- 24 Jan, 2023 4 commits
-
-
Sean Christopherson authored
Fix a build error due to a mixup during a recent refactoring. The error was reported during code review, but the fixed up patch didn't make it into the final commit. Fixes: 474856bad921 ("KVM: PPC: Move processor compatibility check to module init") Link: https://lore.kernel.org/all/87cz93snqc.fsf@mpe.ellerman.id.au Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:Sean Christopherson <seanjc@google.com> Message-Id: <20230119182158.4026656-1-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The first half or so patches fix semi-urgent, real-world relevant APICv and AVIC bugs. The second half fixes a variety of AVIC and optimized APIC map bugs where KVM doesn't play nice with various edge cases that are architecturally legal(ish), but are unlikely to occur in most real world scenarios Signed-off-by: -
Paolo Bonzini authored
ARM: * Fix the PMCR_EL0 reset value after the PMU rework * Correctly handle S2 fault triggered by a S1 page table walk by not always classifying it as a write, as this breaks on R/O memslots * Document why we cannot exit with KVM_EXIT_MMIO when taking a write fault from a S1 PTW on a R/O memslot * Put the Apple M2 on the naughty list for not being able to correctly implement the vgic SEIS feature, just like the M1 before it * Reviewer updates: Alex is stepping down, replaced by Zenghui x86: * Fix various rare locking issues in Xen emulation and teach lockdep to detect them * Documentation improvements * Do not return host topology information from KVM_GET_SUPPORTED_CPUID
-
Paolo Bonzini authored
The main theme of this series is to kill off kvm_arch_init(), kvm_arch_hardware_(un)setup(), and kvm_arch_check_processor_compat(), which all originated in x86 code from way back when, and needlessly complicate both common KVM code and architecture code. E.g. many architectures don't mark functions/data as __init/__ro_after_init purely because kvm_init() isn't marked __init to support x86's separate vendor modules. The idea/hope is that with those hooks gone (moved to arch code), it will be easier for x86 (and other architectures) to modify their module init sequences as needed without having to fight common KVM code. E.g. I'm hoping that ARM can build on this to simplify its hardware enabling logic, especially the pKVM side of things. There are bug fixes throughout this series. They are more scattered than I would usually prefer, but getting the sequencing correct was a gigantic pain for many of the x86 fixes due to needing to fix common code in order for the x86 fix to have any meaning. And while the bugs are often fatal, they aren't all that interesting for most users as they either require a malicious admin or broken hardware, i.e. aren't likely to be encountered by the vast majority of KVM users. So unless someone _really_ wants a particular fix isolated for backporting, I'm not planning on shuffling patches. Signed-off-by:
-
- 13 Jan, 2023 33 commits
-
-
Sean Christopherson authored
Move the guts of kvm_recalculate_apic_map()'s main loop to two separate helpers to handle recalculating the physical and logical pieces of the optimized map. Having 100+ lines of code in the for-loop makes it hard to understand what is being calculated where. No functional change intended. Suggested-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Greg Edwards authored
Legacy kernels prior to commit 4399c03c ("x86/apic: Remove verify_local_APIC()") write the APIC ID of the boot CPU twice to verify a functioning local APIC. This results in APIC acceleration inhibited on these kernels for reason APICV_INHIBIT_REASON_APIC_ID_MODIFIED. Allow the APICV_INHIBIT_REASON_APIC_ID_MODIFIED inhibit reason to be cleared if/when all APICs in xAPIC mode set their APIC ID back to the expected vcpu_id value. Fold the functionality previously in kvm_lapic_xapic_id_updated() into kvm_recalculate_apic_map(), as this allows examining all APICs in one pass. Fixes: 3743c2f0 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base") Signed-off-by:
Greg Edwards <gedwards@ddn.com> Link: https://lore.kernel.org/r/20221117183247.94314-1-gedwards@ddn.comSigned-off-by:
