- 03 Mar, 2018 11 commits
-
-
Arnd Bergmann authored
[ Upstream commit 506e8a91 ] dtc warns about two 'clocks' properties that have an extraneous '1' at the end: arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a arch/arm/boot/dts/ls1021a-qds.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2180000/mux@77/i2c@4/sgtl5000@2a:clocks[1]) Property 'clocks', cell 1 is not a phandle reference in /soc/i2c@2190000/sgtl5000@a arch/arm/boot/dts/ls1021a-twr.dtb: Warning (clocks_property): Missing property '#clock-cells' in node /soc/interrupt-controller@1400000 or bad phandle (referred from /soc/i2c@2190000/sgtl5000@a:clocks[1]) The clocks that get referenced here are fixed-rate, so they do not take any argument, and dtc interprets the next cell as a phandle, which is invalid. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cathy Avery authored
[ Upstream commit d1b8b239 ] When an I/O is returned with an srb_status of SRB_STATUS_INVALID_LUN which has zero good_bytes it must be assigned an error. Otherwise the I/O will be continuously requeued and will cause a deadlock in the case where disks are being hot added and removed. sd_probe_async will wait forever for its I/O to complete while holding scsi_sd_probe_domain. Also returning the default error of DID_TARGET_FAILURE causes multipath to not retry the I/O resulting in applications receiving I/O errors before a failover can occur. Signed-off-by:
Cathy Avery <cavery@redhat.com> Signed-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alexander Kochetkov authored
[ Upstream commit e688822d ] arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Radu Pirea authored
[ Upstream commit 66e900a3 ] The only part of atmel_spi_remove which needs to be atomic is hardware reset. atmel_spi_stop_dma calls dma_terminate_all and this needs interrupts enabled. atmel_spi_release_dma calls dma_release_channel and dma_release_channel locks a mutex inside of spin_lock. So the call of these functions can't be inside a spin_lock. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
Radu Pirea <radu.pirea@microchip.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Karol Herbst authored
[ Upstream commit a121027d ] On my GP107 when I load nouveau after unloading it, for some reason the GPU stopped sending or the CPU stopped receiving interrupts if MSI was enabled. Doing a rearm once before getting any interrupts fixes this. Signed-off-by:
Karol Herbst <kherbst@redhat.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 9ee332d9 ] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Chunyan Zhang authored
[ Upstream commit 36b0cb84 ] An additional 'ip' will be pushed to the stack, for restoring the DACR later, if CONFIG_CPU_SW_DOMAIN_PAN defined. However, the fixup still get the err_ptr by add #8*4 to sp, which results in the fact that the code area pointed by the LR will be overwritten, or the kernel will crash if CONFIG_DEBUG_RODATA is enabled. This patch fixes the stack mismatch. Fixes: a5e090ac ("ARM: software-based priviledged-no-access support") Signed-off-by:
Lvqiang Huang <Lvqiang.Huang@spreadtrum.com> Signed-off-by:
Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Brendan McGrath authored
[ Upstream commit 588753f1 ] One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by:
Brendan McGrath <redmcg@redmandi.dyndns.org> Signed-off-by:
-
Sascha Hauer authored
[ Upstream commit fdf2e821 ] When erased subpages are read then the BCH decoder returns STATUS_ERASED if they are all empty, or STATUS_UNCORRECTABLE if there are bitflips. When there are bitflips, we have to set these bits again to show the upper layers a completely erased page. When a bitflip happens in the exact byte where the bad block marker is, then this byte is swapped with another byte in block_mark_swapping(). The correction code then detects a bitflip in another subpage and no longer corrects the bitflip where it really happens. Correct this behaviour by calling block_mark_swapping() after the bitflips have been corrected. In our case UBIFS failed with this bug because it expects erased pages to be really empty: UBIFS error (pid 187): ubifs_scan: corrupt empty space at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: corruption at LEB 36:118735 UBIFS error (pid 187): ubifs_scanned_corruption: first 8192 bytes from LEB 36:118735 UBIFS error (pid 187): ubifs_scan: LEB 36 scanning failed UBIFS error (pid 187): do_commit: commit failed, error -117 Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
Richard Weinberger <richard@nod.at> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Yunlei He authored
commit dad48e73 upstream. Thread A: Thread B: -f2fs_remount -sbi->mount_opt.opt = 0; <--- -f2fs_iget -do_read_inode -f2fs_init_extent_tree -F2FS_I(inode)->extent_tree is NULL -default_options && parse_options -remount return <--- -f2fs_map_blocks -f2fs_lookup_extent_tree -f2fs_bug_on(sbi, !et); The same problem with f2fs_new_inode. Signed-off-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Anna-Maria Gleixner authored
