- 27 Nov, 2014 40 commits
-
-
Roger Quadros authored
commit 73b3a665 upstream. For PIN_OUTPUT_PULLUP and PIN_OUTPUT_PULLDOWN we must not set the PULL_DIS bit which disables the PULLs. PULL_ENA is a 0 and using it in an OR operation is a NOP, so don't use it in the PIN_OUTPUT_PULLUP/DOWN macros. Fixes: 23d9cec0 ("pinctrl: dra: dt-bindings: Fix pull enable/disable") Signed-off-by:
Roger Quadros <rogerq@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Junjie Mao authored
commit 805dbe17 upstream. The driver is not released when ieee80211_register_hw fails in mac80211_hwsim_create_radio, leading to the access to the unregistered (and possibly freed) device in platform_driver_unregister: [ 0.447547] mac80211_hwsim: ieee80211_register_hw failed (-2) [ 0.448292] ------------[ cut here ]------------ [ 0.448854] WARNING: CPU: 0 PID: 1 at ../include/linux/kref.h:47 kobject_get+0x33/0x50() [ 0.449839] CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00001-gdd46990-dirty #2 [ 0.450813] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.451512] 00000000 00000000 78025e38 7967c6c6 78025e68 7905e09b 7988b480 00000000 [ 0.452579] 00000001 79887d62 0000002f 79170bb3 79170bb3 78397008 79ac9d74 00000001 [ 0.453614] 78025e78 7905e15d 00000009 00000000 78025e84 79170bb3 78397000 78025e8c [ 0.454632] Call Trace: [ 0.454921] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.455453] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.456067] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.456612] [<79170bb3>] ? kobject_get+0x33/0x50 [ 0.457155] [<7905e15d>] warn_slowpath_null+0x1d/0x20 [ 0.457748] [<79170bb3>] kobject_get+0x33/0x50 [ 0.458274] [<7925824f>] get_device+0xf/0x20 [ 0.458779] [<7925b5cd>] driver_detach+0x3d/0xa0 [ 0.459331] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.459927] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.460660] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.461248] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.461824] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.462507] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.463161] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.463758] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.464393] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.465001] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.465569] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.466345] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.466972] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.467546] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.468072] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.468658] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.469303] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.469829] ---[ end trace ad8ac403ff8aef5c ]--- [ 0.470509] ------------[ cut here ]------------ [ 0.471047] WARNING: CPU: 0 PID: 1 at ../kernel/locking/lockdep.c:3161 __lock_acquire.isra.22+0x7aa/0xb00() [ 0.472163] DEBUG_LOCKS_WARN_ON(id >= MAX_LOCKDEP_KEYS) [ 0.472774] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.473815] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.474492] 78025de0 78025de0 78025da0 7967c6c6 78025dd0 7905e09b 79888931 78025dfc [ 0.475515] 00000001 79888a93 00000c59 7907f33a 7907f33a 78028000 fffe9d09 00000000 [ 0.476519] 78025de8 7905e10e 00000009 78025de0 79888931 78025dfc 78025e24 7907f33a [ 0.477523] Call Trace: [ 0.477821] [<7967c6c6>] dump_stack+0x16/0x18 [ 0.478352] [<7905e09b>] warn_slowpath_common+0x6b/0x90 [ 0.478976] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.479658] [<7907f33a>] ? __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480417] [<7905e10e>] warn_slowpath_fmt+0x2e/0x30 [ 0.480479] [<7907f33a>] __lock_acquire.isra.22+0x7aa/0xb00 [ 0.480479] [<79078aa5>] ? sched_clock_cpu+0xb5/0xf0 [ 0.480479] [<7907fd06>] lock_acquire+0x56/0x70 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<79682d11>] mutex_lock_nested+0x61/0x2a0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.480479] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.480479] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.480479] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.480479] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.480479] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.480479] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.480479] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.480479] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.480479] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.480479] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.480479] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.480479] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.480479] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.480479] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.480479] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.480479] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.480479] ---[ end trace