- 13 Sep, 2023 5 commits
-
-
Pedro Tammela authored
As discussed in 'b80b829e', cls_route was handling the use of classid incorrectly. Add a test to check if it's conforming to the correct behaviour. Reviewed-by:
Victor Nogueira <victor@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
As discussed in '76e42ae8', cls_fw was handling the use of classid incorrectly. Add a few tests to check if it's conforming to the correct behaviour. Reviewed-by:
-
Andy Gospodarek authored
Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Pavan Chebbi pavan.chebbi@broadcom.com Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by:
Prashant Sreedharan <prashant.sreedharan@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Christophe JAILLET authored
Use devm_kasprintf() instead of hand writing it. This is less verbose and less error prone. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-09-11 (i40e, iavf) This series contains updates to i40e and iavf drivers. Andrii ensures all VSIs are cleaned up for remove in i40e. Brett reworks logic for setting promiscuous mode that can, currently, cause incorrect states on iavf. --- v2: - Remove redundant i40e_vsi_free_q_vectors() and kfree() calls (patch 1) v1: https://lore.kernel.org/netdev/20230905180521.887861-1-anthony.l.nguyen@intel.com/ ==================== Signed-off-by:
-
- 12 Sep, 2023 10 commits
-
-
Paolo Abeni authored
Eric Dumazet says: ==================== tcp: backlog processing optims First patches are mostly preparing the ground for the last one. Last patch of the series implements sort of ACK reduction only for the cases a TCP receiver is under high stress, which happens for high throughput flows. This gives us a ~20% increase of single TCP flow (100Gbit -> 120Gbit) ==================== Link: https://lore.kernel.org/r/20230911170531.828100-1-edumazet@google.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
This idea came after a particular workload requested the quickack attribute set on routes, and a performance drop was noticed for large bulk transfers. For high throughput flows, it is best to use one cpu running the user thread issuing socket system calls, and a separate cpu to process incoming packets from BH context. (With TSO/GRO, bottleneck is usually the 'user' cpu) Problem is the user thread can spend a lot of time while holding the socket lock, forcing BH handler to queue most of incoming packets in the socket backlog. Whenever the user thread releases the socket lock, it must first process all accumulated packets in the backlog, potentially adding latency spikes. Due to flood mitigation, having too many packets in the backlog increases chance of unexpected drops. Backlog processing unfortunately shifts a fair amount of cpu cycles from the BH cpu to the 'user' cpu, thus reducing max throughput. This patch takes advantage of the backlog processing, and the fact that ACK are mostly cumulative. The idea is to detect we are in the backlog processing and defer all eligible ACK into a single one, sent from tcp_release_cb(). This saves cpu cycles on both sides, and network resources. Performance of a single TCP flow on a 200Gbit NIC: - Throughput is increased by 20% (100Gbit -> 120Gbit). - Number of generated ACK per second shrinks from 240,000 to 40,000. - Number of backlog drops per second shrinks from 230 to 0. Benchmark context: - Regular netperf TCP_STREAM (no zerocopy) - Intel(R) Xeon(R) Platinum 8481C (Saphire Rapids) - MAX_SKB_FRAGS = 17 (~60KB per GRO packet) This feature is guarded by a new sysctl, and enabled by default: /proc/sys/net/ipv4/tcp_backlog_ack_defer Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Dave Taht <dave.taht@gmail.com> Signed-off-by:
-
Eric Dumazet authored
__sk_flush_backlog() / sk_flush_backlog() are used when TCP recvmsg()/sendmsg() process large chunks, to not let packets in the backlog too long. It makes sense to call tcp_release_cb() to also process actions held in sk->sk_tsq_flags for smoother scheduling. Signed-off-by:
-
Eric Dumazet authored
sock_release_ownership() should only be called by user owning the socket lock. After prior commit, we can remove one condition. Signed-off-by:
-
Eric Dumazet authored
This partially reverts c3f9b018 ("tcp: tcp_release_cb() should release socket ownership"). prequeue has been removed by Florian in commit e7942d06 ("tcp: remove prequeue support") __tcp_checksum_complete_user() being gone, we no longer have to release socket ownership in tcp_release_cb(). This is a prereq for third patch in the series ("net: call prot->release_cb() when processing backlog"). Signed-off-by:
-
Andy Shevchenko authored
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them. It is less verbose and it improves the type checking and semantic. While at it, add missing header inclusion (should be bitops.h, but with the above change it becomes bitmap.h). Reviewed-by:
