Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:

WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared ep93xx-spi.0
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_spi_prepare_hardware
__spi_pump_messages
__spi_sync
spi_sync
spi_sync_transfer.constprop.0
regmap_spi_write
_regmap_raw_write_impl
_regmap_bus_raw_write
_regmap_update_bits
regmap_update_bits_base
cs4271_component_probe
snd_soc_component_probe
soc_probe_component
snd_soc_bind_card
edb93xx_probe
...
spi_master spi0: failed to prepare transfer hardware: -108
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210726140001.24820-3-nikita.shubin@maquefel.meSigned-off-by: Mark Brown <broonie@kernel.org>

This only works when the native chipselect is in use. On a board with a
Ti ADS7950 8 channel ADC. This patch reduces the time to read out all
channels once from 280 us to 20 us.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210727124226.5571-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

In some cases reset_sccr1() can be called when no message available.
This means that there is no associated chip to receive that message
and hence no threshold needs to be set. Adapt the function to such
cases.

Fixes: 3bbdc083 ("spi: pxa2xx: Reuse int_stop_and_reset() in couple of places")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210721121520.62605-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "spi: fsi: Reduce max transfer size to 8 bytes" from Eddie James <eajames@linux.ibm.com>:

The security restrictions on the FSI-attached SPI controllers have
been applied universally to all controllers, so the controller can no
longer transfer more than 8 bytes for one transfer. Refactor the driver
to remove the looping and support for larger transfers, and remove the
"restricted" compatible string, as all the controllers are now
considered restricted.

Eddie James (2):
  spi: fsi: Reduce max transfer size to 8 bytes
  dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible

 .../devicetree/bindings/fsi/ibm,fsi2spi.yaml  |   1 -
 drivers/spi/spi-fsi.c                         | 125 +++---------------
 2 files changed, 22 insertions(+), 104 deletions(-)

--
2.27.0

Remove this compatible string from the FSI SPI controller
documentation, since the security restrictions have been
universally applied to the controllers.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210716133915.14697-3-eajames@linux.ibm.comSigned-off-by: Mark Brown <broonie@kernel.org>

Security changes have forced the SPI controllers to be limited to
8 byte reads. Refactor the sequencing to just handle 8 bytes at a
time.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210716133915.14697-2-eajames@linux.ibm.comSigned-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

For each usage of fifo_words it is clear if ->dynamic_burst is true or
not. This can be used to simplify the function a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210716173927.2050620-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Reuse int_stop_and_reset() in couple of places.

While at it, change the order of the int_stop_and_reset() and pxa2xx_spi_off()
to be in align with the similar flow in int_error_stop().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210719074842.36060-3-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order to allow reset_sccr1() to be reused in DMA paths,
reset DMA bits in CR1 in this function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210719074842.36060-2-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert reset_sccr1() to use pxa2xx_spi_update().
It will help for further improvements.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210719074842.36060-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The comment in setup_fifo_xfer() about setting the watermark wasn't
quite proper grammar and also stopped making sense around commit
6d66507d ("spi: spi-geni-qcom: Don't wait to start 1st transfer if
transmitting"). After that commit we actually start the transfer
_before_ the watermark interrupt comes.

I don't think the comment really has any value anymore. We've already
got a comment when we grab the spinlock saying that our interrupt can
come any time as a result of the things in the locked section. Let's
just remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210712085010.1.Ie3bb9f9d30d6475bb75251d32635194c1c72b9ee@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

Convert omap-spi dt-binding documentation from txt to yaml format.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210621092900.951-1-a-govindraju@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch support tick_delay setting, some users need use
high-speed spi speed, which can use tick_delay to tuning spi clk timing.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210713114048.29509-1-mason.zhang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This series contains fixes & cleanup mainly regarding fifo
and the way end of transfer triggered, when used with or
without DMA.
An additional patch cleans up the pm_runtime calls and another
one enables the autosuspend.

v2: - split pm_runtime fix patch into two
    - correct revert commit subject line

Alain Volmat (6):
  spi: stm32: fixes pm_runtime calls in probe/remove
  spi: stm32: enable pm_runtime autosuspend
  spi: stm32h7: fix full duplex irq handler handling
  spi: stm32: Revert "properly handle 0 byte transfer"
  spi: stm32h7: don't wait for EOT and flush fifo on disable
  spi: stm32: finalize message either on dma callback or EOT

Amelie Delaunay (1):
  spi: stm32h7: rework rx fifo read function

 drivers/spi/spi-stm32.c | 146 +++++++++++++++++-----------------------
 1 file changed, 61 insertions(+), 85 deletions(-)

--
2.25.1

This patch add no_need_unprepare support for spi, if spi src clk is
MAIN PLL, it can keep the clk_prepare and will not cause low power
issue. So we no need do clk_prepare/clk_unprepare in runtime pm,
and it will get better performance, because clk_prepare has called
mutex lock.
In the same way,
clk_get_rate also has called mutex lock, so we moved it to spi_probe.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210629100814.21402-1-mason.zhang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

this patch update spi master bingdings for MT6893 SOC.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210629101310.21045-1-mason.zhang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix kernel-doc warning in spi.h by adding the missing kernel-doc entry
and also correct the original comment so that they both indicate the
correct polarity of the flag.

