- 03 Feb, 2023 4 commits
-
-
Lucas Segarra Fernandez authored
The ZLIB format (RFC 1950) is made of deflate compressed data surrounded by a header and a footer. The QAT accelerators support only the deflate algorithm, therefore the header and the footer need to be inserted in software. This adds logic in the QAT driver to support the ZLIB format. In particular: * Generalize the function qat_comp_alg_compress_decompress() to allow skipping an initial region (header) of the source and/or destination scatter lists. * Add logic to register the qat_zlib_deflate algorithm into the acomp framework. * For ZLIB compression, skip the initial portion of the destination buffer before sending the job to the QAT accelerator and insert the ZLIB header and footer in the callback, after the QAT request has been processed. * For ZLIB decompression, parse the header in the input buffer provided by the user and verify its validity before attempting the decompression of the buffer with QAT. Then submit the buffer to QAT for decompression. In the callback verify the correctness of the footer by comparing the value of the ADLER produced by QAT with the one in the destination buffer. Signed-off-by:Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com> Reviewed-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Lucas Segarra Fernandez authored
Extend qat_bl_sgl_to_bufl() to allow skipping the mapping of a region of the source and the destination scatter lists starting from byte zero. This is to support the ZLIB format (RFC 1950) in the qat driver. The ZLIB format is made of deflate compressed data surrounded by a header and a footer. The QAT accelerators support only the deflate algorithm, therefore the header should not be mapped since it is inserted in software. Signed-off-by:
-
Herbert Xu authored
Revert "crypto: rsa-pkcs1pad - Replace GFP_ATOMIC with GFP_KERNEL in pkcs1pad_encrypt_sign_complete" This reverts commit 1ca28098. While the akcipher API as a whole is designed to be called only from thread context, its completion path is still called from softirq context as usual. Therefore we must not use GFP_KERNEL on that path. Signed-off-by:
-
Peter Lafreniere authored
Currently the ecb/cbc macros hold fpu context unnecessarily when using scalar cipher routines (e.g. when handling odd sizes of blocks per walk). Change the macros to drop fpu context as soon as the fpu is out of use. No performance impact found (on Intel Haswell). Signed-off-by:
Peter Lafreniere <peter@n8pjl.ca> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
- 27 Jan, 2023 12 commits
-
-
Herbert Xu authored
The engine parameter should not be marked for kernel doc as it triggers a warning. Signed-off-by: -
Herbert Xu authored
As it is xts only handles the special return value of EINPROGRESS, which means that in all other cases it will free data related to the request. However, as the caller of xts may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: 8083b1bf ("crypto: xts - add support for ciphertext stealing") Signed-off-by:
-
Herbert Xu authored
Instead of calling the base completion function directly, use the correct ahash helper which is ahash_request_complete. Signed-off-by:
Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by:
-
Herbert Xu authored
Instead of doing saving and restoring on the AEAD request object for fallback processing, use a subrequest instead. Signed-off-by: -
Herbert Xu authored
Previously the child skcipher request was stored on the stack and therefore needed to be zeroed. As it is now dynamically allocated we no longer need to do so. Signed-off-by: -
ye xingchen authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
-
Yang Yingliang authored
aspeed_acry_akcipher_algs is only used in aspeed-acry.c now, change it to static. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Andrew Jeffery <andrew@aj.id.au> Reviewed-by:
Neal Liu <neal_liu@aspeedtech.com> Signed-off-by:
-
Vladis Dronov authored
According to FIPS 140-3 IG, section D.R "Hash Functions Acceptable for Use in the SP 800-90A DRBGs", modules certified after May 16th, 2023 must not support the use of: SHA-224, SHA-384, SHA512-224, SHA512-256, SHA3-224, SHA3-384. Disallow HMAC and HASH DRBGs using SHA-384 in FIPS mode. Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Reviewed-by:
Stephan Müller <smueller@chronox.de> Signed-off-by:
-
Jia Jie Ho authored
This adds driver support for the hardware random number generator in Starfive SoCs and adds StarFive TRNG entry to MAINTAINERS. Co-developed-by:
Jenny Zhang <jenny.zhang@starfivetech.com> Signed-off-by:
Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by:
-
Jia Jie Ho authored
Add documentation to describe Starfive true random number generator module. Co-developed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Tom Lendacky authored
Add a new MODULE_FIRMWARE() entry for 4th generation EPYC processors. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Tom Lendacky authored