commit 48d0c9be upstream. The POSIX specification defines that relative CLOCK_REALTIME timers are not affected by clock modifications. Those timers have to use CLOCK_MONOTONIC to ensure POSIX compliance. The introduction of the additional HRTIMER_MODE_PINNED mode broke this requirement for pinned timers. There is no user space visible impact because user space timers are not using pinned mode, but for consistency reasons this needs to be fixed. Check whether the mode has the HRTIMER_MODE_REL bit set instead of comparing with HRTIMER_MODE_ABS. Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Fixes: 597d0275 ("timers: Framework for identifying pinned timers") Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by:
-
- 28 Feb, 2018 22 commits
-
-
Greg Kroah-Hartman authored
-
Eric Biggers authored
When commit 4be5a281 ("binder: check for binder_thread allocation failure in binder_poll()") was applied to 4.4-stable and 4.9-stable it was forgotten to release the global binder lock in the new error path. The global binder lock wasn't removed until v4.14, by commit a60b890f ("binder: remove global binder lock"). Fix the new error path to release the lock. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Alex Deucher authored
commit 458d876e upstream. We only support vga_switcheroo and runtime pm on PX/HG systems so forcing runpm to 1 doesn't do anything useful anyway. Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so that the cleanup path is correct as well. This mirrors what radeon does as well. v2: rework the patch originally sent by Lukas (Alex) Acked-by:
Lukas Wunner <lukas@wunner.de> Reported-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> (v1) Cc: stable@vger.kernel.org Signed-off-by:
-
Yoshihiro Shimoda authored
commit 17aa31f1 upstream. This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3 ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Jack Pham authored
commit 6cf439e0 upstream. During _ffs_func_bind(), the received descriptors are evaluated to prepare for binding with the gadget in order to allocate endpoints and optionally set up OS descriptors. However, the high- and super-speed descriptors are only parsed based on whether the gadget_is_dualspeed() and gadget_is_superspeed() calls are true, respectively. This is a problem in case a userspace program always provides all of the {full,high,super,OS} descriptors when configuring a function. Then, for example if a gadget device is not capable of SuperSpeed, the call to ffs_do_descs() for the SS descriptors is skipped, resulting in an incorrect offset calculation for the vla_ptr when moving on to the OS descriptors that follow. This causes ffs_do_os_descs() to fail as it is now looking at the SS descriptors' offset within the raw_descs buffer instead. _ffs_func_bind() should evaluate the descriptors unconditionally, so remove the checks for gadget speed. Fixes: f0175ab5 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Co-Developed-by:
Mayank Rana <mrana@codeaurora.org> Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Karsten Koop authored
commit 52ad2bd8 upstream. This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by:
Karsten Koop <kkoop@ld-didactic.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit 61800263 upstream. There are 2 control endpoint structures for DWC3. However, the driver only updates the OUT direction control endpoint structure during ConnectDone event. DWC3 driver needs to update the endpoint max packet size for control IN endpoint as well. If the max packet size is not properly set, then the driver will incorrectly calculate the data transfer size and fail to send ZLP for HS/FS 3-stage control read transfer. The fix is simply to update the max packet size for the ep0 IN direction during ConnectDone event. Cc: stable@vger.kernel.org Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 06998a75 upstream. Similar to commit e10aec65 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.comSigned-off-by:
-
Jack Stocker authored
commit 7a1646d9 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by:
Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Michael Weiser authored
