Replace type field with match_flags.  Add rss_context and match values
covering of most of what is now in the MCDI protocol.

Change some fields into bitfields so that the structure size doesn't grow
beyond 64 bytes.

Ditch the filter decoding functions as it is now easier to pick apart
the abstract structure.

Rewrite ethtool NFC rule functions to set/get filter match flags and
values directly.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

The filter table(s) on EF10 are managed by firmware and will need
almost entirely separate code.  Rename the types and functions used
within the existing implementation.  The current definition of struct
efx_filter_spec is really implementation-specific, so we need to keep
it.  For now, define a separate structure for the internal
representation but leave them identical.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

efx_fini_eventq() needs to be idempotent but EF10 firmware is
picky about queue states.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

The workarounds that currently use EFX_WORKAROUND_ALWAYS are in
Falcon-specific or Falcon-arch-specific code, so get rid of the
conditions altogether.  Add/move comments as appropriate.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

EF10 functions don't have a fixed BAR size, and the minimum is not
large enough for all the queues we might want to allocate.  We have to
find out the BAR size at run-time, and therefore phys_addr_channels
and mem_map_size cannot be defined per-NIC-type.

Change efx_nic_type::mem_map_size to a function pointer which is
called to find the wanted memory map size (before probe).

Replace efx_nic_type::phys_addr_channels with efx_nic::max_channels,
to be initialised by the probe function.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

When we poll for MCDI request completion, we don't hold the interface
lock while setting the response fields in struct efx_mcdi_iface.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

MCDI v2 adds a second header dword with wider command and length
fields.  It also defines extra error codes.

Change the fallback error number for unknown MCDI error codes from EIO
to EPROTO.  EIO is treated as indicating the MCDI transport has failed
and we need to reset the function, which is rather drastic.

v2 error codes and lengths don't fit into completion events, so for a
v2-capable transport, always read the response header rather then
using the event fields.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

EF10 controllers do not have shared memory for communication with the
MC; instead it reads requests and writes responses in host memory,
which allows for longer messages.  It is also responsible for all
datapath control operations and hardware resource allocation, which
requires a large number of new commands and adds more possible error
cases.  MCDI v2 extends the message header to support this.

Update the MCDI protocol definition header to include v2 lengths,
errors and messages, and a few definitions specific to the
SFC9100 family (codenames Farmingdale and Huntington) which is
the first generation of EF10.

Some messages have been extended, so adjust the code accordingly:
- The request for MC_CMD_DRV_ATTACH now includes a datapath firmware
  ID.  This is ignored by Siena but we should fill it in anyway,
  initially always specifying low-latency datapath.
- The response for MC_CMD_GET_LOOPBACK_MODES now includes a 40G
  field.  Accept shorter responses that don't include it.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Currently we only translate error codes in efx_mcdi_poll(), but we
also need to do so in efx_mcdi_ev_cpl().

The reason we didn't notice before is that the MC firmware error codes
are mostly taken from Unix/Linux and no translation is necessary on
most architectures.  Make sure we notice any future failure by
changing the sign of resprc (matching the kernel convention) and BUG
if it's ever positive at command completion.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Add efx_nic_type operations for the many efx_nic functions that need
to be implemented different on EF10.  For now, change most of the
existing efx_nic_*() functions into inline wrappers.  As a later step,
we may be able to improve branch prediction for operations used on the
fast path by copying the pointers into each queue/channel structure.

Move the Falcon/Siena implementations to new file farch.c and rename
the functions and static data to use a prefix of 'efx_farch_'.

Move efx_may_push_tx_desc() to nic.h, as the EF10 TX code will also
use it.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Currently efx_stop_datapath() will try to flush our DMA queues (if DMA
is enabled), then finalise software and hardware state for each queue.
However, for EF10 we must ask the MC to finalise each queue, which
implicitly starts flushing it, and then wait for the flush events.
We therefore need to delegate more of this to the NIC type.

Combine all the hardware operations into a new NIC-type operation
efx_nic_type::fini_dmaq, and call this before tearing down the
software state and buffers for all the DMA queues.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

efx_unregister_netdev() should not call efx_release_tx_buffers()
directly, as it is already done when closing the device:
efx_net_stop() -> efx_stop_all() -> efx_stop_datapath() ->
efx_fini_tx_queue() -> efx_release_tx_buffers().

(This was presumably a workaround for a race between efx_stop_all()
and the data path that has since been properly fixed.)
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

rx_queue::enabled guards refill, so rename it to reflect that.  Clear
it at the start of the queue teardown process rather than waiting for
the RX queue to be flushed.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

We unconditionally acknowledge legacy interrupts just before disabling
them.  This workaround is needed on Falcon A1 but probably not on
later chips where the legacy interrupt mechanism is different.  It was
also originally done after the IRQ handler was removed, not before.
Restore the original behaviour for Falcon A1 only by doing this
acknowledgement in the efx_nic_type::fini operation.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

There are many problems with the current efx_stop_interrupts() and
efx_start_interrupts():

1. On Siena, it is unsafe to disable the master IRQ enable bit
(DRV_INT_EN_KER) while any IRQ sources are enabled.

2. On EF10 there is no master IRQ enable bit, so we cannot expect to
defer IRQs without tearing down event queues.  (Though I don't think
we will need to keep any event queues around while the device is down,
as we do for VFDI on Siena.)

