- 19 Nov, 2016 17 commits
-
-
Masahiro Yamada authored
I hope this will make the code a little more readable. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
Masahiro Yamada authored
There is no need to initialize oobregion and section since they will be filled by mtd_ooblayout_find_region(). Signed-off-by:
-
Sudip Mukherjee authored
debugfs_create_dir() and debugfs_create_file() returns NULL on error or a pointer on success. They do not return the error value with ERR_PTR. So we should not check the return with IS_ERR_OR_NULL, instead we should just check for NULL. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Marc Gonzalez authored
Drop raw_write return value (no longer used). Drop raw_read return value (for symmetry). Signed-off-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by:
-
Marc Gonzalez authored
Enable NAND_ECC_CUSTOM_PAGE_ACCESS in the tango NFC driver. Fixup the "raw" page accessors to send the proper NAND commands. Signed-off-by:
-
Marc Gonzalez authored
If your controller already sends the required NAND commands when reading or writing a page, then the framework is not supposed to send READ0 and SEQIN/PAGEPROG respectively. Signed-off-by:
-
Masahiro Yamada authored
Such debug lines might be useful when debugging the driver first, but should be deleted from the upstream code. Signed-off-by:
-
Masahiro Yamada authored
Remove parentheses surrounding the whole right side of an assignment. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The devm_request_irq() returns an appropriate error value when it fails. Use it instead of the fixed -ENODEV. While we are here, reword the comment to make it fit in a single line, fixing the misspelling of "initialization". Signed-off-by:
-
Masahiro Yamada authored
Use the managed variant instead of request_irq() and free_irq(). Signed-off-by:
-
Masahiro Yamada authored
The denali->blksperchip is set, but not referenced any more. The denali->totalblks is used only for calculating denali->blksperchip. Both of them are unneeded. Signed-off-by:
-
Masahiro Yamada authored
As far as I understood from the Kconfig menu deleted by commit be7f39c5 ("Staging: delete spectra driver"), the "Spectra" is specific to Intel Moorestown Platform. The Denali NAND controller IP is used for various SoCs such as Altera SOCFPGA, Socionext UniPhier, etc. The platform specific strings are not preferred in this driver. Signed-off-by:
-
Masahiro Yamada authored
The denali->fwblks is set by detect_partition_feature(), but it is not referenced from anywhere. That means the struct member fwblks and the whole of detect_partition_feature() are unneeded. The comment block implies this function is only for Intel platforms. I found drivers/staging/spectra used to exist, but it was deleted by commit be7f39c5 ("Staging: delete spectra driver") 5 years ago. So, I guess nobody would need this function any more. Signed-off-by:
-
Masahiro Yamada authored
The interrupt handler is setup in denali_init(), not in denali_drv_init(). This comment is false. Such a comment adds no value, so just delete it instead of move. Signed-off-by:
-
Masahiro Yamada authored
The struct member "idx" was used as an index for debug_array long ago, but the DEBUG_DENALI feature was removed by commit 7cfffac0 ("nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk"). Since then, this has been only initialized, but never referenced. Signed-off-by:
-
Masahiro Yamada authored
The driver calls devm_kzalloc()/devm_kfree() to allocate/free memory. They are declared in <linux/device.h>, not in <linux/slab.h>. Signed-off-by:
-
- 07 Nov, 2016 23 commits
-
-
Masahiro Yamada authored
For this driver, there is nothing between nand_scan_ident() and nand_scan_tail(). They can be merged into nand_scan(). Also, nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() never returns a positive value when it fails. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENODEV. (This driver is already doing so for nand_scan_tail().) Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENODEV. (This driver is already doing so for nand_scan_tail().) Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. (This driver is already doing so for nand_scan_tail().) Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENODEV. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan_ident/tail() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENODEV. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
The nand_scan() returns an appropriate error value when it fails. Use it instead of the fixed error code -ENXIO. Signed-off-by:
-
Masahiro Yamada authored
Since commit d1e1f4e4 ("mtd: nand: add support for reading ONFI parameters from NAND device"), the returned "type" is never used in nand_scan_ident(). Make nand_get_flash_type() simply return an integer value in order to avoid unnecessary ERR_PTR/PTR_ERR dance. Signed-off-by:
-
