- 02 Mar, 2023 1 commit
-
-
David Vernet authored
In commit 66e3a13e ("bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr"), the bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() kfuncs were added to BPF. These kfuncs included doxygen headers, but unfortunately those headers are not properly formatted according to [0], and causes the following warnings during the docs build: ./kernel/bpf/helpers.c:2225: warning: \ Excess function parameter 'returns' description in 'bpf_dynptr_slice' ./kernel/bpf/helpers.c:2303: warning: \ Excess function parameter 'returns' description in 'bpf_dynptr_slice_rdwr' ... This patch fixes those doxygen comments. [0]: https://docs.kernel.org/doc-guide/kernel-doc.html#function-documentation Fixes: 66e3a13e ("bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr") Signed-off-by:
David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230301194910.602738-1-void@manifault.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
- 01 Mar, 2023 22 commits
-
-
Andrii Nakryiko authored
Eduard Zingerman says: ==================== This patch allows to specify program flags and multiple verifier log messages for the test_loader kind of tests. For example: tools/testing/selftets/bpf/progs/foobar.c: SEC("tc") __success __log_level(7) __msg("first message") __msg("next message") __flag(BPF_F_ANY_ALIGNMENT) int buz(struct __sk_buff *skb) { ... } It was developed by Andrii Nakryiko ([1]), I reused it in a "test_verifier tests migration to inline assembly" patch series ([2]), but the series is currently stuck on my side. Andrii asked to spin this particular patch separately ([3]). [1] https://lore.kernel.org/bpf/CAEf4BzZH0ZxorCi7nPDbRqSK9f+410RooNwNJGwfw8=0a5i1nw@mail.gmail.com/ [2] https://lore.kernel.org/bpf/20230123145148.2791939-1-eddyz87@gmail.com/ [3] https://lore.kernel.org/bpf/20230123145148.2791939-1-eddyz87@gmail.com/T/#m52e806c5a679a2aa8f484d011be7ec105939127a ==================== Signed-off-by:Andrii Nakryiko <andrii@kernel.org>
-
Andrii Nakryiko authored
Extend __flag attribute by allowing to specify one of the following: * BPF_F_STRICT_ALIGNMENT * BPF_F_ANY_ALIGNMENT * BPF_F_TEST_RND_HI32 * BPF_F_TEST_STATE_FREQ * BPF_F_SLEEPABLE * BPF_F_XDP_HAS_FRAGS * Some numeric value Extend __msg attribute by allowing to specify multiple exepcted messages. All messages are expected to be present in the verifier log in the order of application. Signed-off-by:
Eduard Zingerman <eddyz87@gmail.com> Signed-off-by:
-
Andrii Nakryiko authored
Viktor Malik says: ==================== Fixing several issues reported by Coverity and Clang Static Analyzer (scan-build) for libbpf, mostly removing unnecessary symbols and assignments. No functional changes should be introduced. ==================== Signed-off-by: -
Viktor Malik authored
Clang Static Analyser (scan-build) reports some unused symbols and dead assignments in the linker_append_elf_relos function. Clean these up. Signed-off-by:
Viktor Malik <vmalik@redhat.com> Signed-off-by:
-
Viktor Malik authored
Clang Static Analyzer (scan-build) reports several dead assignments in libbpf where the assigned value is unconditionally overridden by another value before it is read. Remove these assignments. Signed-off-by:
-
Viktor Malik authored
Coverity reports that the first check of 'err' in bpf_object__init_maps is always false as 'err' is initialized to 0 at that point. Remove the unnecessary ternary operator. Signed-off-by:
-
Tiezhu Yang authored
If target is bpf, there is no __loongarch__ definition, __BITS_PER_LONG defaults to 32, __NR_nanosleep is not defined: #if defined(__ARCH_WANT_TIME32_SYSCALLS) || __BITS_PER_LONG != 32 #define __NR_nanosleep 101 __SC_3264(__NR_nanosleep, sys_nanosleep_time32, sys_nanosleep) #endif Work around this problem, by explicitly setting __BITS_PER_LONG to __loongarch_grlen which is defined by compiler as 64 for LA64. This is similar with commit 36e70b9b ("selftests, bpf: Fix broken riscv build"). Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
-
Alexei Starovoitov authored