3. synchronize_irq() only waits for a running IRQ handler to finish,
not for any propagation through IRQ controllers.  Therefore an IRQ may
still be received and handled after efx_stop_interrupts() returns.
IRQ handlers can then race with channel reallocation.

To fix this:

a. Introduce a software IRQ enable flag.  So long as this is clear,
IRQ handlers will only acknowledge IRQs and not touch the channel
structures.

b. Define a new struct efx_msi_context as the context for MSIs.  This
is never reallocated and is sufficient to find the software enable
flag and the channel structure.  It also includes the channel/IRQ
name, which was previously separated out as it must also not be
reallocated.

c. Split efx_{start,stop}_interrupts() into
efx_{,soft_}_{enable,disable}_interrupts().  The 'soft' functions
don't touch the hardware master enable flag (if it exists) and don't
reinitialise or tear down channels with the keep_eventq flag set.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

efx_process_channel_now() is unneeded since self-tests can rely on
normal NAPI polling.  Remove it and all calls to it.

efx_channel::work_pending and efx_channel_processed() are also
unneeded (the latter being the same as efx_nic_eventq_read_ack()).
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

The EF10 architecture has a very different register layout from
previous controllers, so we'll use separate files for the two sets of
register definitions.  Use 'farch' as an abbreviation for
Falcon-architecture.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

On EF10, the firmware is in charge of allocating buffer table entries.
Change struct efx_special_buffer to use a struct efx_buffer member,
so that it can be used with efx_nic_{alloc,free}_buffer() in that
case.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Most call sites for efx_nic_alloc_buffer() are part of the probe or
reconfiguration paths and can allocate with GFP_KERNEL.  A few others
should use GFP_NOIO (I think).  Only one is in atomic context and
must use the current GFP_ATOMIC.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Move the lowest layer (transport) of the current MCDI code to
per-NIC-type operations.

Introduce a new structure and efx_nic member for MCDI-specific data.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

This should probably be done during MCDI initialisation for any NIC.
Change efx_mcdi_init() to return an error code.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Collect together MCDI port functions from mcdi.c, mcdi_mac.c,
mcdi_phy.c and siena.c.  Rename the 'siena' functions accordingly.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

EF10 does not include a multicast hash filter, so this function is
specific to Siena.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

These implementations should work for EF10 too.  Rename them
accordingly.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

No need to keep open-coding the assignment of high and low dwords.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

We currently require that MCDI request and response lengths are
multiples of 4 bytes, because we will copy dwords in and out of shared
memory and we want to be sure we won't read or write out of bounds.
But all we really need to know is that there is sufficient padding for
that.  Also, we should ensure that buffers are dword-aligned, as on
some architectures misaligned access will result in data corruption or
a crash.

Change the buffer type to array-of-efx_dword_t and remove the
requirement that the lengths are multiples of 4.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

A few functions are using heap buffers; change them to use stack
buffers as we really don't need to resort to the heap for a 252
byte buffer in process context.

MC_CMD_MEMCPY is quite weird in that it can use inline data placed in
the request buffer after the array of records.  Thus there are two
variable-length arrays and we can't use the normal accessors for
the second.  So we have to use _MCDI_PTR() in efx_sriov_memcpy().
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

The MCDI version 2 protocol supports larger payloads, but will
not be implemented on Siena.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

We need to access arrays of 16-bit words and 32-bit dwords in MCDI
buffers based on the MCDI protocol definitions.

We should also be able to read and write fields within structures,
without specifying an array index each time.  So add MCDI_FIELD()
and make MCDI_ARRAY_FIELD() use it.  Also add MCDI_SET_FIELD().

Split MCDI_ARRAY_PTR() into MCDI_ARRAY_STRUCT_PTR() and
_MCDI_ARRAY_PTR(), which are currently identical but will diverge in
later changes.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Add _MCDI_DWORD() which yields an lvalue for the given dword field
and change MCDI_DWORD(), MCDI_SET_DWORD() and MCDI_QWORD() to use it.

Fold the rather trivial MCDI_PTR2() into MCDI_PTR() and _MCDI_DWORD().

Remove MCDI_SET_DWORD2() and MCDI_QWORD2().  MCDI_DWORD2() should also
go, but it still has one user which we'll get rid of later.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

MCDI_DECLARE_BUF declares a variable as an MCDI buffer of the
requested length, adding any necessary padding.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

In particular, fold in the whole of falcon_xmac.c.

Drop some entirely unused definitions.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

This needs to be done before we separate MCDI from siena_nic_data.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Merge sfc fixes destined for 3.11 so we can avoid conflicts with
development for 3.12+.

commit 385904f8 ('sfc: Don't use
efx_filter_{build,hash,increment}() for default MAC filters') used the
wrong name to find the index of default RX MAC filters at insertion/
update time.  This could result in memory corruption and would in any
case silently fail to update the filter.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>