- 12 Nov, 2019 40 commits
-
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit d9d4b1e4 upstream. The syzbot fuzzer found a slab-out-of-bounds write bug in the hid-gaff driver. The problem is caused by the driver's assumption that the device must have an input report. While this will be true for all normal HID input devices, a suitably malicious device can violate the assumption. The same assumption is present in over a dozen other HID drivers. This patch fixes them by checking that the list of hid_inputs for the hid_device is nonempty before allowing it to be used. Reported-and-tested-by: syzbot+403741a091bf41d4ae79@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 84968291 upstream. Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines. Also use an unsigned format specifier in the corresponding debug message. Signed-off-by:
Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@kernel.orgSigned-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 1251dab9 upstream. Fix a user-controlled slab buffer overflow due to a missing sanity check on the bulk-out transfer buffer used for control requests. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 52403cfb upstream. USB control-message timeouts are specified in milliseconds, not jiffies. Waiting 83 minutes for a transfer to complete is a bit excessive. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+a4fbb3bb76cda0ea4e58@syzkaller.appspotmail.com Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit d98ee2a1 upstream. The custom ring-buffer implementation was merged without any locking or explicit memory barriers, but a spinlock was later added by commit 9d33efd9 ("USB: ldusb bugfix"). The lock did not cover the update of the tail index once the entry had been processed, something which could lead to memory corruption on weakly ordered architectures or due to compiler optimisations. Specifically, a completion handler running on another CPU might observe the incremented tail index and update the entry before ld_usb_read() is done with it. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Fixes: 9d33efd9 ("USB: ldusb bugfix") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 54f83b8c upstream. Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that a UDC will crash or hang when trying to handle a non-zero-length usb_request for such an endpoint. Indeed, dummy-hcd gets a divide error when trying to calculate the remainder of a transfer length by the maxpacket value, as discovered by the syzbot fuzzer. Currently the gadget core does not check for endpoints having a maxpacket value of 0. This patch adds a check to usb_ep_enable(), preventing such endpoints from being used. As far as I know, none of the gadget drivers in the kernel tries to create an endpoint with maxpacket = 0, but until now there has been nothing to prevent userspace programs under gadgetfs or configfs from doing it. Signed-off-by:
Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281052370.1485-100000@iolanthe.rowland.orgSigned-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 1186f86a upstream. Commit 3ae62a42 ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190 ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42. Signed-off-by:
Christoph Hellwig <hch@lst.de> Fixes: 3ae62a42 ("UAS: fix alignment of scatter/gather segments") Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.orgSigned-off-by:
-
Takashi Sakamoto authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit f2bbdbcb upstream. A helper function of ALSA bebob driver returns negative value in a function which has a prototype to return unsigned value. This commit fixes it by changing the prototype. Fixes: eb7b3a05 ("ALSA: bebob: Add commands and connections/streams management") Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jpSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit e4648309 upstream. Make sure cached writes are not reordered around open(..., O_TRUNC), with the obvious wrong results. Fixes: 4d99ff8f ("fuse: Turn writeback cache on") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit b24e7598 upstream. If writeback cache is enabled, then writes might get reordered with chmod/chown/utimes. The problem with this is that performing the write in the fuse daemon might itself change some of these attributes. In such case the following sequence of operations will result in file ending up with the wrong mode, for example: int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL); write (fd, "1", 1); fchown (fd, 0, 0); fchmod (fd, 04755); close (fd); This patch fixes this by flushing pending writes before performing chown/chmod/utimes. Reported-by:
Giuseppe Scrivano <gscrivan@redhat.com> Tested-by:
-
Mika Westerberg authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 94379521 ] The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by:
Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit fd47a417 ] The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false. Fixes: 1d427be4 ("USB: legousbtower: fix slab info leak at probe") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Petr Mladek authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit d303de1f ] A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Chuck Lever authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 1047ec86 ] Our client can issue multiple SETCLIENTID operations to the same server in some circumstances. Ensure that calls to nfs4_proc_setclientid() after the first one do not overwrite the previously allocated cl_acceptor string. unreferenced object 0xffff888461031800 (size 32): comm "mount.nfs", pid 2227, jiffies 4294822467 (age 1407.749s) hex dump (first 32 bytes): 6e 66 73 40 6b 6c 69 6d 74 2e 69 62 2e 31 30 31 nfs@klimt.ib.101 35 67 72 61 6e 67 65 72 2e 6e 65 74 00 00 00 00 5granger.net.... backtrace: [<00000000ab820188>] __kmalloc+0x128/0x176 [<00000000eeaf4ec8>] gss_stringify_acceptor+0xbd/0x1a7 [auth_rpcgss] [<00000000e85e3382>] nfs4_proc_setclientid+0x34e/0x46c [nfsv4] [<000000003d9cf1fa>] nfs40_discover_server_trunking+0x7a/0xed [nfsv4] [<00000000b81c3787>] nfs4_discover_server_trunking+0x81/0x244 [nfsv4] [<000000000801b55f>] nfs4_init_client+0x1b0/0x238 [nfsv4] [<00000000977daf7f>] nfs4_set_client+0xfe/0x14d [nfsv4] [<0000000053a68a2a>] nfs4_create_server+0x107/0x1db [nfsv4] [<0000000088262019>] nfs4_remote_mount+0x2c/0x59 [nfsv4] [<00000000e84a2fd0>] legacy_get_tree+0x2d/0x4c [<00000000797e947c>] vfs_get_tree+0x20/0xc7 [<00000000ecabaaa8>] fc_mount+0xe/0x36 [<00000000f15fafc2>] vfs_kern_mount+0x74/0x8d [<00000000a3ff4e26>] nfs_do_root_mount+0x8a/0xa3 [nfsv4] [<00000000d1c2b337>] nfs4_try_mount+0x58/0xad [nfsv4] [<000000004c9bddee>] nfs_fs_mount+0x820/0x869 [nfs] Fixes: f11b2a1c ("nfs4: copy acceptor name from context ... ") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Thomas Bogendoerfer authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit efcb5296 ] Use ARRAY_SIZE to caluculate the top of the o32 stack. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 2abb7d3b ] In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283 to check whether inode_alloc is NULL: if (inode_alloc) When inode_alloc is NULL, it is used on line 287: ocfs2_inode_lock(inode_alloc, &bh, 0); ocfs2_inode_lock_full_nested(inode, ...) struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); Thus, a possible null-pointer dereference may occur. To fix this bug, inode_alloc is checked on line 286. This bug is found by a static analysis tool STCheck written by us. Link: http://lkml.kernel.org/r/20190726033717.32359-1-baijiaju1990@gmail.comSigned-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 56e94ea1 ] In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to check whether loc->xl_entry is NULL: if (loc->xl_entry) When loc->xl_entry is NULL, it is used on line 2158: ocfs2_xa_add_entry(loc, name_hash); loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash); loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size); and line 2164: ocfs2_xa_add_namevalue(loc, xi); loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len); loc->xl_entry->xe_name_len = xi->xi_name_len; Thus, possible null-pointer dereferences may occur. To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry() abnormally returns with -EINVAL. These bugs are found by a static analysis tool STCheck written by us. [akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()] Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.comSigned-off-by:
-
Dave Young authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 2ecb7402 ] kexec reboot fails randomly in UEFI based KVM guest. The firmware just resets while calling efi_delete_dummy_variable(); Unfortunately I don't know how to debug the firmware, it is also possible a potential problem on real hardware as well although nobody reproduced it. The intention of the efi_delete_dummy_variable is to trigger garbage collection when entering virtual mode. But SetVirtualAddressMap can only run once for each physical reboot, thus kexec_enter_virtual_mode() is not necessarily a good place to clean a dummy object. Drop the efi_delete_dummy_variable so that kexec reboot can work. Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Matthew Garrett <mjg59@google.com> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott Talbert <swt@techie.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-integrity@vger.kernel.org Link: https://lkml.kernel.org/r/20191002165904.8819-8-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 6fb9367a ] The CPER parser assumes that the class code is big endian, but at least on this edk2-derived Intel Purley platform it's little endian: efi: EFI v2.50 by EDK II BIOS ID:PLYDCRB1.86B.0119.R05.1701181843 DMI: Intel Corporation PURLEY/PURLEY, BIOS PLYDCRB1.86B.0119.R05.1701181843 01/18/2017 {1}[Hardware Error]: device_id: 0000:5d:00.0 {1}[Hardware Error]: slot: 0 {1}[Hardware Error]: secondary_bus: 0x5e {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2030 {1}[Hardware Error]: class_code: 000406 ^^^^^^ (should be 060400) Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Adam Ford authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 37e3ab00 ] When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL. Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.comSigned-off-by:
-