commit 5ee39a71 upstream. aarch64 unhandled signal kernel messages are very verbose, suggesting them to be more of a debugging aid: sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000046, in sigsegv[400000+71000] CPU: 1 PID: 33 Comm: sigsegv Tainted: G W 4.15.0-rc3+ #3 Hardware name: linux,dummy-virt (DT) pstate: 60000000 (nZCv daif -PAN -UAO) pc : 0x4003f4 lr : 0x4006bc sp : 0000fffffe94a060 x29: 0000fffffe94a070 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 00000000004001b0 x23: 0000000000486ac8 x22: 00000000004001c8 x21: 0000000000000000 x20: 0000000000400be8 x19: 0000000000400b30 x18: 0000000000484728 x17: 000000000865ffc8 x16: 000000000000270f x15: 00000000000000b0 x14: 0000000000000002 x13: 0000000000000001 x12: 0000000000000000 x11: 0000000000000000 x10: 0008000020008008 x9 : 000000000000000f x8 : ffffffffffffffff x7 : 0004000000000000 x6 : ffffffffffffffff x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000004003e4 x2 : 0000fffffe94a1e8 x1 : 000000000000000a x0 : 0000000000000000 Disable them by default, so they can be enabled using /proc/sys/debug/exception-trace. Cc: <stable@vger.kernel.org> Signed-off-by:
Michael Weiser <michael.weiser@gmx.de> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
AMAN DEEP authored
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() commit 46408ea5 upstream. There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Aman Deep <aman.deep@samsung.com> Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Shanker Donthineni authored
commit 21ec30c0 upstream. A DMB instruction can be used to ensure the relative order of only memory accesses before and after the barrier. Since writes to system registers are not memory operations, barrier DMB is not sufficient for observability of memory accesses that occur before ICC_SGI1R_EL1 writes. A DSB instruction ensures that no instructions that appear in program order after the DSB instruction, can execute until the DSB instruction has completed. Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com>, Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Arnd Bergmann authored
commit 85c615eb upstream. GCC-8 shows a warning for the x86 oprofile code that copies per-CPU data from CPU 0 to all other CPUs, which when building a non-SMP kernel turns into a memcpy() with identical source and destination pointers: arch/x86/oprofile/nmi_int.c: In function 'mux_clone': arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict] memcpy(per_cpu(cpu_msrs, cpu).multiplex, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ per_cpu(cpu_msrs, 0).multiplex, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(struct op_msr) * model->num_virt_counters); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/oprofile/nmi_int.c: In function 'nmi_setup': arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] I have analyzed a number of such warnings now: some are valid and the GCC warning is welcome. Others turned out to be false-positives, and GCC was changed to not warn about those any more. This is a corner case that is a false-positive but the GCC developers feel it's better to keep warning about it. In this case, it seems best to work around it by telling GCC a little more clearly that this code path is never hit with an IS_ENABLED() configuration check. Cc:stable as we also want old kernels to build cleanly with GCC-8. Signed-off-by:
-
Lars-Peter Clausen authored
commit f027e0b3 upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52f ("staging:iio: Add common ADIS library") Reported-by:
Robin Getz <Robin.Getz@analog.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Stefan Windfeldt-Prytz authored
commit 4cd140bd upstream. If no iio buffer has been set up and poll is called return 0. Without this check there will be a null pointer dereference when calling poll on a iio driver without an iio buffer. Cc: stable@vger.kernel.org Signed-off-by:
Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com> Signed-off-by:
-
Arnd Bergmann authored
commit bee92d06 upstream. gcc-8 warns about some obviously incorrect code: net/mac80211/cfg.c: In function 'cfg80211_beacon_dup': net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] From the context, I conclude that we want to copy from beacon into new_beacon, as we do in the rest of the function. Cc: stable@vger.kernel.org Fixes: 73da7d5b ("mac80211: add channel switch command and beacon callbacks") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Tyrel Datwyler authored
commit c3981365 upstream. The fcp_rsp_info structure as defined in the FC spec has an initial 3 bytes reserved field. The ibmvfc driver mistakenly defined this field as 4 bytes resulting in the rsp_code field being defined in what should be the start of the second reserved field and thus always being reported as zero by the driver. Ideally, we should wire ibmvfc up with libfc for the sake of code deduplication, and ease of maintaining standardized structures in a single place. However, for now simply fixup the definition in ibmvfc for backporting to distros on older kernels. Wiring up with libfc will be done in a followup patch. Cc: <stable@vger.kernel.org> Reported-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Paolo Abeni authored