Kumar Kartikeya Dwivedi says: ==================== This set adds support for kptrs in percpu hashmaps, percpu LRU hashmaps, and local storage maps (covering sk, cgrp, task, inode). Tests are expanded to test more existing maps at runtime and also test the code path for the local storage maps (which is shared by all implementations). A question for reviewers is what the position of the BPF runtime should be on dealing with reference cycles that can be created by BPF programs at runtime using this additional support. For instance, one can store the kptr of the task in its own task local storage, creating a cycle which prevents destruction of task local storage. Cycles can be formed using arbitrarily long kptr ownership chains. Therefore, just preventing storage of such kptrs in some maps is not a sufficient solution, and is more likely to hurt usability. There is precedence in existing runtimes which promise memory safety, like Rust, where reference cycles and memory leaks are permitted. However, traditionally the safety guarantees of BPF have been stronger. Thus, more discussion and thought is invited on this topic to ensure we cover all usage aspects. Changelog: ---------- v2 -> v3 v2: https://lore.kernel.org/bpf/20230221200646.2500777-1-memxor@gmail.com/ * Fix a use-after-free bug in local storage patch * Fix selftest for aarch64 (don't use fentry/fmod_ret) * Wait for RCU Tasks Trace GP along with RCU GP in selftest v1 -> v2 v1: https://lore.kernel.org/bpf/20230219155249.1755998-1-memxor@gmail.com * Simplify selftests, fix a couple of bugs ==================== Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Firstly, ensure programs successfully load when using all of the supported maps. Then, extend existing tests to test more cases at runtime. We are currently testing both the synchronous freeing of items and asynchronous destruction when map is freed, but the code needs to be adjusted a bit to be able to also accomodate support for percpu maps. We now do a delete on the item (and update for array maps which has a similar effect for kptrs) to perform a synchronous free of the kptr, and test destruction both for the synchronous and asynchronous deletion. Next time the program runs, it should observe the refcount as 1 since all existing references should have been released by then. By running the program after both possible paths freeing kptrs, we establish that they correctly release resources. Next, we augment the existing test to also test the same code path shared by all local storage maps using a task local storage map. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20230225154010.391965-4-memxor@gmail.comSigned-off-by:
-
Kumar Kartikeya Dwivedi authored
Enable support for kptrs in local storage maps by wiring up the freeing of these kptrs from map value. Freeing of bpf_local_storage_map is only delayed in case there are special fields, therefore bpf_selem_free_* path can also only dereference smap safely in that case. This is recorded using a bool utilizing a hole in bpF_local_storage_elem. It could have been tagged in the pointer value smap using the lowest bit (since alignment > 1), but since there was already a hole I went with the simpler option. Only the map structure freeing is delayed using RCU barriers, as the buckets aren't used when selem is being freed, so they can be freed once all readers of the bucket lists can no longer access it. Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: KP Singh <kpsingh@kernel.org> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Enable support for kptrs in percpu BPF hashmap and percpu BPF LRU hashmap by wiring up the freeing of these kptrs from percpu map elements. Signed-off-by:
-
Alexei Starovoitov authored
Joanne Koong says: ==================== This patchset is the 2nd in the dynptr series. The 1st can be found here [0]. This patchset adds skb and xdp type dynptrs, which have two main benefits for packet parsing: * allowing operations on sizes that are not statically known at compile-time (eg variable-sized accesses). * more ergonomic and less brittle iteration through data (eg does not need manual if checking for being within bounds of data_end) When comparing the differences in runtime for packet parsing without dynptrs vs. with dynptrs, there is no noticeable difference. Patch 9 contains more details as well as examples of how to use skb and xdp dynptrs. [0] https://lore.kernel.org/bpf/20220523210712.3641569-1-joannelkoong@gmail.com/ --- Changelog: v12 = https://lore.kernel.org/bpf/20230226085120.3907863-1-joannelkoong@gmail.com/ v12 -> v13: * Fix missing { } for case statement v11 = https://lore.kernel.org/bpf/20230222060747.2562549-1-joannelkoong@gmail.com/ v11 -> v12: * Change constant mem size checking to use "__szk" kfunc annotation for slices * Use autoloading for success selftests v10 = https://lore.kernel.org/bpf/20230216225524.1192789-1-joannelkoong@gmail.com/ v10 -> v11: * Reject bpf_dynptr_slice_rdwr() for non-writable progs at load time instead of runtime * Add additional patch (__uninit kfunc annotation) * Expand on documentation * Add bpf_dynptr_write() calls for persisting writes in tests v9 = https://lore.kernel.org/bpf/20230127191703.3864860-1-joannelkoong@gmail.com/ v9 -> v10: * Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr interface * Add some more tests * Split up patchset into more parts to make it easier to review v8 = https://lore.kernel.org/bpf/20230126233439.3739120-1-joannelkoong@gmail.com/ v8 -> v9: * Fix dynptr_get_type() to check non-stack dynptrs v7 = https://lore.kernel.org/bpf/20221021011510.1890852-1-joannelkoong@gmail.com/ v7 -> v8: * Change helpers to kfuncs * Add 2 new patches (1/5 and 2/5) v6 = https://lore.kernel.org/bpf/20220907183129.745846-1-joannelkoong@gmail.com/ v6 -> v7 * Change bpf_dynptr_data() to return read-only data slices if the skb prog is read-only (Martin) * Add test "skb_invalid_write" to test that writes to rd-only data slices are rejected v5 = https://lore.kernel.org/bpf/20220831183224.3754305-1-joannelkoong@gmail.com/ v5 -> v6 * Address kernel test robot errors by static inlining v4 = https://lore.kernel.org/bpf/20220822235649.2218031-1-joannelkoong@gmail.com/ v4 -> v5 * Address kernel test robot errors for configs w/out CONFIG_NET set * For data slices, return PTR_TO_MEM instead of PTR_TO_PACKET (Kumar) * Split selftests into subtests (Andrii) * Remove insn patching. Use rdonly and rdwr protos for dynptr skb construction (Andrii) * bpf_dynptr_data() returns NULL for rd-only dynptrs. There will be a separate bpf_dynptr_data_rdonly() added later (Andrii and Kumar) v3 = https://lore.kernel.org/bpf/20220822193442.657638-1-joannelkoong@gmail.com/ v3 -> v4 * Forgot to commit --amend the kernel test robot error fixups v2 = https://lore.kernel.org/bpf/20220811230501.2632393-1-joannelkoong@gmail.com/ v2 -> v3 * Fix kernel test robot build test errors v1 = https://lore.kernel.org/bpf/20220726184706.954822-1-joannelkoong@gmail.com/ v1 -> v2 * Return data slices to rd-only skb dynptrs (Martin) * bpf_dynptr_write allows writes to frags for skb dynptrs, but always invalidates associated data slices (Martin) * Use switch casing instead of ifs (Andrii) * Use 0xFD for experimental kind number in the selftest (Zvi) * Put selftest conversions w/ dynptrs into new files (Alexei) * Add new selftest "test_cls_redirect_dynptr.c" ==================== Signed-off-by: -
Joanne Koong authored
Test skb and xdp dynptr functionality in the following ways: 1) progs/test_cls_redirect_dynptr.c * Rewrite "progs/test_cls_redirect.c" test to use dynptrs to parse skb data * This is a great example of how dynptrs can be used to simplify a lot of the parsing logic for non-statically known values. When measuring the user + system time between the original version vs. using dynptrs, and averaging the time for 10 runs (using "time ./test_progs -t cls_redirect"): original version: 0.092 sec with dynptrs: 0.078 sec 2) progs/test_xdp_dynptr.c * Rewrite "progs/test_xdp.c" test to use dynptrs to parse xdp data When measuring the user + system time between the original version vs. using dynptrs, and averaging the time for 10 runs (using "time ./test_progs -t xdp_attach"): original version: 0.118 sec with dynptrs: 0.094 sec 3) progs/test_l4lb_noinline_dynptr.c * Rewrite "progs/test_l4lb_noinline.c" test to use dynptrs to parse skb data When measuring the user + system time between the original version vs. using dynptrs, and averaging the time for 10 runs (using "time ./test_progs -t l4lb_all"): original version: 0.062 sec with dynptrs: 0.081 sec For number of processed verifier instructions: original version: 6268 insns with dynptrs: 2588 insns 4) progs/test_parse_tcp_hdr_opt_dynptr.c * Add sample code