- 03 Jun, 2008 38 commits
-
-
Tomas Winkler authored
This patch adds initial calibration framework for 5000 HW faimily. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Tomas Winkler authored
This patch moves iwl_rx_missed_beacon_notif rx handler to iwl-rx.c. Signed-off-by:
-
Tomas Winkler authored
This patch moves add_sta hander to iwl-sta.c. Signed-off-by:
-
Tomas Winkler authored
This patch adds remove station functionality, which is required for 5000 and AP mode. There are still some gaps in managment that need to be closed but it provides sufficient functionality for 5000 HW. Signed-off-by:
-
Tomas Winkler authored
This patch moves iwl_rxq_stop into iwl-rx.c. Signed-off-by:
-
Tomas Winkler authored
This patch moves txq_ctx_stop into iwl-tx.c iwlcore module. Signed-off-by:
-
Tomas Winkler authored
This patch refactors stop master function for 4965 and 5000. Currently it duplicates the function. Signed-off-by:
-
Tomas Winkler authored
This patch adds apm stop function for 4965 and 5000. Signed-off-by:
-
Tomas Winkler authored
This patch implements apm reset flow for 4965 and 5000. Signed-off-by:
-
Tomas Winkler authored
This patch setups L1 L0S pci link values. Signed-off-by:
-
Tomas Winkler authored
This patch removes 4965 from alive_resp and init_alivie_resp. Signed-off-by:
-
Tomas Winkler authored
This patch cleans up alive_start routine. It removes 4965 from the common code and moves the run time calibration reset into a common code. Signed-off-by:
-
Tomas Winkler authored
This patch removes notif_missed_beacons from priv since it was never used. Missed beacons notification will have only meaning if roaming will be implemented in mac80211. Signed-off-by:
-
Tomas Winkler authored
This patch removes unused variable from __iwl4965_down. Signed-off-by:
-
Tomas Winkler authored
This patch marks 4965 ucode types. Signed-off-by:
-
Zhu Yi authored
This patch creates driver's debugfs tree under wiphy->debugfsdir. This patch fixes collision in debugfs if two or more NICs are plugged. Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Ron Rindjunsky authored
This patch increases iwl_cmd payload maximum size from 360 to 640 to fit some of iwl5000 commands as well. Signed-off-by:
-
Gregory Greenman authored
This patch updates the usage of the pointers to error and log tables received in alive response w.r.t. the current uCode image. Signed-off-by:
-
Ron Rindjunsky authored
This patch fills the valid_rtc_data_addr handler in iwl5000. Signed-off-by:
-
Ester Kummer authored
This patch moves the function iwl_dump_nic_error_log to iwlcore. Remove sysfs entry it cannot be really triggered. Signed-off-by:
Ester Kummer <ester.kummer@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This patch adds HT IE in the scan list that is returned to user level through wext. This is useful to let wpa_supplicant if a bss supports 11n or not: WEP and TKIP are not supported in 11n. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Holger Schurig authored
The old code misbehaved because it polled card status and always called the "tx over" code-path. This also fixes a hard lockup by not allowing and card interrupts while transferring a TX frame or a command into the card. Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Javier Cardona authored
Implemented rate adaptation support via 'iwconfig rate' API. It is now possible to specify a bit-rate value and append 'auto'. That will configure rate adaptation to use all bit-rates equal or lower than than selected value. Made lbs_cmd_802_11_rate_adapt_rateset a direct command. Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Acked-by:
-
Johannes Berg authored
Currently, b43legacy is broken due to commit fbad4598ca826b994d0fd4ce3deebc9cd1960b31 Author: Johannes Berg <johannes@sipsolutions.net> Date: Thu May 15 12:55:29 2008 +0200 mac80211: move TX info into skb->cb when compiled with only PIO or only DMA because I forgot to update two stubs. This patch fixes it. Signed-off-by:Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Tomas Winkler authored
This patch fixes a deadlock of sta->lock use, occurring while changing tx aggregation states, as dev_queue_xmit end up in new function test_and_clear_sta_flags that uses that lock thus leading to deadlock Signed-off-by:
-
Tomas Winkler authored
fix bss not initialized in ieee80211_get_buffered_bc and unbalanced locking Signed-off-by:
-
Scott Ashcroft authored
While figuring out the TKIP problem I found a bug in the code which adds the 11g rates. It's using sizeof instead of ARRAY_SIZE to terminate the for loop. This makes it fall off the end of the rates array start into the frequency array instead. Running "iwlist rate" should show the problem as there will always be 32 rates with the last few being bogus. The following patch will fix it. Signed-off-by:
Scott Ashcroft <scott.ashcroft@talk21.com> Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
-
Johannes Berg authored
ath5k still uses the "(void*) skb->cb" direct cast, use IEEE80211_SKB_CB instead. Signed-off-by:
-
Holger Schurig authored
If we don't check for a command response early, but rather sleep, then we might sleep despite an already-received command response. This will lead to a command-timeout. Signed-off-by:
-
Holger Schurig authored
... because lbs_pr_XXX prefixes all messages with "libertas: " Signed-off-by:
-
Holger Schurig authored
Keep the timeout the same (1000*500 == 100000 * 5), but take shorter naps. Makes downloading the firmware slightly faster. Signed-off-by:
-
Holger Schurig authored
priv->driver_lock has already been unlocked some lines above. This patch fixes the sparse warning: drivers/net/wireless/libertas/main.c:792:6: warning: context problem in 'lbs_thread': '_spin_unlock_irq' expected different context drivers/net/wireless/libertas/main.c:792:6: context 'lock': wanted >= 1, got 0 Signed-of-by:
-
Johannes Berg authored
This cleans up the skb reallocation code to avoid problems with skb->truesize, not resize an skb twice for a single output path because we didn't expand it enough during the first copy and also removes the code to further expand it during crypto operations which will no longer be necessary. Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
Daniel Walker <dwalker@mvista.com> Acked-by:
Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
-
Daniel Walker authored
Signed-off-by:
-
David Woodhouse authored
Signed-off-by:
-
Johannes Berg authored
This patch enables b43 to do mesh networking, tested against my zd1211rw dongle. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
- 22 May, 2008 2 commits
-
-
Johannes Berg authored
The useless channel use statistics are quite a lot of code, currently use integer divisions in the packet fast path, are rather inaccurate since they do not account for retries and finally nobody even cares. Hence, remove them completely. Signed-off-by:
-
Michael Buesch authored
This adds support for firmware markers. With firmware markers it's easily possible to check whether the firmware runs some codepath or not. The driver will throw a message when the firmware executes a MARKER(x). Signed-off-by:
-
