- 18 May, 2018 2 commits
-
-
Melvin Vermeeren authored
--nextPart3916812.EicPReet6m Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Mytek manufactures some equipment with DICE-based firewire ports. These devices contain old versions of DICE firmware which lacks detailed stream format reporting for all sampling clock modes. Building upon the recent work by Takashi Sakamoto, hard-coded parameters are added for the Stereo 192 DSD-DAC. When the device vendor and model match the coded parameters are copied into the stream format cache. Signed-off-by:
Melvin Vermeeren <mail@mel.vin> Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Ruslan Bilovol authored
UAC3 channel map is created during interface parsing, and in some cases was not freed in failure paths. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by:
-
- 17 May, 2018 3 commits
-
-
Takashi Iwai authored
The error messages at sanity checks of memory pages tend to repeat too many times once when it hits, and without the rate limit, it may flood and become unreadable. Replace such messages with the *_ratelimited() variant. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1093027Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistakes in audigy_outs arrays. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Takashi Iwai authored
The commit 289ca025 ("ALSA: Use priority list for managing device list") changed the way to register/disconnect/free devices via a single priority list. This helped to make behavior consistent, but it also changed a slight behavior change: namely, the control device is registered earlier than others, while it was supposed to be the very last one. I've put SNDRV_DEV_CONTROL in the current position as the release of ctl elements often conflict with the private ctl elements some PCM or other components may create, which often leads to a double-free. But, the order of register and disconnect should be indeed fixed as expected in the early days: the control device gets registered at last, and disconnected at first. This patch changes the priority list order to move SNDRV_DEV_CONTROL as the last guy to assure the register / disconnect order. Meanwhile, for keeping the messy resource release order, manually treat the control and lowlevel devices as last freed one. Additional note: The lowlevel device is the device where a card driver creates at probe. And, we still keep the release order control -> lowlevel, as there might be link from a control element back to a lowlevel object. Fixes: 289ca025 ("ALSA: Use priority list for managing device list") Reported-by:
Tzung-Bi Shih <tzungbi@google.com> Tested-by:
-
- 16 May, 2018 1 commit
-
-
Takashi Iwai authored
retire_capture_urb() may print warning messages when the given URB doesn't align, and this may flood the system log easily. Put the rate limit to the message for avoiding it. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1093485Signed-off-by:
-
- 15 May, 2018 9 commits
-
-
Takashi Sakamoto authored
This module has a table for parameters of each effects. This table is read-only and can have 'const' qualifier. This commit adds this optimization. Signed-off-by:
-
Takashi Sakamoto authored
This module has some function-local strings just for printk therefore it can be merged into format string. This commit applies this optimization. Signed-off-by:
-
Takashi Sakamoto authored
This module has some strings just for printk therefore they can be read-only. This commit applies this optimization. Signed-off-by:
-
Takashi Sakamoto authored
An array of templates for control element set is passed as an argument for snd_hda_add_new_ctls(). This argument has 'const' qualifier therefore the passed array can have the qualifier. This commit adds this optimization. Signed-off-by:
-
Jorge Sanjuan authored
Obtain the number of channels for the Input Terminal from the Logical Cluster Descriptor. This achieves a useful minimal parsing of this unit so it can be used in other units in the topology. Signed-off-by:
Jorge Sanjuan <jorge.sanjuan@codethink.co.uk> Reviewed-by:
-
Jorge Sanjuan authored
This adds support for the UAC3 insertion controls. The status is reported as a boolean value in the same way it used to do for UAC2. Hence, the presence of any connector in the response will make the control saying the jack is connected. The UAC2 support for this control has been moved to a dedicated control for connectors as both UAC2 and UAC3 follow a specific Control Request Parameter Block for this control. This parameter block for UAC3 could not be read in the same simplistic manner as in UAC2. This implementation is not requesting additional information from the HIGH CAPABILITY Connectors descriptor. Tested with an UAC3 device with UAC2 as legacy configuration. The connector status can be read with `amixer` and the interrupt is also caught with `alsactl monitor`. Signed-off-by:
-
Jorge Sanjuan authored
