Pull timer updates from Thomas Gleixner:
 "The timer departement provides:

   - More y2038 work in the area of ntp and pps.

   - Optimization of posix cpu timers

   - New time related selftests

   - Some new clocksource drivers

   - The usual pile of fixes, cleanups and improvements"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  timeconst: Update path in comment
  timers/x86/hpet: Type adjustments
  clocksource/drivers/armada-370-xp: Implement ARM delay timer
  clocksource/drivers/tango_xtal: Add new timer for Tango SoCs
  clocksource/drivers/imx: Allow timer irq affinity change
  clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr()
  clocksource/drivers/h8300_*: Remove unneeded memset()s
  clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()
  clocksource/drivers/em_sti: Remove unneeded memset()s
  clocksource/drivers/mediatek: Use GPT as sched clock source
  clockevents/drivers/mtk: Fix spurious interrupt leading to crash
  posix_cpu_timer: Reduce unnecessary sighand lock contention
  posix_cpu_timer: Convert cputimer->running to bool
  posix_cpu_timer: Check thread timers only when there are active thread timers
  posix_cpu_timer: Optimize fastpath_timer_check()
  timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments
  timers: Use __fls in apply_slack()
  clocksource: Remove return statement from void functions
  net: sfc: avoid using timespec
  ntp/pps: use y2038 safe types in pps_event_time
  ...

Pull ARM updates from Russell King:
 "In this ARM merge, we remove more lines than we add.  Changes include:

   - Enable imprecise aborts early, so that bus errors aren't masked
     until later in the boot.  This has the side effect that boot
     loaders which provoke these aborts can cause the kernel to crash
     early in boot, so we install a handler to report this event around
     the site where these are enabled.

   - Remove the buggy but impossible to enable cmpxchg syscall code.

   - Add unwinding annotations to some assembly code.

   - Add support for atomic half-word exchange for ARMv6k+.

   - Reduce ioremap() alignment for SMP/LPAE cases where we don't need
     the large alignment.

   - Addition of an "optimal" 3G configuration for systems with 1G of
     RAM.

   - Increase vmalloc space by 128M.

   - Constify some SMP operations structures, which have never been
     writable.

   - Improve ARMs dma_mmap() support for mapping DMA coherent mappings
     into userspace.

   - Fix to the NMI backtrace code in the IPI case on ARM where the
     failing CPU gets stuck for 10s waiting for its own IPI to be
     delivered.

   - Removal of legacy PM support from the AMBA bus driver.

   - Another fix for the previous fix of vdsomunge"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: 8449/1: fix bug in vdsomunge swab32 macro
  arm: add missing of_node_put
  ARM: 8447/1: catch pending imprecise abort on unmask
  ARM: 8446/1: amba: Remove unused callbacks for legacy system PM
  ARM: 8443/1: Adding support for atomic half word exchange
  ARM: clean up TWD after previous patch
  ARM: 8441/2: twd: Don't set CLOCK_EVT_FEAT_C3STOP unconditionally
  ARM: 8440/1: remove obsolete documentation
  ARM: make highpte an expert option
  ARM: 8433/1: add a VMSPLIT_3G_OPT config option
  ARM: 8439/1: Fix backtrace generation when IPI is masked
  ARM: 8428/1: kgdb: Fix registers on sleeping tasks
  ARM: 8427/1: dma-mapping: add support for offset parameter in dma_mmap()
  ARM: 8426/1: dma-mapping: add missing range check in dma_mmap()
  ARM: remove user cmpxchg syscall
  ARM: 8438/1: Add unwinding to __clear_user_std()
  ARM: 8436/1: hw_breakpoint: remove unnecessary header
  ARM: 8434/2: Revert "7655/1: smp_twd: make twd_local_timer_of_register() no-op for nosmp"
  ARM: 8432/1: move VMALLOC_END from 0xff000000 to 0xff800000
  ARM: 8430/1: use default ioremap alignment for SMP or LPAE
  ...