for parsing tcp hdr opt lookup using dynptrs. This logic is lifted from a real-world use case of packet parsing in katran [0], a layer 4 load balancer. The original version "progs/test_parse_tcp_hdr_opt.c" (not using dynptrs) is included here as well, for comparison. When measuring the user + system time between the original version vs. using dynptrs, and averaging the time for 10 runs (using "time ./test_progs -t parse_tcp_hdr_opt"): original version: 0.031 sec with dynptrs: 0.045 sec 5) progs/dynptr_success.c * Add test case "test_skb_readonly" for testing attempts at writes on a prog type with read-only skb ctx. * Add "test_dynptr_skb_data" for testing that bpf_dynptr_data isn't supported for skb progs. 6) progs/dynptr_fail.c * Add test cases "skb_invalid_data_slice{1,2,3,4}" and "xdp_invalid_data_slice{1,2}" for testing that helpers that modify the underlying packet buffer automatically invalidate the associated data slice. * Add test cases "skb_invalid_ctx" and "xdp_invalid_ctx" for testing that prog types that do not support bpf_dynptr_from_skb/xdp don't have access to the API. * Add test case "dynptr_slice_var_len{1,2}" for testing that variable-sized len can't be passed in to bpf_dynptr_slice * Add test case "skb_invalid_slice_write" for testing that writes to a read-only data slice are rejected by the verifier. * Add test case "data_slice_out_of_bounds_skb" for testing that writes to an area outside the slice are rejected. * Add test case "invalid_slice_rdwr_rdonly" for testing that prog types that don't allow writes to packet data don't accept any calls to bpf_dynptr_slice_rdwr. [0] https://github.com/facebookincubator/katran/blob/main/katran/lib/bpf/pckt_parsing.hSigned-off-by:Joanne Koong <joannelkoong@gmail.com> Acked-by:
-
Joanne Koong authored
Two new kfuncs are added, bpf_dynptr_slice and bpf_dynptr_slice_rdwr. The user must pass in a buffer to store the contents of the data slice if a direct pointer to the data cannot be obtained. For skb and xdp type dynptrs, these two APIs are the only way to obtain a data slice. However, for other types of dynptrs, there is no difference between bpf_dynptr_slice(_rdwr) and bpf_dynptr_data. For skb type dynptrs, the data is copied into the user provided buffer if any of the data is not in the linear portion of the skb. For xdp type dynptrs, the data is copied into the user provided buffer if the data is between xdp frags. If the skb is cloned and a call to bpf_dynptr_data_rdwr is made, then the skb will be uncloned (see bpf_unclone_prologue()). Please note that any bpf_dynptr_write() automatically invalidates any prior data slices of the skb dynptr. This is because the skb may be cloned or may need to pull its paged buffer into the head. As such, any bpf_dynptr_write() will automatically have its prior data slices invalidated, even if the write is to data in the skb head of an uncloned skb. Please note as well that any other helper calls that change the underlying packet buffer (eg bpf_skb_pull_data()) invalidates any data slices of the skb dynptr as well, for the same reasons. Signed-off-by:
-
Joanne Koong authored
Add xdp dynptrs, which are dynptrs whose underlying pointer points to a xdp_buff. The dynptr acts on xdp data. xdp dynptrs have two main benefits. One is that they allow operations on sizes that are not statically known at compile-time (eg variable-sized accesses). Another is that parsing the packet data through dynptrs (instead of through direct access of xdp->data and xdp->data_end) can be more ergonomic and less brittle (eg does not need manual if checking for being within bounds of data_end). For reads and writes on the dynptr, this includes reading/writing from/to and across fragments. Data slices through the bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() should be used. For examples of how xdp dynptrs can be used, please see the attached selftests. Signed-off-by:
-
Joanne Koong authored
