Pull ARM SoC fixes from Olof Johansson:
 "I've been bad at collecting fixes this release cycle, so this is a
  fairly large batch that's been trickling in for a while.

  It's the usual mix, more or less.

  Some of the bigger things fixed:

   - Voltage fix for MMC on TI DRA7 that sometimes would overvoltage
     cards

   - Regression fixes for D_CAN on am355x

   - i.MX6SX cpuidle fix to deal with wakeup latency (dropped uart
     chars)

   - DT fixes for some DRA7 variants that don't share the superset of
     blocks on the chip

  plus the usual mix of stuff: minor build/warning fixes, Kconfig
  dependencies, and some DT fixlets"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
  soc: ixp4xx: npe: Fix an IS_ERR() vs NULL check in probe
  ARM: ixp4xx: include irqs.h where needed
  ARM: ixp4xx: mark ixp4xx_irq_setup as __init
  ARM: ixp4xx: don't select SERIAL_OF_PLATFORM
  firmware: trusted_foundations: add ARMv7 dependency
  MAINTAINERS: Change QCOM repo location
  ARM: davinci: da8xx: specify dma_coherent_mask for lcdc
  ARM: davinci: da850-evm: call regulator_has_full_constraints()
  ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog
  ARM: dts: am335x phytec boards: Fix cd-gpios active level
  ARM: dts: dra72x: Disable usb4_tm target module
  arm64: arch_k3: Fix kconfig dependency warning
  ARM: dts: Drop bogus CLKSEL for timer12 on dra7
  MAINTAINERS: Update Stefan Wahren email address
  ARM: dts: bcm: Add missing device_type = "memory" property
  soc: bcm: brcmstb: biuctrl: Register writes require a barrier
  soc: brcmstb: Fix error path for unsupported CPUs
  ARM: dts: dra71x: Disable usb4_tm target module
  ARM: dts: dra71x: Disable rtc target module
  ARM: dts: dra76x: Disable usb4_tm target module
  ...

Pull stack init fix from Kees Cook:
 "This is a small update to the stack auto-initialization self-test code
  to deal with the Clang initialization pattern.

  It's been in linux-next for a couple weeks; I had waited a bit
  wondering if anything more substantial was going to show up, but
  nothing has, so I'm sending this now before it gets too late"

* tag 'meminit-v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  lib/test_stackinit: Handle Clang auto-initialization pattern

The devm_ioremap_resource() function doesn't return NULL, it returns
error pointers.

Fixes: 0b458d7b ("soc: ixp4xx: npe: Pass addresses as resources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Multiple ixp4xx specific files require macros from irqs.h that
were moved out from mach/irqs.h, e.g.:

arch/arm/mach-ixp4xx/vulcan-pci.c:41:19: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
arch/arm/mach-ixp4xx/vulcan-pci.c:49:10: error: implicit declaration of function 'IXP4XX_GPIO_IRQ' [-Werror,-Wimplicit-function-declaration]
                return IXP4XX_GPIO_IRQ(INTA);

Include this header in all files that failed to build because of
that.

Fixes: dc8ef8cd ("ARM: ixp4xx: Convert to SPARSE_IRQ")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Kbuild complains about ixp4xx_irq_setup not being __init
itself in some configurations:

WARNING: vmlinux.o(.text+0x85bae4): Section mismatch in reference from the function ixp4xx_irq_setup() to the function .init.text:set_handle_irq()
The function ixp4xx_irq_setup() references
the function __init set_handle_irq().
This is often because ixp4xx_irq_setup lacks a __init
annotation or the annotation of set_handle_irq is wrong.

I suspect it normally gets inlined, so we get no such warning,
but clang makes this obvious when the function is left out
of line.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Platforms should not normally select all the device drivers, leave that
up to the user and the defconfig file.

In this case, we get a warning for randconfig builds:

WARNING: unmet direct dependencies detected for SERIAL_OF_PLATFORM
  Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && SERIAL_8250 [=n] && OF [=y]
  Selected by [y]:
  - MACH_IXP4XX_OF [=y] && ARCH_IXP4XX [=y]

Fixes: 9540724c ("ARM: ixp4xx: Add device tree boot support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

The "+sec" extension is invalid for older ARM architectures, but
the code can now be built on any ARM configuration:

/tmp/trusted_foundations-2d0882.s: Assembler messages:
/tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture
/tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode
/tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture
/tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode

Add a dependency on ARMv7 for the build.

