- 03 Dec, 2009 40 commits
-
-
Jesse Brandeburg authored
drop variables that had cache lines modified in simultaneous hot paths. keep some variables modified on hot paths but make their storage per queue. cache align DMA data buffer start addresses. cache align (padding) some structures that end within a cacheline. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
decrease the memory utilization of the tx / rx queue allocation by changing the default ring size to 512 (from 1024). At 1024 rx entries of 2KB each (from 4kB slab) with 16 queues ixgbe was using 64 MB of memory per port, which is not necessary. Users can still change queue lengths with ethtool -k. Signed-off-by:
-
Yi Zou authored
This removes the Tx queue selection for FCoE traffic from ixgbe_xmit_frame() and does it in the ndo_select_queue() call, moving all Tx queue selection into a single routine. Signed-off-by:
Yi Zou <yi.zou@intel.com> Acked-by:
-
Yi Zou authored
Store the user priority for FCoE and use it directly for outgoing FCoE traffic when DCB is enabled. Signed-off-by:
-
Oliver Neukum authored
Using remote wakeup and delayed transmission to allow online device to go into usb autosuspend. Minimal alternate support for devices that don't support remote wakeup. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Oliver Neukum authored
Normal resume can do double duty as reset_resume() for this driver as it keeps no state in the device Signed-off-by:
-
-
-
Michael Chan authored
Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
And display it through ethtool -i. Signed-off-by:
-
Michael Chan authored
Signed-off-by:
Benjamin Li <benli@broadcom.com> Signed-off-by:
-
Michael Chan authored
To help debug the problem. Signed-off-by:
-
Michael Chan authored
To prevent race conditions with other reset events. Signed-off-by:
-
Matt Carlson authored
This patch updates the tg3 version to 3.105. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Reviewed-by:
-
Matt Carlson authored
Tg3's firmware is no longer loaded from tg3_init_one(). Remove the error path that releases the firmware back to the system. Signed-off-by:
-
Matt Carlson authored
If the driver needs to use PCI configuration space to read the VPD data, the accesses could collide with the pci_read_vpd() function. This patch converts the driver to use pci_read_vpd() to avoid any potential collisions. Signed-off-by:
-
Matt Carlson authored
This patch cleans up the VPD code by creating preprocessor definitions and using them in the place of hardcoded constants. Signed-off-by:
-
Matt Carlson authored
This patch adds the 57765 asic revision. Signed-off-by:
-
Matt Carlson authored
The 57765 asic rev has MSI-X capability, but does not support TSS. This patch changes the tx paths so that TSS is explicitly mentioned, rather than implied through the ENABLE_MSIX flag. Signed-off-by:
-
Joe Perches authored
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Ajit Khaparde authored
Signed-off-by:
Ajit Khaparde <ajitk@serverengines.com> Signed-off-by:
-
Ajit Khaparde authored
Add support for WOL using Magic Packet after suspend is done. Signed-off-by:
Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by:
-
Ajit Khaparde authored
When a firmware command fails, only the failure codes are printed. It is difficult to co-relate this to the actual command that has failed. These changes will now print the command code that has failed. Signed-off-by:
-
Eric W. Biederman authored
This function walks the whole hashtable so there is no point in passing it a network namespace. Instead I purge all timewait sockets from dead network namespaces that I find. If the namespace is one of the once I am trying to purge I am guaranteed no new timewait sockets can be formed so this will get them all. If the namespace is one I am not acting for it might form a few more but I will call inet_twsk_purge again and shortly to get rid of them. In any even if the network namespace is dead timewait sockets are useless. Move the calls of inet_twsk_purge into batch_exit routines so that if I am killing a bunch of namespaces at once I will just call inet_twsk_purge once and save a lot of redundant unnecessary work. My simple 4k network namespace exit test the cleanup time dropped from roughly 8.2s to 1.6s. While the time spent running inet_twsk_purge fell to about 2ms. 1ms for ipv4 and 1ms for ipv6. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
While we are looking up entries to free there is no reason to take the lock in inet_twsk_purge. We have to drop locks and restart occassionally anyway so adding a few more in case we get on the wrong list because of a timewait move is no big deal. At the same time not taking the lock for long periods of time is much more polite to the rest of the users of the hash table. In my test configuration of killing 4k network namespaces this change causes 4k back to back runs of inet_twsk_purge on an empty hash table to go from roughly 20.7s to 3.3s, and the total time to destroy 4k network namespaces goes from roughly 44s to 3.3s. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
Refactor the code so fib_rules_register always takes a template instead of the actual fib_rules_ops structure that will be used. This is required for network namespace support so 2 out of the 3 callers already do this, it allows the error handling to be made common, and it allows fib_rules_unregister to free the template for hte caller. Modify fib_rules_unregister to use call_rcu instead of syncrhonize_rcu to allw multiple namespaces to be cleaned up in the same rcu grace period. Signed-off-by:
-
Eric W. Biederman authored