ad8ac403ff8aef5d ]--- [ 0.495478] BUG: unable to handle kernel paging request at 00200200 [ 0.496257] IP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 [ 0.496923] *pde = 00000000 [ 0.497290] Oops: 0002 [#1] [ 0.497653] CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.17.0-00001-gdd46990-dirty #2 [ 0.498659] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.499321] task: 78028000 ti: 78024000 task.ti: 78024000 [ 0.499955] EIP: 0060:[<79682de5>] EFLAGS: 00010097 CPU: 0 [ 0.500620] EIP is at mutex_lock_nested+0x135/0x2a0 [ 0.501145] EAX: 00200200 EBX: 78397434 ECX: 78397460 EDX: 78025e70 [ 0.501816] ESI: 00000246 EDI: 78028000 EBP: 78025e8c ESP: 78025e54 [ 0.502497] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.503076] CR0: 8005003b CR2: 00200200 CR3: 01b9d000 CR4: 00000690 [ 0.503773] Stack: [ 0.503998] 00000000 00000001 00000000 7925b5e8 78397460 7925b5e8 78397474 78397460 [ 0.504944] 00200200 11111111 78025e70 78397000 79ac9d74 00000001 78025ea0 7925b5e8 [ 0.505451] 79ac9d74 fffffffe 00000001 78025ebc 7925a3ff 7a251398 78025ec8 7925bf80 [ 0.505451] Call Trace: [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] ? driver_detach+0x58/0xa0 [ 0.505451] [<7925b5e8>] driver_detach+0x58/0xa0 [ 0.505451] [<7925a3ff>] bus_remove_driver+0x8f/0xb0 [ 0.505451] [<7925bf80>] ? class_unregister+0x40/0x80 [ 0.505451] [<7925bad7>] driver_unregister+0x47/0x50 [ 0.505451] [<7925c033>] ? class_destroy+0x13/0x20 [ 0.505451] [<7925d07b>] platform_driver_unregister+0xb/0x10 [ 0.505451] [<79b51ba0>] init_mac80211_hwsim+0x3e8/0x3f9 [ 0.505451] [<79b30c58>] do_one_initcall+0x106/0x1a9 [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79b517b8>] ? if_spi_init_module+0xac/0xac [ 0.505451] [<79071935>] ? parse_args+0x2f5/0x480 [ 0.505451] [<7906b41e>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 0.505451] [<79b30dd9>] kernel_init_freeable+0xde/0x17d [ 0.505451] [<79b304d6>] ? do_early_param+0x7a/0x7a [ 0.505451] [<79677b1b>] kernel_init+0xb/0xe0 [ 0.505451] [<79075f42>] ? schedule_tail+0x12/0x40 [ 0.505451] [<79686580>] ret_from_kernel_thread+0x20/0x30 [ 0.505451] [<79677b10>] ? rest_init+0xc0/0xc0 [ 0.505451] Code: 89 d8 e8 cf 9b 9f ff 8b 4f 04 8d 55 e4 89 d8 e8 72 9d 9f ff 8d 43 2c 89 c1 89 45 d8 8b 43 30 8d 55 e4 89 53 30 89 4d e4 89 45 e8 <89> 10 8b 55 dc 8b 45 e0 89 7d ec e8 db af 9f ff eb 11 90 31 c0 [ 0.505451] EIP: [<79682de5>] mutex_lock_nested+0x135/0x2a0 SS:ESP 0068:78025e54 [ 0.505451] CR2: 0000000000200200 [ 0.505451] ---[ end trace ad8ac403ff8aef5e ]--- [ 0.505451] Kernel panic - not syncing: Fatal exception Fixes: 9ea92774 ("mac80211_hwsim: Register and bind to driver") Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Junjie Mao <eternal.n08@gmail.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Richard Guy Briggs authored
commit 9ef91514 upstream. When an AUDIT_GET_FEATURE message is sent from userspace to the kernel, it should reply with a message tagged as an AUDIT_GET_FEATURE type with a struct audit_feature. The current reply is a message tagged as an AUDIT_GET type with a struct audit_feature. This appears to have been a cut-and-paste-eo in commit b0fed402. Reported-by:
Steve Grubb <sgrubb@redhat.com> Signed-off-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Cristian Stoica authored
commit 307fd543 upstream. Replace equivalent (and partially incorrect) scatter-gather functions with ones from crypto-API. The replacement is motivated by page-faults in sg_copy_part triggered by successive calls to crypto_hash_update. The following fault appears after calling crypto_ahash_update twice, first with 13 and then with 285 bytes: Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xf9bf9a8c Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: tcrypt(+) caamhash caam_jr caam tls CPU: 6 PID: 1497 Comm: cryptomgr_test Not tainted 3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2 #75 task: e9308530 ti: e700e000 task.ti: e700e000 NIP: f9bf9a8c LR: f9bfcf28 CTR: c0019ea0 REGS: e700fb80 TRAP: 0300 Not tainted (3.12.19-rt30-QorIQ-SDK-V1.6+g9fda9f2) MSR: 00029002 <CE,EE,ME> CR: 44f92024 XER: 20000000 DEAR: 00000008, ESR: 00000000 GPR00: f9bfcf28 e700fc30 e9308530 e70b1e55 00000000 ffffffdd e70b1e54 0bebf888 GPR08: 902c7ef5 c0e771e2 00000002 00000888 c0019ea0 00000000 00000000 c07a4154 GPR16: c08d0000 e91a8f9c 00000001 e98fb400 00000100 e9c83028 e70b1e08 e70b1d48 GPR24: e992ce10 e70b1dc8 f9bfe4f4 e70b1e55 ffffffdd e70b1ce0 00000000 00000000 NIP [f9bf9a8c] sg_copy+0x1c/0x100 [caamhash] LR [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] Call Trace: [e700fc30] [f9bf9c50] sg_copy_part+0xe0/0x160 [caamhash] (unreliable) [e700fc50] [f9bfcf28] ahash_update_no_ctx+0x628/0x660 [caamhash] [e700fcb0] [f954e19c] crypto_tls_genicv+0x13c/0x300 [tls] [e700fd10] [f954e65c] crypto_tls_encrypt+0x5c/0x260 [tls] [e700fd40] [c02250ec] __test_aead.constprop.9+0x2bc/0xb70 [e700fe40] [c02259f0] alg_test_aead+0x50/0xc0 [e700fe60] [c02241e4] alg_test+0x114/0x2e0 [e700fee0] [c022276c] cryptomgr_test+0x4c/0x60 [e700fef0] [c004f658] kthread+0x98/0xa0 [e700ff40] [c000fd04] ret_from_kernel_thread+0x5c/0x64 Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Pawel Moll authored
