- 22 Aug, 2017 23 commits
-
-
git://github.com/skeggsb/linuxDave Airlie authored
Not a lot that's ready to be included this round for Nouveau. GP108 modesetting support, and misc other fixes. * 'linux-4.14' of git://github.com/skeggsb/linux: drm/nouveau/kms/nv50: perform null check on msto[i] rathern than msto drm/nouveau/pci/msi: disable MSI on big-endian platforms by default drm/nouveau: silence suspend/resume debugging messages drm/nouveau/kms/nv04-nv4x: fix exposed format list drm/nouveau/kms/nv10-nv40: add NV21 support to overlay drm/nouveau/kms/nv04-nv40: improve overlay error detection, fix pitch setting drm/nouveau/kms/nv04-nv40: prevent undisplayable framebuffers from creation drm/nouveau/mpeg: print more debug info when rejecting dma objects drm/nouveau/fb/gf100-: zero mmu debug buffers drm/nouveau/bar/gf100: add config option to limit BAR2 to 16MiB initial support (display-only) for GP108 drm/nouveau/falcon: use a more reasonable msgqueue timeout value drm/nouveau/disp: Silence DCB warnings. drm/nouveau/bios: Demote missing fp table message to NV_DEBUG. drm/nouveau/pmu/gt215-: abstract detection of whether reset is needed drm/nouveau/pmu/gt215: fix reset drm/nouveau/mc/gf100: add pmu to reset mask drm/nouveau/disp/gf119-: avoid creating non-existent heads drm/nouveau/therm/gm200: Added drm/nouveau/therm: fix spelling mistake on array thresolds
-
Colin Ian King authored
The null check on the array msto is incorrect since msto is never null. The null check should be instead on msto[i] since this is being dereferenced in the call to drm_mode_connector_attach_encoder. Thanks to Emil Velikov for pointing out the mistake in my original fix and for suggesting the correct fix. Detected by CoverityScan, CID#1375915 ("Array compared against 0") Fixes: f479c0ba ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
It appears that MSI does not work on either G5 PPC nor on a E5500-based platform, where other hardware is reported to work fine with MSI. Both tests were conducted with NV4x hardware, so perhaps other (or even this) hardware can be made to work. It's still possible to force-enable with config=NvMSI=1 on load. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Ben Skeggs authored
These are particularly annoying on Optimus systems where these paths can be called regularly. Signed-off-by: -
Ilia Mirkin authored
drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality, ARGB8888's 32-bit depth messes up some formulas that weren't meant for it, and the alpha is fairly meaningless for the primary plane. The modesetting logic appears to be fully prepared for RGB565 as well as XRGB1555 however, as tested with modetest. Signed-off-by:
-
Ilia Mirkin authored
Signed-off-by:
-
Ilia Mirkin authored
We were previously setting the pitch based on a perfectly packed buffer. This does not necessarily happen. Either modetest started generating such buffers recently, or earlier testing only happened with well-picked overlay sizes. While we're at it, beef up and refactor the error state detection. Signed-off-by:
-
Ilia Mirkin authored
Pre-nv50 YUV overlays have stringent requirements for working with the internal machinery. Instead of rejecting these at update_plane time, we should instead prevent the framebuffers from being created in the first place. Signed-off-by:
-
Ilia Mirkin authored
Signed-off-by:
Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by:
-
Ben Skeggs authored
These are used for accesses to sparse mappings, and we want reads of such mappings to return 0. Signed-off-by: -
Ben Skeggs authored
Useful for testing, and for the userspace build where we can't kick a framebuffer driver off the device. Signed-off-by: -
Ilia Mirkin authored
Forked from GP107 implementation. Secboot/gr left out as we don't have signed blobs from NVIDIA in linux-firmware. (Ben): Was unable to mmiotrace the binary driver for unknown reasons, so not able to 100% confirm that no other changes from GP107 are needed. Quick testing shows it seems to work well enough for display. Due to NVIDIA dragging their heels on getting signed firmware to us, this is the best we can do for now. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Rosen Penev authored
Most of these errors seem to be WFD related. Official documentation says dcb type 8 is reserved. It's probably used for WFD. Silence the warning in either case. Connector type 70 is stated to be a virtual connector for WiFi display. Since we know this, don't warn that we don't. Signed-off by: Rosen Penev <rosenp@gmail.com> Signed-off-by: -
Rosen Penev authored
This warning seems to pop up mainly in laptop cards. Silence it as it is expected behavior. Signed-off by: Rosen Penev <rosenp@gmail.com> Signed-off-by: -
Ben Skeggs authored
GT215, GF100-GP100, and GP10x are all different. Signed-off-by: -
Ben Skeggs authored
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other unknown register needs to be poked instead. Signed-off-by: -
Ben Skeggs authored
An upcoming commit will replace direct NV_PMC register bashing from PMU with a call to the proper function. Signed-off-by: -
