Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2020-05-21

This series contains updates to igc and e1000.

Andre cleans up code that was left over from the igb driver that handled
MAC address filters based on the source address, which is not currently
supported.  Simplifies the MAC address filtering code and prepare the
igc driver for future source address support.  Updated the MAC address
filter internal APIs to support filters based on source address.  Added
support for Network Flow Classification (NFC) rules based on source MAC
address.  Cleaned up the 'cookie' field which is not used anywhere in
the code and cleaned up a wrapper function that was not needed.
Simplified the filtering code for readability and aligned the ethtool
functions, so that function names were consistent.

Alex provides a fix for e1000 to resolve a deadlock issue when NAPI is
being disabled.

Sasha does additional cleanup of the igc driver of dead code that is not
used or needed.

v2: Fix the function header comment in patch 3 of the series, based on
    the feedback from Jakub Kicinski.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Oleksij Rempel says:

====================
provide KAPI for SQI

This patches are extending ethtool netlink interface to export Signal
Quality Index (SQI). SQI provided by 100Base-T1 PHYs and can be used for
cable diagnostic. Compared to a typical cable tests, this value can be
only used after link is established.

changes v3:
- rename __ethtool_get_sqi* to linkstate_get_sqi*. And move this
  functions to the net/ethtool/linkstate.c
- protect linkstate_get_sqi* with locking

changes v2:
- use u32 instead of u8 for SQI
- add SQI_MAX field and callbacks
- some style fixes in the rst.
- do not convert index to shifted index.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch implements reading of the Signal Quality Index for better
cable/link troubleshooting.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signal Quality Index is a mandatory value required by "OPEN Alliance
SIG" for the 100Base-T1 PHYs [1]. This indicator can be used for cable
integrity diagnostic and investigating other noise sources and
implement by at least two vendors: NXP[2] and TI[3].

[1] http://www.opensig.org/download/document/218/Advanced_PHY_features_for_automotive_Ethernet_V1.0.pdf
[2] https://www.nxp.com/docs/en/data-sheet/TJA1100.pdf
[3] https://www.ti.com/product/DP83TC811R-Q1Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuval Basson says:

====================
qed: Add xrc core support for RoCE

This patch adds support for configuring XRC and provides the necessary
APIs for rdma upper layer driver (qedr) to enable the XRC feature.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for XRC-SRQ's and XRC-QP's for upper layer driver.

We maintain separate bitmaps for resource management for srq and
xrc-srq, However, the range in FW is one, The xrc-srq's are first
and then the srq's follow. Therefore we maintain a srq-id offset.

v2: perform cleanups if XRC bitmpas allocation fail.
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Bason <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

First ILT page for TSDM client is allocated for XRC-SRQ's.
For regular SRQ's skip first ILT page that is reserved for
XRC-SRQ's.
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Bason <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, psample can only send the packet bits after decapsulation.
The tunnel information is lost. Add the tunnel support.

If the sampled packet has no tunnel info, the behavior is the same as
before. If it has, add a nested metadata field named PSAMPLE_ATTR_TUNNEL
and include the tunnel subfields if applicable.

Increase the metadata length for sampled packet with the tunnel info.
If new subfields of tunnel info should be included, update the metadata
length accordingly.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Every time we access the 'etype' and 'vlan_tci' fields from struct
igc_nfc_filter to enable or disable filters in hardware we have to
convert them from big endian to host order so it makes more sense to
simply have these fields in host order.

The byte order conversion should take place in igc_ethtool_get_nfc_
rule() and igc_ethtool_add_nfc_rule(), which are called by .get_rxnfc
and .set_rxnfc ethtool ops, since ethtool subsystem is the one who deals
with them in big endian order.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The Network Flow Classification (NFC) support code from IGC driver uses
terms such as 'rule', 'filter', 'entry', 'input' interchangeably when
referring to NFC rules, making it harder to follow the code. This patch
renames IGC's internal APIs, structs, and variables so we stick with the
term 'rule' since this is the term used in ethtool APIs. It also removes
some not applicable comments along the way. No functionality is changed
by this patch.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds the prefix 'igc_ethtool_' to all functions defined in
igc_ethtool.c so they align with the name convention already followed by
other parts of the driver (e.g. igc_tsn, igc_ptp). Also, this avoids
some name clashing with functions added to igc_main.c by upcoming
patches in this series. No functionality is changed by this patch, just
function renaming.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch re-writes the second half of igc_ethtool_get_nfc_entry() to
follow the 'return early' pattern seen in other parts of the driver and
removes some duplicate comments.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch does a trivial change in igc_ethtool_get_rxnfc() and
igc_ethtool_set_rxnfc() to simplify their logic.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The local function igc_max_channels() is a pointless wrapper around
igc_get_max_rss_queues(). This patch removes it and updates the callers
accordingly. It also does some cleanup on igc_get_max_rss_queues().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The 'cookie' field is not used anywhere in the code so this patch
removes it from struct igc_nfc_filter.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Per queue good transmitted packet counter not applicable for i225 device.
This patch comes to clean up this register.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Header redirection missed packet counter not applicable for i225 device.
This patch comes to clean up this register.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Part of circuit breaker registers is obsolete
and not applicable for i225 device.
This patch comes to clean up these registers.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking
over the kernel function trace of the system it appears that the interface
is being closed and then a reset is hitting which deadlocks the interface
as the NAPI interface is already disabled.