Austin Kim authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit dd19c106 ] After 'Initial git repository build' commit, 'mapping_table_ERRHRD' variable has not been used. So 'mapping_table_ERRHRD' const variable could be removed to mute below warning message: fs/cifs/netmisc.c:120:40: warning: unused variable 'mapping_table_ERRHRD' [-Wunused-const-variable] static const struct smb_to_posix_error mapping_table_ERRHRD[] = { ^ Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit b66f31ef ] This patch fixes the lock inversion complaint: ============================================ WARNING: possible recursive locking detected 5.3.0-rc7-dbg+ #1 Not tainted -------------------------------------------- kworker/u16:6/171 is trying to acquire lock: 00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm] but task is already holding lock: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&id_priv->handler_mutex); lock(&id_priv->handler_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u16:6/171: #0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] stack backtrace: CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x8a/0xd6 __lock_acquire.cold+0xe1/0x24d lock_acquire+0x106/0x240 __mutex_lock+0x12e/0xcb0 mutex_lock_nested+0x1f/0x30 rdma_destroy_id+0x78/0x4a0 [rdma_cm] iw_conn_req_handler+0x5c9/0x680 [rdma_cm] cm_work_handler+0xe62/0x1100 [iw_cm] process_one_work+0x56d/0xac0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 This is not a bug as there are actually two lock classes here. Link: https://lore.kernel.org/r/20190930231707.48259-3-bvanassche@acm.org Fixes: de910bd9 ("RDMA/cma: Simplify locking needed for serialization of callbacks") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Steve MacLean authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit ee212d6e ] Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new entry. If a new map overlaps a previous map, the overlapped section of the previous map is effectively unmapped, but the non-overlapping sections are still valid. maps__fixup_overlappings() is responsible for creating any new map entries from the previously overlapped map. It optionally creates a before and an after map. When creating the after map the existing code failed to adjust the map.pgoff. This meant the new after map would incorrectly calculate the file offset for the ip. This results in incorrect symbol name resolution for any ip in the after region. Make maps__fixup_overlappings() correctly populate map.pgoff. Add an assert that new mapping matches old mapping at the beginning of the after map. Committer-testing: Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9 (which didn't strip symbols). Preparation: ~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol cd perfSymbol ~/dotnet3.0-preview9/dotnet publish perf record ~/dotnet3.0-preview9/dotnet \ bin/Debug/netcoreapp3.0/publish/perfSymbol.dll ^C Before: perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.705249: 250000 cpu-clock: \ 7fe6159a1f99 [unknown] \ (.../3.0.0-preview9-19423-09/libcoreclr.so) After: perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\ grep libcoreclr.so | head -n 4 dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \ r-xp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \ [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \ rwxp .../3.0.0-preview9-19423-09/libcoreclr.so All the [unknown] symbols were resolved. Signed-off-by:
Steve MacLean <Steve.MacLean@Microsoft.com> Tested-by:
Brian Robbins <brianrob@microsoft.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Cc: John Keeping <john@metanate.com> Cc: John Salem <josalem@microsoft.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom McDonald <thomas.mcdonald@microsoft.com> Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Pascal Bouwmann authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 6c59a962 ] The center temperature of the supported devices stored in the constant BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees. It seems that some datasheets were inconsistent on this value leading to the error. For most usecases will only make minor difference so not queued for stable. Signed-off-by:
Pascal Bouwmann <bouwmann@tau-tec.de> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit b5372fe5 ] Commit 8099b047 ("exec: load_script: don't blindly truncate shebang string") was trying to protect against a confused exec of a truncated interpreter path. However, it was overeager and also refused to truncate arguments as well, which broke userspace, and it was reverted. This attempts the protection again, but allows arguments to remain truncated. In an effort to improve readability, helper functions and comments have been added. Co-developed-by:
Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Samuel Dionne-Riel <samuel@dionne-riel.com> Cc: Richard Weinberger <richard.weinberger@gmail.com> Cc: Graham Christensen <graham@grahamc.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Jan-Marek Glogowski authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 4fdc1790 ] On plug-in of my USB-C device, its USB_SS_PORT_LS_SS_INACTIVE link state bit is set. Greping all the kernel for this bit shows that the port status requests a warm-reset this way. This just happens, if its the only device on the root hub, the hub therefore resumes and the HCDs status_urb isn't yet available. If a warm-reset request is detected, this sets the hubs event_bits, which will prevent any auto-suspend and allows the hubs workqueue to warm-reset the port later in port_event. Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Acked-by:
-
