into ppc970.osdl.org:/home/torvalds/v2.6/linux

into kernel.bkbits.net:/home/davem/net-2.6

Signed-off-by: Jamal Hadi Salim <hadi@zynx.com>
Signed-off-by: David S. Miller <davem@redhat.com>

When handling FBIOPUTCMAP_SPARC, sbusfb fails to initialize cmap.transp,
which quickly leads to an oops when fb_set_cmap() dereferences it.

First encountered in Aurora Wombat kernels and seems to afflict mainline
as well. Patch is against 2.6.7-rc2. xorg still fails to actually get
anything to display on my CG6, but at least it no longer oopses the kernel.
Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Signed-off-by: David S. Miller <davem@redhat.com>

into kernel.bkbits.net:/home/davem/net-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This entry in the DMI blacklist table is missing it's NO_MATCH
tags, which means the struct gets padded instead of filled with
the desired NO_MATCH data which is {255, NULL}

Usually not fatal it seems, but there have been numerous cases
in Red Hat bugzilla where this did get tripped up, and caused
an immediate reset on these boards. Not fun to track down.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adds a dummy flush_tlb_page_nohash() called by ptep_set_access_bits(),
to be used if we ever have a ppc64 CPU with software loaded TLB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ARGH. Missed one file. Here is an additional patch (missed tlbflush.h patch)

Sorry.

This adds the definiction of flush_tlb_page_nohash() that was missing
from the previous patch fixing SW-TLB loaded PPCs
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The recent introduction of ptep_set_access_flags() with the optimisation
of not flushing the TLB unfortunately broke ppc32 CPUs with no hash
table.

The data access exception code path in assembly for these doesn't
properly deal with the case where the TLB entry is present with the
wrong PAGE_RW and will just call do_page_fault again instead of just
replacing the TLB entry.

Fixing the asm code for all the different CPU types affected (yah,
embedded PPCs all have different MMUs =P) is painful and need testing I
can't do at the moment, so here's a fix that will just flush the TLB
page when changing the access flags on non-hash based machines.  Please
apply.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org

The scheduler changes had another thing missing: the appreciation of
sync wakeups.  (I had this in one of the earlier sched-domains cleanup
patches before but it got lost in the shuffle.)

When a sync waker is waking, we should subtract its load from the
current load - it will schedule away for sure in the near future. 
That's what the "sync" bit means.

This change is necessary because with the sched-domains balancer we have
a much more sensitive cpu-load estimator, and in this particular context
of try_to_wake_up() the sync waker's effect will always be part of the
load.  Patch against your patch attached. 

In my testing there's an additional increase in bw_pipe numbers on a
dual P2 box, it went from 110-120 MB/sec to 120-130 MB/sec. 
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

watchdog.h is using __u8 and __u32 from linux/types.h, so it needs to
include it.

into nuts.davemloft.net:/disk1/BK/net-2.6

Lets just remove it. It's been disabled some time ago, and there's no
chance of it ever getting resurrected. PATA TCQ has so many technical
short comings, that it was never really interesting I'm afraid.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove dead code from task_in_intr() and pre_task_mulout_intr()
(CONFIG_IDE_TASKFILE_IO=n versions).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- move common code to ide_do_rw_disk()
  (+ always print block number and rq->buffer)
- use pr_debug()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove needless exports from ide.c, ide-probe.c and ide-proc.c.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Christoph Hellwig <hch@lst.de>

To be useful for distribution kernels it needs to be a runtime option.
The original patch is from Joerg Platte via the Debian kernel package,
with some adjustments from me (and me too - Bart).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Geert Uytterhoeven wrote:

  While compiling drivers/char/ipmi/ipmi_si_intf.c in 2.6.6-rc1 on m68k,
  I noticed a missing include (needed for disable_irq_nosync() and
  enable_irq()):

  Furthermore none of CONFIG_ACPI_INTERPETER, CONFIG_X86, and CONFIG_PCI
  were set, and thus IPMI_MEM_ADDR_SPACE and IPMI_IO_ADDR_SPACE are not
  defined, but they are used.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adds support to the jedec probe for ST M50FW040, M50FW080 and M50FW016 all
Firmware hubs for i8x0 chipsets,
http://www.st.com/stonline/products/families/memories/fl_nor/fl_fwh.htm

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Presently we get procfs warnings from ipmi_si.ko due to its failing to
remove all of a /proc directory's contents prior to removing that
directory.