Pull ARC updates from Vineet Gupta:

 - Support for new MM features in ARCv2 cores (THP, PAE40) Some generic
   THP bits are touched - all ACKed by Kirill

 - Platform framework updates to prepare for EZChip arrival (still in works)

 - ARC Public Mailing list setup finally (linux-snps-arc@lists.infraded.org)

* tag 'arc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (42 commits)
  ARC: mm: PAE40 support
  ARC: mm: PAE40: tlbex.S: Explicitify the size of pte_t
  ARC: mm: PAE40: switch to using phys_addr_t for physical addresses
  ARC: mm: HIGHMEM: populate high memory from DT
  ARC: mm: HIGHMEM: kmap API implementation
  ARC: mm: preps ahead of HIGHMEM support #2
  ARC: mm: preps ahead of HIGHMEM support
  ARC: mm: use generic macros _BITUL()/_AC()
  ARC: mm: Improve Duplicate PD Fault handler
  MAINTAINERS: Add public mailing list for ARC
  ARC: Ensure DT mem base is same as what kernel is built with
  ARC: boot: Non Master cpus only need to call EARLY_CPU_SETUP once
  ARCv2: smp: [plat-*]: No need to explicitly call mcip_init_smp()
  ARC: smp: Introduce smp hook @init_irq_cpu called for all cores
  ARC: smp: Rename platform hook @init_smp -> @init_cpu_smp
  ARCv2: smp: [plat-*]: No need to explicitly call mcip_init_early_smp()
  ARC: smp: Introduce smp hook @init_early_smp for Master core
  ARC: remove @init_time, @init_irq platform callbacks
  ARC: smp: irqchip: handle IPI as percpu irq like timer
  ARC: boot: Support Halt-on-reset and Run-on-reset SMP booting modes
  ...

Pull CRIS changes from Jesper Nilsson:
 "Mostly another batch of code removal due to move to standard
  frameworks for CRISv32, initial devicetree configuration for a couple
  of boards, and some small fixes for kgdb and time handling"

* tag 'cris-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: Drop reference to get_cmos_time()
  CRIS: Drop code related to obsolete or unused kconfigs
  cris: time: Cleanup of persistent clock stuff
  cris: re-use helpers to dump data in hex format
  CRIS v32: remove old GPIO and LEDs code
  CRIS v32: remove I2C bitbanging driver
  CRIS v32: add ARTPEC-3 and P1343 device trees
  CRIS v32: dev88: add GPIO, LEDs, RTC, temp sensor
  CRIS: add dt-bindings symlink
  CRIS v32: increase NR_IRQS
  cris: arch-v10: kgdb: Add '__used' for static variable is_dyn_brkp
  cris: arch-v10: kgdb: Use BAR instead of DTP0 for register P12
  cris: kgdb: use native hex2bin

Pull avr32 update from Hans-Christian Noren Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: atngw100: remove useless include

Pull m68k update from Geert Uytterhoeven.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/sun3: Use %pM format specifier to print ethernet address

Pull LED updates from Jacek Anaszewski:

 - Move the out-of-LED-tree led-sead3 driver to the LED subsystem.

 - Add 'invert' sysfs attribute to the heartbeat trigger.

 - Add Device Tree support to the leds-netxbig driver and add related DT
   nodes to the kirkwood-netxbig.dtsi and kirkwood-net5big.dts files.
   Remove static LED setup from the related board files.

 - Remove redundant brightness conversion operation from leds-netxbig.

 - Improve leds-bcm6328 driver: improve default-state handling, add more
   init configuration options, print invalid LED instead of warning only
   about maximum LED value.

 - Add a shutdown function for setting gpio-leds into off state when
   shutting down.

 - Fix DT flash timeout property naming in leds-aat1290.txt.

 - Switch to using devm prefixed version of led_classdev_register()
   (leds-cobalt-qube, leds-hp6xx, leds-ot200, leds-ipaq-micro,
   leds-netxbig, leds-locomo, leds-menf21bmc, leds-net48xx, leds-wrap).

 - Add missing of_node_put (leds-powernv, leds-bcm6358, leds-bcm6328,
   leds-88pm860x).

 - Coding style fixes and cleanups: led-class/led-core, leds-ipaq-micro.