To prevent this from happening I am disabling the reset task when
__E1000_DOWN is already set. In addition code has been added so that we set
the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in
order to guarantee that the reset task will not run after we have started
the close call.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: Maxim Zhukov <mussitantesmortem@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds support for Network Flow Classification (NFC) rules
based on source MAC address. Note that the controller doesn't support
rules with both source and destination addresses set, so this special
case is checked in igc_add_ethtool_nfc_entry().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch extends MAC address filter internal APIs igc_add_mac_filter()
and igc_del_mac_filter(), as well as local helpers, to support filters
based on source address.

A new parameters 'type' is added to the APIs to indicate if the filter
type is source or destination. In case it is source type, the RAH
register is configured accordingly in igc_set_mac_filter_hw().
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

In igc_adapter we keep a sort of shadow copy of RAL and RAH registers.
There is not much benefit in keeping it, at the cost of maintainability,
since adding/removing MAC address filters is not hot path, and we
already keep filters information in adapter->nfc_filter_list for cleanup
and restoration purposes.

So in order to simplify the MAC address filtering code and prepare it
for source address support, this patch removes the mac_table from
igc_adapter.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

MAC address filters based on source address are not currently supported
by the IGC driver. Despite of that, the driver have some dangling code
to handle it, inherited from IGB driver. This patch removes that code to
prepare for a follow up patch that adds proper source MAC address filter
support.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2020-05-19

This series contains updates to igc only.

Sasha cleans up the igc driver code that is not used or needed.

Vitaly cleans up driver code that was used to support Virtualization on
a device that is not supported by igc, so remove the dead code.

Andre renames a few macros to align with register and field names
described in the data sheet.  Also adds the VLAN Priority Queue Fliter
and EType Queue Filter registers to the list of registers dumped by
igc_get_regs().  Added additional debug messages and updated return codes
for unsupported features.  Refactored the VLAN priority filtering code to
move the core logic into igc_main.c.  Cleaned up duplicate code and
useless code.
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Al Viro says:

====================
uaccess-related stuff in net/*

Assorted uaccess-related work in net/*.  First, there's
getting rid of compat_alloc_user_space() mess in MCAST_...
[gs]etsockopt() - no need to play with copying to/from temporary
object on userland stack, etc., when ->compat_[sg]etsockopt()
instances in question can easly do everything without that.
That's the first 13 patches.  Then there's a trivial bit in
net/batman-adv (completely unrelated to everything else) and
finally getting the atm compat ioctls into simpler shape.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and sod the compat_alloc_user_space() with its complications
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

atm_dev_ioctl() does copyin in two different ways - one for
ATM_GETNAMES, another for everything else.  Start with separating
the former into a new helper (atm_getnames()).  The next step
will be to lift the copyin into the callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

address is passed only to copy_to_user()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

not used anymore
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Native ->setsockopt() handling of these options (MCAST_..._SOURCE_GROUP
and MCAST_{,UN}BLOCK_SOURCE) consists of copyin + call of a helper that
does the actual work.  The only change needed for ->compat_setsockopt()
is a slightly different copyin - the helpers can be reused as-is.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

direct parallel to the way these two are handled in the native
->setsockopt() instances - the helpers that do the real work
are already separated and can be reused as-is in this case.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

similar to the ipv4 counterpart of that patch - the same
trick used to align the tail array properly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

that way we'll be able to reuse it for compat case
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Parallel to what the native setsockopt() does, except that unlike
the native setsockopt() we do not use memdup_user() - we want
the sockaddr_storage fields properly aligned, so we allocate
4 bytes more and copy compat_group_filter at the offset 4,
which yields the proper alignments.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>