Add skb dynptrs, which are dynptrs whose underlying pointer points to a skb. The dynptr acts on skb data. skb dynptrs have two main benefits. One is that they allow operations on sizes that are not statically known at compile-time (eg variable-sized accesses). Another is that parsing the packet data through dynptrs (instead of through direct access of skb->data and skb->data_end) can be more ergonomic and less brittle (eg does not need manual if checking for being within bounds of data_end). For bpf prog types that don't support writes on skb data, the dynptr is read-only (bpf_dynptr_write() will return an error) For reads and writes through the bpf_dynptr_read() and bpf_dynptr_write() interfaces, reading and writing from/to data in the head as well as from/to non-linear paged buffers is supported. Data slices through the bpf_dynptr_data API are not supported; instead bpf_dynptr_slice() and bpf_dynptr_slice_rdwr() (added in subsequent commit) should be used. For examples of how skb dynptrs can be used, please see the attached selftests. Signed-off-by:
-
Joanne Koong authored
This patch adds __uninit as a kfunc annotation. This will be useful for scenarios such as for example in dynptrs, indicating whether the dynptr should be checked by the verifier as an initialized or an uninitialized dynptr. Without this annotation, the alternative would be needing to hard-code in the verifier the specific kfunc to indicate that arg should be treated as an uninitialized arg. Signed-off-by:
-
Joanne Koong authored
This commit refactors the logic for determining which register in a function is the dynptr into "get_dynptr_arg_reg". This will be used in the future when the dynptr reg for BPF_FUNC_dynptr_write will need to be obtained in order to support writes for skb dynptrs. Signed-off-by:
-
Joanne Koong authored
Some bpf dynptr functions will be called from places where if CONFIG_BPF_SYSCALL is not set, then the dynptr function is undefined. For example, when skb type dynptrs are added in the next commit, dynptr functions are called from net/core/filter.c This patch defines no-op implementations of these dynptr functions so that they do not break compilation by being an undefined reference. Signed-off-by:
-
Joanne Koong authored
This change allows kfuncs to take in an uninitialized dynptr as a parameter. Before this change, only helper functions could successfully use uninitialized dynptrs. This change moves the memory access check (including stack state growing and slot marking) into process_dynptr_func(), which both helpers and kfuncs call into. Signed-off-by:
-
Joanne Koong authored
This change cleans up process_dynptr_func's flow to be more intuitive and updates some comments with more context. Signed-off-by:
-
Joanne Koong authored
The bpf mirror of the in-kernel sk_buff and xdp_buff data structures are __sk_buff and xdp_md. Currently, when we pass in the program ctx to a kfunc where the program ctx is a skb or xdp buffer, we reject the program if the in-kernel definition is sk_buff/xdp_buff instead of __sk_buff/xdp_md. This change allows "sk_buff <--> __sk_buff" and "xdp_buff <--> xdp_md" to be recognized as valid matches. The user program may pass in their program ctx as a __sk_buff or xdp_md, and the in-kernel definition of the kfunc may define this arg as a sk_buff or xdp_buff. Signed-off-by:
-
- 28 Feb, 2023 4 commits
-
-
Jose E. Marchesi authored
[Changes from V4: - s/regs:16/regs:8 in figure.] [Changes from V3: - Back to src_reg and dst_reg, since they denote register numbers as opposed to the values stored in these registers.] [Changes from V2: - Use src and dst consistently in the document. - Use a more graphical depiction of the 128-bit instruction. - Remove `Where:' fragment. - Clarify that unused bits are reserved and shall be zeroed.] [Changes from V1: - Use rst literal blocks for figures. - Avoid using | in the basic instruction/pseudo instruction figure. - Rebased to today's bpf-next master branch.] This patch modifies instruction-set.rst so it documents the encoding of BPF instructions in terms of how the bytes are stored (be it in an ELF file or as bytes in a memory buffer to be loaded into the kernel or some other BPF consumer) as opposed to how the instruction looks like once loaded. This is hopefully easier to understand by implementors looking to generate and/or consume bytes conforming BPF instructions. The patch also clarifies that the unused bytes in a pseudo-instruction shall be cleared with zeros. Signed-off-by:
Jose E. Marchesi <jose.marchesi@oracle.com> Acked-by:
Yonghong Song <yhs@fb.com> Acked-by:
-
David Vernet authored
In commit 332ea1f6 ("bpf: Add bpf_cgroup_from_id() kfunc"), a new bpf_cgroup_from_id() kfunc was added which allows a BPF program to lookup and acquire a reference to a cgroup from a cgroup id. The commit's doxygen comment seems to have copy-pasted fields, which causes BPF kfunc helper documentation to fail to render: <snip>/helpers.c:2114: warning: Excess function parameter 'cgrp'... <snip>/helpers.c:2114: warning: Excess function parameter 'level'... <snip> <snip>/helpers.c:2114: warning: Excess function parameter 'level'... This patch fixes the doxygen header. Fixes: 332ea1f6 ("bpf: Add bpf_cgroup_from_id() kfunc") Signed-off-by:
-
Jiaxun Yang authored
For R4000 erratas around multiplication and division instructions, as our use of those instructions are always followed by mflo/mfhi instructions, the only issue we need care is "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0" Errata 28: "A double-word or a variable shift may give an incorrect result if executed while an integer multiplication is in progress." We just emit a mfhi $0 to ensure the operation is completed after every multiplication instruction according to workaround suggestion in the document. Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/bpf/20230228113305.83751-3-jiaxun.yang@flygoat.com
-
Jiaxun Yang authored
For DADDI errata we just workaround by disable immediate operation for BPF_ADD / BPF_SUB to avoid generation of DADDIU. All other use cases in JIT won't cause overflow thus they are all safe. Signed-off-by:
-
- 27 Feb, 2023 7 commits
-
-
Yonghong Song authored
Commit 04d58f1b("libbpf: add API to get XDP/XSK supported features") added feature_flags to struct bpf_xdp_query_opts. If a user uses bpf_xdp_query_opts with feature_flags member, the bpf_xdp_query() will check whether 'netdev' family exists or not in the kernel. If it does not exist, the bpf_xdp_query() will return -ENOENT. But 'netdev' family does not exist in old kernels as it is introduced in the same patch set as Commit 04d58f1b. So old kernel with newer libbpf won't work properly with bpf_xdp_query() api call. To fix this issue, if the return value of libbpf_netlink_resolve_genl_family_id() is -ENOENT, bpf_xdp_query() will just return 0, skipping the rest of xdp feature query. This preserves backward compatibility. Fixes: 04d58f1b ("libbpf: add API to get XDP/XSK supported features") Signed-off-by:
-
Ilya Leoshkevich authored
Replace the short informal description with the proper doc comments. Suggested-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
Puranjay Mohan authored
The syscall register definitions for ARM in bpf_tracing.h doesn't define the fifth parameter for the syscalls. Because of this some KPROBES based selftests fail to compile for ARM architecture. Define the fifth parameter that is passed in the R5 register (uregs[4]). Fixes: 3a95c42d ("libbpf: Define arm syscall regs spec in bpf_tracing.h") Signed-off-by:
Puranjay Mohan <puranjay12@gmail.com> Signed-off-by:
-
Rong Tao authored
Commit bc292ab0("mm: introduce vma->vm_flags wrapper functions") turns the vm_flags into a const variable. Added bpf_find_vma test in commit f108662b("selftests/bpf: Add tests for bpf_find_vma") to assign values to variables that declare const in find_vma_fail1.c programs, which is an error to the compiler and does not test BPF verifiers. It is better to replace 'const vm_flags_t vm_flags' with 'unsigned long vm_start' for testing. $ make -C tools/testing/selftests/bpf/ -j8 ... progs/find_vma_fail1.c:16:16: error: cannot assign to non-static data member 'vm_flags' with const-qualified type 'const vm_flags_t' (aka 'const unsigned long') vma->vm_flags |= 0x55; ~~~~~~~~~~~~~ ^ ../tools/testing/selftests/bpf/tools/include/vmlinux.h:1898:20: note: non-static data member 'vm_flags' declared const here const vm_flags_t vm_flags; ~~~~~~~~~~~`~~~~~~^~~~~~~~ Signed-off-by:
Rong Tao <rongtao@cestc.cn> Signed-off-by:
-
Luis Gerhorst authored