commit b3f20785 upstream. When running a 32-bit userspace on a 64-bit kernel (eg. i386 application on x86_64 kernel or 32-bit arm userspace on arm64 kernel) some of the perf ioctls must be treated with special care, as they have a pointer size encoded in the command. For example, PERF_EVENT_IOC_ID in 32-bit world will be encoded as 0x80042407, but 64-bit kernel will expect 0x80082407. In result the ioctl will fail returning -ENOTTY. This patch solves the problem by adding code fixing up the size as compat_ioctl file operation. Reported-by:
Drew Richardson <drew.richardson@arm.com> Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1402671812-9078-1-git-send-email-pawel.moll@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Derek Browne authored
commit 43e968ce upstream. This patch is to enable SDIO host controller for Intel Quark X1000. Signed-off-by:
Derek Browne <Derek.Browne@intel.com> Signed-off-by:
Alvin (Weike) Chen <alvin.chen@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Frank Schaefer authored
commit 627530c3 upstream. When a new video frame is started, the driver takes the next video buffer from the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf for further processing. On streaming stop we currently only give back the pending buffers from the list but not the ones which are currently processed. This causes the following warning from the vb2 core since kernel 3.15: ... ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]() [...] Call Trace: [<c0769c46>] dump_stack+0x48/0x69 [<c0245b69>] warn_slowpath_common+0x79/0x90 [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<c0245bfd>] warn_slowpath_null+0x1d/0x20 [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core] [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core] [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core] [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core] [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev] [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<c039d0e7>] ? fsnotify+0x1e7/0x2b0 [<f8e49012>] video_ioctl2+0x12/0x20 [videodev] [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev] [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev] [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev] [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0 [<c0368eec>] ? vfs_write+0x13c/0x1c0 [<c0369a8f>] ? vfs_writev+0x2f/0x50 [<c0379028>] SyS_ioctl+0x58/0x80 [<c076fff3>] sysenter_do_call+0x12/0x12 ---[ end trace 5545f934409f13f4 ]--- ... Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled this long standing issue and who has investigated it further. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Stephan Mueller authored
commit 725c7f61 upstream. The Yoga 3 does not contain any physical rfkill switch. Therefore disable the rfkill switch identically to the Yoga 2 approach. Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Nadav Amit authored
commit a2b9e6c1 upstream. Commit fc3a9157 ("KVM: X86: Don't report L2 emulation failures to user-space") disabled the reporting of L2 (nested guest) emulation failures to userspace due to race-condition between a vmexit and the instruction emulator. The same rational applies also to userspace applications that are permitted by the guest OS to access MMIO area or perform PIO. This patch extends the current behavior - of injecting a #UD instead of reporting it to userspace - also for guest userspace code. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 83d04c39 upstream. Fixes kfree of the sadb buffer when it's NULL. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Andreas Larsson authored
commit 1a17fdc4 upstream. Atomicity between xchg and cmpxchg cannot be guaranteed when xchg is implemented with a swap and cmpxchg is implemented with locks. Without this, e.g. mcs_spin_lock and mcs_spin_unlock are broken. Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David S. Miller authored
commit ab5c7809 upstream. Otherwise rcu_irq_{enter,exit}() do not happen and we get dumps like: ==================== [ 188.275021] =============================== [ 188.309351] [ INFO: suspicious RCU usage. ] [ 188.343737] 3.18.0-rc3-00068-g20f3963d-dirty #54 Not tainted [ 188.394786] ------------------------------- [ 188.429170] include/linux/rcupdate.h:883 rcu_read_lock() used illegally while idle! [ 188.505235] other info that might help us debug this: [ 188.554230] RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 [ 188.637587] RCU used illegally from extended quiescent state! [ 188.690684] 3 locks held by swapper/7/0: [ 188.721932] #0: (&x->wait#11){......}, at: [<0000000000495de8>] complete+0x8/0x60 [ 188.797994] #1: (&p->pi_lock){-.-.-.}, at: [<000000000048510c>] try_to_wake_up+0xc/0x400 [ 188.881343] #2: (rcu_read_lock){......