This adds support for the MIXER UNIT in UAC3. All the information is obtained from the (HIGH CAPABILITY) Cluster's header. We don't read the rest of the logical cluster to obtain the channel config as that wont make any difference in the current mixer behaviour. The name of the mixer unit is not yet requested as there is not support for the UAC3 Class Specific String requests. Tested in an UAC3 device working as a HEADSET with a basic mixer unit (same as the one in the BADD spec) with no controls. Signed-off-by:
-
Takashi Iwai authored
Back-merge of UAC3 fixes for applying further enhancements. Signed-off-by: -
Jorge Sanjuan authored
bmAtributes offset doesn't exist in the UAC3 CS_EP descriptor. Hence, checking for pitch control as if it was UAC2 doesn't make any sense. Use the defined UAC3 offsets instead. Fixes: 9a2fe9b8 ("ALSA: usb: initial USB Audio Device Class 3.0 support") Signed-off-by:
-
- 14 May, 2018 5 commits
-
-
Fengguang Wu authored
sound/pci/hda/patch_ca0132.c:5062:50-51: WARNING: Use ARRAY_SIZE sound/pci/hda/patch_ca0132.c:5092:50-51: WARNING: Use ARRAY_SIZE Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element Semantic patch information: This makes an effort to find cases where ARRAY_SIZE can be used such as where there is a division of sizeof the array by the sizeof its first element or by any indexed element or the element type. It replaces the division of the two sizeofs by ARRAY_SIZE. Generated by: scripts/coccinelle/misc/array_size.cocci Fixes: 47cdf76e ("ALSA: hda/ca0132: Add new control changes for SBZ + R3Di") CC: Connor McAdams <conmanx360@gmail.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Takashi Sakamoto authored
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset of TLV data. This commit applies a code optimization. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Takashi Sakamoto authored
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset of TLV data. This commit applies a code optimization. Signed-off-by:
-
Takashi Sakamoto authored
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset of TLV data. This commit applies a code optimization. Signed-off-by:
-
Takashi Sakamoto authored
A commit 08f9f448 ('ALSA: core api: define offsets for TLV items') introduced a series of macro for offset of db-scale type of TLV, however there are some types of TLV to add similar macros. This commit complements macros for offset of db-minmax and db-linear types of TLV data. Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
- 13 May, 2018 20 commits
-
-
Jeremy Soller authored
This adds support for the P950ER, which has the same required fixup as the P950HR, but has a different PCI ID. Signed-off-by:
Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Federico Cuello authored
Currently it's not possible to set volume lower than 26% (it just mutes). Also fixes this warning: Warning! Unlikely big volume range (=9472), cval->res is probably wrong. [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1 , and volume works fine for full range. Signed-off-by:
Federico Cuello <fedux@fedux.com.ar> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
Power-saving is causing loud plops on the Lenovo C50 All in one, add it to the blacklist. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1572975Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Alberto Aguirre authored
Wait for Axe-Fx III to fully bootup before initializing card. Signed-off-by:
Alberto Aguirre <albaguirre@gmail.com> Signed-off-by:
-
Ranjani Sridharan authored
Currently, there are no pre-defined accessors for the elements in topology TLV data. In the absence of such offsets, the tlv data will have to be decoded using hardwired offset numbers 0-N depending on the type of TLV. This patch defines accessor offsets for the type, length, min and mute/step items in TLV data for DB_SCALE type tlv's. These will be used by drivers to decode the TLV data while loading topology thereby improving code readability. The type and len offsets are common for all TLV types. The min and step/mute offsets are specific to DB_SCALE tlv type. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Connor McAdams authored
This patch adds new controls to set the effect levels on the R3Di and SBZ. It also adds vmaster controls to control all surround sound channels. So that Surround effect switch doesn't conflict with Surround volume, FX: prefix added to all effect related switches. Tested-by:
Mariusz Ceier <mceier+kernel@gmail.com> Signed-off-by:
Connor McAdams <conmanx360@gmail.com> Reviewed-by:
-
Connor McAdams authored
Add function to set vipsource on cards that use_alt_controls. Different sequence. Also, add cvoice_switch_set at end of ca0132_select_in so that when switching between inputs cvoice state is maintained. Signed-off-by:
-
Connor McAdams authored
Adds lookup table for floating point decibel volume, and new functions to allow for setting the decibel level on the DSP. Signed-off-by:
-
Connor McAdams authored
Add functions ca0132_alt_select_out and ca0132_alt_select_in for switching outputs and inputs for r3di and sbz. Also, add enumerated controls for selecting output and input source. Signed-off-by:
-
Connor McAdams authored