Loic Poulain <loic.poulain@linaro.org> Reviewed-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230911131618.4159437-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Zhengchao Shao authored
Since commit 1202cdd6("Remove DECnet support from kernel") has been merged, all callers pass in the initial_ref value of 1 when they call dst_alloc(). Therefore, remove initial_ref when the dst_alloc() is declared and replace initial_ref with 1 in dst_alloc(). Also when all callers call dst_init(), the value of initial_ref is 1. Therefore, remove the input parameter initial_ref of the dst_init() and replace initial_ref with the value 1 in dst_init. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20230911125045.346390-1-shaozhengchao@huawei.comSigned-off-by:
-
Paolo Abeni authored
MD Danish Anwar says: ==================== Add support for ICSSG on AM64x EVM This series adds support for ICSSG driver on AM64x EVM. First patch of the series adds compatible for AM64x EVM in icssg-prueth dt binding. Second patch adds support for AM64x compatible in the ICSSG driver. This series addresses comments on [v1] (which was posted as RFC). This series is based on the latest net-next/main. This series has no dependency. Changes from v1 to v2: *) Made the compatible list in patch 1 alphanumerically ordered as asked by Krzysztof. *) Dropped the RFC tag. *) Added RB tags of Andrew and Roger. [v1] https://lore.kernel.org/all/20230830113724.1228624-1-danishanwar@ti.com/ ==================== Link: https://lore.kernel.org/r/20230911054308.2163076-1-danishanwar@ti.comSigned-off-by:
-
MD Danish Anwar authored
Add AM64x ICSSG support which is similar to am65x SR2.0, but required: - all ring configured in exposed ring mode - always fill both original and buffer fields in cppi5 desc Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Signed-off-by:
MD Danish Anwar <danishanwar@ti.com> Signed-off-by:
-
MD Danish Anwar authored
Add compatible for AM64x in icssg-prueth dt bindings. AM64x supports ICSSG similar to AM65x SR2.0. Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
- 11 Sep, 2023 19 commits
-
-
Brett Creeley authored
Currently when configuring promiscuous mode on the AVF we detect a change in the netdev->flags. We use IFF_PROMISC and IFF_ALLMULTI to determine whether or not we need to request/release promiscuous mode and/or multicast promiscuous mode. The problem is that the AQ calls for setting/clearing promiscuous/multicast mode are treated separately. This leads to a case where we can trigger two promiscuous mode AQ calls in a row with the incorrect state. To fix this make a few changes. Use IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE instead of the previous IAVF_FLAG_AQ_[REQUEST|RELEASE]_[PROMISC|ALLMULTI] flags. In iavf_set_rx_mode() detect if there is a change in the netdev->flags in comparison with adapter->flags and set the IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE aq_required bit. Then in iavf_process_aq_command() only check for IAVF_FLAG_CONFIGURE_PROMISC_MODE and call iavf_set_promiscuous() if it's set. In iavf_set_promiscuous() check again to see which (if any) promiscuous mode bits have changed when comparing the netdev->flags with the adapter->flags. Use this to set the flags which get sent to the PF driver. Add a spinlock that is used for updating current_netdev_promisc_flags and only allows one promiscuous mode AQ at a time. [1] Fixes the fact that we will only have one AQ call in the aq_required queue at any one time. [2] Streamlines the change in promiscuous mode to only set one AQ required bit. [3] This allows us to keep track of the current state of the flags and also makes it so we can take the most recent netdev->flags promiscuous mode state. [4] This fixes the problem where a change in the netdev->flags can cause IAVF_FLAG_AQ_CONFIGURE_PROMISC_MODE to be set in iavf_set_rx_mode(), but cleared in iavf_set_promiscuous() before the change is ever made via AQ call. Fixes: 47d34839 ("i40evf: Add driver support for promiscuous mode") Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Signed-off-by:
Ahmed Zaki <ahmed.zaki@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Andrii Staikov authored
Instead of freeing memory of a single VSI, make sure the memory for all VSIs is cleared before releasing VSIs. Add releasing of their resources in a loop with the iteration number equal to the number of allocated VSIs. Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
Andrii Staikov <andrii.staikov@intel.com> Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by:
-
Lorenzo Bianconi authored
MT7988 SoC support 3 NICs. Fix pse_port configuration in mtk_flow_set_output_device routine if the traffic is offloaded to eth2. Rely on mtk_pse_port definitions. Fixes: 88efedf5 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Daniel Golle authored