* tag 'leds_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (27 commits)
  leds: 88pm860x: add missing of_node_put
  leds: bcm6328: add missing of_node_put
  leds: bcm6358: add missing of_node_put
  powerpc/powernv: add missing of_node_put
  leds: leds-wrap.c: Use devm_led_classdev_register
  leds: aat1290: Fix property naming of flash-timeout-us
  leds: leds-net48xx: Use devm_led_classdev_register
  leds: leds-menf21bmc.c: Use devm_led_class_register
  leds: leds-locomo.c: Use devm_led_classdev_register
  leds: leds-gpio: add shutdown function
  Documentation: leds: update DT bindings for leds-bcm6328
  leds-bcm6328: add more init configuration options
  leds-bcm6328: simplify and improve default-state handling
  leds-bcm6328: print invalid LED
  leds: netxbig: set led_classdev max_brightness
  leds: netxbig: convert to use the devm_ functions
  ARM: mvebu: remove static LED setup for netxbig boards
  ARM: Kirkwood: add LED DT entries for netxbig boards
  leds: netxbig: add device tree binding
  leds: triggers: add invert to heartbeat
  ...

for_each_child_of_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
local idexpression n;
expression e,r;
@@

 for_each_child_of_node(r,n) {
   ...
(
   of_node_put(n);
|
   e = n
|
+  of_node_put(n);
?  break;
)
   ...
 }
... when != n
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

for_each_available_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

for_each_available_child_of_node performs an of_node_get on each
iteration, so a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

for_each_child_of_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use of resource managed function devm_led_classdev_register to
make initialization path simpler. Also removed redundant remove
function.
Signed-off-by: Fida Mohammad <fmthoker@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

flash-timeout-us property name is changed to flash-max-timeout-us.
This patch fixes that name.
Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use devm_led_classdev_register instead of led_classdev_register,
removing the redundant net48xx_led_remove function.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use resource-managed function devm_led_classdev_register instead
of led_classdev_register, consequently remove redundant
menf21bmc_led_remove function.
Also drop the unneeded label err_free_leds.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use resource managed function devm_led_classdev_register to make
initialisation path simpler.
Also removed redundant led_classdev_unregister function.
Signed-off-by: Fida Mohammad <fmthoker@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

add a shutdown function for setting the gpio-leds
into off state when shuting down.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch adds latest DT bindings for leds-bcm6328 init register
configuration.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch simplifies and improves the code related to
default-state handling.
It also changes the code to power off the LEDs by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Print invalid LED instead of warning only about maximum LED value.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch sets the led_classdev max_brightness to the maximum level
value supported by hardware. This allows to get rid of the brightness
conversion operation (from software [0:LED_FULL] to hardware ranges) in
brightness_set().
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch converts the leds-netxbig driver to use the devres functions
devm_gpio_request_one() and devm_led_classdev_register(). This allows to
simplify the code a bit.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Since DT support is now available for the LEDs found on the LaCie
netxbig boards (Kirkwood-based), then the old-fashion netxbig board
setup file is no longer needed. This patch removes this file.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch adds DT entries for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch adds device tree support for the netxbig LEDs.

This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch adds possibility to invert heartbeat blinking.
The inverted LED is more time ON then OFF. It's because it looks
better when the heartbeat LED is next to other LED which is most
time ON. The invert value is exported same way via sysfs in file
invert like oneshot. I get inspiration from this trigger.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Since the API for controlling LED brightness and blinking is defined in
the LED core, move the related timer and work callbacks to the led-core.c,
and initialize them through a new led_core_init API.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Pavel Machek <pavel@ucw.cz>

Fixes the following randconfig problem

leds-sead3.c:(.text+0x7dc): undefined reference to `led_classdev_unregister'
leds-sead3.c:(.text+0x7e8): undefined reference to `led_classdev_unregister'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-leds@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Spaces at the starting of a line are removed, indentation using
tab, instead of space. Also, line width of more than 80 characters
is also taken care of.
Two warnings are left alone to aid better readability.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use of resource-managed function devm_led_classdev_register
instead of led_classdev_register is preferred, consequently
remove redundant function micro_leds_remove.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use resource-managed function devm_led_classdev_register
instead of led_classdev_register to make the error path simpler.
The goto is replaced with direct return, unneeded label err is
dropped. Also, remove redundant ot200_led_remove.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use resource-managed function devm_led_classdev_register
instead of led_classdev_register to simplify error path.
An unnecessary check of ret is replaced with a direct return
Also, remove redundant hp6xxled_remove.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Use resource-managed function devm_led_classdev_register instead
of led_classdev_register to make the error-path simpler.

