- 27 Jun, 2024 1 commit
-
-
Thomas Bogendoerfer authored
-
- 21 Jun, 2024 12 commits
-
-
Jiaxun Yang authored
Somehow those enablement bits were left over when we were adding initial Loongson-2K support. Set up basic information and select proper builtin DTB for Loongson-2K. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Some firmware implementations require restoring ra and sp to be passed as arguments. Passing them as necessary. Fixes: 68557c59 ("MIPS: Loongson64: Implement PM suspend for LEFI firmware") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
We should always use firmware's poweroff & reboot service if it's available as firmware may need to perform more task than platform's syscon etc. However _machine_restart & poweroff hooks are registered at low priority, which means platform reboot driver can override them. Register firmware based reboot/poweroff implementation with register_sys_off_handler with appropriate priority so that they will be prioritised. Remove _machine_halt hook as it's deemed to be unnecessary. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
cpu_hwmon is unsupported on CPUs without loongson_chiptemp register and csr. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Some global register address variable may be missing on specific CPU type, test them before use them. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
ISA node is required by Loongson64 platforms to initialize PIO support. Kernel will hang at boot without ISA node. Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
phy-mode should be rgmii-id to match hardware configuration. Also there should be a phy-handle to reference phy node. Fixes: f8a11425 ("MIPS: Loongson64: Add GMAC support for Loongson-2K1000") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
The correct interrupt line for RTC is line 8 on liointc1. Fixes: e47084e1 ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
All internal liointc interrupts are high level triggered. Fixes: b1a79260 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Builtin DTBS should never contain memory node as memory is going to be managed by LEFI interface. Remove memory node to prevent confliction. Fixes: b1a79260 ("MIPS: Loongson64: DeviceTree for Loongson-2K1000") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Arnd Bergmann authored
This is almost compatible, but passing a negative offset should result in a EINVAL error, but on mips o32 compat mode would seek to a large 32-bit byte offset. Use compat_sys_lseek() to correctly sign-extend the argument. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Target register of mftc0 should be __res instead of $1, this is a leftover from old .insn code. Fixes: dd6d29a6 ("MIPS: Implement microMIPS MT ASE helpers") Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 19 Jun, 2024 2 commits
-
-
Jeff Johnson authored
With ARCH=mips, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in arch/mips/crypto/poly1305-mips.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Include linux/processor.h to fix build error: arch/mips/sgi-ip30/ip30-console.c: In function ‘prom_putchar’: arch/mips/sgi-ip30/ip30-console.c:21:17: error: implicit declaration of function ‘cpu_relax’ [-Werror=implicit-function-declaration] 21 | cpu_relax(); Cc: stable@vger.kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 13 Jun, 2024 1 commit
-
-
Thomas Bogendoerfer authored
This reverts commit 277a0363. While fixing old boards with broken DTs, this change will break newer ones with correct gpio polarity annotation. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 11 Jun, 2024 18 commits
-
-
Christian Marangi authored
It was discovered that some device have CBR address set to 0 causing kernel panic when arch_sync_dma_for_cpu_all is called. This was notice in situation where the system is booted from TP1 and BMIPS_GET_CBR() returns 0 instead of a valid address and !!(read_c0_brcm_cmt_local() & (1 << 31)); not failing. The current check whether RAC flush should be disabled or not are not enough hence lets check if CBR is a valid address or not. Fixes: ab327f8a ("mips: bmips: BCM6358: disable RAC flush for TP1") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Martin Schiller authored
Commit 90c2d2eb ("MIPS: pci: lantiq: switch to using gpiod API") not only switched to the gpiod API, but also inverted / changed the polarity of the GPIO. According to the PCI specification, the RST# pin is an active-low signal. However, most of the device trees that have been widely used for a long time (mainly in the openWrt project) define this GPIO as active-high and the old driver code inverted the signal internally. Apparently there are actually boards where the reset gpio must be operated inverted. For this reason, we cannot use the GPIOD_OUT_LOW/HIGH flag for initialization. Instead, we must explicitly set the gpio to value 1 in order to take into account any "GPIO_ACTIVE_LOW" flag that may have been set. In order to remain compatible with all these existing device trees, we should therefore keep the logic as it was before the commit. Fixes: 90c2d2eb ("MIPS: pci: lantiq: switch to using gpiod API") Cc: stable@vger.kernel.org Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Ilpo Järvinen authored