-
Sean Christopherson authored
Track the per-vendor required APICv inhibits with a variable instead of calling into vendor code every time KVM wants to query the set of required inhibits. The required inhibits are a property of the vendor's virtualization architecture, i.e. are 100% static. Using a variable allows the compiler to inline the check, e.g. generate a single-uop TEST+Jcc, and thus eliminates any desire to avoid checking inhibits for performance reasons. No functional change intended. Reviewed-by:
-
Sean Christopherson authored
Turns out that some warnings exist for good reasons. Restore the warning in avic_vcpu_load() that guards against calling avic_vcpu_load() on a running vCPU now that KVM avoids doing so when switching between x2APIC and xAPIC. The entire point of the WARN is to highlight that KVM should not be reloading an AVIC. Opportunistically convert the WARN_ON() to WARN_ON_ONCE() to avoid spamming the kernel if it does fire. This reverts commit c0caeee6. Reviewed-by:
-
Sean Christopherson authored
Drop writes to APIC_RRR, a.k.a. Remote Read Data Register, on AVIC unaccelerated write traps. The register is read-only and isn't emulated by KVM. Sending the register through kvm_apic_write_nodecode() will result in screaming when x2APIC is enabled due to the unexpected failure to retrieve the MSR (KVM expects that only "legal" accesses will trap). Fixes: 4d1d7942 ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Signed-off-by:
-
Sean Christopherson authored
Iterate over all target logical IDs in the AVIC kick fastpath instead of bailing if there is more than one target. Now that KVM inhibits AVIC if vCPUs aren't mapped 1:1 with logical IDs, each bit in the destination is guaranteed to match to at most one vCPU, i.e. iterating over the bitmap is guaranteed to kick each valid target exactly once. Reviewed-by:
-
Sean Christopherson authored
Do not modify AVIC's logical ID table if the logical ID portion of the LDR is not a power-of-2, i.e. if the LDR has multiple bits set. Taking only the first bit means that KVM will fail to match MDAs that intersect with "higher" bits in the "ID" The "ID" acts as a bitmap, but is referred to as an ID because there's an implicit, unenforced "requirement" that software only set one bit. This edge case is arguably out-of-spec behavior, but KVM cleanly handles it in all other cases, e.g. the optimized logical map (and AVIC!) is also disabled in this scenario. Refactor the code to consolidate the checks, and so that the code looks more like avic_kick_target_vcpus_fast(). Fixes: 18f40c53 ("svm: Add VMEXIT handlers for AVIC") Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Update SVM's cache of the LDR even if the new value is "bad". Leaving stale information in the cache can result in KVM missing updates and/or invalidating the wrong entry, e.g. if avic_invalidate_logical_id_entry() is triggered after a different vCPU has "claimed" the old LDR. Fixes: 18f40c53 ("svm: Add VMEXIT handlers for AVIC") Reviewed-by:
-
Sean Christopherson authored
Update the vCPU's local (virtual) APIC on LDR writes even if the write "fails". The APIC needs to recalc the optimized logical map even if the LDR is invalid or zero, e.g. if the guest clears its LDR, the optimized map will be left as is and the vCPU will receive interrupts using its old LDR. Fixes: 18f40c53 ("svm: Add VMEXIT handlers for AVIC") Reviewed-by:
-
Sean Christopherson authored
Inhibit SVM's AVIC if multiple vCPUs are aliased to the same logical ID. Architecturally, all CPUs whose logical ID matches the MDA are supposed to receive the interrupt; overwriting existing entries in AVIC's logical=>physical map can result in missed IPIs. Fixes: 18f40c53 ("svm: Add VMEXIT handlers for AVIC") Reviewed-by:
-
Sean Christopherson authored