../include/linux/spi/spi.h:673: warning: Function parameter or member 'devm_allocated' not described in 'spi_controller'

Fixes: 794aaf01 ("spi: Fix use-after-free with devm_spi_alloc_*")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: William A. Kennington III <wak@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/20210628210520.5712-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Depending on the usage, it is necessary to perform the finalize
message operation either upon receiving the EOT interruption,
eiher upon receiving the DMA callback. Indeed, when relying
on DMA, even if the SPI EOT IT has been received, it is
necessary to wait for the end of the DMA RX transaction before
accessing to the data.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-8-git-send-email-alain.volmat@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

In nominal cases, disable is called as part of the unprepare_message,
after receiving a EOT and after receiving all data so it doesn't
make sense to check for EOT and empty the FIFO.
Moreover, at the end of the disable, the SPI is disable (SPE) leading
to clear of all internal FIFO, leaving the IP in a known status.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-7-git-send-email-alain.volmat@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove flush parameter and check RXWNE or RXPLVL when end of transfer
flag is set.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-6-git-send-email-alain.volmat@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

0 byte transfer handling is now done within the core in code added
by commit b3063203 ("spi: Skip zero-length transfers in spi_transfer_one_message()")

This reverts commit 2269f5a8 ("spi: stm32: properly handle 0 byte transfer")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-5-git-send-email-alain.volmat@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

This commit enables the pm_runtime autosuspend
and sets a 1ms autosuspend delay.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-3-git-send-email-alain.volmat@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.

Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.

It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped.  Refine the tests.

There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.

(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)

Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.

TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Ingo Molnar:
 "Two fixes:

   - Fix a MIPS IRQ handling RCU bug

   - Remove a DocBook annotation for a parameter that doesn't exist
     anymore"

* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
  genirq/irqdesc: Drop excess kernel-doc entry @lookup

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - Fix load tracking bug/inconsistency

   - Fix a sporadic CFS bandwidth constraints enforcement bug

   - Fix a uclamp utilization tracking bug for newly woken tasks"

* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Ignore max aggregation if rq is idle
  sched/fair: Fix CFS bandwidth hrtimer expiry type
  sched/fair: Sync load_sum with load_avg after dequeue

Pull perf fixes from Ingo Molnar:
 "A fix and a hardware-enablement addition:

   - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup

   - Add cstate event support for Intel ICELAKE_X and ICELAKE_D"

* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Clean up error handling path of iio mapping
  perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support

Pull locking fixes from Ingo Molnar:

 - Fix a Sparc crash

 - Fix a number of objtool warnings

 - Fix /proc/lockdep output on certain configs

 - Restore a kprobes fail-safe

* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: sparc: Fix arch_cmpxchg64_local()
  kprobe/static_call: Restore missing static_call_text_reserved()
  static_call: Fix static_call_text_reserved() vs __init
  jump_label: Fix jump_label_text_reserved() vs __init
  locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes and clean ups in the core and various
  drivers.

  The only core change in behaviour is the I/O retry for spinup notify,
  but that shouldn't impact anything other than the failing case"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  scsi: virtio_scsi: Add validation for residual bytes from response
  scsi: ipr: System crashes when seeing type 20 error
  scsi: core: Retry I/O for Notify (Enable Spinup) Required error
  scsi: mpi3mr: Fix warnings reported by smatch
  scsi: qedf: Add check to synchronize abort and flush
  scsi: MAINTAINERS: Add mpi3mr driver maintainers
  scsi: libfc: Fix array index out of bound exception
  scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
  scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
  scsi: qedf: Use DEVICE_ATTR_RO() macro
  scsi: qedi: Use DEVICE_ATTR_RO() macro
  scsi: message: mptfc: Switch from pci_ to dma_ API
  scsi: be2iscsi: Fix some missing space in some messages
  scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
  scsi: ufs: Fix build warning without CONFIG_PM
  scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
  scsi: qla2xxx: Add heartbeat check
  scsi: virtio_scsi: Do not overwrite SCSI status
  scsi: libsas: Add LUN number check in .slave_alloc callback
  scsi: core: Inline scsi_mq_alloc_queue()
  ...

Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Enable use of BPF counters with 'perf stat --for-each-cgroup',
     using per-CPU 'cgroup-switch' events with an attached BPF program
     that does aggregation per-cgroup in the kernel instead of using
     per-cgroup perf events.

   - Add Topdown metrics L2 events as default events in 'perf stat' for
     systems having those events.

  Hardware tracing:

   - Add a config for max loops without consuming a packet in the Intel
     PT packet decoder, set via 'perf config intel-pt.max-loops=N'

  Hardware enablement:

   - Disable misleading NMI watchdog message in 'perf stat' on hybrid
     systems such as Intel Alder Lake.

   - Add a dummy event on hybrid systems to collect metadata records.

   - Add 24x7 nest metric events for the Power10 platform.

  Fixes:

   - Fix event parsing for PMUs starting with the same prefix.

   - Fix the 'perf trace' 'trace' alias installation dir.