To be compatible with the change, goto is replaced with direct
return, unneeded label err_null is dropped and unnecessary variable
retval is removed. Also, remove redundant cobalt_qube_led_remove.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>

Pull regmap updates from Mark Brown:
 "Quite a few new features for regmap this time, mostly expanding things
  around the edges of the existing functionality to cover more devices
  rather than thinsg with wide applicability:

   - Support for offload of the update_bits() operation to hardware
     where devices implement bit level access.
   - Support for a few extra operations that need scratch buffers on
     fast_io devices where we can't sleep.
   - Expanded the feature set of regmap_irq to cope with some extra
     register layouts.
   - Cleanups to the debugfs code"

* tag 'regmap-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Allow installing custom reg_update_bits function
  regmap: debugfs: simplify regmap_reg_ranges_read_file() slightly
  regmap: debugfs: use memcpy instead of snprintf
  regmap: debugfs: use snprintf return value in regmap_reg_ranges_read_file()
  regmap: Add generic macro to define regmap_irq
  regmap: debugfs: Remove scratch buffer for register length calculation
  regmap: irq: add ack_invert flag for chips using cleared bits as ack
  regmap: irq: add support for chips who have separate unmask registers
  regmap: Allocate buffers with GFP_ATOMIC when fast_io == true

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for the v4.4 development cycle.

  The only changes hitting outside drivers/gpio are in the pin control
  subsystem and these seem to have settled nicely in linux-next.

  Development mistakes and catfights are nicely documented in the
  reverts as you can see.  The outcome of the ABI fight is that we're
  working on a chardev ABI for GPIO now, where hope to show results for
  the v4.5 kernel.

  Summary of changes:

  GPIO core:
   - Define and handle flags for open drain/open collector and open
     source/open emitter, also know as "single-ended" configurations.
   - Generic request/free operations that handle calling out to the
     (optional) pin control backend.
   - Some refactoring related to an ABI change that did not happen, yet
     provide useful.
   - Added a real-time compliance checklist.  Many GPIO chips have
     irqchips, and need to think this over with the RT patches going
     upstream.
   - Restructure, fix and clean up Kconfig menus a bit.

  New drivers:
   - New driver for AMD Promony.
   - New driver for ACCES 104-IDIO-16, a port-mapped I/O card,
     ISA-style.  Very retro.

  Subdriver changes:
   - OMAP changes to handle real time requirements.
   - Handle trigger types for edge and level IRQs on PL061 properly.  As
     this hardware is very common it needs to set a proper example for
     others to follow.
   - Some container_of() cleanups.
   - Delete the unused MSM driver in favor of the driver that is
     embedded inside the pin control driver.
   - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router
     targets.
   - A consolidated IT87xx driver replacing the earlier very specific
     IT8761e driver.
   - Handle the TI TCA9539 in the PCA953x driver.  Also handle ACPI
     devices in this subdriver.
   - Drop xilinx arch dependencies as these FPGAs seem to profilate over
     a few different architectures.  MIPS and ARM come to mind"

* tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits)
  gpio: fix up SPI submenu
  gpio: drop surplus I2C dependencies
  gpio: drop surplus X86 dependencies
  gpio: dt-bindings: document the official use of "ngpios"
  gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver
  gpio / ACPI: Allow shared GPIO event to be read via operation region
  gpio: group port-mapped I/O drivers in a menu
  gpio: Add ACCES 104-IDIO-16 driver maintainer entry
  gpio: zynq: Document interrupt-controller DT binding
  gpio: xilinx: Drop architecture dependencies
  gpio: generic: Revert to old error handling in bgpio_map
  gpio: add a real time compliance notes
  Revert "gpio: add a real time compliance checklist"
  gpio: Add GPIO support for the ACCES 104-IDIO-16
  gpio: driver for AMD Promontory
  gpio: xlp: Convert to use gpiolib irqchip helpers
  gpio: add a real time compliance checklist
  gpio/xilinx: enable for MIPS
  gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag
  gpiolib: Split GPIO flags parsing and GPIO configuration
  ...