Fixes: 4cb5d9ec ("firmware: Move Trusted Foundations support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull vfs fixes from Al Viro:
 "MS_MOVE regression fix + breakage in fsmount(2) (also introduced in
  this cycle, along with fsmount(2) itself).

  I'm still digging through the piles of mail, so there might be more
  fixes to follow, but these two are obvious and self-contained, so
  there's no point delaying those..."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/namespace: fix unprivileged mount propagation
  vfs: fsmount: add missing mntget()

Pull networking fixes from David Miller:
 "Lots of bug fixes here:

   1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.

   2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
      Crispin.

   3) Use after free in psock backlog workqueue, from John Fastabend.

   4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
      Salem.

   5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.

   6) Network header needs to be set for packet redirect in nfp, from
      John Hurley.

   7) Fix udp zerocopy refcnt, from Willem de Bruijn.

   8) Don't assume linear buffers in vxlan and geneve error handlers,
      from Stefano Brivio.

   9) Fix TOS matching in mlxsw, from Jiri Pirko.

  10) More SCTP cookie memory leak fixes, from Neil Horman.

  11) Fix VLAN filtering in rtl8366, from Linus Walluij.

  12) Various TCP SACK payload size and fragmentation memory limit fixes
      from Eric Dumazet.

  13) Use after free in pneigh_get_next(), also from Eric Dumazet.

  14) LAPB control block leak fix from Jeremy Sowden"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
  lapb: fixed leak of control-blocks.
  tipc: purge deferredq list for each grp member in tipc_group_delete
  ax25: fix inconsistent lock state in ax25_destroy_timer
  neigh: fix use-after-free read in pneigh_get_next
  tcp: fix compile error if !CONFIG_SYSCTL
  hv_sock: Suppress bogus "may be used uninitialized" warnings
  be2net: Fix number of Rx queues used for flow hashing
  net: handle 802.1P vlan 0 packets properly
  tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
  tcp: add tcp_min_snd_mss sysctl
  tcp: tcp_fragment() should apply sane memory limits
  tcp: limit payload size of sacked skbs
  Revert "net: phylink: set the autoneg state in phylink_phy_change"
  bpf: fix nested bpf tracepoints with per-cpu data
  bpf: Fix out of bounds memory access in bpf_sk_storage
  vsock/virtio: set SOCK_DONE on peer shutdown
  net: dsa: rtl8366: Fix up VLAN filtering
  net: phylink: set the autoneg state in phylink_phy_change
  net: add high_order_alloc_disable sysctl/static key
  tcp: add tcp_tx_skb_cache sysctl
  ...

When propagating mounts across mount namespaces owned by different user
namespaces it is not possible anymore to move or umount the mount in the
less privileged mount namespace.

Here is a reproducer:

  sudo mount -t tmpfs tmpfs /mnt
  sudo --make-rshared /mnt

  # create unprivileged user + mount namespace and preserve propagation
  unshare -U -m --map-root --propagation=unchanged

  # now change back to the original mount namespace in another terminal:
  sudo mkdir /mnt/aaa
  sudo mount -t tmpfs tmpfs /mnt/aaa

  # now in the unprivileged user + mount namespace
  mount --move /mnt/aaa /opt

Unfortunately, this is a pretty big deal for userspace since this is
e.g. used to inject mounts into running unprivileged containers.
So this regression really needs to go away rather quickly.

The problem is that a recent change falsely locked the root of the newly
added mounts by setting MNT_LOCKED. Fix this by only locking the mounts
on copy_mnt_ns() and not when adding a new mount.

Fixes: 3bd045cc ("separate copying and locking mount tree on cross-userns copies")
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Tested-by: Christian Brauner <christian@brauner.io>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

sys_fsmount() needs to take a reference to the new mount when adding it
to the anonymous mount namespace.  Otherwise the filesystem can be
unmounted while it's still in use, as found by syzkaller.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: syzbot+99de05d099a170867f22@syzkaller.appspotmail.com
Reported-by: syzbot+7008b8b8ba7df475fdc8@syzkaller.appspotmail.com
Fixes: 93766fbd ("vfs: syscall: Add fsmount() to create a mount for a superblock")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Eric Dumazet says:

====================
tcp: make sack processing more robust

Jonathan Looney brought to our attention multiple problems
in TCP stack at the sender side.