This allows namespace exit methods to batch work that comes requires an rcu barrier using call_rcu without having to treat the unregister_pernet_operations cases specially. Signed-off-by:
-
Eric W. Biederman authored
xfrm.nlsk is provided by the xfrm_user module and is access via rcu from other parts of the xfrm code. Add xfrm.nlsk_stash a copy of xfrm.nlsk that will never be set to NULL. This allows the synchronize_net and netlink_kernel_release to be deferred until a whole batch of xfrm.nlsk sockets have been set to NULL. Signed-off-by:
-
Eric W. Biederman authored
Move network device exit batching from a special case in net_namespace.c to using common mechanisms in dev.c Signed-off-by:
-
Eric W. Biederman authored
- Add exit_list to struct net to support building lists of network namespaces to cleanup. - Add exit_batch to pernet_operations to allow running operations only once during a network namespace exit. Instead of once per network namespace. - Factor opt ops_exit_list and ops_exit_free so the logic with cleanup up a network namespace does not need to be duplicated. Signed-off-by:
-
Patrick McHardy authored
commit 8ec1e0ebe26087bfc5c0394ada5feb5758014fc8 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:16:35 2009 +0100 ipv4: add sysctl to accept packets with local source addresses Change fib_validate_source() to accept packets with a local source address when the "accept_local" sysctl is set for the incoming inet device. Combined with the previous patches, this allows to communicate between multiple local interfaces over the wire. Signed-off-by:Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
commit d124356ce314fff22a047ea334379d5105b2d834 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:16:35 2009 +0100 net: fib_rules: allow to delete local rule Allow to delete the local rule and recreate it with a higher priority. This can be used to force packets with a local destination out on the wire instead of routing them to loopback. Additionally this patch allows to recreate rules with a priority of 0. Combined with the previous patch to allow oif classification, a socket can be bound to the desired interface and packets routed to the wire like this: # move local rule to lower priority ip rule add pref 1000 lookup local ip rule del pref 0 # route packets of sockets bound to eth0 to the wire independant # of the destination address ip rule add pref 100 oif eth0 lookup 100 ip route add default dev eth0 table 100 Signed-off-by: -
Patrick McHardy authored
commit 68144d350f4f6c348659c825cde6a82b34c27a91 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:05:25 2009 +0100 net: fib_rules: add oif classification Support routing table lookup based on the flow's oif. This is useful to classify packets originating from sockets bound to interfaces differently. The route cache already includes the oif and needs no changes. Signed-off-by: -
Patrick McHardy authored
commit 229e77eec406ad68662f18e49fda8b5d366768c5 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:05:23 2009 +0100 net: fib_rules: rename ifindex/ifname/FRA_IFNAME to iifindex/iifname/FRA_IIFNAME The next patch will add oif classification, rename interface related members and attributes to reflect that they're used for iif classification. Signed-off-by: -
Patrick McHardy authored
commit b8952893d5d86f69c4e499d191b98c6658f64b0f Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:05:22 2009 +0100 net: fib_rules: rearrange struct fib_rule The ifname member is only used to resolve interface names and is not needed during rule lookups. The target and ctarget members however are used during rule lookups and are currently located in a second cacheline. Move ifname further to the end to make sure both target and ctarget are located in the same cacheline as other members used during rule lookups. The layout on 64 bit changes from: struct fib_rule { ... u32 table; /* 56 4 */ u8 action; /* 60 1 */ /* XXX 3 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ u32 target; /* 64 4 */ /* XXX 4 bytes hole, try to pack */ struct fib_rule * ctarget; /* 72 8 */ struct rcu_head rcu; /* 80 16 */ struct net * fr_net; /* 96 8 */ }; to: struct fib_rule { ... u32 table; /* 40 4 */ u8 action; /* 44 1 */ /* XXX 3 bytes hole, try to pack */ u32 target; /* 48 4 */ /* XXX 4 bytes hole, try to pack */ struct fib_rule * ctarget; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ char ifname[16]; /* 64 16 */ struct rcu_head rcu; /* 80 16 */ struct net * fr_net; /* 96 8 */ }; Signed-off-by: -
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
By default the RFCOMM layer would still use L2CAP basic mode. For testing purposes this option enables RFCOMM to select enhanced retransmission mode. Signed-off-by: -
Marcel Holtmann authored
For testing purposes it is important to modify the max transmit value. Signed-off-by: -
Amitkumar Karwar authored
The auto sleep mode for btmrvl driver is not enabled by default. This patch enables auto sleep mode when card is probed. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Gustavo F. Padovan authored
SendRRorRNR needs to acknowledge received I-frames (actually every packet needs to acknowledge received I-frames by sending the proper packet sequence number), so ReqSeq is set to the next I-frame number sequence to be pulled by the reassembly function. SendRRorRNR tells the remote side about local busy conditions, it sends a Receiver Ready frame if local busy is false or a Receiver Not Ready if local busy is true. ReqSeq is the packet's field to send the number of the acknowledged packets. Signed-off-by:
Gustavo F. Padovan <gustavo@las.ic.unicamp.br> Signed-off-by:
-
