- 08 May, 2017 12 commits
-
-
Theodore Ts'o authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit 28b4c263 upstream. Add a validation check for dentries for encrypted directory to make sure we're not caching stale data after a key has been added or removed. Also check to make sure that status of the encryption key is updated when readdir(2) is executed. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
-
Richard Weinberger authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit 9a200d07 upstream. ...otherwise an user can enable encryption for certain files even when the filesystem is unable to support it. Such a case would be a filesystem created by mkfs.ext4's default settings, 1KiB block size. Ext4 supports encyption only when block size is equal to PAGE_SIZE. But this constraint is only checked when the encryption feature flag is set. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1689296 The driver causes two warnings about possibly uninitialized variables: drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf': drivers/infiniband/hw/ehca/ehca_mrmw.c:1908:4: warning: 'prev_pgaddr' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/infiniband/hw/ehca/ehca_mrmw.c:1924:14: note: 'prev_pgaddr' was declared here drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_reg_mr': drivers/infiniband/hw/ehca/ehca_mrmw.c:2430:5: warning: 'hret' may be used uninitialized in this function [-Wmaybe-uninitialized] The first one is definitely a false positive, the second one may or may not be one. In both cases, adding an intialization is the safe and easy workaround. The driver was removed in mainline in commit e581d111 ("staging/rdma: remove deprecated ehca driver"), in linux-4.6. In 4.4, the file is located in drivers/staging/rdma/ehca/ehca_mrmw.c, and the fix still applies. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1689296 We get this build warning on arm64 drivers/infiniband/hw/qib/qib_qp.c:44:0: error: "BITS_PER_PAGE" redefined [-Werror] #define BITS_PER_PAGE (PAGE_SIZE*BITS_PER_BYTE) This is fixed upstream in commit 898fa52b ("IB/qib: Remove qpn, qp tables and related variables from qib"), which does a lot of other things as well. Instead, I just backport the rename of the local BITS_PER_PAGE definition to RVT_BITS_PER_PAGE. The driver first showed up in linux-2.6.35, and the fixup should still apply to that. The upstream fix went into v4.6, so we could apply this workaround to both 3.18 and 4.4. Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Signed-off-by:
-
Ross Lagerwall authored
BugLink: http://bugs.launchpad.net/bugs/1689296 The backport of d35c99ff ("netlink: do not enter direct reclaim from netlink_dump()") to the 4.4 branch (first in 4.4.32) mistakenly removed direct claim from the initial large allocation _and_ the fallback allocation which means that allocations can spuriously fail. Fix the issue by adding back the direct reclaim flag to the fallback allocation. Fixes: 6d123f1d ("netlink: do not enter direct reclaim from netlink_dump()") Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit e434e041 upstream. The tg3_set_eeprom() function correctly initializes the 'start' variable, but gcc generates a false warning: drivers/net/ethernet/broadcom/tg3.c: In function 'tg3_set_eeprom': drivers/net/ethernet/broadcom/tg3.c:12057:4: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] I have not come up with a way to restructure the code in a way that avoids the warning without making it less readable, so this adds an initialization for the declaration to shut up that warning. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit fddcca51 upstream. When map_word gets too large, we use a lot of kernel stack, and for MTD_MAP_BANK_WIDTH_32, this means we use more than the recommended 1024 bytes in a number of functions: drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_write_buffers': drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0020.c: In function 'cfi_staa_erase_varsize': drivers/mtd/chips/cfi_cmdset_0020.c:972:1: warning: the frame size of 1208 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/mtd/chips/cfi_cmdset_0001.c: In function 'do_write_buffer': drivers/mtd/chips/cfi_cmdset_0001.c:1835:1: warning: the frame size of 1240 bytes is larger than 1024 bytes [-Wframe-larger-than=] This can be avoided if all operations on the map word are done indirectly and the stack gets reused between the calls. We can mostly achieve this by selecting MTD_COMPLEX_MAPPINGS whenever MTD_MAP_BANK_WIDTH_32 is set, but for the case that no other bank width is enabled, we also need to use a non-constant map_bankwidth() to convince the compiler to use less stack. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Lars Ellenberg authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit 2630628b upstream. Apparently we now implicitly get definitions for BITS_PER_PAGE and BITS_PER_PAGE_MASK from the pid_namespace.h Instead of renaming our defines, I chose to define only if not yet defined, but to double check the value if already defined. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit b268c34e upstream. The awacs sound driver produces a false-positive warning in ppc64_defconfig: sound/ppc/awacs.c: In function 'snd_pmac_awacs_init': include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] I haven't come up with a good way to rewrite the code to avoid the warning, so here is a bad one: I initialize the variable before the conditionall initialization so gcc no longer has to worry about it. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit 6e4cac23 upstream. The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry the ignore_suspend flag, and this prevents the suspend/resume working properly while the stream is running, since SST core code has the check of the running streams and returns -EBUSY. Drop these superfluous flags for fixing the behavior. Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE definitions, which leads to the kernel Oops at suspend/resume like: BUG: scheduling while atomic: systemd-sleep/3144/0x00000003 Call Trace: dump_stack+0x5c/0x7a __schedule_bug+0x55/0x70 __schedule+0x63c/0x8c0 schedule+0x3d/0x90 schedule_timeout+0x16b/0x320 ? del_timer_sync+0x50/0x50 ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? remove_wait_queue+0x60/0x60 ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core] ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core] .... This patch addresses these appropriately, too. [tiwai: applied only to bytcr_rt5640 as bytcr_rt5651 isn't present in 4.4.x yet] Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
-
Sachin Prabhu authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit 38bd4906 upstream. A signal can interrupt a SendReceive call which result in incoming responses to the call being ignored. This is a problem for calls such as open which results in the successful response being ignored. This results in an open file resource on the server. The patch looks into responses which were cancelled after being sent and in case of successful open closes the open fids. For this patch, the check is only done in SendReceive2() RH-bz: 1403319 Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Acked-by:
-
Thomas Gleixner authored
BugLink: http://bugs.launchpad.net/bugs/1689296 commit 1e38da30 upstream. The handling of the might_cancel queueing is not properly protected, so parallel operations on the file descriptor can race with each other and lead to list corruptions or use after free. Protect the context for these operations with a seperate lock. The wait queue lock cannot be reused for this because that would create a lock inversion scenario vs. the cancel lock. Replacing might_cancel with an atomic (atomic_t or atomic bit) does not help either because it still can race vs. the actual list operation. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "linux-fsdevel@vger.kernel.org" Cc: syzkaller <syzkaller@googlegroups.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311521430.3457@nanosSigned-off-by:
-
- 05 May, 2017 28 commits
-
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1686061 The low-level resume-from-hibernation code on x86-64 uses kernel_ident_mapping_init() to create the temoprary identity mapping, but that function assumes that the offset between kernel virtual addresses and physical addresses is aligned on the PGD level. However, with a randomized identity mapping base, it may be aligned on the PUD level and if that happens, the temporary identity mapping created by set_up_temporary_mappings() will not reflect the actual kernel identity mapping and the image restoration will fail as a result (leading to a kernel panic most of the time). To fix this problem, rework kernel_ident_mapping_init() to support unaligned offsets between KVA and PA up to the PMD level and make set_up_temporary_mappings() use it as approprtiate. Reported-and-tested-by:
Thomas Garnier <thgarnie@google.com> Reported-by:
Borislav Petkov <bp@suse.de> Suggested-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Yinghai Lu authored
BugLink: https://bugs.launchpad.net/bugs/1686061 In order to support on-demand page table creation when moving the kernel for KASLR, we need to use kernel_ident_mapping_init() in the decompression code. This splits it out into its own file for use outside of init_64.c. Additionally, checking for __pa/__va defines is added since they need to be overridden in the decompression code. [kees: rewrote changelog] Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: kernel-hardening@lists.openwall.com Cc: lasse.collin@tukaani.org Link: http://lkml.kernel.org/r/1462572095-11754-3-git-send-email-keescook@chromium.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> (cherry picked from commit cf4fb15b) Signed-off-by:
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1686061 On Intel hardware, native_play_dead() uses mwait_play_dead() by default and only falls back to the other methods if that fails. That also happens during resume from hibernation, when the restore (boot) kernel runs disable_nonboot_cpus() to take all of the CPUs except for the boot one offline. However, that is problematic, because the address passed to __monitor() in mwait_play_dead() is likely to be written to in the last phase of hibernate image restoration and that causes the "dead" CPU to start executing instructions again. Unfortunately, the page containing the address in that CPU's instruction pointer may not be valid any more at that point. First, that page may have been overwritten with image kernel memory contents already, so the instructions the CPU attempts to execute may simply be invalid. Second, the page tables previously used by that CPU may have been overwritten by