SACK processing can be abused by malicious peers to either
cause overflows, or increase of memory usage.

First two patches fix the immediate problems.

Since the malicious peers abuse senders by advertizing a very
small MSS in their SYN or SYNACK packet, the last two
patches add a new sysctl so that admins can chose a higher
limit for MSS clamping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull RISC-V fixes from Paul Walmsley:
 "This contains fixes, defconfig, and DT data changes for the v5.2-rc
  series.

  The fixes are relatively straightforward:

   - Addition of a TLB fence in the vmalloc_fault path, so the CPU
     doesn't enter an infinite page fault loop

   - Readdition of the pm_power_off export, so device drivers that
     reassign it can now be built as modules

   - A udelay() fix for RV32, fixing a miscomputation of the delay time

   - Removal of deprecated smp_mb__*() barriers

  This also adds initial DT data infrastructure for arch/riscv, along
  with initial data for the SiFive FU540-C000 SoC and the corresponding
  HiFive Unleashed board.

  We also update the RV64 defconfig to include some core drivers for the
  FU540 in the build"

* tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: remove unused barrier defines
  riscv: mm: synchronize MMU after pte change
  riscv: dts: add initial board data for the SiFive HiFive Unleashed
  riscv: dts: add initial support for the SiFive FU540-C000 SoC
  dt-bindings: riscv: convert cpu binding to json-schema
  dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540
  arch: riscv: add support for building DTB files from DT source data
  riscv: Fix udelay in RV32.
  riscv: export pm_power_off again
  RISC-V: defconfig: enable clocks, serial console

They were introduced in commit fab957c1 ("RISC-V: Atomic and
Locking Code") long after commit 2e39465a ("locking: Remove
deprecated smp_mb__() barriers") removed the remnants of all previous
instances from the tree.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
[paul.walmsley@sifive.com: stripped spurious mbox header from patch
 description; fixed commit references in patch header]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

This patch updates the Qualcomm SoC repo to a new location.
Signed-off-by: Andy Gross <agross@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Because RISC-V compliant implementations can cache invalid entries
in TLB, an SFENCE.VMA is necessary after changes to the page table.
This patch adds an SFENCE.vma for the vmalloc_fault path.
Signed-off-by: ShihPo Hung <shihpo.hung@sifive.com>
[paul.walmsley@sifive.com: reversed tab->whitespace conversion,
 wrapped comment lines]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-riscv@lists.infradead.org
Cc: stable@vger.kernel.org

Add initial board data for the SiFive HiFive Unleashed A00.

Currently the data populated in this DT file describes the board
DRAM configuration and the external clock sources that supply the
PRCI.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

Add initial support for the SiFive FU540-C000 SoC.  This is a 28nm SoC
based around the SiFive U54-MC core complex and a TileLink
interconnect.

This file is expected to grow as more device drivers are added to the
kernel.

This patch includes a fix to the QSPI memory map due to a
documentation bug, found by ShihPo Hung <shihpo.hung@sifive.com>, adds
entries for the I2C controller, and merges all DT changes that
formerly were made dynamically by the riscv-pk BBL proxy kernel.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: ShihPo Hung <shihpo.hung@sifive.com>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

At Rob's request, we're starting to migrate our DT binding
documentation to json-schema YAML format.  Start by converting our cpu
binding documentation.  While doing so, document more properties and
nodes.  This includes adding binding documentation support for the E51
and U54 CPU cores ("harts") that are present on this SoC.  These cores
are described in:

    https://static.dev.sifive.com/FU540-C000-v1.0.pdf

This cpus.yaml file is intended to be a starting point and to
evolve over time.  It passes dt-doc-validate as of the yaml-bindings
commit 4c79d42e9216.

This patch was originally based on the ARM json-schema binding
documentation as added by commit 672951cb ("dt-bindings: arm: Convert
cpu binding to json-schema").
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-riscv@lists.infradead.org

Add YAML DT binding documentation for the SiFive FU540 SoC.  This
SoC is documented at:

    https://static.dev.sifive.com/FU540-C000-v1.0.pdf

Passes dt-doc-validate, as of yaml-bindings commit 4c79d42e9216.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org

Similar to ARM64, add support for building DTB files from DT source
data for RISC-V boards.