}, at: [<000000000048a910>] select_task_rq_fair+0x90/0xb40 [ 188.973043]stack backtrace: [ 188.993879] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.18.0-rc3-00068-g20f3963d-dirty #54 [ 189.076187] Call Trace: [ 189.089719] [0000000000499360] lockdep_rcu_suspicious+0xe0/0x100 [ 189.147035] [000000000048a99c] select_task_rq_fair+0x11c/0xb40 [ 189.202253] [00000000004852d8] try_to_wake_up+0x1d8/0x400 [ 189.252258] [000000000048554c] default_wake_function+0xc/0x20 [ 189.306435] [0000000000495554] __wake_up_common+0x34/0x80 [ 189.356448] [00000000004955b4] __wake_up_locked+0x14/0x40 [ 189.406456] [0000000000495e08] complete+0x28/0x60 [ 189.448142] [0000000000636e28] blk_end_sync_rq+0x8/0x20 [ 189.496057] [0000000000639898] __blk_mq_end_request+0x18/0x60 [ 189.550249] [00000000006ee014] scsi_end_request+0x94/0x180 [ 189.601286] [00000000006ee334] scsi_io_completion+0x1d4/0x600 [ 189.655463] [00000000006e51c4] scsi_finish_command+0xc4/0xe0 [ 189.708598] [00000000006ed958] scsi_softirq_done+0x118/0x140 [ 189.761735] [00000000006398ec] __blk_mq_complete_request_remote+0xc/0x20 [ 189.827383] [00000000004c75d0] generic_smp_call_function_single_interrupt+0x150/0x1c0 [ 189.906581] [000000000043e514] smp_call_function_single_client+0x14/0x40 ==================== Based almost entirely upon a patch by Paul E. McKenney. Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
-
David S. Miller authored
commit 7da89a2a upstream. Meelis Roos reports crashes during bootup on a V480 that look like this: ==================== [ 61.300577] PCI: Scanning PBM /pci@9,600000 [ 61.304867] schizo f009b070: PCI host bridge to bus 0003:00 [ 61.310385] pci_bus 0003:00: root bus resource [io 0x7ffe9000000-0x7ffe9ffffff] (bus address [0x0000-0xffffff]) [ 61.320515] pci_bus 0003:00: root bus resource [mem 0x7fb00000000-0x7fbffffffff] (bus address [0x00000000-0xffffffff]) [ 61.331173] pci_bus 0003:00: root bus resource [bus 00] [ 61.385344] Unable to handle kernel NULL pointer dereference [ 61.390970] tsk->{mm,active_mm}->context = 0000000000000000 [ 61.396515] tsk->{mm,active_mm}->pgd = fff000b000002000 [ 61.401716] \|/ ____ \|/ [ 61.401716] "@'/ .. \`@" [ 61.401716] /_| \__/ |_\ [ 61.401716] \__U_/ [ 61.416362] swapper/0(0): Oops [#1] [ 61.419837] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc1-00422-g2cc91884-dirty #24 [ 61.427975] task: fff000b0fd8e9c40 ti: fff000b0fd928000 task.ti: fff000b0fd928000 [ 61.435426] TSTATE: 0000004480e01602 TPC: 00000000004455e4 TNPC: 00000000004455e8 Y: 00000000 Not tainted [ 61.445230] TPC: <schizo_pcierr_intr+0x104/0x560> [ 61.449897] g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000a10f78 g3: 000000000000000a [ 61.458563] g4: fff000b0fd8e9c40 g5: fff000b0fdd82000 g6: fff000b0fd928000 g7: 000000000000000a [ 61.467229] o0: 000000000000003d o1: 0000000000000000 o2: 0000000000000006 o3: fff000b0ffa5fc7e [ 61.475894] o4: 0000000000060000 o5: c000000000000000 sp: fff000b0ffa5f3c1 ret_pc: 00000000004455cc [ 61.484909] RPC: <schizo_pcierr_intr+0xec/0x560> [ 61.489500] l0: fff000b0fd8e9c40 l1: 0000000000a20800 l2: 0000000000000000 l3: 000000000119a430 [ 61.498164] l4: 0000000001742400 l5: 00000000011cfbe0 l6: 00000000011319c0 l7: fff000b0fd8ea348 [ 61.506830] i0: 0000000000000000 i1: fff000b0fdb34000 i2: 0000000320000000 i3: 0000000000000000 [ 61.515497] i4: 00060002010b003f i5: 0000040004e02000 i6: fff000b0ffa5f481 i7: 00000000004a9920 [ 61.524175] I7: <handle_irq_event_percpu+0x40/0x140> [ 61.529099] Call Trace: [ 61.531531] [00000000004a9920] handle_irq_event_percpu+0x40/0x140 [ 61.537681] [00000000004a9a58] handle_irq_event+0x38/0x80 [ 61.543145] [00000000004ac77c] handle_fasteoi_irq+0xbc/0x200 [ 61.548860] [00000000004a9084] generic_handle_irq+0x24/0x40 [ 61.554500] [000000000042be0c] handler_irq+0xac/0x100 ==================== The problem is that pbm->pci_bus->self is NULL. This code is trying to go through the standard PCI config space interfaces to read the PCI controller's PCI_STATUS register. This doesn't work, because we more often than not do not enumerate the PCI controller as a bonafide PCI device during the OF device node scan. Therefore bus->self remains NULL. Existing common code for PSYCHO and PSYCHO-like PCI controllers handles this properly, by doing the config space access directly. Do the same here, pbm->pci_ops->{read,write}(). Reported-by:
-
Dwight Engen authored
commit 85b0c6e6 upstream. The VD_OP_GET_VTOC operation will succeed only if the vdisk backend has a VTOC label, otherwise it will fail. In particular, it will return error 48 (ENOTSUP) if the disk has an EFI label. VTOC disk labels are already handled by directly reading the disk in block/partitions/sun.c (enabled by CONFIG_SUN_PARTITION which defaults to y on SPARC). Since port->label is unused in the driver, remove the call and the field. Signed-off-by:
Dwight Engen <dwight.engen@oracle.com> Signed-off-by:
-
Dwight Engen authored