This patch tracks all proc entries for an IPMI interface and unregisters
them all upon removal.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Colin Leroy <colin@colino.net>

Paulus brought this up on IRC, it seems to be a bad DRM merge: The code

#ifndef VMAP_4_ARGS
       if ( dev->agp->cant_use_aperture )
               return -EINVAL;
#endif

in DRM(agp_acquire) should be removed altogether in a 2.6 kernel because
its vmap() takes 4 arguments; however, only the guards seem to have been
removed, which causes this function to erroneously fail if the AGP aperture
can't be directly accessed by the CPU.
Signed-off-by: Colin Leroy <colin@colino.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The attached patch fixes the EDID parsing for PPC on rivafb.  It actually
finds the EDID info in the OF Tree now.  I grabbed this from BenHs Tree as
of 2.6.5-rc3.  The current code has no chance to work since it doesn't walk
the device tree.  This helps rivafb on PPC at least a bit further...
Signed-off-by: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

David Mosberger noticed bw_pipe was way down on sched-domains kernels on
SMP systems.

That is due to two things: first, the previous wake-affine logic would
*always* move a pipe wakee onto the waker's CPU.  With the scheduler
rework, this was toned down a lot (but extended to all types of wakeups).

One of the ways this was damped was with the logic: don't move the wakee if
its CPU is relatively idle compared to the waker's CPU.  Without this, some
workloads would pile everything up onto a few CPUs and get lots of idle
time.

However, the fix was a bit of a blunt hack: if the wakee runqueue was below
50% busy, and the waker's was above 50% busy, we wouldn't do the move.  I
think a better way to capture it is what this patch does: if the wakee
runqueue is below 100% busy, and the sum of the two runqueue's loads is
above 100% busy, and the wakee runqueue is less busy than the waker
runqueue (ie.  CPU utilisation would drop if we do the move), then we don't
do the move.

After I fixed this, I found things were still getting bounced around quite
a bit.  The reason is that we were attempting very aggressive idle
balancing in order to cut down idle time in a dbt2-pgsql workload, which is
particularly sensitive to idle.

After having Mark Wong (markw@osdl.org) retest this load with this patch,
it looks like we don't need to be so aggressive.  I'm glad to be rid of
this because it never sat too well with me.  We should see slightly lower
cost of schedule and slightly improved cache impact with this change too.

Mark said:
---
        This looks pretty good:

        metric  kernel
        2334    2.6.7-rc2
        2298    2.6.7-rc2-mm2
        2329    2.6.7-rc2-mm2-sched-more-wakeaffine
---
ie. within the noise.

David said:
---
        Oooh, me likeee!

        Host                OS  Pipe AF
                                     UNIX
        --------- ------------- ---- ----
        caldera.h   Linux 2.6.6 3424 2057       (plain 2.6.6)
        caldera.h Linux 2.6.7-r 333. 1402       (original 2.6.7-rc1)
        caldera.h Linux 2.6.7-r 3086 4301       (2.6.7-rc1 with your patch)

        Pipe-bandwidth is still down about 10% but that may be due to
        unrelated changes (or perhaps warmup effects?).  The AF UNIX bandwidth
        is just mindboggling.  Moreover, with your patch 2.6.7-rc1 shows
        better context-switch times and lower communication latencies (more
        like the numbers you're getting on UP).

        So it seems like the overall balance of keeping things on the same CPU
        vs. distributing them across CPUs is improved.
---

I also ran some tests on the NUMAQ. kernbench, dbench, hackbench, reaim
were much the same. tbench was improved, very much so when clients < NR_CPU.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This condtion on this loop is primarily to avoid the loop if it doesn't
appear to be needed.  However it optimises a little too much and there is a
case where it skips the loop when it is really needed.  This patch fixes
it.
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There's a bad length check in cdrom_get_random_writable(), it's off-by-4
since fh->data_len is the length of data _after_ that field (which is
offset 4 bytes in the header).  Check is pretty bogus anyways, so just kill
it.
Signed-Off-By: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* Fix cleanup on driver init failure (call pci_unregister_driver if
  necessary)

* Keep driver loaded if no hardware found (for dynid support)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>