- 16 Jan, 2019 40 commits
-
-
He Zhe authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 277fcdb2 upstream. log_buf_len_setup does not check input argument before passing it to simple_strtoull. The argument would be a NULL pointer if "log_buf_len", without its value, is set in command line and thus causes the following panic. PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1 [ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70 ... [ 0.000000] Call Trace: [ 0.000000] simple_strtoull+0x29/0x70 [ 0.000000] memparse+0x26/0x90 [ 0.000000] log_buf_len_setup+0x17/0x22 [ 0.000000] do_early_param+0x57/0x8e [ 0.000000] parse_args+0x208/0x320 [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_options+0x29/0x2d [ 0.000000] ? rdinit_setup+0x30/0x30 [ 0.000000] parse_early_param+0x36/0x4d [ 0.000000] setup_arch+0x336/0x99e [ 0.000000] start_kernel+0x6f/0x4ee [ 0.000000] x86_64_start_reservations+0x24/0x26 [ 0.000000] x86_64_start_kernel+0x6f/0x72 [ 0.000000] secondary_startup_64+0xa4/0xb0 This patch adds a check to prevent the panic. Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com Cc: stable@vger.kernel.org Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
He Zhe <zhe.he@windriver.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 926674de upstream. Some servers (e.g. Azure) do not include a spnego blob in the SMB3 negotiate protocol response, so on kerberos mounts ("sec=krb5") we can fail, as we expected the server to list its supported auth types (OIDs in the spnego blob in the negprot response). Change this so that on krb5 mounts we default to trying krb5 if the server doesn't list its supported protocol mechanisms. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 1e77a8c2 upstream. If backupuid mount option is sent, we can incorrectly retry (on access denied on query info) with a cifs (FindFirst) operation on an smb3 mount which causes the server to force the session close. We set backup intent on open so no need for this fallback. See kernel bugzilla 201435 Signed-off-by:
-
Steve French authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 2c887635 upstream. Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats except the session and share reconnect counts. Fix it to reset those as well. CC: Stable <stable@vger.kernel.org> Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Andreas Kemnade authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit a0077346 upstream. The bus master was not removed after unloading the module or unbinding the driver. That lead to oopses like this [ 127.842987] Unable to handle kernel paging request at virtual address bf01d04c [ 127.850646] pgd = 70e3cd9a [ 127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000 [ 127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq] [ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12 [ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 127.890441] PC is at 0xbf01d04c [ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc [ 127.898956] pc : [<bf01d04c>] lr : [<c05f9580>] psr: a0070013 [ 127.905609] sp : cf885f48 ip : bf01d04c fp : ddf1e11c [ 127.911132] r10: cf8fe040 r9 : c05f8d00 r8 : cf8fe040 [ 127.916656] r7 : 000000f0 r6 : cf8fe02c r5 : cf8fe000 r4 : cf8fe01c [ 127.923553] r3 : c05f8d00 r2 : 000000f0 r1 : cf8fe000 r0 : dde1ef10 [ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 127.938018] Control: 10c5387d Table: 8f8f0019 DAC: 00000051 [ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f) [ 127.951171] Stack: (0xcf885f48 to 0xcf886000) [ 127.955810] 5f40: cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00 [ 127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000 [ 127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000 [ 127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118) [ 128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148) [ 128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8) [ 128.037017] 5fa0: 00000000 00000000 00000000 00000000 [ 128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 128.061340] Code: bad PC value [ 128.064697] ---[ end trace af066e33c0e14119 ]--- Cc: <stable@vger.kernel.org> Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Signed-off-by:
-
Eugen Hristev authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit aea835f2 upstream. When channels are registered, the hardware channel number is not the actual iio channel number. This is because the driver is probed with a certain number of accessible channels. Some pins are routed and some not, depending on the description of the board in the DT. Because of that, channels 0,1,2,3 can correspond to hardware channels 2,3,4,5 for example. In the buffered triggered case, we need to do the translation accordingly. Fixed the channel number to stop reading the wrong channel. Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Eugen Hristev authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit bc1b4532 upstream. When doing simple conversions, the driver did not acknowledge the DRDY irq. If this irq status is not acked, it will be left pending, and as soon as a trigger is enabled, the irq handler will be called, it doesn't know why this status has occurred because no channel is pending, and then it will go int a irq loop and board will hang. To avoid this situation, read the LCDR after a raw conversion is done. Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 6a32c246 upstream. Building any configuration with 'make W=1' produces a warning: kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes] When also passing -Werror, this prevents us from building any other files. Nobody ever calls the function, but we can't make it 'static' either since we want the compiler output. Calling it 'main' instead however avoids the warning, because gcc does not insist on having a declaration for main. Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mike Kravetz authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 22146c3c upstream. Some test systems were experiencing negative huge page reserve counts and incorrect file block counts. This was traced to /proc/sys/vm/drop_caches removing clean pages from hugetlbfs file pagecaches. When non-hugetlbfs explicit code removes the pages, the appropriate accounting is not performed. This can be recreated as follows: fallocate -l 2M /dev/hugepages/foo echo 1 > /proc/sys/vm/drop_caches fallocate -l 2M /dev/hugepages/foo grep -i huge /proc/meminfo AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 2048 HugePages_Free: 2047 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 4194304 kB ls -lsh /dev/hugepages/foo 4.0M -rw-r--r--. 1 root root 2.0M Oct 17 20:05 /dev/hugepages/foo To address this issue, dirty pages as they are added to pagecache. This can easily be reproduced with fallocate as shown above. Read faulted pages will eventually end up being marked dirty. But there is a window where they are clean and could be impacted by code such as drop_caches. So, just dirty them all as they are added to the pagecache. Link: http://lkml.kernel.org/r/b5be45b8-5afe-56cd-9482-28384699a049@oracle.com Fixes: 6bda666a ("hugepages: fold find_or_alloc_pages into huge_no_page()") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Mihcla Hocko <mhocko@suse.com> Reviewed-by:
Khalid Aziz <khalid.aziz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 1e4c8daf upstream. The 12 character temporary buffer is not necessarily long enough to hold a 'long' value. Increase it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Ondrej Mosnacek authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit fbe1a850 upstream. When the LRW block counter overflows, the current implementation returns 128 as the index to the precomputed multiplication table, which has 128 entries. This patch fixes it to return the correct value (127). Fixes: 64470f1b ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode") Cc: <stable@vger.kernel.org> # 2.6.20+ Reported-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 0ab93e9c upstream. The genweq_add_file and genwqe_del_file by caching current without using reference counting embed the assumption that a file descriptor will never be passed from one process to another. It even embeds the assumption that the the thread that opened the file will be in existence when the process terminates. Neither of which are guaranteed to be true. Therefore replace caching the task_struct of the opener with pid of the openers thread group id. All the knowledge of the opener is used for is as the target of SIGKILL and a SIGKILL will kill the entire process group. Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary signal argument, update it's ownly caller, and use kill_pid instead of force_sig. The work force_sig does in changing signal handling state is not relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess will be killed just with less work, and less confusion. The work done by force_sig is really only needed for handling syncrhonous exceptions. It will still be possible to cause genwqe_device_remove to wait 8 seconds by passing a file descriptor to another process but the possible user after free is fixed. Fixes: eaf4722d ("GenWQE Character device and DDCB queue") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Frank Haverkamp <haver@linux.vnet.ibm.com> Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com> Cc: Michael Jung <mijung@gmx.net> Cc: Michael Ruettger <michael@ibmra.de> Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com> Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Bin Meng authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit d0c9606b upstream. Add Device IDs to the Intel GPU "spurious interrupt" quirk table. For these devices, unplugging the VGA cable and plugging it in again causes spurious interrupts from the IGD. Linux eventually disables the interrupt, but of course that disables any other devices sharing the interrupt. The theory is that this is a VGA BIOS defect: it should have disabled the IGD interrupt but failed to do so. See f67fd55f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") and 7c82126a ("PCI: Add new ID for Intel GPU "spurious interrupt" quirk") for some history. [bhelgaas: See link below for discussion about how to fix this more generically instead of adding device IDs for every new Intel GPU. I hope this is the last patch to add device IDs.] Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.comSigned-off-by:
Bin Meng <bmeng.cn@gmail.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
-
Breno Leitao authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit f1127439 upstream. uref->usage_index can be indirectly controlled by userspace, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This field is used as an array index by the hiddev_ioctl_usage() function, when 'cmd' is either HIDIOCGCOLLECTIONINDEX, HIDIOCGUSAGES or HIDIOCSUSAGES. For cmd == HIDIOCGCOLLECTIONINDEX case, uref->usage_index is compared to field->maxusage and then used as an index to dereference field->usage array. The same thing happens to the cmd == HIDIOC{G,S}USAGES cases, where uref->usage_index is checked against an array maximum value and then it is used as an index in an array. This is a summary of the HIDIOCGCOLLECTIONINDEX case, which matches the traditional Spectre V1 first load: copy_from_user(uref, user_arg, sizeof(*uref)) if (uref->usage_index >= field->maxusage) goto inval; i = field->usage[uref->usage_index].collection_index; return i; This patch fixes this by sanitizing field uref->usage_index before using it to index field->usage (HIDIOCGCOLLECTIONINDEX) or field->value in HIDIOC{G,S}USAGES arrays, thus, avoiding speculation in the first load. Cc: <stable@vger.kernel.org> Signed-off-by:
Breno Leitao <leitao@debian.org> v2: Contemplate cmd == HIDIOC{G,S}USAGES case Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Lukas Czerner authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 625ef8a3 upstream. Variable retries is not initialized in ext4_da_write_inline_data_begin() which can lead to nondeterministic number of retries in case we hit ENOSPC. Initialize retries to zero as we do everywhere else. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Fixes: bc0ca9df ("ext4: retry allocation when inline->extent conversion failed") Cc: stable@kernel.org Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 3df629d8 upstream. get in sync with mount_bdev() handling of the same Reported-by: syzbot+c54f8e94e6bba03b04e9@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit ccd3c437 upstream. The code cleaning transaction's lists of checkpoint buffers has a bug where it increases bh refcount only after releasing journal->j_list_lock. Thus the following race is possible: CPU0 CPU1 jbd2_log_do_checkpoint() jbd2_journal_try_to_free_buffers() __journal_try_to_free_buffer(bh) ... while (transaction->t_checkpoint_io_list) ... if (buffer_locked(bh)) { <-- IO completes now, buffer gets unlocked --> spin_unlock(&journal->j_list_lock); spin_lock(&journal->j_list_lock); __jbd2_journal_remove_checkpoint(jh); spin_unlock(&journal->j_list_lock); try_to_free_buffers(page); get_bh(bh) <-- accesses freed bh Fix the problem by grabbing bh reference before unlocking journal->j_list_lock. Fixes: dc6e8d66 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()") Fixes: be1158cc ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()") Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com CC: stable@vger.kernel.org Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Alexander Duyck authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit b6eae0f6 upstream. Unlike asynchronous initialization in the core we have not yet associated the device with the parent, and as such the device doesn't hold a reference to the parent. In order to resolve that we should be holding a reference on the parent until the asynchronous initialization has completed. Cc: <stable@vger.kernel.org> Fixes: 4d88a97a ("libnvdimm: ...base ... infrastructure") Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Stefan Nuernberger authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 076ed3da upstream. commit 40413955 ("Cipso: cipso_v4_optptr enter infinite loop") fixed a possible infinite loop in the IP option parsing of CIPSO. The fix assumes that ip_options_compile filtered out all zero length options and that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist. While this assumption currently holds true, add explicit checks for zero length and invalid length options to be safe for the future. Even though ip_options_compile should have validated the options, the introduction of new one-byte options can still confuse this code without the additional checks. Signed-off-by:
Stefan Nuernberger <snu@amazon.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Simon Veith <sveith@amazon.de> Cc: stable@vger.kernel.org Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit a8565319 upstream. xen_qlock_wait() isn't safe for nested calls due to interrupts. A call of xen_qlock_kick() might be ignored in case a deeper nesting level was active right before the call of xen_poll_irq(): CPU 1: CPU 2: spin_lock(lock1) spin_lock(lock1) -> xen_qlock_wait() -> xen_clear_irq_pending() Interrupt happens spin_unlock(lock1) -> xen_qlock_kick(CPU 2) spin_lock_irqsave(lock2) spin_lock_irqsave(lock2) -> xen_qlock_wait() -> xen_clear_irq_pending() clears kick for lock1 -> xen_poll_irq() spin_unlock_irq_restore(lock2) -> xen_qlock_kick(CPU 2) wakes up spin_unlock_irq_restore(lock2) IRET resumes in xen_qlock_wait() -> xen_poll_irq() never wakes up The solution is to disable interrupts in xen_qlock_wait() and not to poll for the irq in case xen_qlock_wait() is called in nmi context. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 2ac2a7d4 upstream. In the following situation a vcpu waiting for a lock might not be woken up from xen_poll_irq(): CPU 1: CPU 2: CPU 3: takes a spinlock tries to get lock -> xen_qlock_wait() frees the lock -> xen_qlock_kick(cpu2) -> xen_clear_irq_pending() takes lock again tries to get lock -> *lock = _Q_SLOW_VAL -> *lock == _Q_SLOW_VAL ? -> xen_poll_irq() frees the lock -> xen_qlock_kick(cpu3) And cpu 2 will sleep forever. This can be avoided easily by modifying xen_qlock_wait() to call xen_poll_irq() only if the related irq was not pending and to call xen_clear_irq_pending() only if it was pending. Cc: stable@vger.kernel.org Cc: Waiman.Long@hp.com Cc: peterz@infradead.org Signed-off-by:
-
Dr. Greg Wettstein authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit e487a0f5 upstream. Functionality of the xen-tpmfront driver was lost secondary to the introduction of xenbus multi-page support in commit ccc9d90a ("xenbus_client: Extend interface to support multi-page ring"). In this commit pointer to location of where the shared page address is stored was being passed to the xenbus_grant_ring() function rather then the address of the shared page itself. This resulted in a situation where the driver would attach to the vtpm-stubdom but any attempt to send a command to the stub domain would timeout. A diagnostic finding for this regression is the following error message being generated when the xen-tpmfront driver probes for a device: <3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62 <3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine the timeouts This fix is relevant to all kernels from 4.1 forward which is the release in which multi-page xenbus support was introduced. Daniel De Graaf formulated the fix by code inspection after the regression point was located. Fixes: ccc9d90a ("xenbus_client: Extend interface to support multi-page ring") Signed-off-by:
Dr. Greg Wettstein <greg@enjellic.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org # v4.1+ Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Joe Jin authored
BugLink: https://bugs.launchpad.net/bugs/1810947 commit 7250f422 upstream. xen_swiotlb_{alloc,free}_coherent() allocate/free memory based on the order of the pages and not size argument (bytes). This is inconsistent with range_straddles_page_boundary and memset which use the 'size' value, which may lead to not exchanging memory with Xen (range_straddles_page_boundary() returned true). And then the call to xen_swiotlb_free_coherent() would actually try to exchange the memory with Xen, leading to the kernel hitting an BUG (as the hypercall returned an error). This patch fixes it by making the 'size' variable be of the same size as the amount of memory allocated. CC: stable@vger.kernel.org Signed-off-by:
Joe Jin <joe.jin@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Christoph Helwig <hch@lst.de> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: John Sobecki <john.sobecki@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 78c9be61 ] Introduce a new flag, uc_buffer, to indicate that the controller requires the non-cached pages for stream buffers, either as a chip-specific requirement or specified via snoop=0 option. This improves the code-readability. Also, this patch fixes the incorrect behavior for C-Media chip where the stream buffers were never handled as non-cached due to the check of driver_type even if you pass snoop=0 option. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Paul Cercueil authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 54f919a0 ] The driver calls clk_get() with the clock name set to NULL, which means that the driver could only work when probed from devicetree. From now on, we explicitly require the driver to be probed from devicetree. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 3597dfe0 ] Instead of playing whack-a-mole and changing SEND_SIG_PRIV to SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init gets signals sent by the kernel, stop allowing a pid namespace init to ignore SIGKILL or SIGSTOP sent by the kernel. A pid namespace init is only supposed to be able to ignore signals sent from itself and children with SIG_DFL. Fixes: 921cf9f6 ("signals: protect cinit from unblocked SIG_DFL signals") Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