commit d0aedcd4 upstream. vio_dring_avail() will allow use of every dring entry, but when the last entry is allocated then dr->prod == dr->cons which is indistinguishable from the ring empty condition. This causes the next allocation to reuse an entry. When this happens in sunvdc, the server side vds driver begins nack'ing the messages and ends up resetting the ldc channel. This problem does not effect sunvnet since it checks for < 2. The fix here is to just never allocate the very last dring slot so that full and empty are not the same condition. The request start path was changed to check for the ring being full a bit earlier, and to stop the blk_queue if there is no space left. The blk_queue will be restarted once the ring is only half full again. The number of ring entries was increased to 512 which matches the sunvnet and Solaris vdc drivers, and greatly reduces the frequency of hitting the ring full condition and the associated blk_queue stop/starting. The checks in sunvent were adjusted to account for vio_dring_avail() returning 1 less. Orabug: 19441666 OraBZ: 14983 Signed-off-by:
-
Dwight Engen authored
commit 5eed69ff upstream. ldc_map_sg() could fail its check that the number of pages referred to by the sg scatterlist was <= the number of cookies. This fixes the issue by doing a similar thing to the xen-blkfront driver, ensuring that the scatterlist will only ever contain a segment count <= port->ring_cookies, and each segment will be page aligned, and <= page size. This ensures that the scatterlist is always mappable. Orabug: 19347817 OraBZ: 15945 Signed-off-by:
-
Allen Pais authored
commit de5b73f0 upstream. The LDom diskserver doesn't return reliable geometry data. In addition, the types for all fields in the vio_disk_geom are u16, which were being truncated in the cast into the u8's of the Linux struct hd_geometry. Modify vdc_getgeo() to compute the geometry from the disk's capacity in a manner consistent with xen-blkfront::blkif_getgeo(). Signed-off-by:
-
Allen Pais authored
commit 9bce2182 upstream. Interpret the media type from v1.1 protocol to support CDROM/DVD. For v1.0 protocol, a disk's size continues to be calculated from the geometry returned by the vdisk server. The geometry returned by the server can be less than the actual number of sectors available in the backing image/device due to the rounding in the division used to compute the geometry in the vdisk server. In v1.1 protocol a disk's actual size in sectors is returned during the handshake. Use this size when v1.1 protocol is negotiated. Since this size will always be larger than the former geometry computed size, disks created under v1.0 will be forwards compatible to v1.1, but not vice versa. Signed-off-by:
-
Enric Balletbo i Serra authored
commit ccf899a2 upstream. With commit be9dad1f ("net: phy: suspend phydev when going to HALTED"), the PHY device will be put in a low-power mode using BMCR_PDOWN if the the interface is set down. The smsc911x driver does a software_reset opening the device driver (ndo_open). In such case, the PHY must be powered-up before access to any register and before calling the software_reset function. Otherwise, as the PHY is powered down the software reset fails and the interface can not be enabled again. This patch fixes this scenario that is easy to reproduce setting down the network interface and setting up again. $ ifconfig eth0 down $ ifconfig eth0 up ifconfig: SIOCSIFFLAGS: Input/output error Signed-off-by:
Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by:
-
Hiroaki SHIMODA authored
commit 6251edd9 upstream. Even if netlink_kernel_cfg::unbind is implemented the unbind() method is not called, because cfg->unbind is omitted in __netlink_kernel_create(). And fix wrong argument of test_bit() and off by one problem. At this point, no unbind() method is implemented, so there is no real issue. Fixes: 4f520900 ("netlink: have netlink per-protocol bind function return an error code.") Signed-off-by:
Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Cc: Richard Guy Briggs <rgb@redhat.com> Acked-by:
-
Eric Dumazet authored
commit 5337b5b7 upstream. Use IS_ENABLED(CONFIG_IPV6), to enable this code if IPv6 is a module. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: c8e6ad08 ("ipv6: honor IPV6_PKTINFO with v4 mapped addresses on sendmsg") Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
commit 4184b2a7 upstream. A very minimal and simple user space application allocating an SCTP socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing the socket again will leak the memory containing the authentication key from user space: unreferenced object 0xffff8800837047c0 (size 16): comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s) hex dump (first 16 bytes): 01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811c88d8>] __kmalloc+0xe8/0x270 [<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp] [<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp] [<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp] [<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20 [<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0 [<ffffffff816e58a9>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff This is bad because of two things, we can bring down a machine from user space when auth_enable=1, but also we would leave security sensitive keying material in memory without clearing it after use. The issue is that sctp_auth_create_key() already sets the refcount to 1, but after allocation sctp_auth_set_key() does an additional refcount on it, and thus leaving it around when we free the socket. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Borkmann authored