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.4 kernel
  development cycle.  Development pace is high in pin control again this
  merge window.  28 contributors, 83 patches.

  It hits a few sites outside the pin control subsystem:

   - Device tree bindings in Documentation (as usual)
   - MAINTAINERS
   - drivers/base/* for the "init" state handling by Doug Anderson.
     This has been ACKed by Greg.
   - drivers/usb/renesas_usbhs/rcar2.c, for a dependent Renesas change
     in the USB subsystem.  This has been ACKed by both Greg and Felipe.
   - arch/arm/boot/dts/sama5d2.dtsi - this should ideally have gone
     through the ARM SoC tree but ended up here.

  This time I am using Geert Uytterhoeven as submaintainer for SH PFC
  since the are three-four people working in parallel with new Renesas
  ASICs.

  Summary of changes:

  Infrastructure:

   - Doug Anderson wrote a patch adding an "init" state different from
     the "default" state for pin control state handling in the core
     framework.  This is applied before the driver's probe() call if
     defined and takes precedence over "default".  If both are defined,
     "init" will be applied *before* probe() and "default" will be
     applied *after* probe().

  Significant subdriver improvements:

   - SH PFC is switched to getting GPIO ranges from the device tree
     ranges property on DT platforms.
   - Got rid of CONFIG_ARCH_SHMOBILE_LEGACY, we are all modernized.
   - Got rid of SH PFC hardcoded IRQ numbers.
   - Allwinner sunxi external interrupt through the "r" controller.
   - Moved the Cygnus driver to use DT-provided GPIO ranges.

  New drivers:

   - Atmel PIO4 pin controller for the SAMA4D2 family

  New subdrivers:

   - Rockchip RK3036 subdriver
   - Renesas SH PFC R8A7795 subdriver
   - Allwinner sunxi A83T PIO subdriver
   - Freescale i.MX7d iomux lpsr subdriver
   - Marvell Berlin BG4CT subdriver
   - SiRF Atlas 7 step B SoC subdriver
   - Intel Broxton SoC subdriver

  Apart from this, the usual slew if syntactic and semantic fixes"

* tag 'pinctrl-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (81 commits)
  pinctrl: pinconf: remove needless loop
  pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER
  pinctrl: zynq: fix UTF-8 errors
  pinctrl: zynq: Initialize early
  pinctrl: at91: add missing of_node_put
  pinctrl: tegra-xusb: Correct lane mux options
  pinctrl: intel: Add Intel Broxton pin controller support
  pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs
  pinctrl: intel: Add support for multiple GPIO chips sharing the interrupt
  drivers/pinctrl: Add the concept of an "init" state
  pinctrl: uniphier: set input-enable before pin-muxing
  pinctrl: cygnus: Add new compatible string for gpio controller driver
  pinctrl: cygnus: Remove GPIO to Pinctrl pin mapping from driver
  pinctrl: cygnus: Optional DT property to support pin mappings
  pinctrl: sunxi: Add irq pinmuxing to sun6i "r" pincontroller
  pinctrl: sunxi: Fix irq_of_xlate for the r_pio pinctrl block
  pinctrl: sh-pfc: Remove obsolete r8a7778 platform_device_id entry
  pinctrl: sh-pfc: Remove obsolete r8a7779 platform_device_id entry
  pinctrl: sh-pfc: Stop including <linux/platform_data/gpio-rcar.h>
  usb: renesas_usbhs: Remove unneeded #include <linux/platform_data/gpio-rcar.h>
  ...

Pull EDAC updates from Borislav Petkov:
 "A bunch of fixes all over the place and some hw enablement this time.