Variable dma_addr in function mtk_poll_rx can be uninitialized on some of the error paths. In practise this doesn't matter, even random data present in uninitialized stack memory can safely be used in the way it happens in the error path. However, in order to make Smatch happy make sure the variable is always initialized. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
-
Shigeru Yoshida authored
syzbot reported a memory leak like below: BUG: memory leak unreferenced object 0xffff88810b088c00 (size 240): comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s) hex dump (first 32 bytes): 00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634 [<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline] [<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815 [<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline] [<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748 [<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494 [<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548 [<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577 [<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append newly allocated skbs to 'head'. If some bytes are copied, an error occurred, and jumped to out_error label, 'last_skb' is left unmodified. A later kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the 'head' frag_list and causing the leak. This patch fixes this issue by properly updating the last allocated skb in 'last_skb'. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccbSigned-off-by:Shigeru Yoshida <syoshida@redhat.com> Signed-off-by:
-
Hayes Wang authored
According to the document of napi, there is no rx process when the budget is 0. Therefore, r8152_poll() has to return 0 directly when the budget is equal to 0. Fixes: d2187f8e ("r8152: divide the tx and rx bottom functions") Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA FDB regressions A report by Yanan Yang has prompted an investigation into the sja1105 driver's behavior w.r.t. multicast. The report states that when adding multicast L2 addresses with "bridge mdb add", only the most recently added address works - the others seem to be overwritten. This is solved by patch 3/5 (with patch 2/5 as a dependency for it). Patches 4/5 and 5/5 fix a series of race conditions introduced during the same patch set as the bug above, namely this one: https://patchwork.kernel.org/project/netdevbpf/cover/20211024171757.3753288-1-vladimir.oltean@nxp.com/ Finally, patch 1/5 fixes an issue found ever since the introduction of multicast forwarding offload in sja1105, which is that the multicast addresses are visible (with the "self" flag) in "bridge fdb show". ==================== Signed-off-by:
-
Vladimir Oltean authored
Currently, when we add the first sja1105 port to a bridge with vlan_filtering 1, then we sometimes see this output: sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2 It is because sja1105_fdb_add() runs from the dsa_owq which is no longer serialized with switch resets since it dropped the rtnl_lock() in the blamed commit. Either performing the FDB accesses before the reset, or after the reset, is equally fine, because sja1105_static_fdb_change() backs up those changes in the static config, but FDB access during reset isn't ok. Make sja1105_static_config_reload() take the fdb_lock to fix that. Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
sja1105_fdb_add() runs from the dsa_owq, and sja1105_port_mcast_flood() runs from switchdev_deferred_process_work(). Prior to the blamed commit, they used to be indirectly serialized through the rtnl_lock(), which no longer holds true because dsa_owq dropped that. So, it is now possible that we traverse the static config BLK_IDX_L2_LOOKUP elements concurrently compared to when we change them, in sja1105_static_fdb_change(). That is not ideal, since it might result in data corruption. Introduce a mutex which serializes accesses to the hardware FDB and to the static config elements for the L2 Address Lookup table. I can't find a good reason to add locking around sja1105_fdb_dump(). I'll add it later if needed. Fixes: 0faf890f ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by:
-
Vladimir Oltean authored