commit e40607cb upstream. An SCTP server doing ASCONF will panic on malformed INIT ping-of-death in the form of: ------------ INIT[PARAM: SET_PRIMARY_IP] ------------> While the INIT chunk parameter verification dissects through many things in order to detect malformed input, it misses to actually check parameters inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary IP address' parameter in ASCONF, which has as a subparameter an address parameter. So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0 and thus sctp_get_af_specific() returns NULL, too, which we then happily dereference unconditionally through af->from_addr_param(). The trace for the log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] PGD 0 Oops: 0000 [#1] SMP [...] Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs RIP: 0010:[<ffffffffa01e9c62>] [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] [...] Call Trace: <IRQ> [<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp] [<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp] [<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [...] A minimal way to address this is to check for NULL as we do on all other such occasions where we know sctp_get_af_specific() could possibly return with NULL. Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by:
-
Marcelo Leitner authored
commit 19ca9fc1 upstream. Currently, we only match against local port number in order to reuse socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will follow. The following steps reproduce it: # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \ srcport 5000 6000 dev eth0 # ip link add vxlan7 type vxlan id 43 group ff0e::110 \ srcport 5000 6000 dev eth0 # ip link set vxlan6 up # ip link set vxlan7 up <panic> [ 4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 ... [ 4.188076] Call Trace: [ 4.188085] [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630 [ 4.188098] [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan] [ 4.188113] [<ffffffff810a3430>] process_one_work+0x220/0x710 [ 4.188125] [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710 [ 4.188138] [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0 [ 4.188149] [<ffffffff810a3920>] ? process_one_work+0x710/0x710 So address family must also match in order to reuse a socket. Reported-by:
Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
Karl Beldan authored
commit 2c2a9cbd upstream. ATM, txq_reclaim will dequeue and free an skb for each tx desc released by the hw that has TX_LAST_DESC set. However, in case of TSO, each hw desc embedding the last part of a segment has TX_LAST_DESC set, losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance, which causes data corruption. Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and warn when trying to dequeue from an empty txq (which can be symptomatic of releasing skbs prematurely). Fixes: 3ae8f4e0 ('net: mv643xx_eth: Implement software TSO') Reported-by:
Slawomir Gajzner <slawomir.gajzner@gmail.com> Reported-by:
Julien D'Ascenzio <jdascenzio@yahoo.fr> Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Steffen Klassert authored
commit f03eb128 upstream. Otherwise it gets overwritten by register_netdev(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
commit ebe084aa upstream. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
Steffen Klassert authored
commit 16a0231b upstream. vti6_dev_init() sets the dev->iflink via a call to vti6_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for vti6 tunnels. Fix this by using vti6_dev_init() as the ndo_init function. Then vti6_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
Steffen Klassert authored
commit 6c6151da upstream. ip6_tnl_dev_init() sets the dev->iflink via a call to ip6_tnl_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the ndo_init function. Then ip6_tnl_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
NeilBrown authored
commit 45eaf45d upstream. md_check_recovery will skip any recovery and also clear MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set. So when we clear _FROZEN, we must set _NEEDED and ensure that md_check_recovery gets run. Otherwise we could miss out on something that is needed. In particular, this can make it impossible to remove a failed device from an array is the 'recovery-needed' processing didn't happen. Suitable for stable kernels since 3.13. Reported-and-tested-by:
Joe Lawrence <joe.lawrence@stratus.com> Fixes: 30b8feb7Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Stefan Richter authored