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid two-character escape sequences. This does not include \', which is not required in JSON because it exclusively uses double quotes as string separators. Solidus (/) may be escaped, but does not have to. Only reverse solidus (\), double quotes ("), and the control characters have to be escaped. Therefore, with this fix, bpftool correctly supports all valid two-character escape sequences (but still does not support characters that require multi-character escape sequences). Witout this fix, attempting to load a JSON file generated by bpftool using Python 3.10.6's default json.load() may fail with the error "Invalid \escape" if the file contains the invalid escaped single quote (\'). Fixes: b66e907c ("tools: bpftool: copy JSON writer from iproute2 repository") Signed-off-by:Luis Gerhorst <gerhorst@cs.fau.de> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de
-
Tiezhu Yang authored
After commit 80d7da1c ("asm-generic: Drop getrlimit and setrlimit syscalls from default list"), new architectures won't need to include getrlimit and setrlimit, they are superseded with prlimit64. In order to maintain compatibility for the new architectures, such as LoongArch which does not define __NR_getrlimit, it is better to use __NR_prlimit64 instead of __NR_getrlimit in user_ringbuf test to fix the following build error: TEST-OBJ [test_progs] user_ringbuf.test.o tools/testing/selftests/bpf/prog_tests/user_ringbuf.c: In function 'kick_kernel_cb': tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: error: '__NR_getrlimit' undeclared (first use in this function) 593 | syscall(__NR_getrlimit); | ^~~~~~~~~~~~~~ tools/testing/selftests/bpf/prog_tests/user_ringbuf.c:593:17: note: each undeclared identifier is reported only once for each function it appears in make: *** [Makefile:573: tools/testing/selftests/bpf/user_ringbuf.test.o] Error 1 make: Leaving directory 'tools/testing/selftests/bpf' Signed-off-by:
-
Tiezhu Yang authored
LoongArch provides struct user_pt_regs instead of struct pt_regs to userspace, use struct user_pt_regs to define __PT_REGS_CAST() to fix the following build error: CLNG-BPF [test_maps] loop1.bpf.o progs/loop1.c:22:9: error: incomplete definition of type 'struct pt_regs' m = PT_REGS_RC(ctx); ^~~~~~~~~~~~~~~ tools/testing/selftests/bpf/tools/include/bpf/bpf_tracing.h:493:41: note: expanded from macro 'PT_REGS_RC' #define PT_REGS_RC(x) (__PT_REGS_CAST(x)->__PT_RC_REG) ~~~~~~~~~~~~~~~~~^ tools/testing/selftests/bpf/tools/include/bpf/bpf_helper_defs.h:20:8: note: forward declaration of 'struct pt_regs' struct pt_regs; ^ 1 error generated. make: *** [Makefile:572: tools/testing/selftests/bpf/loop1.bpf.o] Error 1 make: Leaving directory 'tools/testing/selftests/bpf' Signed-off-by:
-
- 25 Feb, 2023 3 commits
-
-
Martin KaFai Lau authored
Hangbin Liu says: ==================== As Martin suggested, let's move the SYS() macro to test_progs.h since a lot of programs are using it. After that, let's run mptcp in a dedicated netns to avoid user config influence. v3: fix fd redirect typo. Move SYS() macro into the test_progs.h v2: remove unneed close_cgroup_fd goto label. ==================== Signed-off-by:Martin KaFai Lau <martin.lau@kernel.org>
-
Hangbin Liu authored
The current mptcp test is run in init netns. If the user or default system config disabled mptcp, the test will fail. Let's run the mptcp test in a dedicated netns to avoid none kernel default mptcp setting. Suggested-by:
Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230224061343.506571-3-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
A lot of tests defined SYS() macro to run system calls with goto label. Let's move this macro to test_progs.h and add configurable "goto_label" as the first arg. Suggested-by:
-
- 23 Feb, 2023 2 commits
-
-
Tejun Heo authored
Add a test case for bpf_cgroup_from_id. Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/Y/bBlt+tPozcQgws@slm.duckdns.orgSigned-off-by:
-
Tejun Heo authored
cgroup ID is an userspace-visible 64bit value uniquely identifying a given cgroup. As the IDs are used widely, it's useful to be able to look up the matching cgroups. Add bpf_cgroup_from_id(). v2: Separate out selftest into its own patch as suggested by Alexei. Signed-off-by:
-
- 22 Feb, 2023 1 commit
-
-
Dave Thaler authored
Document the discussion from the email thread on the IETF bpf list, where it was explained that the raw format varies by endianness of the processor. Signed-off-by:
Dave Thaler <dthaler@microsoft.com> Acked-by:
-