Ilia Mirkin authored
We assume that each board has 4 heads for GF119+. However this is not necessarily true - in the case of a GP108 board, the register indicated that there were only 2. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by:
-
Karol Herbst authored
This allows temperature readouts on maxwell2 GPUs. Signed-off-by:
Karol Herbst <karolherbst@gmail.com> Signed-off-by:
-
Colin Ian King authored
Array thresolds should be named thresholds, rename it. Also make it static static const char * const Signed-off-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
imx-drm: lock scanout transfers for consecutive bursts - Lock the IDMAC scanout channel for multiple back-to-back bursts if possible, to improve memory bandwidth utilisation. - Replace a few occurences of state->fb with the already existing local fb variable in ipu_plane_atomic_update * tag 'imx-drm-next-2017-07-18' of git://git.pengutronix.de/git/pza/linux: drm/imx: lock scanout transfers for consecutive bursts drm/imx: ipuv3-plane: use fb local variable instead of state->fb
-
git://anongit.freedesktop.org/git/drm-intelDave Airlie authored
Final pile of features for 4.14 - New ioctl to change NOA configurations, plus prep (Lionel) - CCS (color compression) scanout support, based on the fancy new modifier additions (Ville&Ben) - Document i915 register macro style (Jani) - Many more gen10/cnl patches (Rodrigo, Pualo, ...) - More gpu reset vs. modeset duct-tape to restore the old way. - prep work for cnl: hpd_pin reorg (Rodrigo), support for more power wells (Imre), i2c pin reorg (Anusha) - drm_syncobj support (Jason Ekstrand) - forcewake vs gpu reset fix (Chris) - execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris) - switch to idr/radixtree instead of the resizing ht for execbuf id->vma lookups (Chris) gvt: - MMIO save/restore optimization (Changbin) - Split workload scan vs. dispatch for more parallel exec (Ping) - vGPU full 48bit ppgtt support (Joonas, Tina) - vGPU hw id expose for perf (Zhenyu) Bunch of work all over to make the igt CI runs more complete/stable. Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for progress in getting this ready. Next week we're going into production mode (i.e. will send results to intel-gfx) on hsw, more platforms to come. Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for being an awesome co-maintainer the past few years, and all the best for Jani, Joonas&Rodrigo as the new maintainers! * tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits) drm/i915: Update DRIVER_DATE to 20170818 drm/i915/bxt: use NULL for GPIO connection ID drm/i915: Mark the GT as busy before idling the previous request drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment drm/i915: Replace execbuf vma ht with an idr drm/i915: Simplify eb_lookup_vmas() drm/i915: Convert execbuf to use struct-of-array packing for critical fields drm/i915: Check context status before looking up our obj/vma drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs drm/i915: Stop touching forcewake following a gen6+ engine reset MAINTAINERS: drm/i915 has a new maintainer team drm/i915: Split pin mapping into per platform functions drm/i915/opregion: let user specify override VBT via firmware load drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake. drm/i915/gen10: implement gen 10 watermarks calculations drm/i915/cnl: Fix LSPCON support. drm/i915/vbt: ignore extraneous child devices for a port drm/i915/cnl: Setup PAT Index. drm/i915/edp: Allow alternate fixed mode for eDP if available. drm/i915: Add support for drm syncobjs ...
-
- 21 Aug, 2017 3 commits
-
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v4.14-rc1 This contains a couple of fixes and improvements for host1x, with some preparatory work for Tegra186 support. The remainder is cleanup and minor bugfixes for Tegra DRM along with enhancements to debuggability. There have also been some enhancements to the kernel interfaces for host1x job submissions and support for mmap'ing PRIME buffers directly, all of which get the interfaces very close to ready for serious work. * tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits) drm/tegra: Prevent BOs from being freed during job submission drm/tegra: gem: Implement mmap() for PRIME buffers drm/tegra: Support render node drm/tegra: sor: Trace register accesses drm/tegra: dpaux: Trace register accesses drm/tegra: dsi: Trace register accesses drm/tegra: hdmi: Trace register accesses drm/tegra: dc: Trace register accesses drm/tegra: sor: Use unsigned int for register offsets drm/tegra: hdmi: Use unsigned int for register offsets drm/tegra: dsi: Use unsigned int for register offsets drm/tegra: dpaux: Use unsigned int for register offsets drm/tegra: dc: Use unsigned int for register offsets drm/tegra: Fix NULL deref in debugfs/iova drm/tegra: switch to drm_*_get(), drm_*_put() helpers drm/tegra: Set MODULE_FIRMWARE for the VIC drm/tegra: Add CONFIG_OF dependency gpu: host1x: Support sub-devices recursively gpu: host1x: fix error return code in host1x_probe() gpu: host1x: Fix bitshift/mask multipliers ...