commit eaca2d8e upstream. Found by the UC-KLEE tool: A user could supply less input to firewire-cdev ioctls than write- or write/read-type ioctl handlers expect. The handlers used data from uninitialized kernel stack then. This could partially leak back to the user if the kernel subsequently generated fw_cdev_event_'s (to be read from the firewire-cdev fd) which notably would contain the _u64 closure field which many of the ioctl argument structures contain. The fact that the handlers would act on random garbage input is a lesser issue since all handlers must check their input anyway. The fix simply always null-initializes the entire ioctl argument buffer regardless of the actual length of expected user input. That is, a runtime overhead of memset(..., 40) is added to each firewirew-cdev ioctl() call. [Comment from Clemens Ladisch: This part of the stack is most likely to be already in the cache.] Remarks: - There was never any leak from kernel stack to the ioctl output buffer itself. IOW, it was not possible to read kernel stack by a read-type or write/read-type ioctl alone; the leak could at most happen in combination with read()ing subsequent event data. - The actual expected minimum user input of each ioctl from include/uapi/linux/firewire-cdev.h is, in bytes: [0x00] = 32, [0x05] = 4, [0x0a] = 16, [0x0f] = 20, [0x14] = 16, [0x01] = 36, [0x06] = 20, [0x0b] = 4, [0x10] = 20, [0x15] = 20, [0x02] = 20, [0x07] = 4, [0x0c] = 0, [0x11] = 0, [0x16] = 8, [0x03] = 4, [0x08] = 24, [0x0d] = 20, [0x12] = 36, [0x17] = 12, [0x04] = 20, [0x09] = 24, [0x0e] = 4, [0x13] = 40, [0x18] = 4. Reported-by:
David Ramos <daramos@stanford.edu> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Pali Rohár authored
commit a7ef82ae upstream. Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Tested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tang Chen authored
commit 0bd85420 upstream. When memory is hot-added, all the memory is in offline state. So clear all zones' present_pages because they will be updated in online_pages() and offline_pages(). Otherwise, /proc/zoneinfo will corrupt: When the memory of node2 is offline: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 8388608 managed 0 When we online memory on node2: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 16777216 managed 8388608 Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tang Chen authored
commit f784a3f1 upstream. In free_area_init_core(), zone->managed_pages is set to an approximate value for lowmem, and will be adjusted when the bootmem allocator frees pages into the buddy system. But free_area_init_core() is also called by hotadd_new_pgdat() when hot-adding memory. As a result, zone->managed_pages of the newly added node's pgdat is set to an approximate value in the very beginning. Even if the memory on that node has node been onlined, /sys/device/system/node/nodeXXX/meminfo has wrong value: hot-add node2 (memory not onlined) cat /sys/device/system/node/node2/meminfo Node 2 MemTotal: 33554432 kB Node 2 MemFree: 0 kB Node 2 MemUsed: 33554432 kB Node 2 Active: 0 kB This patch fixes this problem by reset node managed pages to 0 after hot-adding a new node. 1. Move reset_managed_pages_done from reset_node_managed_pages() to reset_all_zones_managed_pages() 2. Make reset_node_managed_pages() non-static 3. Call reset_node_managed_pages() in hotadd_new_pgdat() after pgdat is initialized Signed-off-by:
-
Weijie Yang authored
commit c4065152 upstream. zram could kunmap_atomic() a NULL pointer in a rare situation: a zram page becomes a full-zeroed page after a partial write io. The current code doesn't handle this case and performs kunmap_atomic() on a NULL pointer, which panics the kernel. This patch fixes this issue. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang.kh@gmail.com> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Nathan Lynch authored
commit 08b964ff upstream. The kuser helpers page is not set up on non-MMU systems, so it does not make sense to allow CONFIG_KUSER_HELPERS to be enabled when CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in set_tls (used in execve and the arm_syscall trap handler): Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 task: 8b838000 ti: 8b82a000 task.ti: 8b82a000 PC is at flush_thread+0x32/0x40 LR is at flush_thread+0x21/0x40 pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b sp : 8b82be20 ip : 00000000 fp : 8b83c000 r10: 00000001 r9 : 88018c84 r8 : 8bb85000 r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000 r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 [<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc) [<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c) As best I can tell this issue existed for the set_tls ARM syscall before commit fbfb872f "ARM: 8148/1: flush TLS and thumbee register state during exec" consolidated the TLS manipulation code into the set_tls helper function, but now that we're using it to flush register state during execve, !MMU users encounter the oops at the first exec. Prevent CONFIG_MMU=n configurations from enabling CONFIG_KUSER_HELPERS. Fixes: fbfb872f (ARM: 8148/1: flush TLS and thumbee register state during