   - Convert EDAC to debugfs wrappers and make drivers use those
     (Borislav Petkov)

   - L3 and SoC support for xgene_edac (Loc Ho)

   - AMD F15h, models 0x60-6f support to amd64_edac (Aravind
     Gopalakrishnan)

   - Fixes and cleanups all over the place"

* tag 'edac_for_4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
  EDAC: Fix PAGES_TO_MiB macro misuse
  EDAC, altera: SoCFPGA EDAC should not look for ECC_CORR_EN
  EDAC: Use edac_debugfs_remove_recursive()
  EDAC, ppc4xx_edac: Fix module autoload for OF platform driver
  Documentation/EDAC: Add reference documents section for amd64_edac
  EDAC, amd64_edac: Update copyright and remove changelog
  EDAC, amd64_edac: Extend scrub rate support to F15hM60h
  EDAC: Don't allow empty DIMM labels
  EDAC: Fix sysfs dimm_label store operation
  EDAC: Fix sysfs dimm_label show operation
  arm64, EDAC: Add L3/SoC DT subnodes to the APM X-Gene SoC EDAC node
  EDAC, xgene: Add SoC support
  EDAC, xgene: Fix possible sprintf() overflow issue
  EDAC, xgene: Add L3 support
  EDAC, Documentation: Update X-Gene EDAC binding for L3/SoC subnodes
  EDAC, sb_edac: Fix TAD presence check for sbridge_mci_bind_devs()
  EDAC, ghes_edac: Remove redundant memory_type array
  EDAC, xgene: Convert to debugfs wrappers
  EDAC, i5100: Convert to debugfs wrappers
  EDAC, altera: Convert to debugfs wrappers
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add new API to set VCCQ voltage - mmc_regulator_set_vqmmc()
   - Add new ioctl to allow userspace to send multi commands
   - Wait for card busy signalling before starting SDIO requests
   - Remove MMC_CLKGATE
   - Enable tuning for DDR50 mode
   - Some code clean-up/improvements to mmc pwrseq
   - Use highest priority for eMMC restart handler
   - Add DT bindings for eMMC hardware reset support
   - Extend the mmc_send_tuning() API
   - Improve ios show for debugfs
   - A couple of code optimizations

  MMC host:
   - Some generic OF improvements
   - Various code clean-ups
   - sirf: Add support for DDR50
   - sunxi: Add support for card busy detection
   - mediatek: Use MMC_CAP_RUNTIME_RESUME
   - mediatek: Add support for eMMC HW-reset
   - mediatek: Add support for HS400
   - dw_mmc: Convert to use the new mmc_regulator_set_vqmmc() API
   - dw_mmc: Add external DMA interface support
   - dw_mmc: Some various improvements
   - dw_mmc-rockchip: MMC tuning with the clock phase framework
   - sdhci: Properly clear IRQs during resume
   - sdhci: Enable tuning for DDR50 mode
   - sdhci-of-esdhc: Use IRQ mode for card detection
   - sdhci-of-esdhc: Support both BE and LE host controller
   - sdhci-pci: Build o2micro support in the same module
   - sdhci-pci: Support for new Intel host controllers
   - sdhci-acpi: Support for new Intel host controllers"

* tag 'mmc-v4.4' of git://git.linaro.org/people/ulf.hansson/mmc: (73 commits)
  mmc: dw_mmc: fix the wrong setting for UHS-DDR50 mode
  mmc: dw_mmc: fix the CardThreshold boundary at CardThrCtl register
  mmc: dw_mmc: NULL dereference in error message
  mmc: pwrseq: Use highest priority for eMMC restart handler
  mmc: mediatek: add HS400 support
  mmc: mmc: extend the mmc_send_tuning()
  mmc: mediatek: add implement of ops->hw_reset()
  mmc: mediatek: fix got GPD checksum error interrupt when data transfer
  mmc: mediatek: change the argument "ddr" to "timing"
  mmc: mediatek: make cmd_ints_mask to const
  mmc: dt-bindings: update Mediatek MMC bindings
  mmc: core: Add DT bindings for eMMC hardware reset support
  mmc: omap_hsmmc: Enable omap_hsmmc for Keystone 2
  mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers
  mmc: sdhci-pci: Add more PCI IDs for Intel controllers
  arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
  arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
  arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
  mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
  ...