The commit cited in Fixes: did 2 things: it refactored the read-back polling from sja1105_dynamic_config_read() into a new function, sja1105_dynamic_config_wait_complete(), and it called that from sja1105_dynamic_config_write() too. What is problematic is the refactoring. The refactored code from sja1105_dynamic_config_poll_valid() works like the previous one, but the problem is that it uses another packed_buf[] SPI buffer, and there was code at the end of sja1105_dynamic_config_read() which was relying on the read-back packed_buf[]: /* Don't dereference possibly NULL pointer - maybe caller * only wanted to see whether the entry existed or not. */ if (entry) ops->entry_packing(packed_buf, entry, UNPACK); After the change, the packed_buf[] that this code sees is no longer the entry read back from hardware, but the original entry that the caller passed to the sja1105_dynamic_config_read(), packed into this buffer. This difference is the most notable with the SJA1105_SEARCH uses from sja1105pqrs_fdb_add() - used for both fdb and mdb. There, we have logic added by commit 728db843 ("net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a new address") to figure out whether the address we're trying to add matches on any existing hardware entry, with the exception of the catch-all multicast address. That logic was broken, because with sja1105_dynamic_config_read() not working properly, it doesn't return us the entry read back from hardware, but the entry that we passed to it. And, since for multicast, a match will always exist, it will tell us that any mdb entry already exists at index=0 L2 Address Lookup table. It is index=0 because the caller doesn't know the index - it wants to find it out, and sja1105_dynamic_config_read() does: if (index < 0) { // SJA1105_SEARCH /* Avoid copying a signed negative number to an u64 */ cmd.index = 0; // <- this cmd.search = true; } else { cmd.index = index; cmd.search = false; } So, to the caller of sja1105_dynamic_config_read(), the returned info looks entirely legit, and it will add all mdb entries to FDB index 0. There, they will always overwrite each other (not to mention, potentially they can also overwrite a pre-existing bridge fdb entry), and the user-visible impact will be that only the last mdb entry will be forwarded as it should. The others won't (will be flooded or dropped, depending on the egress flood settings). Fixing is a bit more complicated, and involves either passing the same packed_buf[] to sja1105_dynamic_config_wait_complete(), or moving all the extra processing on the packed_buf[] to sja1105_dynamic_config_wait_complete(). I've opted for the latter, because it makes sja1105_dynamic_config_wait_complete() a bit more self-contained. Fixes: df405910 ("net: dsa: sja1105: wait for dynamic config command completion on writes too") Reported-by:
Yanan Yang <yanan.yang@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
Currently, sja1105_dynamic_config_wait_complete() returns either 0 or -ETIMEDOUT, because it just looks at the read_poll_timeout() return code. There will be future changes which move some more checks to sja1105_dynamic_config_poll_valid(). It is important that we propagate their exact return code (-ENOENT, -EINVAL), because callers of sja1105_dynamic_config_read() depend on them. Signed-off-by:
-
Vladimir Oltean authored
Commit 4d942354 ("net: dsa: sja1105: offload bridge port flags to device") has partially hidden some multicast entries from showing up in the "bridge fdb show" output, but it wasn't enough. Addresses which are added through "bridge mdb add" still show up. Hide them all. Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by:
-
Ciprian Regus authored
Currently, when a new fdb entry is added (with both ports of the ADIN2111 bridged), the driver configures the MAC filters for the wrong port, which results in the forwarding being done by the host, and not actually hardware offloaded. The ADIN2111 offloads the forwarding by setting filters on the destination MAC address of incoming frames. Based on these, they may be routed to the other port. Thus, if a frame has to be forwarded from port 1 to port 2, the required configuration for the ADDR_FILT_UPRn register should set the APPLY2PORT1 bit (instead of APPLY2PORT2, as it's currently the case). Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
Ciprian Regus <ciprian.regus@analog.com> Reviewed-by:
-
Ziyang Xuan authored
Syzbot reports the following uninit-value access problem. ===================================================== BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 fill_frame_info net/hsr/hsr_forward.c:601 [inline] hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560 __dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:644 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 It is because VLAN not yet supported in hsr driver. Return error when protocol is ETH_P_8021Q in fill_frame_info() now to fix it. Fixes: 451d8123 ("net: prp: add packet handling support") Reported-by: syzbot+bf7e6250c7ce248f3ec9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=bf7e6250c7ce248f3ec9Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
-
David S. Miller authored
Hangyu Hua says: ==================== Fix possible OOB write when using rule_buf ADD bounds checks in bcmasp_netfilt_get_all_active and mvpp2_ethtool_get_rxnfc and mtk_hwlro_get_fdir_all when using rule_buf from ethtool_get_rxnfc. v2: [PATCH v2 1/3]: use -EMSGSIZE instead of truncating the list sliently. [PATCH v2 3/3]: drop the brackets. ==================== Signed-off-by: -
Hangyu Hua authored