This patch adds the ability to change the src_id on scp commands, which is used in the dsp setup of the Recon3Di and the Sound Blaster Z. It also makes sure to maintain backwards compatibility with the older dspio_set_uint_param function, and sets it's src to the default 0x20. Signed-off-by:
-
Connor McAdams authored
Adds dsp setup functions for Recon3Di as well as the GPIO functions specific to it. Signed-off-by:
-
Connor McAdams authored
Add dsp setup related functions for the Sound Blaster Z, along with other helper functions. Also, add sbz_dsp_startup_check, which fixes a bug where the card sometimes starts up and has no sound. Signed-off-by:
-
Connor McAdams authored
This patch updates core functions to accommodate the Sound Blaster Z and Recon3Di by changing which functions they use. It also adds the ability to enable/disable streams. Signed-off-by:
-
Connor McAdams authored
This patch adds extra init functions for the Sound Blaster Z and Recon3Di. It also adds more checks to make sure that the DSP isn't downloaded twice on startup, by checking if the dsp_state is already set to DSP_DOWNLOADED. It also adds the ability to re-download the DSP on a resume. It also changes the init verbs table to apply to all codecs, and takes the two specific end verbs and puts them into a separate function in ca0132_init instead. GPIO functions are also added. Signed-off-by:
-
Connor McAdams authored
This patch adds extra functions for shutdown on the Sound Blaster Z and Recon3Di. The Recon3Di only has one specific functions, which sets the GPIO data pins to 0 to prevent a popping noise. The Sound Blaster Z exit sequence was taken from Windows. Without this exit function, the card will not reload properly unless the PC has been shutdown to clear the onboard memory. There are commented out functions currently in the sbz_exit_chip function that are added in a later patch. Also, a reboot notify function has been added, to make sure these functions are ran before a reboot. This helps when using the card through VFIO in a virtual machine, to make sure the card reloads the DSP properly. Signed-off-by:
-
Connor McAdams authored
This patch adds iomapping for the region2 section of memory on the SBZ. This memory region is used in later patches for setting inputs and outputs. If the mapping fails, the quirk is changed back to QUIRK_NONE to avoid attempts to write to uninitialized memory. It also adds a new exit sequence to unmap the iomem for the SBZ. [ Reordered linux/*.h inclusion in the patch by tiwai ] Signed-off-by:
-
Connor McAdams authored
This patch adds an unsolicited response tag for the front headphone panel which uses the same hp_callback as the rear headphone detection. This patch also adds pincfgs for the R3Di and SBZ which were taken from the Windows driver. The pins are also defined in the function ca0132_config. Both the R3Di and SBZ are also given a max out channel value of 6 to handle 5.1 surround sound in later patches. Signed-off-by:
-
Connor McAdams authored
This patch adds PCI quirk ID's for the Sound Blaster Z and Recon3Di. Only the currently tested ID's have been added. This patch also adds the ability to load alternative firmwares for each card, the firmwares can be obtained from within the Windows driver. The Recon3Di uses "ctefx-r3di.bin" and the Sound Blaster Z uses "ctefx-sbz.bin". If the alternative firmware for the given quirk is not found, the original ctefx.bin will be used. This has been confirmed to work for both the R3Di and the SBZ. This patch also makes the character array *dirstr a const. Signed-off-by:
-
Wenwen Wang authored
In snd_ctl_elem_add_compat(), the fields of the struct 'data' need to be copied from the corresponding fields of the struct 'data32' in userspace. This is achieved by invoking copy_from_user() and get_user() functions. The problem here is that the 'type' field is copied twice. One is by copy_from_user() and one is by get_user(). Given that the 'type' field is not used between the two copies, the second copy is *completely* redundant and should be removed for better performance and cleanup. Also, these two copies can cause inconsistent data: as the struct 'data32' resides in userspace and a malicious userspace process can race to change the 'type' field between the two copies to cause inconsistent data. Depending on how the data is used in the future, such an inconsistency may cause potential security risks. For above reasons, we should take out the second copy. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ruslan Bilovol authored
Recently released USB Audio Class 3.0 specification contains BADD (Basic Audio Device Definition) document which describes pre-defined UAC3 configurations. BADD support is mandatory for UAC3 devices, it should be implemented as a separate USB device configuration. As per BADD document, class-specific descriptors shall not be included in the Device’s Configuration descriptor ("inferred"), but host can guess them from BADD profile number, number of endpoints and their max packed sizes. This patch adds support of all BADD profiles from the spec Signed-off-by:
-