Brian Norris authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit ff64dd48 ] git-diff-index does not refresh the index for you, so using it for a "-dirty" check can give misleading results. Commit 6147b1cf ("scripts/setlocalversion: git: Make -dirty check more robust") tried to fix this by switching to git-status, but it overlooked the fact that git-status also writes to the .git directory of the source tree, which is definitely not kosher for an out-of-tree (O=) build. That is getting reverted. Fortunately, git-status now supports avoiding writing to the index via the --no-optional-locks flag, as of git 2.14. It still calculates an up-to-date index, but it avoids writing it out to the .git directory. So, let's retry the solution from commit 6147b1cf using this new flag first, and if it fails, we assume this is an older version of git and just use the old git-diff-index method. It's hairy to get the 'grep -vq' (inverted matching) correct by stashing the output of git-status (you have to be careful about the difference betwen "empty stdin" and "blank line on stdin"), so just pipe the output directly to grep and use a regex that's good enough for both the git-status and git-diff-index version. Cc: Christian Kujau <lists@nerdbynature.de> Cc: Guenter Roeck <linux@roeck-us.net> Suggested-by:
Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Genki Sky <sky@genki.is> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Kan Liang authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 00ae831d ] Add the Atom Tremont model number to the Intel family list. [ Tony: Also update comment at head of file to say "_X" suffix is also used for microserver parts. ] Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Megha Dey <megha.dey@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190125195902.17109-4-tony.luck@intel.comSigned-off-by:
-
Phil Elwell authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 30ec514d ] The SC16IS752 has an Enhanced Feature Register which is aliased at the same address as the Interrupt Identification Register; accessing it requires that a magic value is written to the Line Configuration Register. If an interrupt is raised while the EFR is mapped in then the ISR won't be able to access the IIR, leading to the "Unexpected interrupt" error messages. Avoid the problem by claiming a mutex around accesses to the EFR register, also claiming the mutex in the interrupt handler work item (this is equivalent to disabling interrupts to interlock against a non-threaded interrupt handler). See: https://github.com/raspberrypi/linux/issues/2529Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
-
Kent Overstreet authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit d3775354 ] mempool_init()/bioset_init() require that the mempools/biosets be zeroed first; they probably should not _require_ this, but not allocating those structs with kzalloc is a fairly nonsensical thing to do (calling mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal and safe, but only works if said memory was zeroed.) Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit b2155578 ] Commit 721b1d98 ("dm snapshot: Fix excessive memory usage and workqueue stalls") introduced a semaphore to limit the maximum number of in-flight kcopyd (COW) jobs. The implementation of this throttling mechanism is prone to a deadlock: 1. One or more threads write to the origin device causing COW, which is performed by kcopyd. 2. At some point some of these threads might reach the s->cow_count semaphore limit and block in down(&s->cow_count), holding a read lock on _origins_lock. 3. Someone tries to acquire a write lock on _origins_lock, e.g., snapshot_ctr(), which blocks because the threads at step (2) already hold a read lock on it. 4. A COW operation completes and kcopyd runs dm-snapshot's completion callback, which ends up calling pending_complete(). pending_complete() tries to resubmit any deferred origin bios. This requires acquiring a read lock on _origins_lock, which blocks. This happens because the read-write semaphore implementation gives priority to writers, meaning that as soon as a writer tries to enter the critical section, no readers will be allowed in, until all writers have completed their work. So, pending_complete() waits for the writer at step (3) to acquire and release the lock. This writer waits for the readers at step (2) to release the read lock and those readers wait for pending_complete() (the kcopyd thread) to signal the s->cow_count semaphore: DEADLOCK. The above was thoroughly analyzed and documented by Nikos Tsironis as part of his initial proposal for fixing this deadlock, see: https://www.redhat.com/archives/dm-devel/2019-October/msg00001.html Fix this deadlock by reworking COW throttling so that it waits without holding any locks. Add a variable 'in_progress' that counts how many kcopyd jobs are running. A function wait_for_in_progress() will sleep if 'in_progress' is over the limit. It drops _origins_lock in order to avoid the deadlock. Reported-by:
Guruswamy Basavaiah <guru2018@gmail.com> Reported-by:
Nikos Tsironis <ntsironis@arrikto.com> Reviewed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit a2f83e8b ] This simple refactoring moves code for modifying the semaphore cow_count into separate functions to prepare for changes that will extend these methods to provide for a more sophisticated mechanism for COW throttling. Signed-off-by:
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit ae1093be ] The rw_semaphore is acquired for read only in two places, neither is performance-critical. So replace it with a mutex -- which is more efficient. Signed-off-by:
-
Bjørn Mork authored
BugLink: https://launchpad.net/bugs/1851347 The driver will forward errors to userspace after turning most of them into -EIO. But all status codes are not equal. The -EPIPE (stall) in particular can be seen more as a result of normal USB signaling than an actual error. The state is automatically cleared by the USB core without intervention from either driver or userspace. And most devices and firmwares will never trigger a stall as a result of GetEncapsulatedResponse. This is in fact a requirement for CDC WDM devices. Quoting from section 7.1 of the CDC WMC spec revision 1.1: The function shall not return STALL in response to GetEncapsulatedResponse. But this driver is also handling GetEncapsulatedResponse on behalf of the qmi_wwan and cdc_mbim drivers. Unfortunately the relevant specs are not as clear wrt stall. So some QMI and MBIM devices *will* occasionally stall, causing the GetEncapsulatedResponse to return an -EPIPE status. Translating this into -EIO for userspace has proven to be harmful. Treating it as an empty read is safer, making the driver behave as if the device was conforming to the CDC WDM spec. There have been numerous reports of issues related to -EPIPE errors from some newer CDC MBIM devices in particular, like for example the Fibocom L831-EAU. Testing on this device has shown that the issues go away if we simply ignore the -EPIPE status. Similar handling of -EPIPE is already known from e.g. usb_get_string() The -EPIPE log message is still kept to let us track devices with this unexpected behaviour, hoping that it attracts attention from firmware developers. Cc: <stable@vger.kernel.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100938Reported-and-tested-by:
Christian Ehrig <christian.ehrig@mediamarktsaturn-bt.com> Reported-and-tested-by:
Patrick Chilton <chpatrick@gmail.com> Reported-and-tested-by:
Andreas Böhler <news@aboehler.at> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by:
AceLan Kao <acelan.kao@canonical.com> Acked-by:
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1850454 Ignore: yes Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1850454Signed-off-by:
-
Greg KH authored
BugLink: https://bugs.launchpad.net/bugs/1850454 commit 3840c5b7 upstream. Nicolas pointed out that the cxgb4 driver is doing dma off of the stack, which is generally considered a very bad thing. On some architectures it could be a security problem, but odds are none of them actually run this driver, so it's just a "normal" bug. Resolve this by allocating the memory for a message off of the heap instead of the stack. kmalloc() always will give us a proper memory location that DMA will work correctly from. Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.comReported-by:
Nicolas Waisman <nico@semmle.com> Tested-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1850454 commit 98c8f125 upstream. Via u32_change(), TCA_U32_SEL has an unspecified type in the netlink policy, so max length isn't enforced, only minimum. This means nkeys (from userspace) was being trusted without checking the actual size of nla_len(), which could lead to a memory over-read, and ultimately an exposure via a call to u32_dump(). Reachability is CAP_NET_ADMIN within a namespace. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1850454 commit 45144d42 upstream. There is an arbitrary difference between the system resume and runtime resume code paths for PCI devices regarding the delay to apply when switching the devices from D3cold to D0. Namely, pci_restore_standard_config() used in the runtime resume code path calls pci_set_power_state() which in turn invokes __pci_start_power_transition() to power up the device through the platform firmware and that function applies the transition delay (as per PCI Express Base Specification Revision 2.0, Section 6.6.1). However, pci_pm_default_resume_early() used in the system resume code path calls pci_power_up() which doesn't apply the delay at all and that causes issues to occur during resume from suspend-to-idle on some systems where the delay is required. Since there is no reason for that difference to exist, modify pci_power_up() to follow pci_set_power_state() more closely and invoke __pci_start_power_transition() from there to call the platform firmware to power up the device (in case that's necessary). Fixes: db288c9c ("PCI / PM: restore the original behavior of pci_set_power_state()") Reported-by:
Daniel Drake <drake@endlessm.com> Tested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1850454 commit 3d5c1a03 upstream. xenvif_connect_data() calls module_put() in case of error. This is wrong as there is no related module_get(). Remove the superfluous module_put(). Fixes: 279f438e ("xen-netback: Don't destroy the netdev until the vif is shut down") Cc: <stable@vger.kernel.org> # 3.12 Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Paul Durrant <paul@xen.org> Reviewed-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