   - Fix buffer size to report iregs in perf script python scripts,
     supporting the extended registers in PowerPC.

   - Fix overflow in elf_sec__is_text().

   - Fix 's' on source line when disasm is empty in the annotation TUI,
     accessible via 'perf annotate', 'perf report' and 'perf top'.

   - Plug leaks in scandir() returned dirent entries in 'perf test' when
     sorting the shell tests.

   - Fix --task and --stat with pipe input in 'perf report'.

   - Fix 'perf probe' use of debuginfo files by build id.

   - If a DSO has both dynsym and symtab ELF sections, read from both
     when loading the symbol table, fixing a problem processing Fedora
     32 glibc DSOs.

  Libraries:

   - Add grouping of events to libperf, from code in tools/perf,
     allowing libperf users to use that mode.

  Misc:

   - Filter plt stubs from the 'perf probe --functions' output.

   - Update UAPI header copies for asound, DRM, mman-common.h and the
     ones affected by the quotactl_fd syscall"

* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
  perf test: Add free() calls for scandir() returned dirent entries
  libperf: Add tests for perf_evlist__set_leader()
  libperf: Remove BUG_ON() from library code in get_group_fd()
  libperf: Add group support to perf_evsel__open()
  perf tools: Fix pattern matching for same substring in different PMU type
  perf record: Add a dummy event on hybrid systems to collect metadata records
  perf stat: Add Topdown metrics L2 events as default events
  libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
  libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
  libperf: Move 'leader' from tools/perf to perf_evsel::leader
  libperf: Move 'idx' from tools/perf to perf_evsel::idx
  libperf: Change tests to single static and shared binaries
  perf intel-pt: Add a config for max loops without consuming a packet
  perf stat: Disable the NMI watchdog message on hybrid
  perf vendor events power10: Adds 24x7 nest metric events for power10 platform
  perf script python: Fix buffer size to report iregs in perf script
  perf trace: Fix the perf trace link location
  perf top: Fix overflow in elf_sec__is_text()
  perf annotate: Fix 's' on source line when disasm is empty
  perf probe: Do not show @plt function by default
  ...

Pull RTC updates from Alexandre Belloni:
 "Mostly documentation/comment changes and non urgent fixes.

   - add or fix SPDX identifiers

   - NXP pcf*: fix datasheet URLs

   - imxdi: add wakeup support

   - pcf2127: handle timestamp interrupts, this fixes a possible
     interrupt storm

   - bd70528: Drop BD70528 support"

* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: pcf8523: rename register and bit defines
  rtc: pcf2127: handle timestamp interrupts
  rtc: at91sam9: Remove unnecessary offset variable checks
  rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
  rtc: spear: convert to SPDX identifier
  rtc: tps6586x: convert to SPDX identifier
  rtc: tps80031: convert to SPDX identifier
  rtc: rtd119x: Fix format of SPDX identifier
  rtc: sc27xx: Fix format of SPDX identifier
  rtc: palmas: convert to SPDX identifier
  rtc: max6900: convert to SPDX identifier
  rtc: ds1374: convert to SPDX identifier
  rtc: au1xxx: convert to SPDX identifier
  rtc: pcf85063: Update the PCF85063A datasheet revision
  dt-bindings: rtc: ti,bq32k: take maintainership
  rtc: pcf8563: Fix the datasheet URL
  rtc: pcf85063: Fix the datasheet URL
  rtc: pcf2127: Fix the datasheet URL
  dt-bindings: rtc: ti,bq32k: Convert to json-schema
  dt-bindings: rtc: rx8900: Convert to YAML schema
  ...

Commit dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.

A superior workaround is achieved with commit a0b8200d ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").

This patch reverts the dummy field and the pahole version check.

Fixes: dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.

Fixes: 7fd70c65 ("ARM: irqstat: Get rid of duplicated declaration")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com

Pull cifs fixes from Steve French:
 "13 cifs/smb3 fixes. Most are to address minor issues pointed out by
  Coverity.

  Also includes a packet signing enhancement and mount improvement"

* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal version number
  cifs: prevent NULL deref in cifs_compose_mount_options()
  SMB3.1.1: Add support for negotiating signing algorithm
  cifs: use helpers when parsing uid/gid mount options and validate them
  CIFS: Clarify SMB1 code for POSIX Lock
  CIFS: Clarify SMB1 code for rename open file
  CIFS: Clarify SMB1 code for delete
  CIFS: Clarify SMB1 code for SetFileSize
  smb3: fix typo in header file
  CIFS: Clarify SMB1 code for UnixSetPathInfo
  CIFS: Clarify SMB1 code for UnixCreateSymLink
  cifs: clarify SMB1 code for UnixCreateHardLink
  cifs: make locking consistent around the server session status

Pull pci fix from Bjorn Helgaas:
 "Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
  broke ppc:sam460ex (Bjorn Helgaas)"

* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Coalesce host bridge contiguous apertures"

Pull i3c updates from Alexandre Belloni:

 - two small fixes to the svc driver

* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix doc warning in svc-i3c-master.c
  i3c: master: svc: drop free_irq of devm_request_irq allocated irq