James Smart authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 0ef01a2d ] When running an mds diagnostic that passes frames with the switch, soft lockups are detected. The driver is in a CQE processing loop and has sufficient amount of traffic that it never exits the ring processing routine, thus the "lockup". Cap the number of elements in the work processing routine to 64 elements. This ensures that the cpu will be given up and the handler reschedule to process additional items. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alexandre Belloni authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit ae61cf5b ] When both uio and the uio drivers are built in the kernel, it is possible for a driver to register devices before the uio class is registered. This may result in a NULL pointer dereference later on in get_device_parent() when accessing the class glue_dirs spinlock. The trace looks like that: Unable to handle kernel NULL pointer dereference at virtual address 00000140 [...] [<ffff0000089cc234>] _raw_spin_lock+0x14/0x48 [<ffff0000084f56bc>] device_add+0x154/0x6a0 [<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128 [<ffff0000084f5edc>] device_create+0x54/0x60 [<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8 [<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558 [<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8 [<ffff0000083fd81c>] pci_device_probe+0x11c/0x180 [<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8 [<ffff0000084f8a24>] __driver_attach+0xbc/0xc0 [<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98 [<ffff0000084f81b8>] driver_attach+0x20/0x28 [<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228 [<ffff0000084f93c0>] driver_register+0x60/0xf8 [<ffff0000083fb918>] __pci_register_driver+0x40/0x48 Return EPROBE_DEFER in that case so the driver can register the device later. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Waiman Long authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit cfb03be6 ] The following lockdep splat was observed: [ 1222.241750] ====================================================== [ 1222.271301] WARNING: possible circular locking dependency detected [ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted [ 1222.326659] ------------------------------------------------------ [ 1222.356565] systemd-shutdow/1 is trying to acquire lock: [ 1222.382660] ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0 [ 1222.422928] [ 1222.422928] but task is already holding lock: [ 1222.451743] (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] : [ 1223.524987] Chain exists of: [ 1223.524987] (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock [ 1223.524987] [ 1223.594082] Possible unsafe locking scenario: [ 1223.594082] [ 1223.622630] CPU0 CPU1 [ 1223.645080] ---- ---- [ 1223.667404] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.691535] lock(&(&ioat_chan->cleanup_lock)->rlock); [ 1223.728657] lock(&(&ioat_chan->prep_lock)->rlock); [ 1223.765122] lock((&ioat_chan->timer)); [ 1223.784095] [ 1223.784095] *** DEADLOCK *** [ 1223.784095] [ 1223.813492] 4 locks held by systemd-shutdow/1: [ 1223.834677] #0: (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300 [ 1223.873310] #1: (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660 [ 1223.913604] #2: (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660 [ 1223.954000] #3: (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma] In the ioat_shutdown() function: spin_lock_bh(&ioat_chan->prep_lock); set_bit(IOAT_CHAN_DOWN, &ioat_chan->state); del_timer_sync(&ioat_chan->timer); spin_unlock_bh(&ioat_chan->prep_lock); According to the synchronization rule for the del_timer_sync() function, the caller must not hold locks which would prevent completion of the timer's handler. The timer structure has its own lock that manages its synchronization. Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from trying to use that device anyway, there is probably no need to call del_timer_sync() while holding the prep_lock. So the del_timer_sync() call is now moved outside of the prep_lock critical section to prevent the circular lock dependency. Signed-off-by:
Waiman Long <longman@redhat.com> Reviewed-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Loic Poulain authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 8b97d73c ] The ChipIdea IRQ is disabled before scheduling the otg work and re-enabled on otg work completion. However if the job is already scheduled we have to undo the effect of disable_irq int order to balance the IRQ disable-depth value. Fixes: be6b0c1b ("usb: chipidea: using one inline function to cover queue work operations") Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Shaohua Li authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit d595567d ] If we change the number of array's device after device is removed from array, then add the device back to array, we can see that device is added as active role instead of spare which we expected. Please see the below link for details: https://marc.info/?l=linux-raid&m=153736982015076&w=2 This is caused by that we prefer to use device's previous role which is recorded by saved_raid_disk, but we should respect the new number of conf->raid_disks since it could be changed after device is removed. Reported-by:
Gioh Kim <gi-oh.kim@profitbricks.com> Tested-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit f18b2b83 ] If the starting block number of either the source or destination file exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL. Also fixed the helper function mext_check_coverage() so that if the logical block is beyond EOF, make it return immediately, instead of looping until the block number wraps all the away around. This takes long enough that if there are multiple threads trying to do pound on an the same inode doing non-sensical things, it can end up triggering the kernel's soft lockup detector. Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com Signed-off-by:
-
Javier Martinez Canillas authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 0d6d0d62 ] For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 47db7873 ] In megasas_mgmt_compat_ioctl_fw(), to handle the structure compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket 'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle the packet. Since the two data structures have different fields, the data is copied from 'cioc' to 'ioc' field by field. In the copy process, 'sense_ptr' is prepared if the field 'sense_len' is not null, because it will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and saved to kernel-space variables 'local_sense_off' and 'user_sense_off' respectively. Given that 'ioc->sense_off' is also copied from 'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the same value. However, 'cioc' is in the user space and a malicious user can race to change the value of 'cioc->sense_off' after it is copied to 'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing so, the attacker can inject different values into 'local_sense_off' and 'user_sense_off'. This can cause undefined behavior in the following execution, because the two variables are supposed to be same. This patch enforces a check on the two kernel variables 'local_sense_off' and 'user_sense_off' to make sure they are the same after the copy. In case they are not, an error code EINVAL will be returned. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit fd47d919 ] If a target disconnects during a PIO data transfer the command may fail when the target reconnects: scsi host1: DMA length is zero! scsi host1: cur adr[04380000] len[00000000] The scsi bus is then reset. This happens because the residual reached zero before the transfer was completed. The usual residual calculation relies on the Transfer Count registers. That works for DMA transfers but not for PIO transfers. Fix the problem by storing the PIO transfer residual and using that to correctly calculate bytes_sent. Fixes: 6fe07aaf ("[SCSI] m68k: new mac_esp scsi driver") Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
Martin Willi authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit a9911937 ] When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Douglas Anderson authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit b432414b ] If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc2 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828 ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-gpio has the same problem. Let's fix it there too. Fixes: b4c45fe9 ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Douglas Anderson authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 0d5b476f ] If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice it looks like nonsense. The problem is fairly well described in commit 1cf86bc2 ("pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and commit 05e0c828 ("pinctrl: msm: Fix msm_config_group_get() to be compliant"), but it was pointed out that ssbi-mpp has the same problem. Let's fix it there too. NOTE: in case it's helpful to someone reading this, the way to tell whether to do the -EINVAL or not is to look at the PCONFDUMP for a given attribute. If the last element (has_arg) is false then you need to do the -EINVAL trick. ALSO NOTE: it seems unlikely that the values returned when we try to get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg" is false for that one, but I guess it's still fine to return different values so I kept doing that. It seems like another driver (ssbi-gpio) uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something similar so maybe a future change should do that here too. Fixes: cfb24f6e ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver") Signed-off-by:
-
Stephen Boyd authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 89c68b10 ] It looks like we parse the drive strength setting here, but never actually write it into the hardware to update it. Parse the setting and then write it at the end of the pinconf setting function so that it actually sticks in the hardware. Fixes: 0e948042 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode") Cc: Doug Anderson <dianders@chromium.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1810947 [ Upstream commit 24071406 ] Bay and Cherry Trail DSTDs represent a different set of devices depending on which OS the device think it is booting. One set of decices for Windows and another set of devices for Android which targets the Android-x86 Linux kernel fork (which e.g. used to have its own display driver instead of using the i915 driver). Which set of devices we are actually going to get is out of our control, this is controlled by the ACPI OSID variable, which gets either set through an EFI setup option, or sometimes is autodetected. So we need to support both. This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we get for the first resp. second DMA controller on Cherry Trail devices when OSID is set to Android. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
