- 18 Apr, 2016 40 commits
-
-
Paolo Bonzini authored
[ Upstream commit 2849eb4f ] A guest executing an invalid invept instruction would hang because the instruction pointer was not updated. Cc: stable@vger.kernel.org Fixes: bfd0a56bReviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Himanshu Madhani authored
[ Upstream commit 5e47f198 ] This patch fixes an active I/O shutdown bug for fabric drivers using target_wait_for_sess_cmds(), where se_cmd descriptor shutdown would result in hung tasks waiting indefinitely for se_cmd->cmd_wait_comp to complete(). To address this bug, drop the incorrect list_del_init() usage in target_wait_for_sess_cmds() and always complete() during se_cmd target_release_cmd_kref() put, in order to let caller invoke the final fabric release callback into se_cmd->se_tfo->release_cmd() code. Reported-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit f75d4864 ] __clear_bit_unlock() is a special little snowflake. While it carries the non-atomic '__' prefix, it is specifically documented to pair with test_and_set_bit() and therefore should be 'somewhat' atomic. Therefore the generic implementation of __clear_bit_unlock() cannot use the fully non-atomic __clear_bit() as a default. If an arch is able to do better; is must provide an implementation of __clear_bit_unlock() itself. Specifically, this came up as a result of hackbench livelock'ing in slab_lock() on ARC with SMP + SLUB + !LLSC. The issue was incorrect pairing of atomic ops. slab_lock() -> bit_spin_lock() -> test_and_set_bit() slab_unlock() -> __bit_spin_unlock() -> __clear_bit() The non serializing __clear_bit() was getting "lost" 80543b8e: ld_s r2,[r13,0] <--- (A) Finds PG_locked is set 80543b90: or r3,r2,1 <--- (B) other core unlocks right here 80543b94: st_s r3,[r13,0] <--- (C) sets PG_locked (overwrites unlock) Fixes ARC STAR 9000817404 (and probably more). Reported-by:
Vineet Gupta <Vineet.Gupta1@synopsys.com> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Noam Camus <noamc@ezchip.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160309114054.GJ6356@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Victor Clément authored
[ Upstream commit 0ef21100 ] The Microsoft HD-5001 webcam microphone does not support sample rate reading as the HD-5000 one. This results in dmesg errors and sound hanging with pulseaudio. Signed-off-by:
Victor Clément <victor.clement@openmailbox.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit d6785d91 ] Running the following command: busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null with any tracing enabled pretty very quickly leads to various NULL pointer dereferences and VM BUG_ON()s, such as these: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) kernel BUG at include/linux/mm.h:367! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89 (busybox's cat uses sendfile(2), unlike the coreutils version) This is because tracing_splice_read_pipe() can call splice_to_pipe() with spd->nr_pages == 0. spd_pages underflows in splice_to_pipe() and we fill the page pointers and the other fields of the pipe_buffers with garbage. All other callers of splice_to_pipe() avoid calling it when nr_pages == 0, and we could make tracing_splice_read_pipe() do that too, but it seems reasonable to have splice_to_page() handle this condition gracefully. Cc: stable@vger.kernel.org Signed-off-by:
Rabin Vincent <rabin@rab.in> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
[ Upstream commit a29054d9 ] If tracing contains data and the trace_pipe file is read with sendfile(), then it can trigger a NULL pointer dereference and various BUG_ON within the VM code. There's a patch to fix this in the splice_to_pipe() code, but it's also a good idea to not let that happen from trace_pipe either. Link: http://lkml.kernel.org/r/1457641146-9068-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 2.6.30+ Reported-by:
Rabin Vincent <rabin.vincent@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 55ff8cfb ] The uas driver can never queue more then MAX_CMNDS (- 1) tags and tags are shared between luns, so there is no need to claim that we can_queue some random large number. Not claiming that we can_queue 65536 commands, fixes the uas driver failing to initialize while allocating the tag map with a "Page allocation failure (order 7)" error on systems which have been running for a while and thus have fragmented memory. Cc: stable@vger.kernel.org Reported-and-tested-by:
Yves-Alexis Perez <corsac@corsac.net> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 8835ba4a ] An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 0b818e39 ] Attacks that trick drivers into passing a NULL pointer to usb_driver_claim_interface() using forged descriptors are known. This thwarts them by sanity checking. Signed-off-by:
-
Josh Boyer authored
[ Upstream commit 4ec0ef3a ] The iowarrior driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. The full report of this issue can be found here: http://seclists.org/bugtraq/2016/Mar/87Reported-by:
Ralf Spenneberg <ralf@spenneberg.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
-
Dave Jones authored
[ Upstream commit 7834c103 ] Since 4.4, I've been able to trigger this occasionally: =============================== [ INFO: suspicious RCU usage. ] 4.5.0-rc7-think+ #3 Not tainted Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20160315012054.GA17765@codemonkey.org.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> ------------------------------- ./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 1 RCU used illegally from extended quiescent state! no locks held by swapper/3/0. stack backtrace: CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.5.0-rc7-think+ #3 ffffffff92f821e0 1f3e5c340597d7fc ffff880468e07f10 ffffffff92560c2a ffff880462145280 0000000000000001 ffff880468e07f40 ffffffff921376a6 ffffffff93665ea0 0000cc7c876d28da 0000000000000005 ffffffff9383dd60 Call Trace: <IRQ> [<ffffffff92560c2a>] dump_stack+0x67/0x9d [<ffffffff921376a6>] lockdep_rcu_suspicious+0xe6/0x100 [<ffffffff925ae7a7>] do_trace_write_msr+0x127/0x1a0 [<ffffffff92061c83>] native_apic_msr_eoi_write+0x23/0x30 [<ffffffff92054408>] smp_trace_call_function_interrupt+0x38/0x360 [<ffffffff92d1ca60>] trace_call_function_interrupt+0x90/0xa0 <EOI> [<ffffffff92ac5124>] ? cpuidle_enter_state+0x1b4/0x520 Move the entering_irq() call before ack_APIC_irq(), because entering_irq() tells the RCU susbstems to end the extended quiescent state, so that the following trace call in ack_APIC_irq() works correctly. Suggested-by:
Andi Kleen <ak@linux.intel.com> Fixes: 4787c368 "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()" Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Zhang Rui authored
[ Upstream commit 81ad4276 ] In some cases, platform thermal driver may report invalid trip points, thermal core should not take any action for these trip points. This fixed a regression that bogus trip point starts to screw up thermal control on some Lenovo laptops, after commit bb431ba2 Author: Zhang Rui <rui.zhang@intel.com> Date: Fri Oct 30 16:31:47 2015 +0800 Thermal: initialize thermal zone device correctly After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. Tested-by:
Manuel Krause <manuelkrause@netscape.net> Tested-by:
szegad <szegadlo@poczta.onet.pl> Tested-by:
prash <prash.n.rao@gmail.com> Tested-by:
amish <ammdispose-arch@yahoo.com> Tested-by:
Matthias <morpheusxyz123@yahoo.de> Reviewed-by:
Javi Merino <javi.merino@arm.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> CC: <stable@vger.kernel.org> #3.18+ Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190 Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551Signed-off-by:
-
Benjamin Tissoires authored
[ Upstream commit 82be788c ] Looks like the fimware 8.2 still has the extra buttons spurious release bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321 Cc: stable@vger.kernel.org Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit a0ad220c ] A malicious device missing interface can make the driver oops. Add sanity checking. Signed-off-by:
-
Adrian Hunter authored
[ Upstream commit 99513624 ] Normally the timeout clock frequency is read from the capabilities register. It is also possible to set the value prior to calling sdhci_add_host() in which case that value will override the capabilities register value. However that was being done after calculating max_busy_timeout so that max_busy_timeout was being calculated using the wrong value of timeout_clk. Fix that by moving the override before max_busy_timeout is calculated. The result is that the max_busy_timeout and max_discard increase for BSW devices so that, for example, the time for mkfs.ext4 on a 64GB eMMC drops from about 1 minute 40 seconds to about 20 seconds. Note, in the future, the capabilities setting will be tidied up and this override won't be used anymore. However this fix is needed for stable. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit c29016cf ] iopl(3) is supposed to work if iopl is already 3, even if unprivileged. This didn't work right on Xen PV. Fix it. Reviewewd-by:
Jan Beulich <JBeulich@suse.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/8ce12013e6e4c0a44a97e316be4a6faff31bd5ea.1458162709.git.luto@kernel.orgSigned-off-by:
-
Hans de Goede authored
[ Upstream commit 8bf1b9b3 ] The touchscreen controller in the A13 and later has a different temperature curve than the one in the original A10, change the compatible for the A13 and later so that the kernel will use the correct curve. Reported-by:
Tong Zhang <lovewilliam@gmail.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 2f6fc056 ] nfsd_lookup_dentry exits with the parent filehandle locked. fh_put also unlocks if necessary (nfsd filehandle locking is probably too lenient), so it gets unlocked eventually, but if the following op in the compound needs to lock it again, we can deadlock. A fuzzer ran into this; normal clients don't send a secinfo followed by a readdir in the same compound. Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 0f886ca1 ] create_fixed_stream_quirk() may cause a NULL-pointer dereference by accessing the non-existing endpoint when a USB device with a malformed USB descriptor is used. This patch avoids it simply by adding a sanity check of bNumEndpoints before the accesses. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=971125 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Magnus Damm authored
[ Upstream commit bcdc9f26 ] This patch fixes the MMC SPI driver from doing polling card detect when a CD GPIO that supports interrupts is specified using the gpios DT property. Without this patch the DT node below results in the following output: spi_gpio: spi-gpio { /* SD2 @ CN12 */ compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; gpio-sck = <&gpio6 16 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio6 17 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio6 18 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; cs-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; status = "okay"; spi@0 { compatible = "mmc-spi-slot"; reg = <0>; voltage-ranges = <3200 3400>; spi-max-frequency = <25000000>; gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; /* CD */ }; }; # dmesg | grep mmc mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new SDHC card on SPI mmcblk0: mmc0:0000 SU04G 3.69 GiB mmcblk0: p1 With this patch applied the "cd polling" portion above disappears. Signed-off-by:
Magnus Damm <damm+renesas@opensource.se> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 1f7c6658 ] Cirrus HD-audio driver may adjust GPIO pins for EAPD dynamically depending on the jack plug state. This works fine for the auto-mute mode where the speaker gets muted upon the HP jack plug. OTOH, when the auto-mute mode is off, this turns off the EAPD unexpectedly depending on the jack state, which results in the silent speaker output. This patch fixes the silent speaker output issue by setting GPIO bits constantly when the auto-mute mode is off. Reported-and-tested-by: moosotc@gmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dmitry Torokhov authored
[ Upstream commit 3b654288 ] Even though hid_hw_* checks that passed in data_len is less than HID_MAX_BUFFER_SIZE it is not enough, as i2c-hid does not necessarily allocate buffers of HID_MAX_BUFFER_SIZE but rather checks all device reports and select largest size. In-kernel users normally just send as much data as report needs, so there is no problem, but hidraw users can do whatever they please: BUG: KASAN: slab-out-of-bounds in memcpy+0x34/0x54 at addr ffffffc07135ea80 Write of size 4101 by task syz-executor/8747 CPU: 2 PID: 8747 Comm: syz-executor Tainted: G BU 3.18.0 #37 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc00020ebcc>] dump_backtrace+0x0/0x258 arch/arm64/kernel/traps.c:83 [<ffffffc00020ee40>] show_stack+0x1c/0x2c arch/arm64/kernel/traps.c:172 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc001958114>] dump_stack+0x90/0x140 lib/dump_stack.c:50 [< inline >] print_error_description mm/kasan/report.c:97 [< inline >] kasan_report_error mm/kasan/report.c:278 [<ffffffc0004597dc>] kasan_report+0x268/0x530 mm/kasan/report.c:305 [<ffffffc0004592e8>] __asan_storeN+0x20/0x150 mm/kasan/kasan.c:718 [<ffffffc0004594e0>] memcpy+0x30/0x54 mm/kasan/kasan.c:299 [<ffffffc001306354>] __i2c_hid_command+0x2b0/0x7b4 drivers/hid/i2c-hid/i2c-hid.c:178 [< inline >] i2c_hid_set_or_send_report drivers/hid/i2c-hid/i2c-hid.c:321 [<ffffffc0013079a0>] i2c_hid_output_raw_report.isra.2+0x3d4/0x4b8 drivers/hid/i2c-hid/i2c-hid.c:589 [<ffffffc001307ad8>] i2c_hid_output_report+0x54/0x68 drivers/hid/i2c-hid/i2c-hid.c:602 [< inline >] hid_hw_output_report include/linux/hid.h:1039 [<ffffffc0012cc7a0>] hidraw_send_report+0x400/0x414 drivers/hid/hidraw.c:154 [<ffffffc0012cc7f4>] hidraw_write+0x40/0x64 drivers/hid/hidraw.c:177 [<ffffffc0004681dc>] vfs_write+0x1d4/0x3cc fs/read_write.c:534 [< inline >] SYSC_pwrite64 fs/read_write.c:627 [<ffffffc000468984>] SyS_pwrite64+0xec/0x144 fs/read_write.c:614 Object at ffffffc07135ea80, in cache kmalloc-512 Object allocated with size 268 bytes. Let's check data length against the buffer size before attempting to copy data over. Cc: stable@vger.kernel.org Reported-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Dmitry Torokhov <dtor@chromium.org> Reviewed-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Dmitri Epshtein authored
[ Upstream commit 928b6519 ] Function eth_prepare_mac_addr_change() is called as part of MAC address change. This function check if interface is running. To enable change MAC address when interface is running: IFF_LIVE_ADDR_CHANGE flag must be set to dev->priv_flags field Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: stable@vger.kernel.org Signed-off-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ming Lei authored