This patch starts with the infrastructure needed for SiFive boards.
Boards from other vendors would add support here in a similar form.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Loys Ollivier <lollivier@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>

lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.

lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.

However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.

Call lapb_put after __lapb_devtostruct to fix leak.

Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reported a memleak caused by grp members' deferredq list not
purged when the grp is be deleted.

The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in
tipc_group_filter_msg() and the skb will stay in deferredq.

So fix it by calling __skb_queue_purge for each member's deferredq
in tipc_group_delete() when a tipc sk leaves the grp.

Fixes: b87a5ea3 ("tipc: guarantee group unicast doesn't bypass group broadcast")
Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before thread in process context uses bh_lock_sock()
we must disable bh.

sysbot reported :

WARNING: inconsistent lock state
5.2.0-rc3+ #32 Not tainted

inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
{SOFTIRQ-ON-W} state was registered at:
  lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
  __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
  _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
  spin_lock include/linux/spinlock.h:338 [inline]
  ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
  ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
  __sys_connect+0x264/0x330 net/socket.c:1834
  __do_sys_connect net/socket.c:1845 [inline]
  __se_sys_connect net/socket.c:1842 [inline]
  __x64_sys_connect+0x73/0xb0 net/socket.c:1842
  do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 2272
hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(slock-AF_AX25);
  <Interrupt>
    lock(slock-AF_AX25);

 *** DEADLOCK ***

1 lock held by blkid/26581:
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312

stack backtrace:
CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
 valid_state kernel/locking/lockdep.c:2948 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
 mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
 mark_irqflags kernel/locking/lockdep.c:3391 [inline]
 __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:338 [inline]
 ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
 expire_timers kernel/time/timer.c:1366 [inline]
 __run_timers kernel/time/timer.c:1685 [inline]
 __run_timers kernel/time/timer.c:1653 [inline]
 run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
 __do_softirq+0x25c/0x94c kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
 </IRQ>
RIP: 0033:0x7f858d5c3232
Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nine years ago, I added RCU handling to neighbours, not pneighbours.
(pneigh are not commonly used)

Unfortunately I missed that /proc dump operations would use a
common entry and exit point : neigh_seq_start() and neigh_seq_stop()

We need to read_lock(tbl->lock) or risk use-after-free while
iterating the pneigh structures.

We might later convert pneigh to RCU and revert this patch.

sysbot reported :

BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825

CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
 seq_read+0x9cf/0x1110 fs/seq_file.c:258
 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
 do_loop_readv_writev fs/read_write.c:714 [inline]
 do_loop_readv_writev fs/read_write.c:701 [inline]
 do_iter_read+0x4a4/0x660 fs/read_write.c:935
 vfs_readv+0xf0/0x160 fs/read_write.c:997
 kernel_readv fs/splice.c:359 [inline]
 default_file_splice_read+0x475/0x890 fs/splice.c:414
 do_splice_to+0x127/0x180 fs/splice.c:877
 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
 do_sendfile+0x597/0xd00 fs/read_write.c:1464
 __do_sys_sendfile64 fs/read_write.c:1525 [inline]
 __se_sys_sendfile64 fs/read_write.c:1511 [inline]
 __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff

Allocated by task 9827:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_kmalloc mm/kasan/common.c:489 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
 __do_kmalloc mm/slab.c:3660 [inline]
 __kmalloc+0x15c/0x740 mm/slab.c:3669
 kmalloc include/linux/slab.h:552 [inline]
 pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
 arp_req_set_public net/ipv4/arp.c:1010 [inline]
 arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
 sock_ioctl+0x3ed/0x780 net/socket.c:1194
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9824:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
 __cache_free mm/slab.c:3432 [inline]
 kfree+0xcf/0x220 mm/slab.c:3755
 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
 __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
 inetdev_destroy net/ipv4/devinet.c:319 [inline]
 inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
 __raw_notifier_call_chain kernel/notifier.c:396 [inline]
 raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
 call_netdevice_notifiers net/core/dev.c:1775 [inline]
 rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
 rollback_registered+0x109/0x1d0 net/core/dev.c:8220
 unregister_netdevice_queue net/core/dev.c:9267 [inline]
 unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
 unregister_netdevice include/linux/netdevice.h:2631 [inline]
 __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
 tun_detach drivers/net/tun.c:741 [inline]
 tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:185 [inline]
 exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
 do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888097f2a700
 which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
 64-byte region [ffff888097f2a700, ffff888097f2a740)
The buggy address belongs to the page:
page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
 ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                   ^
 ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_tx_skb_cache_key and tcp_rx_skb_cache_key must be available
even if CONFIG_SYSCTL is not set.

