- 06 Jul, 2020 2 commits
-
-
Robin Gong authored
Add device binding doc for pca9450 pmic driver. Signed-off-by:
Robin Gong <yibin.gong@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1593793178-9737-3-git-send-email-yibin.gong@nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Robin Gong authored
Add NXP pca9450 pmic driver. Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/1593793178-9737-2-git-send-email-yibin.gong@nxp.comSigned-off-by:
-
- 03 Jul, 2020 2 commits
-
-
Christoph Fritz authored
Add device tree binding information for fan53880 regulator driver. Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/20200702210846.31659-3-chf.fritz@googlemail.comSigned-off-by:
-
Christoph Fritz authored
This patch adds support for ON Semiconductor FAN53880 regulator. The FAN53880 is an I2C porgrammable power management IC (PMIC) that contains a BUCK (step-down converter), four LDOs (low dropouts) and one BOOST (step-up converter). It is designed for mobile power applications. Signed-off-by:
-
- 02 Jul, 2020 13 commits
-
-
Mark Brown authored
Merge series "regulator: mt6397: Implement of_map_mode regulator_desc function" from Anand K Mistry <amistry@google.com>: This patchset adds support for being able to change regulator modes for the mt6397 regulator. This is needed to allow the voltage scaling support in the MT8173 SoC to be used on the elm (Acer Chromebook R13) and hana (several Lenovo Chromebooks) devices. Without a of_map_mode implementation, the regulator-allowed-modes devicetree field is skipped, and attempting to change the regulator mode results in an error: [ 1.439165] vpca15: mode operation not allowed Changes in v2: - Introduce constants in dt-bindings - Improve conditional readability Anand K Mistry (4): regulator: mt6397: Move buck modes into header file dt-bindings: regulator: mt6397: Document valid modes regulator: mt6397: Implement of_map_mode arm64: dts: mediatek: Update allowed mt6397 regulator modes for elm boards .../bindings/regulator/mt6397-regulator.txt | 3 +++ arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 +++- drivers/regulator/mt6397-regulator.c | 17 ++++++++++++++--- .../regulator/mediatek,mt6397-regulator.h | 15 +++++++++++++++ 4 files changed, 35 insertions(+), 4 deletions(-) create mode 100644 include/dt-bindings/regulator/mediatek,mt6397-regulator.h -- 2.27.0.212.ge8ba1cc988-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -
Mark Brown authored
This patchset adds support for being able to change regulator modes for the da9211 regulator. This is needed to allow the voltage scaling support in the MT8173 SoC to be used in the elm (Acer Chromebook R13) and hana (several Lenovo Chromebooks) devices. Anand K Mistry (4): regulator: da9211: Move buck modes into header file dt-bindings: regulator: da9211: Document allowed modes regulator: da9211: Implement of_map_mode arm64: dts: mediatek: Update allowed regulator modes for elm boards .../devicetree/bindings/regulator/da9211.txt | 4 +++ arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 4 ++- drivers/regulator/da9211-regulator.c | 30 +++++++++++++++---- .../regulator/dlg,da9211-regulator.h | 16 ++++++++++ 4 files changed, 47 insertions(+), 7 deletions(-) create mode 100644 include/dt-bindings/regulator/dlg,da9211-regulator.h -- 2.27.0.212.ge8ba1cc988-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-
Mark Brown authored
Merge series "regulator: add support for SY8827N regulator" from Jisheng Zhang <Jisheng.Zhang@synaptics.com>: The SY8827N from Silergy Corp is a single output DC/DC converter. The voltage can be controlled via I2C. Jisheng Zhang (2): dt-bindings: regulator: add document bindings for sy8827n regulator: add support for SY8827N regulator .../bindings/regulator/silergy,sy8827n.yaml | 45 +++++ drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/sy8827n.c | 185 ++++++++++++++++++ 4 files changed, 238 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8827n.yaml create mode 100644 drivers/regulator/sy8827n.c -- 2.27.0
-
Jisheng Zhang authored
Use the new .probe_new for mp886x. It does not use the const struct i2c_device_id * argument, so convert it to utilise the simplified i2c driver registration. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200702100200.1a4c65d1@xhacker.debianSigned-off-by:
-
Colin Ian King authored
The null pointer check on regmap that checks for a dev_get_regmap failure is currently returning -ENOENT if the regmap succeeded. Fix this by adding in the missing ! operator. Fixes: 4fe66d5a ("regulator: Add support for QCOM PMIC VBUS booster") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Dereference after null check") Link: https://lore.kernel.org/r/20200702115659.38208-1-colin.king@canonical.comSigned-off-by:
-