[ Upstream commit fafcde3a ] Inside multipath_make_request(), multipath maps the incoming bio into low level device's bio, but it is totally wrong to copy the bio into mapped bio via '*mapped_bio = *bio'. For example, .__bi_remaining is kept in the copy, especially if the incoming bio is chained to via bio splitting, so .bi_end_io can't be called for the mapped bio at all in the completing path in this kind of situation. This patch fixes the issue by using clone style. Cc: stable@vger.kernel.org (v3.14+) Reported-and-tested-by:
Andrea Righi <righi.andrea@gmail.com> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit e5f243bd ] Move all the logic to radeon_fb.c and add checks to functions called frome elsewhere. bug: https://bugzilla.kernel.org/show_bug.cgi?id=112781Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dave Airlie authored
[ Upstream commit bb26270e ] These are just two wrappers to be used in the MST code later. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Josh Boyer authored
[ Upstream commit 9c6ba456 ] The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85Reported-by:
-
Sebastian Ott authored
[ Upstream commit 80c544de ] The function measurement block must not cross a page boundary. Ensure that by raising the alignment requirement to the smallest power of 2 larger than the size of the fmb. Fixes: d0b08853 ("s390/pci: performance statistics and debug infrastructure") Cc: stable@vger.kernel.org # v3.8+ Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Sebastian Ott authored
[ Upstream commit 6001018a ] The software counters are not a part of the function measurement block. Also we do not check for zdev->fmb != NULL when using these counters (function measurement can be toggled at runtime). Just move the software counters to struct zpci_dev. Signed-off-by:
-
Vittorio Gambaletta (VittGam) authored
[ Upstream commit 4061db03 ] The clock measurement on the AC'97 audio card found in the IBM ThinkPad X41 will often fail, so add a quirk entry to fix it. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=441087 Cc: <stable@vger.kernel.org> Signed-off-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 3ec622f4 ] Vendor ID 0x10de0083 is used by a yet-to-be-named GPU chip. This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is appropriate here. Signed-off-by:
Aaron Plattner <aplattner@nvidia.com> Signed-off-by:
-
Aaron Plattner authored
[ Upstream commit 2d369c74 ] Vendor ID 0x10de0082 is used by a yet-to-be-named GPU chip. This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is appropriate here. Signed-off-by:
-
Aaron Plattner authored
[ Upstream commit 6c3d9119 ] Vendor ID 0x10de007d is used by a yet-to-be-named GPU chip. This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is appropriate here. Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 33b96d2c ] Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Cc: <stable@vger.kernel.org> Suggested-by:
Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Max Filippov authored
[ Upstream commit 7de7ac78 ] There are XCHAL_NUM_DBREAK registers, clear them all. This also fixes cryptic assembler error message with binutils 2.25 when XCHAL_NUM_DBREAK is 0: as: out of memory allocating 18446744073709551575 bytes after a total of 495616 bytes Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit a67cc9aa ] Disabling pagefault makes little sense there, preemption disabling is what was meant. Cc: stable@vger.kernel.org Signed-off-by:
-
Max Filippov authored
[ Upstream commit 362014c8 ] Simulator stdin may be connected to a file, when its end is reached kernel hangs in infinite loop inside rs_poll, because simc_poll always signals that descriptor 0 is readable and simc_read always returns 0. Check simc_read return value and exit loop if it's not positive. Also don't rewind polling timer if it's zero. Cc: stable@vger.kernel.org Signed-off-by:
-
Hui Wang authored
[ Upstream commit 6ef2f68f ] This Lenovo ThinkCentre AIO also uses Line2 as mic mute button and uses GPIO2 to control the mic mute led, so applying this quirk can make both the button and led work. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1555912Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Dmitry Tunin authored
[ Upstream commit 75c6aca4 ] T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3472 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1552925Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Luck, Tony authored
[ Upstream commit eb1af3b7 ] Large memory Haswell-EX systems with multiple DIMMs per channel were sometimes reporting the wrong DIMM. Found three problems: 1) Debug printouts for socket and channel interleave were not interpreting the register fields correctly. The socket interleave field is a 2^X value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2, 2=3. 3=4). 2) Actual use of the socket interleave value didn't interpret as 2^X 3) Conversion of address to channel address was complicated, and wrong. Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Aristeu Rozanski <arozansk@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
-