exec) Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Reported-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit 238962ac upstream. To speed up decompression, the decompressor sets up a flat, cacheable mapping of memory. However, when there is insufficient space to hold the page tables for this mapping, we don't bother to enable the caches and subsequently skip all the cache maintenance hooks. Skipping the cache maintenance before jumping to the relocated code allows the processor to predict the branch and populate the I-cache with stale data before the relocation loop has completed (since a bootloader may have SCTLR.I set, which permits normal, cacheable instruction fetches regardless of SCTLR.M). This patch moves the cache maintenance check into the maintenance routines themselves, allowing the v6/v7 versions to invalidate the I-cache regardless of the MMU state. Reported-by:
Marc Carino <marc.ceeeee@gmail.com> Tested-by:
Julien Grall <julien.grall@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Ilya Dryomov authored
commit aaef3170 upstream. Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth tickets will have their buffers vmalloc'ed, which leads to the following crash in crypto: [ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0 [ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.686032] PGD 0 [ 28.688088] Oops: 0000 [#1] PREEMPT SMP [ 28.688088] Modules linked in: [ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305 [ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.688088] Workqueue: ceph-msgr con_work [ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000 [ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286 [ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0 [ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750 [ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880 [ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010 [ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000 [ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0 [ 28.688088] Stack: [ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32 [ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020 [ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010 [ 28.688088] Call Trace: [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220 [ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180 [ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30 [ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0 [ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0 [ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60 [ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0 [ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360 [ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0 [ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80 [ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0 [ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80 [ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0 [ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0 [ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10 This is because we set up crypto scatterlists as if all buffers were kmalloc'ed. Fix it. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Paul Mackerras authored
commit ad0eab92 upstream. The branches of the if (i->type & ITER_BVEC) statement in iov_iter_single_seg_count() are the wrong way around; if ITER_BVEC is clear then we use i->bvec, when we should be using i->iov. This fixes it. In my case, the symptom that this caused was that a KVM guest doing filesystem operations on a virtual disk would result in one of qemu's threads on the host going into an infinite loop in generic_perform_write(). The loop would hit the copied == 0 case and call iov_iter_single_seg_count() to reduce the number of bytes to try to process, but because of the error, iov_iter_single_seg_count() would just return i->count and the loop made no progress and continued forever. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
William Cohen authored
commit 899d5933 upstream. When experimenting with patches to provide kprobes support for aarch64 smp machines would hang when inserting breakpoints into kernel code. The hangs were caused by a race condition in the code called by aarch64_insn_patch_text_sync(). The first processor in the aarch64_insn_patch_text_cb() function would patch the code while other processors were still entering the function and incrementing the cpu_count field. This resulted in some processors never observing the exit condition and exiting the function. Thus, processors in the system hung. The first processor to enter the patching function performs the patching and signals that the patching is complete with an increment of the cpu_count field. When all the processors have incremented the cpu_count field the cpu_count will be num_cpus_online()+1 and they will return to normal execution. Fixes: ae164807 arm64: introduce interfaces to hotpatch kernel and module code Signed-off-by:
William Cohen <wcohen@redhat.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