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
this cycle has been fairly calm in etnaviv land with most of the action happening on the userspace side. Notable changes: - Improvements to CONFIG option handling to make it harder for users to shoot themselves in the foot due to kernel misconfiguration. - Tweaked GEM object population, so that userspace can take considerate action when memory allocation fails, rather than waking the raging OOM killer beast. * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: drm/etnaviv: switch GEM allocations to __GFP_RETRY_MAYFAIL drm/etnaviv: don't fail GPU bind when CONFIG_THERMAL isn't enabled drm/etnaviv: switch to drm_*{get,put} helpers drm/etnaviv: select CMA and DMA_CMA if available drm/etnaviv: populate GEM objects on cpu_prep drm/etnaviv: reduce allocation failure message severity drm/etnaviv: don't trigger OOM killer when page allocation fails
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
This is the amdkfd pull request for 4.14 merge window. AMD has started cleaning the pipe and sending patches from their internal development to the upstream community. The plan as I understand it is to first get all the non-dGPU patches to upstream and then move to upstream dGPU support. The patches here are relevant only for Kaveri and Carrizo. The following is a summary of the changes: - Add new IOCTL to set a Scratch memory VA - Update PM4 headers for new firmware that support scratch memory - Support image tiling mode - Remove all uses of BUG_ON - Various Bug fixes and coding style fixes * tag 'drm-amdkfd-next-2017-08-18' of git://people.freedesktop.org/~gabbayo/linux: (24 commits) drm/amdkfd: Implement image tiling mode support v2 drm/amdgpu: Add kgd kfd interface get_tile_config() v2 drm/amdkfd: Adding new IOCTL for scratch memory v2 drm/amdgpu: Add kgd/kfd interface to support scratch memory v2 drm/amdgpu: Program SH_STATIC_MEM_CONFIG globally, not per-VMID drm/amd: Update MEC HQD loading code for KFD drm/amdgpu: Disable GFX PG on CZ drm/amdkfd: Update PM4 packet headers drm/amdkfd: Clamp EOP queue size correctly on Gfx8 drm/amdkfd: Add more error printing to help bringup v2 drm/amdkfd: Handle remaining BUG_ONs more gracefully v2 drm/amdkfd: Allocate gtt_sa_bitmap in long units drm/amdkfd: Fix doorbell initialization and finalization drm/amdkfd: Remove BUG_ONs for NULL pointer arguments drm/amdkfd: Remove usage of alloc(sizeof(struct... drm/amdkfd: Fix goto usage v2 drm/amdkfd: Change x==NULL/false references to !x drm/amdkfd: Consolidate and clean up log commands drm/amdkfd: Clean up KFD style errors and warnings v2 drm/amdgpu: Remove hard-coded assumptions about compute pipes ...
-
- 20 Aug, 2017 3 commits
-
-
Dave Airlie authored
Merge tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next Allwinner DRM changes for 4.14 A few changes, but most notably improving the HDMI support merged in 4.13, by reporting the DDC adapter as an i2c bus, and by adding CEC support through the CEC framework. * tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: sun4i_hdmi: add CEC support dt-bindings: display: sunxi: Improve endpoint ID scheme readability drm/sun4i: tcon: remove unused function drm/sun4i: Remove useless atomic_check drm/sun4i: Add if statement instead of depends on drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus drm/sun4i: constify drm_plane_helper_funcs
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More changes for 4.14. Highlights: - command submission overhead improvements - Huge page support for vega10 - physical mode support for mjpeg for asics that don't support UVD vm - improve ttm_mem_type_manager_func debug - misc ttm fixes, cleanups - misc gpuvm cleanups * 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (26 commits) drm/ttm: use reservation_object_trylock in ttm_bo_individualize_resv v2 drm/amdgpu: fix vega10 graphic hang issue in S3 test drm/amdgpu: bump version for support of UVD MJPEG decode drm/amdgpu: add MJPEG check for UVD physical mode msg buffer drm/ttm: Fix accounting error when fail to get pages for pool drm/amd/amdgpu: expose fragment size as module parameter (v2) drm/amd/amdgpu: store fragment_size in vm_manager drm/amdgpu: rename VM invalidated to moved drm/amdgpu: separate bo_va structure drm/amdgpu: drop the extra VM huge page flag v2 drm/amdgpu: remove superflous amdgpu_bo_kmap in the VM drm/amdgpu: cleanup static CSA handling drm/amdgpu: SHADOW and VRAM_CONTIGUOUS flags shouldn't be used by userspace drm/amdgpu: save list length when fence is signaled drm/amdgpu: move vram usage tracking into the vram manager v2 drm/amdgpu: move gtt usage tracking into the gtt manager v2 drm/amdgpu: move debug print into the MM managers drm/amdgpu: fix incorrect use of the lru_lock drm/radeon: fix incorrect use of the lru_lock drm/ttm: make ttm_mem_type_manager_func debug more useful ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Cross-subsystem Changes: - Add tinydrm to MAINTAINERS using -misc tree and Noralf as maintainer (Noralf) Core Changes: - Finish dumb_mmap_offset cleanup by removing gem_cma_dumb_map_offset() (Noralf) - Add gem_framebuffer helper to facilitate removal of fb_cma cargo cult (Noralf) Driver Changes: - Various trivial patches Cc: Noralf Trønnes <noralf@tronnes.org> * tag 'drm-misc-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-misc: drm: udl: constify usb_device_id drm/gma500: fix potential NULL pointer dereference dereference drm/tinydrm: make function st7586_pipe_enable static MAINTAINERS: Add drm/tinydrm maintainer entry drm/vc4: Use drm_gem_fb_create() drm/pl111: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb() drm/fb-cma-helper: Use drm_gem_framebuffer_helper drm: Add GEM backed framebuffer library