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rule_locs to avoid NULL pointer dereference. Fixes: 7aab747e ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
-
Hangyu Hua authored
rules is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rules to avoid OOB writing or NULL pointer dereference. Fixes: 90b509b3 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Hangyu Hua authored
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by rule_cnt from user space. So rule_cnt needs to be check before using rule_locs to avoid OOB writing or NULL pointer dereference. Fixes: c5d511c4 ("net: bcmasp: Add support for wake on net filters") Signed-off-by:
-
Vincent Whitchurch authored
Setting ethtool -C eth0 tx-usecs 0 is supposed to disable the use of the coalescing timer but currently it gets programmed with zero delay instead. Disable the use of the coalescing timer if tx-usecs is zero by preventing it from being restarted. Note that to keep things simple we don't start/stop the timer when the coalescing settings are changed, but just let that happen on the next transmit or timer expiry. Fixes: 8fce3331 ("net: stmmac: Rework coalesce timer and fix multi-queue races") Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
-
- 10 Sep, 2023 6 commits
-
-
David S. Miller authored
Guangguan Wang says: ==================== Two fixes for SMC-R ==================== Signed-off-by: -
Guangguan Wang authored
While doing smcr_port_add, there maybe linkgroup add into or delete from smc_lgr_list.list at the same time, which may result kernel crash. So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add. The crash calltrace show below: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014 Workqueue: events smc_ib_port_event_work [smc] RIP: 0010:smcr_port_add+0xa6/0xf0 [smc] RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918 R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4 R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08 FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0 PKRU: 55555554 Call Trace: smc_ib_port_event_work+0x18f/0x380 [smc] process_one_work+0x19b/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x114/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x1f/0x30 Fixes: 1f90a05d ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by:
Guangguan Wang <guangguan.wang@linux.alibaba.com> Signed-off-by:
-
Guangguan Wang authored
In the macro SMC_STAT_SERV_SUCC_INC, the smcd_version is used to determin whether to increase the v1 statistic or the v2 statistic. It is correct for SMCD. But for SMCR, smcr_version should be used. Signed-off-by:
-
Ratheesh Kannoth authored
The access to page pool `cache' array and the `count' variable is not locked. Page pool cache access is fine as long as there is only one consumer per pool. octeontx2 driver fills in rx buffers from page pool in NAPI context. If system is stressed and could not allocate buffers, refiiling work will be delegated to a delayed workqueue. This means that there are two cosumers to the page pool cache. Either workqueue or IRQ/NAPI can be run on other CPU. This will lead to lock less access, hence corruption of cache pool indexes. To fix this issue, NAPI is rescheduled from workqueue context to refill rx buffers. Fixes: b2e3406a ("octeontx2-pf: Add support for page pool") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Reported-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
-
Jinjie Ruan authored
Inject fault When select CONFIG_VCAP_KUNIT_TEST, the below memory leak occurs. If kzalloc() for duprule succeeds, but the following kmemdup() fails, the duprule, ckf and caf memory will be leaked. So kfree them in the error path. unreferenced object 0xffff122744c50600 (size 192): comm "kunit_try_catch", pid 346, jiffies 4294896122 (age 911.812s) hex dump (first 32 bytes): 10 27 00 00 04 00 00 00 1e 00 00 00 2c 01 00 00 .'..........,... 00 00 00 00 00 00 00 00 18 06 c5 44 27 12 ff ff ...........D'... backtrace: [<00000000394b0db8>] __kmem_cache_alloc_node+0x274/0x2f8 [<0000000001bedc67>] kmalloc_trace+0x38/0x88 [<00000000b0612f98>] vcap_dup_rule+0x50/0x460 [<000000005d2d3aca>] vcap_add_rule+0x8cc/0x1038 [<00000000eef9d0f8>] test_vcap_xn_rule_creator.constprop.0.isra.0+0x238/0x494 [<00000000cbda607b>] vcap_api_rule_remove_in_front_test+0x1ac/0x698 [<00000000c8766299>] kunit_try_run_case+0xe0/0x20c [<00000000c4fe9186>] kunit_generic_run_threadfn_adapter+0x50/0x94 [<00000000f6864acf>] kthread+0x2e8/0x374 [<0000000022e639b3>] ret_from_fork+0x10/0x20 Fixes: 814e7693 ("net: microchip: vcap api: Add a storage state to a VCAP rule") Signed-off-by:Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by:
-
Julia Lawall authored
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. This was done using the Coccinelle semantic patch iterators/for_each_child.cocci Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by:
-