Fixes: 0b7d7f6b ("tcp: add tcp_tx_skb_cache sysctl")
Fixes: ede61ca4 ("tcp: add tcp_rx_skb_cache sysctl")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gcc 8.2.0 may report these bogus warnings under some condition:

warning: ‘vnew’ may be used uninitialized in this function
warning: ‘hvs_new’ may be used uninitialized in this function

Actually, the 2 pointers are only initialized and used if the variable
"conn_from_host" is true. The code is not buggy here.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Number of Rx queues used for flow hashing returned by the driver is
incorrect and this bug prevents user to use the last Rx queue in
indirection table.

Let's say we have a NIC with 6 combined queues:

[root@sm-03 ~]# ethtool -l enp4s0f0
Channel parameters for enp4s0f0:
Pre-set maximums:
RX:             5
TX:             5
Other:          0
Combined:       6
Current hardware settings:
RX:             0
TX:             0
Other:          0
Combined:       6

Default indirection table maps all (6) queues equally but the driver
reports only 5 rings available.

[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
    0:      0     1     2     3     4     5     0     1
    8:      2     3     4     5     0     1     2     3
   16:      4     5     0     1     2     3     4     5
   24:      0     1     2     3     4     5     0     1
...

Now change indirection table somehow:

[root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
[root@sm-03 ~]# ethtool -x enp4s0f0
RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
    0:      0     0     0     0     0     0     0     0
...
   64:      1     1     1     1     1     1     1     1
...

Now it is not possible to change mapping back to equal (default) state:

[root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
Cannot set RX flow hash configuration: Invalid argument

Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options")
Reported-by: Tianhao <tizhao@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When stack receives pkt: [802.1P vlan 0][802.1AD vlan 100][IPv4],
vlan_do_receive() returns false if it does not find vlan_dev. Later
__netif_receive_skb_core() fails to find packet type handler for
skb->protocol 801.1AD and drops the packet.

801.1P header with vlan id 0 should be handled as untagged packets.
This patch fixes it by checking if vlan_id is 0 and processes next vlan
header.
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'omap-for-v5.2/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omap variants

Three fixes mostly for dra7 SoC variants that have some devices disabled
compared to the base SoC. These got broken by the change of making devices
probe with ti-sysc interconnect target module and went unnnoticed for a
while. And there is no clkcel bit for timer12 unlike timer1. Also included
is a GPIO direction fix for phytec SDIO card detection.

* tag 'omap-for-v5.2/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x phytec boards: Fix cd-gpios active level
  ARM: dts: dra72x: Disable usb4_tm target module
  ARM: dts: Drop bogus CLKSEL for timer12 on dra7
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-fixes-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

DaVinci fixes for v5.2 kernel.

This addresses an issue with probe of IO expander on DA850 EVM. There is
also a WARN_ON() fix on DA850 and DA830 devices.

* tag 'davinci-fixes-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx: specify dma_coherent_mask for lcdc
  ARM: davinci: da850-evm: call regulator_has_full_constraints()
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu fixes for 5.2 (part 1)

Fixing defconfig allowing to use Ethernet again on Armada 38x based
boards

* tag 'mvebu-fixes-5.2-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'am654-fixes-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into fixes

Texas Instruments AM65x fixes for v5.2

- Fix up a Kbuild warning when SOC_TI is not set

* tag 'am654-fixes-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
  arm64: arch_k3: Fix kconfig dependency warning
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.2-rc1, please pull the following:

- Florian fixes the remaining Broadcom DTS files to have a valid
device_type = "memory" property which was missed during the removal of
skeleton.dtsi

* tag 'arm-soc/for-5.2/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm: Add missing device_type = "memory" property
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omap variants for dra7 mmc voltage and boot issues

This series contains dra7 mmc voltage fixes, and fixes to the recent
changes to probe devices with device tree data insteas of legacy
platform data:

- Two fixes for dra7 mmc that needs 1.8V mode disabled as in case of a
  reset, the bootrom will try to access the mmc card at 3.3V potentially
  damaging the card