Anand K Mistry authored
This patch adds a description of how operating modes may be specified. Signed-off-by:
Anand K Mistry <amistry@google.com> Link: https://lore.kernel.org/r/20200702131350.2.I6131e251d13f60d8c5347bb4faa9dc2364c87848@changeidSigned-off-by:
-
Anand K Mistry authored
Implementing of_map_mode is necessary to be able to specify operating modes in the devicetree using 'regulator-allowed-modes', and to change regulator modes. Signed-off-by:
-
Anand K Mistry authored
This will allow device trees to make use of these constants. Signed-off-by:
-
Jisheng Zhang authored
Add device tree binding information for sy8827n regulator driver. Signed-off-by:
-
Jisheng Zhang authored
The SY8827N from Silergy Corp is a single output DC/DC converter. The voltage can be controlled via I2C. Signed-off-by:
-
Anand K Mistry authored
Document valid mode values for BUCK regulators. Signed-off-by:
-
Anand K Mistry authored
Implementing of_map_mode is necessary to be able to specify operating modes in the devicetree using 'regulator-allowed-modes', and to change regulator modes. Signed-off-by:
-
Anand K Mistry authored
This will allow device trees to make use of these constants. Signed-off-by:
-
- 01 Jul, 2020 10 commits
-
-
Mark Brown authored
Changes in v4: - Modified qcom,pmic-typec binding to include the SS mux and the DRD remote endpoint nodes underneath port@1, which is assigned to the SSUSB path according to usb-connector - Added usb-connector reference to the typec dt-binding - Added tags to the usb type c and vbus nodes - Removed "qcom" tags from type c and vbus nodes - Modified Kconfig module name, and removed module alias from the typec driver Changes in v3: - Fix driver reference to match driver name in Kconfig for qcom_usb_vbus-regulator.c - Utilize regulator bitmap helpers for enable, disable and is enabled calls in qcom_usb_vbus-regulator.c - Use of_get_regulator_init_data() to initialize regulator init data, and to set constraints in qcom_usb_vbus-regulator.c - Remove the need for a local device structure in the vbus regulator driver Changes in v2: - Use devm_kzalloc() in qcom_pmic_typec_probe() - Add checks to make sure return value of typec_find_port_power_role() is valid - Added a VBUS output regulator driver, which will be used by the PMIC USB type c driver to enable/disable the source - Added logic to control vbus source from the PMIC type c driver when UFP/DFP is detected - Added dt-binding for this new regulator driver - Fixed Kconfig typec notation to match others - Leave type C block disabled until enabled by a platform DTS Add the required drivers for implementing type C orientation and role detection using the Qualcomm PMIC. Currently, PMICs such as the PM8150B have an integrated type C block, which can be utilized for this. This series adds the dt-binding, PMIC type C driver, and DTS nodes. The PMIC type C driver will register itself as a type C port w/ a registered type C switch for orientation, and will fetch a USB role switch handle for the role notifications. It will also have the ability to enable the VBUS output to any connected devices based on if the device is behaving as a UFP or DFP. Wesley Cheng (6): usb: typec: Add QCOM PMIC typec detection driver dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding arm64: boot: dts: qcom: pm8150b: Add node for USB type C block regulator: Add support for QCOM PMIC VBUS booster dt-bindings: regulator: Add dt-binding for QCOM PMIC VBUS output regulator arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster .../regulator/qcom,usb-vbus-regulator.yaml | 41 +++ .../bindings/usb/qcom,pmic-typec.yaml | 113 +++++++ arch/arm64/boot/dts/qcom/pm8150b.dtsi | 13 + arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/qcom_usb_vbus-regulator.c | 97 ++++++ drivers/usb/typec/Kconfig | 12 + drivers/usb/typec/Makefile | 1 + drivers/usb/typec/qcom-pmic-typec.c | 275 ++++++++++++++++++ 10 files changed, 567 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml create mode 100644 drivers/regulator/qcom_usb_vbus-regulator.c create mode 100644 drivers/usb/typec/qcom-pmic-typec.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -
Mark Brown authored
Merge series "regulator/qcom: Constify static structs" from Rikard Falkeborn <rikard.falkeborn@gmail.com>: Constify some static structs to allow the compiler to put them in read-only memory. Rikard Falkeborn (2): regulator: qcom_rpm: Constify struct regulator_ops regulator: qcom_spmi: Constify struct regulator_ops drivers/regulator/qcom_rpm-regulator.c | 6 +++--- drivers/regulator/qcom_spmi-regulator.c | 24 ++++++++++++------------ 2 files changed, 15 insertions(+), 15 deletions(-) -- 2.27.0
-
Mark Brown authored