read_config_dword() contains strange condition checking ret for a number of values. The ret variable, however, is always zero because config_access() never returns anything else. Thus, the retry is always taken until number of tries is exceeded. The code looks like it wants to check *val instead of ret to see if the read gave an error response. Fixes: 73b4390f ("[MIPS] Routerboard 532: Support for base system") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Genjian Zhang authored
These functions are used in only one file. Made them static to fix the following build error: arch/mips/sgi-ip22/ip22-gio.c:249:6: error: no previous prototype for ‘ip22_gio_set_64bit’ [-Werror=missing-prototypes] arch/mips/sgi-ip22/ip22-gio.c:398:12: error: no previous prototype for ‘ip22_gio_init’ [-Werror=missing-prototypes] Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Genjian Zhang authored
This fixes the following build warning: arch/mips/sgi-ip22/ip22-time.c:119:18: error: no previous prototype for ‘indy_8254timer_irq’ [-Werror=missing-prototypes] arch/mips/sgi-ip22/ip22-berr.c:89:6: error: no previous prototype for ‘ip22_be_interrupt’ [-Werror=missing-prototypes] arch/mips/sgi-ip22/ip22-berr.c:113:13: error: no previous prototype for ‘ip22_be_init’ [-Werror=missing-prototypes] Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Add various required properties to silent warnings: arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi:116.16-297.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64_2core_2k1000.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Add it to silent warning: arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts:32.31-40.4: Warning (interrupt_provider): /bus@10000000/msi-controller@2ff00000: Missing '#interrupt-cells' in interrupt provider arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider' Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
dma.c defined function plat_swiotlb_setup, which is declared in bootinfo.h. Fixes warning: arch/mips/loongson64/dma.c:25:13: warning: no previous prototype for ‘plat_swiotlb_setup’ [-Wmissing-prototypes] 25 | void __init plat_swiotlb_setup(void) | ^~~~~~~~~~~~~~~~~~ Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Declear prototype for kvm_init_loongson_ipi in interrupt.h. Fix warning: arch/mips/kvm/loongson_ipi.c:190:6: warning: no previous prototype for ‘kvm_init_loongson_ipi’ [-Wmissing-prototypes] 190 | void kvm_init_loongson_ipi(struct kvm *kvm) | ^~~~~~~~~~~~~~~~~~~~~ Fixes: f21db309 ("KVM: MIPS: Add Loongson-3 Virtual IPI interrupt support") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Implement PM suspend for LEFI firmware. Entering STR (Suspend to RAM) is as simple as save our context then go to a firmware vector. Wake is a little bit treaky as we need to setup some CP0 status first, which can be done with smp_slave_setup. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Functionalities provided by CPU_PM are essential for suspend to work on all platforms. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Jiaxun Yang authored
Use platform agnostic macros so it can be compiled on all MIPS platforms. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Maxime Ripard authored
Commit 4fc8cb47 ("drm/display: Move HDMI helpers into display-helper module") turned the DRM_DW_HDMI dependency of DRM_INGENIC_DW_HDMI into a depends on which ended up disabling the drivers in the defconfig. Make sure it's still enabled. Fixes: 4fc8cb47 ("drm/display: Move HDMI helpers into display-helper module") Reported-by: Mark Brown <broonie@kernel.org> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Gregory CLEMENT authored
EyeQ6H (or “High”) is an other SoC from Mobileye still based on the MIPS I6500 architecture as the EyeQ5. The 2 clusters of this SoC contains 4 cores which are capable of running 4 threads. Besides this, it features multiple controllers such as the classic UART, high speed I2C, SPI, as well as CAN-FD, PCIe Gen4, Octal/Quad SPI Flash interface, Gigabit Ethernet, MIPI CSI-2, MIPI DSI, and eMMC 5.1. It also includes a Hardware Security Module, Functional Safety Hardware, and video encoders and more. This commit provides the infrastructure to build a kernel running on EyeQ6H SoC. For now the support is limited and only one CPU core is running. Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Gregory CLEMENT authored
EyeQ6H (or “High”) is an other SoC from Mobileye still based on the MIPS I6500 architecture as the EyeQ5. The 2 clusters of this SoC contains 4 cores which are capable of running 4 threads. Besides this, it features multiple controllers such as the classic UART, high speed I2C, SPI, as well as CAN-FD, PCIe Gen4, Octal/Quad SPI Flash interface, Gigabit Ethernet, MIPI CSI-2, MIPI DSI, and eMMC 5.1. It also includes a Hardware Security Module, Functional Safety Hardware, and video encoders and more. This commit provides the initial device tree files with support for UART, GPIO and pinctrl, as well as fixed clocked. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Gregory CLEMENT authored
