff <0f> 0b 4c0

With the fix precision tracking across multiple states works correctly now:

mark_precise: frame0: last_idx 45 first_idx 38 subseq_idx -1
mark_precise: frame0: regs=r8 stack= before 44: (61) r7 = *(u32 *)(r10 -4)
mark_precise: frame0: regs=r8 stack= before 43: (85) call pc+41
mark_precise: frame0: regs=r8 stack= before 42: (07) r1 += -48
mark_precise: frame0: regs=r8 stack= before 41: (bf) r1 = r10
mark_precise: frame0: regs=r8 stack= before 40: (63) *(u32 *)(r10 -48) = r1
mark_precise: frame0: regs=r8 stack= before 39: (b4) w1 = 0
mark_precise: frame0: regs=r8 stack= before 38: (85) call pc+38
mark_precise: frame0: parent state regs=r8 stack=:  R0_w=scalar() R1_w=map_value(off=4,ks=4,vs=8,imm=0) R6=1 R7_w=scalar() R8_r=P0 R10=fpm
mark_precise: frame0: last_idx 36 first_idx 28 subseq_idx 38
mark_precise: frame0: regs=r8 stack= before 36: (18) r1 = 0xffff888104f2ed14
mark_precise: frame0: regs=r8 stack= before 35: (85) call pc+33
mark_precise: frame0: regs=r8 stack= before 33: (18) r1 = 0xffff888104f2ed10
mark_precise: frame0: regs=r8 stack= before 32: (85) call pc+36
mark_precise: frame0: regs=r8 stack= before 31: (07) r1 += -4
mark_precise: frame0: regs=r8 stack= before 30: (bf) r1 = r10
mark_precise: frame0: regs=r8 stack= before 29: (63) *(u32 *)(r10 -4) = r7
mark_precise: frame0: regs=r8 stack= before 28: (4c) w7 |= w0
mark_precise: frame0: parent state regs=r8 stack=:  R0_rw=scalar() R6=1 R7_rw=scalar() R8_rw=P0 R10=fp0 fp-48_r=mmmmmmmm
mark_precise: frame0: last_idx 27 first_idx 16 subseq_idx 28
mark_precise: frame0: regs=r8 stack= before 27: (85) call pc+31
mark_precise: frame0: regs=r8 stack= before 26: (b7) r1 = 0
mark_precise: frame0: regs=r8 stack= before 25: (b7) r8 = 0

Note how subseq_idx starts out as -1, then is preserved as 38 and then 28 as we
go up the parent state chain.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: fde2a388 ("bpf: support precision propagation in the presence of subprogs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230515180710.1535018-1-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

For kfuncs like bpf_obj_drop and bpf_refcount_acquire - which take
user-defined types as input - the verifier needs to track the specific
type passed in when checking a particular kfunc call. This requires
tracking (btf, btf_id) tuple. In commit 7c50b1cb
("bpf: Add bpf_refcount_acquire kfunc") I added an anonymous union with
inner structs named after the specific kfuncs tracking this information,
with the goal of making it more obvious which kfunc this data was being
tracked / expected to be tracked on behalf of.

In a recent series adding a new user of this tuple, Alexei mentioned
that he didn't like this union usage as it doesn't really help with
readability or bug-proofing ([0]). In an offline convo we agreed to
have the tuple be fields (arg_btf, arg_btf_id), with comments in
bpf_kfunc_call_arg_meta definition enumerating the uses of the fields by
kfunc-specific handling logic. Such a pattern is used by struct
bpf_reg_state without trouble.

Accordingly, this patch removes the anonymous union in favor of arg_btf
and arg_btf_id fields and comment enumerating their current uses. The
patch also removes struct btf_and_id, which was only being used by the
removed union's inner structs.

This is a mechanical change, existing linked_list and rbtree tests will
validate that correct (btf, btf_id) are being passed.

  [0]: https://lore.kernel.org/bpf/20230505021707.vlyiwy57vwxglbka@dhcp-172-26-102-232.dhcp.thefacebook.comSigned-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230510213047.1633612-1-davemarchevsky@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

If sock->service_name is NULL, the local variable
service_name_tlv_length will not be assigned by nfc_llcp_build_tlv(),
later leading to using value frmo the stack.  Smatch warning:

  net/nfc/llcp_commands.c:442 nfc_llcp_send_connect() error: uninitialized symbol 'service_name_tlv_length'.

Fixes: de9e5aeb ("NFC: llcp: Fix usage of llcp_add_tlv()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

./drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:242:2-3: Unneeded semicolon
./drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c:476:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4947Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the extra semicolon at end. Issue identified using
semicolon.cocci Coccinelle semantic patch.

drivers/net/ethernet/microchip/vcap/vcap_api.c:1124:3-4: Unneeded semicolon
drivers/net/ethernet/microchip/vcap/vcap_api.c:1165:3-4: Unneeded semicolon
drivers/net/ethernet/microchip/vcap/vcap_api.c:1239:3-4: Unneeded semicolon
drivers/net/ethernet/microchip/vcap/vcap_api.c:1287:3-4: Unneeded semicolon
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>

Changes:
V1 -> V2: Target tree included in the subject line.
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Kelam says:

====================
octeontx2-pf: HTB offload support

octeontx2 silicon and CN10K transmit interface consists of five
transmit levels starting from MDQ, TL4 to TL1. Once packets are
submitted to MDQ, hardware picks all active MDQs using strict
priority, and MDQs having the same priority level are chosen using
round robin. Each packet will traverse MDQ, TL4 to TL1 levels.
Each level contains an array of queues to support scheduling and
shaping.

As HTB supports classful queuing mechanism by supporting rate and
ceil and allow the user to control the absolute bandwidth to
particular classes of traffic the same can be achieved by
configuring shapers and schedulers on different transmit levels.

This series of patches adds support for HTB offload,

Patch1: Allow strict priority parameter in HTB offload mode.

Patch2: Rename existing total tx queues for better readability

Patch3: defines APIs such that the driver can dynamically initialize/
        deinitialize the send queues.

Patch4: Refactors transmit alloc/free calls as preparation for QOS
        offload code.

Patch5: moves rate limiting logic to common header which will be used
        by qos offload code.

Patch6: Adds actual HTB offload support.

Patch7: exposes qos send queue stats over ethtool.

Patch8: Add documentation about htb offload flow in driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add QOS example configuration along with tc-htb commands
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch extends ethtool stats support for QoS send queues as well.
upon the number of transmit channels change request, Ensures the real
number of transmit queues are equal to active QoS send queues plus
configured transmit queues.

    ethtool -S eth0
    txq_qos0: bytes: 3021391800
    txq_qos0: frames: 1998275
    txq_qos1: bytes: 4619766312
    txq_qos1: frames: 3055401
    ...
    ...
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch registers callbacks to support HTB offload.

Below are features supported,

- supports traffic shaping on the given class by honoring rate and ceil
configuration.

- supports traffic scheduling,  which prioritizes different types of
traffic based on strict priority values.

- supports the creation of leaf to inner classes such that parent node
rate limits apply to all child nodes.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch moves rate limiting definitions to a common header file and
adds csr definitions required for QOS code.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>