commit f27337e1 upstream. After the commit e09acddf ("ip_tunnel: replace dst_cache with generic implementation"), a preemption debug warning is triggered on ip4 tunnels updating; the dst cache helper needs to be invoked in unpreemptible context. We don't need to load the cache on tunnel update, so this commit fixes the warning replacing the load with a dst cache reset, which is preempt safe. Fixes: e09acddf ("ip_tunnel: replace dst_cache with generic implementation") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Paolo Abeni authored
commit e09acddf upstream. The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Johan Hovold authored
commit eac56aa3 upstream. Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable <stable@vger.kernel.org> # 3.18 Acked-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Johan Hovold <johan@kernel.org> [lorenzo.pieralisi@arm.com: updated commit subject] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [johan: backport to 4.4] Signed-off-by:
-
Michael Ellerman authored
The backport of commit aa8a5e00 ("powerpc/64s: Add support for RFI flush of L1-D cache"), incorrectly placed the new RFI flush code inside an existing #ifdef CONFIG_HARDLOCKUP_DETECTOR block. This has the obvious effect of requiring HARDLOCKUP_DETECTOR to be enabled in order for RFI flush to be enabled, which is a bug. Fix it by moving the #endif up to where it belongs. Fixes: c3892946 ("powerpc/64s: Add support for RFI flush of L1-D cache") Reported-by:
Bernhard Kaindl <bernhard.kaindl@thalesgroup.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Paolo Abeni authored
commit 01ea306f upstream. The Syzbot reported a possible deadlock in the netfilter area caused by rtnl lock, xt lock and socket lock being acquired with a different order on different code paths, leading to the following backtrace: Reviewed-by:
Xin Long <lucien.xin@gmail.com> ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #301 Not tainted ------------------------------------------------------ syzkaller233489/4179 is trying to acquire lock: (rtnl_mutex){+.+.}, at: [<0000000048e996fd>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 but task is already holding lock: (&xt[i].mutex){+.+.}, at: [<00000000328553a2>] xt_find_table_lock+0x3e/0x3e0 net/netfilter/x_tables.c:1041 which lock already depends on the new lock. === Since commit 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope"), we already acquire the socket lock in the innermost scope, where needed. In such commit I forgot to remove the outer-most socket lock from the getsockopt() path, this commit addresses the issues dropping it now. v1 -> v2: fix bad subj, added relavant 'fixes' tag Fixes: 22265a5c ("netfilter: xt_TEE: resolve oif using netdevice notifiers") Fixes: 202f59af ("netfilter: ipt_CLUSTERIP: do not hold dev") Fixes: 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope") Reported-by: syzbot+ddde1c7b7ff7442d7f2d@syzkaller.appspotmail.com Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Tested-by:
Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by:
-
- 25 Feb, 2018 7 commits
-
-
Greg Kroah-Hartman authored
-
Wu Fengguang authored
commit b73f96fc upstream. Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Kamil Konieczny authored
commit c927b080 upstream. In AES-ECB mode crypt is done with key only, so any use of IV can cause kernel Oops. Use IV only in AES-CBC and AES-CTR. Signed-off-by:
Kamil Konieczny <k.konieczny@partner.samsung.com> Reported-by:
Anand Moon <linux.amoon@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jan Dakinevich authored
commit bcdde302 upstream - Expose all invalidation types to the L1 - Reject invvpid instruction, if L1 passed zero vpid value to single context invalidations Signed-off-by:
Jan Dakinevich <jan.dakinevich@gmail.com> Tested-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [jwang: port to 4.4] Signed-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
-
Jan Dakinevich authored
commit 63f3ac48 upstream - Remove VMX_EPT_EXTENT_INDIVIDUAL_ADDR, since there is no such type of EPT invalidation - Add missing VPID types names Signed-off-by:
-
Jim Mattson authored
commit 85c856b3 upstream Bitwise shifts by amounts greater than or equal to the width of the left operand are undefined. A malicious guest can exploit this to crash a 32-bit host, due to the BUG_ON(1)'s in handle_{invept,invvpid}. Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <1477496318-17681-1-git-send-email-jmattson@google.com> [Change 1UL to 1, to match the range check on the shift count. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [jwang: port from linux-4.9 to 4.4 ] Signed-off-by:
-
David Hildenbrand authored
(cherry picked from commit 6342c50a) vmx_complete_nested_posted_interrupt() can't fail, let's turn it into a void function. Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> [jwang: port to 4.4] Signed-off-by:
-