-
- 18 Aug, 2017 11 commits
-
-
Daniel Vetter authored
Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
Christian König authored
Fixes a false positive from might_sleep(). The reservation object is freshly initialized, so nobody else can hold the mutex but the function is called from atomic context. v2: Correctly invert the check as well. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ken Wang authored
mmVGT_INDEX_TYPE has no default value, need to make sure it's initialized when gfx is initialized. Signed-off-by:
Ken Wang <Ken.Wang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Sean Paul authored
Archit requested this backmerge to facilitate merging some patches depending on changes between -rc2 & -rc5 Signed-off-by:Sean Paul <seanpaul@chromium.org>
-
Andy Shevchenko authored
The commit 213e08ad ("drm/i915/bxt: add bxt dsi gpio element support") enables GPIO support for Broxton based platforms. While using that API we might get into troubles in the future, because we can't rely on label name in the driver since vendor firmware might provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in which case the request will fail). To avoid inconsistency and potential issues we have two options: a) generate GPIO ACPI mapping table and supply it via acpi_dev_add_driver_gpios(), or b) just pass NULL as connection ID. The b) approach is much simpler and would work since the driver relies on GPIO indices only. Moreover, the _CRS fallback mechanism, when requesting GPIO, has been made stricter, and supplying non-NULL connection ID when neither _DSD, nor GPIO ACPI mapping is present, is making request fail. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921 Fixes: f10e4bf6 ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817105541.63914-1-andriy.shevchenko@linux.intel.com
-
Chris Wilson authored
In a synchronous setup, we may retire the last request before we complete allocating the next request. As the last request is retired, we queue a timer to mark the device as idle, and promptly have to execute ad cancel that timer once we complete allocating the request and need to keep the device awake. If we rearrange the mark_busy() to occur before we retire the previous request, we can skip this ping-pong. v2: Joonas pointed out that unreserve_seqno() was now doing more than doing seqno handling and should be renamed to reflect its wider purpose. That also highlighted the new asymmetry with reserve_seqno(), so fixup that and rename both to [un]reserve_engine(). Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817144719.10968-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
The word out was dropped from the sentence across the line break, put it back. Signed-off-by:
-
Chris Wilson authored
This was the competing idea long ago, but it was only with the rewrite of the idr as an radixtree and using the radixtree directly ourselves, along with the realisation that we can store the vma directly in the radixtree and only need a list for the reverse mapping, that made the patch performant enough to displace using a hashtable. Though the vma ht is fast and doesn't require any extra allocation (as we can embed the node inside the vma), it does require a thread for resizing and serialization and will have the occasional slow lookup. That is hairy enough to investigate alternatives and favour them if equivalent in peak performance. One advantage of allocating an indirection entry is that we can support a single shared bo between many clients, something that was done on a first-come first-serve basis for shared GGTT vma previously. To offset the extra allocations, we create yet another kmem_cache for them. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since the introduction of being able to perform a lockless lookup of an object (i915_gem_object_get_rcu() in fbbd37b3 ("drm/i915: Move object release to a freelist + worker") we no longer need to split the object/vma lookup into 3 phases and so combine them into a much simpler single loop. Signed-off-by:
-
Chris Wilson authored
When userspace is doing most of the work, avoiding relocs (using NO_RELOC) and opting out of implicit synchronisation (using ASYNC), we still spend a lot of time processing the arrays in execbuf, even though we now should have nothing to do most of the time. One issue that becomes readily apparent in profiling anv is that iterating over the large execobj[] is unfriendly to the loop prefetchers of the CPU and it much prefers iterating over a pair of arrays rather than one big array. v2: Clear vma[] on construction to handle errors during vma lookup Signed-off-by:
-
Chris Wilson authored
Since we keep the context around across the slow lookup where we may drop the struct_mutex, we should double check that the context is still valid upon reacquisition. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