Inhibit APICv/AVIC if the optimized physical map is disabled so that KVM KVM provides consistent APIC behavior if xAPIC IDs are aliased due to vcpu_id being truncated and the x2APIC hotplug hack isn't enabled. If the hotplug hack is disabled, events that are emulated by KVM will follow architectural behavior (all matching vCPUs receive events, even if the "match" is due to truncation), whereas APICv and AVIC will deliver events only to the first matching vCPU, i.e. the vCPU that matches without truncation. Note, the "extra" inhibit is needed because KVM deliberately ignores mismatches due to truncation when applying the APIC_ID_MODIFIED inhibit so that large VMs (>255 vCPUs) can run with APICv/AVIC. Reviewed-by:
-
Sean Christopherson authored
Apply KVM's hotplug hack if and only if userspace has enabled 32-bit IDs for x2APIC. If 32-bit IDs are not enabled, disable the optimized map to honor x86 architectural behavior if multiple vCPUs shared a physical APIC ID. As called out in the changelog that added the hack, all CPUs whose (possibly truncated) APIC ID matches the target are supposed to receive the IPI. KVM intentionally differs from real hardware, because real hardware (Knights Landing) does just "x2apic_id & 0xff" to decide whether to accept the interrupt in xAPIC mode and it can deliver one interrupt to more than one physical destination, e.g. 0x123 to 0x123 and 0x23. Applying the hack even when x2APIC is not fully enabled means KVM doesn't correctly handle scenarios where the guest has aliased xAPIC IDs across multiple vCPUs, as only the vCPU with the lowest vCPU ID will receive any interrupts. It's extremely unlikely any real world guest aliases APIC IDs, or even modifies APIC IDs, but KVM's behavior is arbitrary, e.g. the lowest vCPU ID "wins" regardless of which vCPU is "aliasing" and which vCPU is "normal". Furthermore, the hack is _not_ guaranteed to work! The hack works if and only if the optimized APIC map is successfully allocated. If the map allocation fails (unlikely), KVM will fall back to its unoptimized behavior, which _does_ honor the architectural behavior. Pivot on 32-bit x2APIC IDs being enabled as that is required to take advantage of the hotplug hack (see kvm_apic_state_fixup()), i.e. won't break existing setups unless they are way, way off in the weeds. And an entry in KVM's errata to document the hack. Alternatively, KVM could provide an actual x2APIC quirk and document the hack that way, but there's unlikely to ever be a use case for disabling the quirk. Go the errata route to avoid having to validate a quirk no one cares about. Fixes: 5bd5db38 ("KVM: x86: allow hotplug of VCPU with APIC ID over 0xff") Reviewed-by:
-
Sean Christopherson authored
Disable the optimized APIC logical map if multiple vCPUs are aliased to the same logical ID. Architecturally, all CPUs whose logical ID matches the MDA are supposed to receive the interrupt; overwriting existing map entries can result in missed IPIs. Fixes: 1e08ec4a ("KVM: optimize apic interrupt delivery") Signed-off-by:
-
Sean Christopherson authored
Disable the optimized APIC logical map if a logical ID covers multiple MDAs, i.e. if a vCPU has multiple bits set in its ID. In logical mode, events match if "ID & MDA != 0", i.e. creating an entry for only the first bit can cause interrupts to be missed. Note, creating an entry for every bit is also wrong as KVM would generate IPIs for every matching bit. It would be possible to teach KVM to play nice with this edge case, but it is very much an edge case and probably not used in any real world OS, i.e. it's not worth optimizing. Fixes: 1e08ec4a ("KVM: optimize apic interrupt delivery") Signed-off-by:
-
Sean Christopherson authored
Skip the optimized cluster[] setup for x2APIC logical mode, as KVM reuses the optimized map's phys_map[] and doesn't actually need to insert the target apic into the cluster[]. The LDR is derived from the x2APIC ID, and both are read-only in KVM, thus the vCPU's cluster[ldr] is guaranteed to be the same entry as the vCPU's phys_map[x2apic_id] entry. Skipping the unnecessary setup will allow a future fix for aliased xAPIC logical IDs to simply require that cluster[ldr] is non-NULL, i.e. won't have to special case x2APIC. Alternatively, the future check could allow "cluster[ldr] == apic", but that ends up being terribly confusing because cluster[ldr] is only set at the very end, i.e. it's only possible due to x2APIC's shenanigans. Another alternative would be to send x2APIC down a separate path _after_ the calculation and then assert that all of the above, but the resulting code is rather messy, and it's arguably unnecessary since asserting that the actual LDR matches the expected LDR means that simply testing that interrupts are delivered correctly provides the same guarantees. Reported-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by:
-
Sean Christopherson authored
Track all possibilities for the optimized APIC map's logical modes instead of overloading the pseudo-bitmap and treating any "unknown" value as "invalid". As documented by the now-stale comment above the mode values, the values did have meaning when the optimized map was originally added. That dependent logical was removed by commit e45115b6 ("KVM: x86: use physical LAPIC array for logical x2APIC"), but the obfuscated behavior and its comment were left behind. Opportunistically rename "mode" to "logical_mode", partly to make it clear that the "disabled" case applies only to the logical map, but also to prove that there is no lurking code that expects "mode" to be a bitmap. Functionally, this is a glorified nop. Signed-off-by:
-
Sean Christopherson authored
Explicitly skip the optimized map setup if the vCPU's LDR is '0', i.e. if the vCPU will never respond to logical mode interrupts. KVM already skips setup in this case, but relies on kvm_apic_map_get_logical_dest() to generate mask==0. KVM still needs the mask=0 check as a non-zero LDR can yield mask==0 depending on the mode, but explicitly handling the LDR will make it simpler to clean up the logical mode tracking in the future. No functional change intended. Reviewed-by:
-
Sean Christopherson authored
Add a helper to perform the final kick, two instances of the ICR decoding is one too many. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Document that AVIC is inhibited if any vCPU's APIC ID diverges from its vCPU ID, i.e. that there's no need to check for a destination match in the AVIC kick fast path. Opportunistically tweak comments to remove "guest bug", as that suggests KVM is punting on error handling, which is not the case. Targeting a non-existent vCPU or no vCPUs _may_ be a guest software bug, but whether or not it's a guest bug is irrelevant. Such behavior is architecturally legal and thus needs to faithfully emulated by KVM (and it is). Signed-off-by:
-
Sean Christopherson authored
Due to a likely mismerge of patches, KVM ended up with a superfluous commit to "enable" AVIC's fast path for x2AVIC mode. Even worse, the superfluous commit has several bugs and creates a nasty local shadow variable. Rather than fix the bugs piece-by-piece[*] to achieve the same end result, revert the patch wholesale. Opportunistically add a comment documenting the x2AVIC dependencies. This reverts commit 8c9e639d. [*] https://lore.kernel.org/all/YxEP7ZBRIuFWhnYJ@google.com Fixes: 8c9e639d ("KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible") Suggested-by:
-
Suravee Suthikulpanit authored
For X2APIC ID in cluster mode, the logical ID is bit [15:0]. Fixes: 603ccef4 ("KVM: x86: SVM: fix avic_kick_target_vcpus_fast") Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Compute the destination from ICRH using the sender's x2APIC status, not each (potential) target's x2APIC status. Fixes: c514d3a3 ("KVM: SVM: Update avic_kick_target_vcpus to support 32-bit APIC ID") Cc: Li RongQing <lirongqing@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
-
Sean Christopherson authored