Add comments next to the version data MMIO register values to identify the register name being used. Signed-off-by:
-
- 20 Jan, 2023 14 commits
-
-
Taehee Yoo authored
The minimum version of binutils for kernel build is currently 2.23 and it doesn't support GFNI. So, it fails to build the aria-avx512 if the old binutils is used. aria-avx512 requires GFNI, so it should not be allowed to build if the old binutils is used. The AS_AVX512 and AS_GFNI are added to the Kconfig to disable build aria-avx512 if the old binutils is used. Fixes: c970d420 ("crypto: x86/aria - implement aria-avx512") Reported-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
The minimum version of binutils for kernel build is currently 2.23 and it doesn't support GFNI. So, it fails to build the aria-avx2 if the old binutils is used. The code using GFNI is an optional part of aria-avx2. So, it disables GFNI part in it when the old binutils is used. Fixes: 37d8d3ae ("crypto: x86/aria - implement aria-avx2") Reported-by:
-
Taehee Yoo authored
The minimum version of binutils for kernel build is currently 2.23 and it doesn't support GFNI. So, it fails to build the aria-avx if the old binutils is used. The code using GFNI is an optional part of aria-avx. So, it disables GFNI part in it when the old binutils is used. In order to check whether the using binutils is supporting GFNI or not, AS_GFNI is added. Fixes: ba3579e6 ("crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher") Reported-by:
-
Herbert Xu authored
As it is seqiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of seqiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: 0a270321 ("[CRYPTO] seqiv: Add Sequence Number IV Generator") Signed-off-by:
-
Herbert Xu authored
As it is essiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of essiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. Fixes: be1eb7f7 ("crypto: essiv - create wrapper template...") Signed-off-by:
-
Lukas Bulwahn authored
Defines prefixed with "CONFIG" should be limited to proper Kconfig options, that are introduced in a Kconfig file. Here, a definition for the driver's configuration zone is named CONFIG_ZONE. Rename this local definition to CONFIGURATION_ZONE to avoid defines prefixed with "CONFIG". No functional change. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Meadhbh Fitzpatrick authored
Fix spelling mistakes from 'bufer' to 'buffer' in qat_common. Also fix indentation issue caused by the spelling change. Signed-off-by:
Meadhbh Fitzpatrick <meadhbh.fitzpatrick@intel.com> Reviewed-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by:
-
Lukas Bulwahn authored
While reviewing dependencies in some Kconfig files, I noticed the redundant dependency "depends on PCI && PCI_MSI". The config PCI_MSI has always, since its introduction, been dependent on the config PCI. So, it is sufficient to just depend on PCI_MSI, and know that the dependency on PCI is implicitly implied. Reduce the dependencies of configs CRYPTO_DEV_HISI_SEC2, CRYPTO_DEV_HISI_QM, CRYPTO_DEV_HISI_ZIP and CRYPTO_DEV_HISI_HPRE. No functional change and effective change of Kconfig dependendencies. Signed-off-by:
Weili Qian <qianweili@huawei.com> Signed-off-by:
-
Linus Walleij authored
When reading or writing crypto buffers the inner loops can be replaced with readsl and writesl which will on ARM result in a tight assembly loop, speeding up encryption/decryption a little bit. This optimization was in the Ux500 driver so let's carry it over to the STM32 driver. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Lionel Debieve <lionel.debieve@foss.st.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Zero-length arrays are deprecated[1] and we are moving towards adopting C99 flexible-array members instead. So, replace zero-length array declaration in struct aspeed_sham_ctx with flex-array member. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [2]. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1] Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2] Link: https://github.com/KSPP/linux/issues/78Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Koba Ko authored
The following warning appears during the CCP module re-initialization: [ 140.965403] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:07.1/0000:03:00.2/dma/dma0chan0' [ 140.975736] CPU: 0 PID: 388 Comm: kworker/0:2 Kdump: loaded Not tainted 6.2.0-0.rc2.18.eln124.x86_64 #1 [ 140.985185] Hardware name: HPE ProLiant DL325 Gen10/ProLiant DL325 Gen10, BIOS A41 07/17/2020 [ 140.993761] Workqueue: events work_for_cpu_fn [ 140.998151] Call Trace: [ 141.000613] <TASK> [ 141.002726] dump_stack_lvl+0x33/0x46 [ 141.006415] sysfs_warn_dup.cold+0x17/0x23 [ 141.010542] sysfs_create_dir_ns+0xba/0xd0 [ 141.014670] kobject_add_internal+0xba/0x260 [ 141.018970] kobject_add+0x81/0xb0 [ 141.022395] device_add+0xdc/0x7e0 [ 141.025822] ? complete_all+0x20/0x90 [ 141.029510] __dma_async_device_channel_register+0xc9/0x130 [ 141.035119] dma_async_device_register+0x19e/0x3b0 [ 