Add the yaml bindings for a new Mobileye SoC: EyeQ6H. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Celeste Liu authored
For cgroup v1, if turned on, and there's any cgroup in the "cpu" hierarchy it needs an RT budget assigned, otherwise the processes in it will not be able to get RT at all. The problem with RT group scheduling is that it requires the budget assigned but there's no way we could assign a default budget, since the values to assign are both upper and lower time limits, are absolute, and need to be sum up to < 1 for each individal cgroup. That means we cannot really come up with values that would work by default in the general case.[1] For cgroup v2, it's almost unusable as well. If it turned on, the cpu controller can only be enabled when all RT processes are in the root cgroup. But it will lose the benefits of cgroup v2 if all RT process were placed in the same cgroup. Red Hat, Gentoo, Arch Linux and Debian all disable it. systemd also doesn't support it.[2] [1]: https://bugzilla.redhat.com/show_bug.cgi?id=1229700 [2]: https://github.com/systemd/systemd/issues/13781#issuecomment-549164383Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Andy Shevchenko authored
Let the kememdup_array() take care about multiplication and possible overflows. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 09 Jun, 2024 5 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Update copies of kernel headers, which resulted in support for the new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector, 'map_shadow_stack' syscall for x86-32. - Revert perf.data record memory allocation optimization that ended up causing a regression, work is being done to re-introduce it in the next merge window. - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when interrupting the build. * tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event" tools headers arm64: Sync arm64's cputype.h with the kernel sources tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL tools headers UAPI: Update i915_drm.h with the kernel sources tools headers UAPI: Sync kvm headers with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION perf beauty: Update copy of linux/socket.h with the kernel sources tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync linux/stat.h with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Convert PCI core error codes to proper error numbers since latter get propagated all the way up to the module loading functions * tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/igen6: Convert PCIBIOS_* return codes to errnos EDAC/amd64: Convert PCIBIOS_* return codes to errnos
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One fix for the SiFive PRCI clocks so that the device boots again. This driver was registering clkdev lookups that were always going to be useless. This wasn't a problem until clkdev started returning an error in these cases, causing this driver to fail probe, and thus boot to fail because clks are essential for most drivers. The fix is simple, don't use clkdev because this is a DT based system where clkdev isn't used" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sifive: Do not register clkdevs for PRCI clocks
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Two small smb3 client fixes: - fix deadlock in umount - minor cleanup due to netfs change" * tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Don't advance the I/O iterator before terminating subrequest smb: client: fix deadlock in smb2_find_smb_tcon()
-
- 08 Jun, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fix potential read out of bounds in hid-asus (Andrew Ballance) - fix endian-conversion on little endian systems in intel-ish-hid (Arnd Bergmann) - A couple of new input event codes (Aseda Aboagye) - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo (Christophe JAILLET), hid-logitech-dj (José Expósito) - current leakage fix while the device is in suspend on a i2c-hid laptop (Johan Hovold) - other assorted smaller fixes and device ID / quirk entry additions * tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreens 2F2C and 4116 HID: i2c-hid: elan: fix reset suspend current leakage dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema input: Add support for "Do Not Disturb" input: Add event code for accessibility key hid: asus: asus_report_fixup: fix potential read out of bounds HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro HID: intel-ish-hid: fix endian-conversion HID: nintendo: Fix an error handling path in nintendo_hid_probe() HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode() HID: core: remove unnecessary WARN_ON() in implement() HID: nvidia-shield: Add missing check for input_ff_create_memless HID: intel-ish-hid: Fix build error for COMPILE_TEST
-