Replace the "avic_mode" enum with a single bool to track whether or not x2AVIC is enabled. KVM already has "apicv_enabled" that tracks if any flavor of AVIC is enabled, i.e. AVIC_MODE_NONE and AVIC_MODE_X1 are redundant and unnecessary noise. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Free the APIC access page memslot if any vCPU enables x2APIC and SVM's AVIC is enabled to prevent accesses to the virtual APIC on vCPUs with x2APIC enabled. On AMD, if its "hybrid" mode is enabled (AVIC is enabled when x2APIC is enabled even without x2AVIC support), keeping the APIC access page memslot results in the guest being able to access the virtual APIC page as x2APIC is fully emulated by KVM. I.e. hardware isn't aware that the guest is operating in x2APIC mode. Exempt nested SVM's update of APICv state from the new logic as x2APIC can't be toggled on VM-Exit. In practice, invoking the x2APIC logic should be harmless precisely because it should be a glorified nop, but play it safe to avoid latent bugs, e.g. with dropping the vCPU's SRCU lock. Intel doesn't suffer from the same issue as APICv has fully independent VMCS controls for xAPIC vs. x2APIC virtualization. Technically, KVM should provide bus error semantics and not memory semantics for the APIC page when x2APIC is enabled, but KVM already provides memory semantics in other scenarios, e.g. if APICv/AVIC is enabled and the APIC is hardware disabled (via APIC_BASE MSR). Note, checking apic_access_memslot_enabled without taking locks relies it being set during vCPU creation (before kvm_vcpu_reset()). vCPUs can race to set the inhibit and delete the memslot, i.e. can get false positives, but can't get false negatives as apic_access_memslot_enabled can't be toggled "on" once any vCPU reaches KVM_RUN. Opportunistically drop the "can" while updating avic_activate_vmcb()'s comment, i.e. to state that KVM _does_ support the hybrid mode. Move the "Note:" down a line to conform to preferred kernel/KVM multi-line comment style. Opportunistically update the apicv_update_lock comment, as it isn't actually used to protect apic_access_memslot_enabled (which is protected by slots_lock). Fixes: 0e311d33 ("KVM: SVM: Introduce hybrid-AVIC mode") Signed-off-by:
-
Sean Christopherson authored
Move the APIC access page allocation helper function to common x86 code, the allocation routine is virtually identical between APICv (VMX) and AVIC (SVM). Keep APICv's gfn_to_page() + put_page() sequence, which verifies that a backing page can be allocated, i.e. that the system isn't under heavy memory pressure. Forcing the backing page to be populated isn't strictly necessary, but skipping the effective prefetch only delays the inevitable. Reviewed-by:
-
Sean Christopherson authored
Use KVM_REQ_UPDATE_APICV to react to APIC "mode" changes, i.e. to handle the APIC being hardware enabled/disabled and/or x2APIC being toggled. There is no need to immediately update APICv state, the only requirement is that APICv be updating prior to the next VM-Enter. Making a request will allow piggybacking KVM_REQ_UPDATE_APICV to "inhibit" the APICv memslot when x2APIC is enabled. Doing that directly from kvm_lapic_set_base() isn't feasible as KVM's SRCU must not be held when modifying memslots (to avoid deadlock), and may or may not be held when kvm_lapic_set_base() is called, i.e. KVM can't do the right thing without tracking that is rightly buried behind CONFIG_PROVE_RCU=y. Suggested-by:
-
Sean Christopherson authored
Move the VMCB updates from avic_refresh_apicv_exec_ctrl() into avic_set_virtual_apic_mode() and invert the dependency being said functions to avoid calling avic_vcpu_{load,put}() and avic_set_pi_irte_mode() when "only" setting the virtual APIC mode. avic_set_virtual_apic_mode() is invoked from common x86 with preemption enabled, which makes avic_vcpu_{load,put}() unhappy. Luckily, calling those and updating IRTE stuff is unnecessary as the only reason avic_set_virtual_apic_mode() is called is to handle transitions between xAPIC and x2APIC that don't also toggle APICv activation. And if activation doesn't change, there's no need to fiddle with the physical APIC ID table or update IRTE. The "full" refresh is guaranteed to be called if activation changes in this case as the only call to the "set" path is: kvm_vcpu_update_apicv(vcpu); static_call_cond(kvm_x86_set_virtual_apic_mode)(vcpu); and kvm_vcpu_update_apicv() invokes the refresh if activation changes: if (apic->apicv_active == activate) goto out; apic->apicv_active = activate; kvm_apic_update_apicv(vcpu); static_call(kvm_x86_refresh_apicv_exec_ctrl)(vcpu); Rename the helper to reflect that it is also called during "refresh". WARNING: CPU: 183 PID: 49186 at arch/x86/kvm/svm/avic.c:1081 avic_vcpu_put+0xde/0xf0 [kvm_amd] CPU: 183 PID: 49186 Comm: stable Tainted: G O 6.0.0-smp--fcddbca45f0a-sink #34 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022 RIP: 0010:avic_vcpu_put+0xde/0xf0 [kvm_amd] avic_refresh_apicv_exec_ctrl+0x142/0x1c0 [kvm_amd] avic_set_virtual_apic_mode+0x5a/0x70 [kvm_amd] kvm_lapic_set_base+0x149/0x1a0 [kvm] kvm_set_apic_base+0x8f/0xd0 [kvm] kvm_set_msr_common+0xa3a/0xdc0 [kvm] svm_set_msr+0x364/0x6b0 [kvm_amd] __kvm_set_msr+0xb8/0x1c0 [kvm] kvm_emulate_wrmsr+0x58/0x1d0 [kvm] msr_interception+0x1c/0x30 [kvm_amd] svm_invoke_exit_handler+0x31/0x100 [kvm_amd] svm_handle_exit+0xfc/0x160 [kvm_amd] vcpu_enter_guest+0x21bb/0x23e0 [kvm] vcpu_run+0x92/0x450 [kvm] kvm_arch_vcpu_ioctl_run+0x43e/0x6e0 [kvm] kvm_vcpu_ioctl+0x559/0x620 [kvm] Fixes: 05c4fe8c ("KVM: SVM: Refresh AVIC configuration when changing APIC mode") Cc: stable@vger.kernel.org Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: -
Sean Christopherson authored
Truncate the vcpu_id, a.k.a. x2APIC ID, to an 8-bit value when comparing it against the xAPIC ID to avoid false positives (sort of) on systems with >255 CPUs, i.e. with IDs that don't fit into a u8. The intent of APIC_ID_MODIFIED is to inhibit APICv/AVIC when the xAPIC is changed from it's original value, The mismatch isn't technically a false positive, as architecturally the xAPIC IDs do end up being aliased in this scenario, and neither APICv nor AVIC correctly handles IPI virtualization when there is aliasing. However, KVM already deliberately does not honor the aliasing behavior that results when an x2APIC ID gets truncated to an xAPIC ID. I.e. the resulting APICv/AVIC behavior is aligned with KVM's existing behavior when KVM's x2APIC hotplug hack is effectively enabled. If/when KVM provides a way to disable the hotplug hack, APICv/AVIC can piggyback whatever logic disables the optimized APIC map (which is what provides the hotplug hack), i.e. so that KVM's optimized map and APIC virtualization yield the same behavior. For now, fix the immediate problem of APIC virtualization being disabled for large VMs, which is a much more pressing issue than ensuring KVM honors architectural behavior for APIC ID aliasing. Fixes: 3743c2f0 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base") Reported-by:
-
Sean Christopherson authored
Don't inhibit APICv/AVIC due to an xAPIC ID mismatch if the APIC is hardware disabled. The ID cannot be consumed while the APIC is disabled, and the ID is guaranteed to be set back to the vcpu_id when the APIC is hardware enabled (architectural behavior correctly emulated by KVM). Fixes: 3743c2f0 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base") Cc: stable@vger.kernel.org Reviewed-by:
-
Sean Christopherson authored
Emulate ICR writes on AVIC IPI failures due to invalid targets using the same logic as failures due to invalid types. AVIC acceleration fails if _any_ of the targets are invalid, and crucially VM-Exits before sending IPIs to targets that _are_ valid. In logical mode, the destination is a bitmap, i.e. a single IPI can target multiple logical IDs. Doing nothing causes KVM to drop IPIs if at least one target is valid and at least one target is invalid. Fixes: 18f40c53 ("svm: Add VMEXIT handlers for AVIC") Cc: stable@vger.kernel.org Reviewed-by:
-
Sean Christopherson authored
Flush the TLB when activating AVIC as the CPU can insert into the TLB while AVIC is "locally" disabled. KVM doesn't treat "APIC hardware disabled" as VM-wide AVIC inhibition, and so when a vCPU has its APIC hardware disabled, AVIC is not guaranteed to be inhibited. As a result, KVM may create a valid NPT mapping for the APIC base, which the CPU can cache as a non-AVIC translation. Note, Intel handles this in vmx_set_virtual_apic_mode(). Reviewed-by:
-
Sean Christopherson authored
Purge the "highest ISR" cache when updating APICv state on a vCPU. The cache must not be used when APICv is active as hardware may emulate EOIs (and other operations) without exiting to KVM. This fixes a bug where KVM will effectively block IRQs in perpetuity due to the "highest ISR" never getting reset if APICv is activated on a vCPU while an IRQ is in-service. Hardware emulates the EOI and KVM never gets a chance to update its cache. Fixes: b26a695a ("kvm: lapic: Introduce APICv update helper function") Cc: stable@vger.kernel.org Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by:
-
Sean Christopherson authored
When emulating a x2APIC write in response to an APICv/AVIC trap, get the the written value from the vAPIC page without checking that reads are allowed for the target register. AVIC can generate trap-like VM-Exits on writes to EOI, and so KVM needs to get the written value from the backing page without running afoul of EOI's write-only behavior. Alternatively, EOI could be special cased to always write '0', e.g. so that the sanity check could be preserved, but x2APIC on AMD is actually supposed to disallow non-zero writes (not emulated by KVM), and the sanity check was a byproduct of how the KVM code was written, i.e. wasn't added to guard against anything in particular. Fixes: 70c8327c ("KVM: x86: Bug the VM if an accelerated x2APIC trap occurs on a "bad" reg") Fixes: 1bd9dfec ("KVM: x86: Do not block APIC write for non ICR registers") Reported-by:
Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Cc: stable@vger.kernel.org Reviewed-by:
-
- 11 Jan, 2023 3 commits
-
-
David Woodhouse authored
In commit 14243b38 ("KVM: x86/xen: Add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery") the clever version of me left some helpful notes for those who would come after him: /* * For the irqfd workqueue, using the main kvm->lock mutex is * fine since this function is invoked from kvm_set_irq() with * no other lock held, no srcu. In future if it will be called * directly from a vCPU thread (e.g. on hypercall for an IPI) * then it may need to switch to using a leaf-node mutex for * serializing the shared_info mapping. */ mutex_lock(&kvm->lock); In commit 2fd6df2f ("KVM: x86/xen: intercept EVTCHNOP_send from guests") the other version of me ran straight past that comment without reading it, and introduced a potential deadlock by taking vcpu->mutex and kvm->lock in the wrong order. Solve this as originally suggested, by adding a leaf-node lock in the Xen state rather than using kvm->lock for it. Fixes: 2fd6df2f ("KVM: x86/xen: intercept EVTCHNOP_send from guests") Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20230111180651.14394-4-dwmw2@infradead.org> [Rebase, add docs. - Paolo] Signed-off-by:
-
David Woodhouse authored
Documentation/virt/kvm/locking.rst tells us that kvm->lock is taken outside vcpu->mutex. But that doesn't actually happen very often; it's only in some esoteric cases like migration with AMD SEV. This means that lockdep usually doesn't notice, and doesn't do its job of keeping us honest. Ensure that lockdep *always* knows about the ordering of these two locks, by briefly taking vcpu->mutex in kvm_vm_ioctl_create_vcpu() while kvm->lock is held. Signed-off-by:
-
David Woodhouse authored
The kvm_xen_update_runstate_guest() function can be called when the vCPU is being scheduled out, from a preempt notifier. It *opportunistically* updates the runstate area in the guest memory, if the gfn_to_pfn_cache which caches the appropriate address is still valid. If there is *contention* when it attempts to obtain gpc->lock, then locking inside the priority inheritance checks may cause a deadlock. Lockdep reports: [13890.148997] Chain exists of: &gpc->lock --> &p->pi_lock --> &rq->__lock [13890.149002] Possible unsafe locking scenario: [13890.149003] CPU0 CPU1 [13890.149004] ---- ---- [13890.149005] lock(&rq->__lock); [13890.149007] lock(&p->pi_lock); [13890.149009] lock(&rq->__lock); [13890.149011] lock(&gpc->lock); [13890.149013] *** DEADLOCK *** In the general case, if there's contention for a read lock on gpc->lock, that's going to be because something else is either invalidating or revalidating the cache. Either way, we've raced with seeing it in an invalid state, in which case we would have aborted the opportunistic update anyway. So in the 'atomic' case when called from the preempt notifier, just switch to using read_trylock() and avoid the PI handling altogether. Signed-off-by:
-