141.039943] ccp_dmaengine_register+0x334/0x3f0 [ccp] [ 141.045042] ccp5_init+0x662/0x6a0 [ccp] [ 141.049000] ? devm_kmalloc+0x40/0xd0 [ 141.052688] ccp_dev_init+0xbb/0xf0 [ccp] [ 141.056732] ? __pci_set_master+0x56/0xd0 [ 141.060768] sp_init+0x70/0x90 [ccp] [ 141.064377] sp_pci_probe+0x186/0x1b0 [ccp] [ 141.068596] local_pci_probe+0x41/0x80 [ 141.072374] work_for_cpu_fn+0x16/0x20 [ 141.076145] process_one_work+0x1c8/0x380 [ 141.080181] worker_thread+0x1ab/0x380 [ 141.083953] ? __pfx_worker_thread+0x10/0x10 [ 141.088250] kthread+0xda/0x100 [ 141.091413] ? __pfx_kthread+0x10/0x10 [ 141.095185] ret_from_fork+0x2c/0x50 [ 141.098788] </TASK> [ 141.100996] kobject_add_internal failed for dma0chan0 with -EEXIST, don't try to register things with the same name in the same directory. [ 141.113703] ccp 0000:03:00.2: ccp initialization failed The /dma/dma0chan0 sysfs file is not removed since dma_chan object has been released in ccp_dma_release() before releasing dma device. A correct procedure would be: release dma channels first => unregister dma device => release ccp dma object. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216888 Fixes: 68dbe80f ("crypto: ccp - Release dma channels before dmaengine unrgister") Tested-by:
Koba Ko <koba.ko@canonical.com> Reviewed-by:
-
Ard Biesheuvel authored
The AEAD documentation conflates associated data and authentication tags: the former (along with the ciphertext) is authenticated by the latter. Fix the doc accordingly. Signed-off-by:
-
Ard Biesheuvel authored
RFC4106 wraps AES in GCM mode, and can be used with larger key sizes than 128/160 bits, just like AES itself. So add these to the tcrypt recipe so they will be benchmarked as well. Signed-off-by:
-
Ard Biesheuvel authored
Add support for RFC4106 ESP encapsulation to the accelerated GCM implementation. This results in a ~10% speedup for IPsec frames of typical size (~1420 bytes) on Cortex-A53. Signed-off-by:
-
- 18 Jan, 2023 1 commit
-
-
Herbert Xu authored
Revert the changes that added p10-aes-gcm: 0781bbd7 ("crypto: p10-aes-gcm - A perl script to process PowerPC assembler source") 41a6437a ("crypto: p10-aes-gcm - Supporting functions for ghash") 3b47ecca ("crypto: p10-aes-gcm - Supporting functions for AES") ca68a96c ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation") cc40379b ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation") 3c657e86 ("crypto: p10-aes-gcm - Update Kconfig and Makefile") These changes fail to build in many configurations and are not ready for prime time. Signed-off-by:
-
- 13 Jan, 2023 9 commits
-
-
Samuel Holland authored
At least the D1 variant requires a separate clock for the TRNG. Without this clock enabled, reading from /dev/hwrng reports: sun8i-ce 3040000.crypto: DMA timeout for TRNG (tm=96) on flow 3 Experimentation shows that the necessary clock is the SoC's internal RC oscillator. This makes sense, as noise from the oscillator can be used as a source of entropy. Signed-off-by:
Samuel Holland <samuel@sholland.org> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Samuel Holland authored
D1 has a crypto engine similar to the one in other Allwinner SoCs. Like H6, it has a separate MBUS clock gate. It also requires the internal RC oscillator to be enabled for the TRNG to return data, presumably because noise from the oscillator is used as an entropy source. This is likely the case for earlier variants as well, but it really only matters for H616 and newer SoCs, as H6 provides no way to disable the internal oscillator. Signed-off-by:
-
Neal Liu authored
Add device tree binding documentation for the Aspeed Advanced High-Performance Bus (AHB) Controller. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Neal Liu authored
Add device tree binding documentation for the Aspeed ECDSA/RSA ACRY Engines Controller. Signed-off-by:
-
Neal Liu authored
Add acry & ahbc node to device tree for AST2600. Signed-off-by:
-
Neal Liu authored
ACRY Engine is designed to accelerate the throughput of ECDSA/RSA signature and verification. This patch aims to add ACRY RSA engine driver for hardware acceleration. Signed-off-by:
-
Ard Biesheuvel authored
The skcipher walk API implementation avoids scatterwalk_map() for mapping the source and destination buffers, and invokes kmap_atomic() directly if the buffer in question is not in low memory (which can only happen on 32-bit architectures). This avoids some overhead on 64-bit architectures, and most notably, permits the skcipher code to run with preemption enabled. Now that scatterwalk_map() has been updated to use kmap_local(), none of this is needed, so we can simply use scatterwalk_map/unmap instead. Signed-off-by:
-
Danny Tsen authored
Signed-off-by:
Danny Tsen <dtsen@linux.ibm.com> Signed-off-by:
-
Danny Tsen authored
This perl code is taken from the OpenSSL project and added gcm_init_htable function used in the p10-aes-gcm-glue.c code to initialize hash table. gcm_hash_p8 is used to hash encrypted data blocks. Signed-off-by:
-