- Two regression fixes for am335x d_can. We must allow devices with no
  control registers for ti-sysc interconnect target module driver for
  at least d_can, and we remove the incorrect control registers for
  d_can. And we must configure the osc clock for d_can as otherwise
  register access may fail depending on the bootloader version

- Four regression fixes for dra7 variant dts files to tag rtc and usb4
  as disabled for dra71x and dra76x. These SoC variants do not have
  these devices, and got accidentally enabled when the L4 interconnect
  got defined in the dra7-l4.dtsi for the dra7 SoC family

* tag 'omap-for-v5.2/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra71x: Disable usb4_tm target module
  ARM: dts: dra71x: Disable rtc target module
  ARM: dts: dra76x: Disable usb4_tm target module
  ARM: dts: dra76x: Disable rtc target module
  ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values
  ARM: dts: am57xx-idk: Remove support for voltage switching for SD card
  bus: ti-sysc: Handle devices with no control registers
  ARM: dts: Configure osc clock for d_can on am335x
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

i.MX fixes for 5.2:
 - A build fix for soc-imx8 driver which needs SOC_BUS support.  To
   avoid dealing with the dependency for every single i.MX SoC bus
   driver, we selects at from architecture level.
 - A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only
   after IPC is ready.
 - A regression fix on cpuidle-imx6sx driver, which causes some
   characters loss on serial communication.

* tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX
  firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready
  arm64: imx: Fix build error without CONFIG_SOC_BUS
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains MAINTAINERS file update for Broadcom
ARM/ARM64 SoCs, please pull the following:

- Stefan updates his email address under the BCM2835 entry

* tag 'arm-soc/for-5.2/maintainers' of https://github.com/Broadcom/stblinux:
  MAINTAINERS: Update Stefan Wahren email address
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM/ARM64/MIPS SoCs device drivers
fixes for 5.2-rc1, please pull the following:

- Florian fixes the biuctrl driver not to create an error condition/path
  upon unsupported CPU and also fixes the biuctrl driver writes to used
  a data barrier which is necessary given the HW block design

* tag 'arm-soc/for-5.2/drivers-fixes' of https://github.com/Broadcom/stblinux:
  soc: bcm: brcmstb: biuctrl: Register writes require a barrier
  soc: brcmstb: Fix error path for unsupported CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull x86 fixes from Thomas Gleixner:
 "The accumulated fixes from this and last week:

   - Fix vmalloc TLB flush and map range calculations which lead to
     stale TLBs, spurious faults and other hard to diagnose issues.

   - Use fault_in_pages_writable() for prefaulting the user stack in the
     FPU code as it's less fragile than the current solution

   - Use the PF_KTHREAD flag when checking for a kernel thread instead
     of current->mm as the latter can give the wrong answer due to
     use_mm()

   - Compute the vmemmap size correctly for KASLR and 5-Level paging.
     Otherwise this can end up with a way too small vmemmap area.

   - Make KASAN and 5-level paging work again by making sure that all
     invalid bits are masked out when computing the P4D offset. This
     worked before but got broken recently when the LDT remap area was
     moved.

   - Prevent a NULL pointer dereference in the resource control code
     which can be triggered with certain mount options when the
     requested resource is not available.

   - Enforce ordering of microcode loading vs. perf initialization on
     secondary CPUs. Otherwise perf tries to access a non-existing MSR
     as the boot CPU marked it as available.

   - Don't stop the resource control group walk early otherwise the
     control bitmaps are not updated correctly and become inconsistent.

   - Unbreak kgdb by returning 0 on success from
     kgdb_arch_set_breakpoint() instead of an error code.

   - Add more Icelake CPU model defines so depending changes can be
     queued in other trees"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
  x86/kasan: Fix boot with 5-level paging and KASAN
  x86/fpu: Don't use current->mm to check for a kthread
  x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
  x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
  x86/resctrl: Don't stop walking closids when a locksetup group is found
  x86/fpu: Update kernel's FPU state before using for the fsave header
  x86/mm/KASLR: Compute the size of the vmemmap section properly
  x86/fpu: Use fault_in_pages_writeable() for pre-faulting
  x86/CPU: Add more Icelake model numbers
  mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
  mm/vmalloc: Fix calculation of direct map addr range