Merge series "Add frequency / voltage scaling support for IPQ6018 SoC" from Kathiravan T <kathirav@codeaurora.org>: IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496 controls the APSS and SDCC voltage scaling respectively. Add support for the same. changes since V1: - Moved YAML conversion to the last as per Mark's comments Kathiravan T (6): dt-bindings: soc: qcom: Add IPQ6018 compatible soc: qcom: smd-rpm: Add IPQ6018 compatible dt-bindings: regulator: add MP5496 regulator compatible regulator: qcom_smd: Add MP5496 regulators dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema dt-bindings: regulator: convert QCOM SMD-RPM regulator document to YAML schema .../bindings/regulator/qcom,smd-rpm-regulator.txt | 320 --------------------- .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++ .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 62 ---- .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++ drivers/regulator/qcom_smd-regulator.c | 34 +++ drivers/soc/qcom/smd-rpm.c | 1 + 6 files changed, 233 insertions(+), 382 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -
Luca Ceresoli authored
This driver enables outputs by setting bit EN_BUCKn in the BUCKn_CTRL1 register. However, if bit EN_PIN_CTRLn in the same register is set, the output is actually enabled only if EN_BUCKn is set AND an enable pin is active. Since the driver does not touch EN_PIN_CTRLn, the choice is left to the hardware, which in turn gets this bit from OTP memory, and in absence of OTP data it uses a default value that is documented in the datasheet for LP8752x, but not for LP8756x. Thus the driver doesn't really "know" whether it is actually enabling the output or not. In order to make sure activation is always driver-controlled, just clear the EN_PIN_CTRLn bit. Now all activation solely depend on the EN_BUCKn bit. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Link: https://lore.kernel.org/r/20200622204329.11147-2-luca@lucaceresoli.netSigned-off-by:
-
Kathiravan T authored
IPQ6018 uses the PMIC MP5496. Add the binding for the same. Signed-off-by:
Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1592889472-6843-4-git-send-email-kathirav@codeaurora.orgSigned-off-by:
-
Kathiravan T authored
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator controls the APSS and SDCC voltage scaling respectively. Add support for the same. Signed-off-by:
-
Rikard Falkeborn authored
These are never modified, so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 20362 2592 152 23106 5a42 drivers/regulator/qcom_spmi-regulator.o After: text data bss dec hex filename 21814 1140 152 23106 5a42 drivers/regulator/qcom_spmi-regulator.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200629194632.8147-3-rikard.falkeborn@gmail.comSigned-off-by:
-
Rikard Falkeborn authored
These are never modified, so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 17485 500 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o After: text data bss dec hex filename 17881 104 8 17993 4649 drivers/regulator/qcom_rpm-regulator.o Signed-off-by:
-
Wesley Cheng authored
This describes how to enable the Qualcomm PMIC VBUS booster used for providing power to connected USB peripherals when the USB role is host mode. The driver itself will register the vbus_usb regulator, so that external drivers can utilize the enable/disable regulator APIs. Signed-off-by:
Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20200626185516.18018-6-wcheng@codeaurora.orgSigned-off-by:
-
Wesley Cheng authored
Some Qualcomm PMICs have the capability to source the VBUS output to connected peripherals. This driver will register a regulator to the regulator list to enable or disable this source by an external driver. Signed-off-by:
-
- 26 Jun, 2020 9 commits
-
-
Lee Jones authored
This was an upstreaming error. Remove it as it's not to be used. Fixes the following W=1 kernel build warning: drivers/regulator/qcom_smd-regulator.c:477:36: warning: ‘pmi8994_boost’ defined but not used [-Wunused-const-variable=] Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-10-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used. This change fixes the following warnings: drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'dev' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'reg' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'initdata' not described in 'wm8400_register_regulator' Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Link: https://lore.kernel.org/r/20200626065738.93412-9-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_enable’: drivers/regulator/tps65218-regulator.c:131:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 131 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_disable’: drivers/regulator/tps65218-regulator.c:144:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 144 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ Signed-off-by:
-
Lee Jones authored
Until now the aforementioned return value has been ignored. Previous and current calls to tps65217_reg_read() return instantly when the value is not 0, so let's do that. Fixes the following W=1 warning: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_regulator_probe’: drivers/regulator/tps65217-regulator.c:227:9: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 227 | int i, ret; | ^~~ Signed-off-by:
-
Lee Jones authored
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_enable’: drivers/regulator/tps65217-regulator.c:127:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 127 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_disable’: drivers/regulator/tps65217-regulator.c:140:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 140 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ Signed-off-by:
-
Lee Jones authored
In kerneldoc format, data structures have to start with 'struct' else the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 kernel build warning: drivers/regulator/stpmic1_regulator.c:25: warning: cannot understand function prototype: 'struct stpmic1_regulator_cfg ' Signed-off-by:
-
Lee Jones authored
This particular comment doesn't have anything to do with documenting functions or data structures. Instead it is used as a section header. Fixes W=1 warning: drivers/regulator/pwm-regulator.c:55: warning: Function parameter or member 'rdev' not described in 'pwm_regulator_init_state' Signed-off-by:
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various enum properties and function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used or none at all. This change fixes the following warnings: drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'VRM' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'XOB' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'vreg' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'dev' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'node' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_id' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_rpmh_data' not described in 'rpmh_regulator_init_vreg' Signed-off-by:
-
Lee Jones authored
max8998_get_current_limit() is only used via the .get_current_limit, so it doesn't need to be publicly supported, or to have its own external prototype. Instead, we'll make it static. Fixes the following W=1 warning: drivers/regulator/max8998.c:418:5: warning: no previous prototype for ‘max8998_get_current_limit’ [-Wmissing-prototypes] 418 | int max8998_get_current_limit(struct regulator_dev *rdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
-
- 25 Jun, 2020 4 commits
-
-
Lee Jones authored
Nothing about this comment identifies it as a kerneldoc header. It's missing all of it's function argument descriptions and the correct function header. Fixes the following W=1 warning(s): drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'max14577' not described in 'max14577_get_regma drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'reg_id' not described in 'max14577_get_regmap' Signed-off-by:
-
Lee Jones authored
Nothing about this comment identifies it as a kerneldoc header. They're missing all of their struct's property descriptions and the correct 'struct *' header. Fixes the following W=1 warning(s): drivers/regulator/cpcap-regulator.c:99: warning: cannot understand function prototype: 'struct cpcap_regulator ' drivers/regulator/cpcap-regulator.c:337: warning: cannot understand function prototype: 'const struct cpcap_regulator omap4_regulators[] = ' Signed-off-by:
-
Lee Jones authored
It's okay to not check the return value that you're not conserned about, however it is not okay to assign a variable and not check or use the result. Fixes W=1 warnings(s): drivers/regulator/cpcap-regulator.c:172:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 172 | int error, ignore; | ^~~~~~ drivers/regulator/cpcap-regulator.c: In function ‘cpcap_regulator_disable’: drivers/regulator/cpcap-regulator.c:196:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 196 | int error, ignore; | ^~~~~~ Signed-off-by:
-
Lee Jones authored
Kerneldoc expects function arguments to be in the format '@.*:'. If this format is not followed the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 warning(s): drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'wm8350' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'lednum' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'dcdc' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'isink' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'pdata' not described in 'wm8350_register_led' Signed-off-by:
-