image kernel memory contents, so the address in its instruction pointer is impossible to resolve then. A report from Varun Koyyalagunta and investigation carried out by Chen Yu show that the latter sometimes happens in practice. To prevent it from happening, temporarily change the smp_ops.play_dead pointer during resume from hibernation so that it points to a special "play dead" routine which uses hlt_play_dead() and avoids the inadvertent "revivals" of "dead" CPUs this way. A slightly unpleasant consequence of this change is that if the system is hibernated with one or more CPUs offline, it will generally draw more power after resume than it did before hibernation, because the physical state entered by CPUs via hlt_play_dead() is higher-power than the mwait_play_dead() one in the majority of cases. It is possible to work around this, but it is unclear how much of a problem that's going to be in practice, so the workaround will be implemented later if it turns out to be necessary. Link: https://bugzilla.kernel.org/show_bug.cgi?id=106371Reported-by:
Varun Koyyalagunta <cpudebug@centtech.com> Original-by:
Chen Yu <yu.c.chen@intel.com> Tested-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1688505Signed-off-by:
-
Josh Poimboeuf authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit 34a477e5 upstream. On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function graph tracing and then suspend to RAM, it will triple fault and reboot when it resumes. The first fault happens when booting a secondary CPU: startup_32_smp() load_ucode_ap() prepare_ftrace_return() ftrace_graph_is_dead() (accesses 'kill_ftrace_graph') The early head_32.S code calls into load_ucode_ap(), which has an an ftrace hook, so it calls prepare_ftrace_return(), which calls ftrace_graph_is_dead(), which tries to access the global 'kill_ftrace_graph' variable with a virtual address, causing a fault because the CPU is still in real mode. The fix is to add a check in prepare_ftrace_return() to make sure it's running in protected mode before continuing. The check makes sure the stack pointer is a virtual kernel address. It's a bit of a hack, but it's not very intrusive and it works well enough. For reference, here are a few other (more difficult) ways this could have potentially been fixed: - Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging is enabled. (No idea what that would break.) - Track down load_ucode_ap()'s entire callee tree and mark all the functions 'notrace'. (Probably not realistic.) - Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu() or __cpu_up(), and ensure that the pause facility can be queried from real mode. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.comSigned-off-by:
-
Vineet Gupta authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit ecd43afd upstream. This is not exposed to userspace debugers yet, which can be done independently as a seperate patch ! Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
J. Bruce Fields authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit e6838a29 upstream. A client can append random data to the end of an NFSv2 or NFSv3 RPC call without our complaining; we'll just stop parsing at the end of the expected data and ignore the rest. Encoded arguments and replies are stored together in an array of pages, and if a call is too large it could leave inadequate space for the reply. This is normally OK because NFS RPC's typically have either short arguments and long replies (like READ) or long arguments and short replies (like WRITE). But a client that sends an incorrectly long reply can violate those assumptions. This was observed to cause crashes. Also, several operations increment rq_next_page in the decode routine before checking the argument size, which can leave rq_next_page pointing well past the end of the page array, causing trouble later in svc_free_pages. So, following a suggestion from Neil Brown, add a central check to enforce our expectation that no NFSv2/v3 call has both a large call and a large reply. As followup we may also want to rewrite the encoding routines to check more carefully that they aren't running off the end of the page array. We may also consider rejecting calls that have any extra garbage appended. That would be safer, and within our rights by spec, but given the age of our server and the NFS protocol, and the fact that we've never enforced this before, we may need to balance that against the possibility of breaking some oddball client. Reported-by:
Tuomas Haanpää <thaan@synopsys.com> Reported-by:
Ari Kauppi <ari@synopsys.com> Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Dmitry Torokhov authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit 7c5bb4ac upstream. Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by:
Paweł Bylica <chfast@gmail.com> Tested-by:
Ed Bordin <edbordin@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Al Viro authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit 71d6ad08 upstream. Don't assume that server is sane and won't return more data than asked for. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Cowgill authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit c46f59e9 upstream. arch_check_elf contains a usage of current_cpu_data that will call smp_processor_id() with preemption enabled and therefore triggers a "BUG: using smp_processor_id() in preemptible" warning when an fpxx executable is loaded. As a follow-up to commit b244614a ("MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by using raw_current_cpu_data instead. The rationale quoted from the previous commit: "It is assumed throughout the kernel that if any CPU has an FPU, then all CPUs would have an FPU as well, so it is safe to perform the check with preemption enabled - change the code to use raw_ variant of the check to avoid the warning." Fixes: 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") Signed-off-by:
James Cowgill <James.Cowgill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15951/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
James Hogan authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit 162b270c upstream. KGDB is a kernel debug stub and it can't be used to debug userland as it can only safely access kernel memory. On MIPS however KGDB has always got the register state of sleeping processes from the userland register context at the beginning of the kernel stack. This is meaningless for kernel threads (which never enter userland), and for user threads it prevents the user seeing what it is doing while in the kernel: (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () 2 Thread 1 (init) 0x000000007705c4b4 in ?? () 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Get the register state instead from the (partial) kernel register context stored in the task's thread_struct for resume() to restore. All threads now correctly appear to be in context_switch(): (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 2 Thread 1 (init) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Call clobbered registers which aren't saved and exception registers (BadVAddr & Cause) which can't be easily determined without stack unwinding are reported as 0. The PC is taken from the return address, such that the state presented matches that found immediately after returning from resume(). Fixes: 88547001 ("[MIPS] kgdb: add arch support for the kernel's kgdb core") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15829/Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit 4e7655fd upstream. The snd_use_lock_sync() (thus its implementation snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of the sync loop. It was introduced from the beginning, just to be "safer", in terms of avoiding the stupid bugs. However, as Ben Hutchings suggested, this timeout rather introduces a potential leak or use-after-free that was apparently fixed by the commit 2d7d5400 ("ALSA: seq: Fix race during FIFO resize"): for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() -> copy_from_user() could block for a long time, and snd_use_lock_sync() goes timeout and still leaves the cell at releasing the pool. For fixing such a problem, we remove the break by the timeout while still keeping the warning. Suggested-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Takashi Sakamoto authored
BugLink: http://bugs.launchpad.net/bugs/1688505 commit dfb00a56 upstream. An abstraction of asynchronous transaction for transmission of MIDI messages was introduced in Linux v4.4. Each driver can utilize this abstraction to transfer MIDI messages via fixed-length payload of transaction to a certain unit address. Filling payload of the transaction is done by callback. In this callback, each driver can return negative error code, however current implementation assigns the return value to unsigned variable. This commit changes type of the variable to fix the bug. Reported-by:
Julia Lawall <Julia.Lawall@lip6.fr> Fixes: 585d7cba ("ALSA: firewire-lib: add helper functions for asynchronous transactions to transfer MIDI messages") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Jamie Bainbridge authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 105f5528 ] In situations where an skb is paged, the transport header pointer and tail pointer can be the same because the skb contents are in frags. This results in ioctl(SIOCINQ/FIONREAD) incorrectly returning a length of 0 when the length to receive is actually greater than zero. skb->len is already correctly set in ip6_input_finish() with pskb_pull(), so use skb->len as it always returns the correct result for both linear and paged data. Signed-off-by:
Jamie Bainbridge <jbainbri@redhat.com> Signed-off-by:
-
WANG Cong authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 199ab00f ] Andrey reported a out-of-bound access in ip6_tnl_xmit(), this is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4 neigh key as an IPv6 address: neigh = dst_neigh_lookup(skb_dst(skb), &ipv6_hdr(skb)->daddr); if (!neigh) goto tx_err_link_failure; addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE addr_type = ipv6_addr_type(addr6); if (addr_type == IPV6_ADDR_ANY) addr6 = &ipv6_hdr(skb)->daddr; memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr)); Also the network header of the skb at this point should be still IPv4 for 4in6 tunnels, we shold not just use it as IPv6 header. This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it is, we are safe to do the nexthop lookup using skb_dst() and ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which dest address we can pick here, we have to rely on callers to fill it from tunnel config, so just fall to ip6_route_output() to make the decision. Fixes: ea3dc960 ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Herbert Xu authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit f6478218 ] When a parent macvlan device is destroyed we end up purging its broadcast queue without dropping the device reference count on the packet source device. This causes the source device to linger. This patch drops that reference count. Fixes: 260916df ("macvlan: Fix potential use-after free for...") Reported-by:
Joe Ghalam <Joe.Ghalam@dell.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 723b929c ] Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by:
-
Tushar Dave authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit c70b17b7 ] Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by:
-
David Ahern authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 557c44be ] Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997 ("ipv6: Create percpu rt6_info") Reported-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Tested-by:
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 9d386cd9 ] This patch is prompted by a static checker warning about a potential use after free. The concern is that netif_rx_ni() can free "skb" and we call it twice. When I look at the commit that added this, it looks like some stray lines were added accidentally. It doesn't make sense to me that we would recieve the same data two times. I asked the author but never recieved a response. I can't test this code, but I'm pretty sure my patch is correct. Fixes: 4b063258 ("dp83640: Delay scheduled work.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 17c3060b ] In the (very unlikely) case a passive socket becomes a listener, we do not want to duplicate its saved SYN headers. This would lead to double frees, use after free, and please hackers and various fuzzers Tested: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, IPPROTO_TCP, TCP_SAVE_SYN, [1], 4) = 0 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 connect(4, AF_UNSPEC, ...) = 0 +0 close(3) = 0 +0 bind(4, ..., ...) = 0 +0 listen(4, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 Fixes: cd8ae852 ("tcp: provide SYN headers for passive connections") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Xin Long authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 34b2789f ] Now sctp doesn't check sock's state before listening on it. It could even cause changing a sock with any state to become a listening sock when doing sctp_listen. This patch is to fix it by checking sock's state in sctp_listen, so that it will listen on the sock with right state. Reported-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Florian Larysch authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit a8801799 ] inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to ip_route_input when iif is given. If a multipath route is present for the designated destination, ip_multipath_icmp_hash ends up being called, which uses the source/destination addresses within the skb to calculate a hash. However, those are not set in the synthetic skb, causing it to return an arbitrary and incorrect result. Instead, use UDP, which gets no such special treatment. Signed-off-by:
Florian Larysch <fl@n621.de> Signed-off-by:
-
Guillaume Nault authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 249ee819 ] PPP pseudo-wire type is 7 (11 is L2TP_PWTYPE_IP). Fixes: f1f39f91 ("l2tp: auto load type modules") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit e08293a4 ] Take a reference on the sessions returned by l2tp_session_find_nth() (and rename it l2tp_session_get_nth() to reflect this change), so that caller is assured that the session isn't going to disappear while processing it. For procfs and debugfs handlers, the session is held in the .start() callback and dropped in .show(). Given that pppol2tp_seq_session_show() dereferences the associated PPPoL2TP socket and that l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to call the session's .ref() callback to prevent the socket from going away from under us. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Fixes: 0ad66140 ("l2tp: Add debugfs files for dumping l2tp debug info") Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by:
-
Guillaume Nault authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit e91793bb ] The Rx path may grab the socket right before pppol2tp_release(), but nothing guarantees that it will enqueue packets before skb_queue_purge(). Therefore, the socket can be destroyed without its queues fully purged. Fix this by purging queues in pppol2tp_session_destruct() where we're guaranteed nothing is still referencing the socket. Fixes: 9e9cb622 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by:
-
Nathan Sullivan authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 49d52e81 ] If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Acked-by:
Xander Huff <xander.huff@ni.com> Acked-by:
Kyle Roeschley <kyle.roeschley@ni.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1688505 [ Upstream commit 48481c8f ] Dmitry posted a nice reproducer of a bug triggering in neigh_probe() when dereferencing a NULL neigh->ops->solicit method. This can happen for arp_direct_ops/ndisc_direct_ops and similar, which can be used for NUD_NOARP neighbours (created when dev->header_ops is NULL). Admin can then force changing nud_state to some other state that would fire neigh timer. Signed-off-by:
-
