- 26 Apr, 2024 40 commits
-
-
Aurabindo Pillai authored
define new gfx12 uapi flags Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Aurabindo Pillai authored
Add GFX12 swizzle mode definitions for use with DCN401 Signed-off-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
Add some missing HDCP registers to be used in DCN35. Signed-off-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Jack Xiao authored
Update ADD_QUEUE interface for mes11 to support mes mapping legacy queue. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Reviewed-by:
-
Jesse Zhang authored
Converting size from size_t to int may overflow. v2: keep reverse xmas tree order (Christian) Signed-off-by:
Jesse Zhang <jesse.zhang@amd.com> Reviewed-by:
-
Jack Xiao authored
Add mes mapping legacy queue framework support. Signed-off-by:
-
Tim Huang authored
Clear warning that uses uninitialized value fw_size. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
This commit address some small code style issues in DC. Signed-off-by:
-
Rodrigo Siqueira authored
This commit reorganizes the order in which some control registers are presented to make it easier to identify the operations based on the hardware doc. Signed-off-by:
-
Rodrigo Siqueira authored
This commit removes some unnecessary code and makes the required adjustments to replace other parts of the code with a short option. Signed-off-by:
-
Sunil Khatri authored
Do not dump the ip registers during driver reload in passthrough environment. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Arunpravin Paneer Selvam authored
Now we have two flags for contiguous VRAM buffer allocation. If the application request for AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS, it would set the ttm place TTM_PL_FLAG_CONTIGUOUS flag in the buffer's placement function. This patch will change the default behaviour of the two flags. When we set AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS - This means contiguous is not mandatory. - we will try to allocate the contiguous buffer. Say if the allocation fails, we fallback to allocate the individual pages. When we setTTM_PL_FLAG_CONTIGUOUS - This means contiguous allocation is mandatory. - we are setting this in amdgpu_bo_pin_restricted() before bo validation and check this flag in the vram manager file. - if this is set, we should allocate the buffer pages contiguously. the allocation fails, we return -ENOSPC. v2: - keep the mem_flags and bo->flags check as is(Christian) - place the TTM_PL_FLAG_CONTIGUOUS flag setting into the amdgpu_bo_pin_restricted function placement range iteration loop(Christian) - rename find_pages with amdgpu_vram_mgr_calculate_pages_per_block (Christian) - Keep the kernel BO allocation as is(Christain) - If BO pin vram allocation failed, we need to return -ENOSPC as RDMA cannot work with scattered VRAM pages(Philip) v3(Christian): - keep contiguous flag handling outside of pages_per_block calculation - remove the hacky implementation in contiguous flag error handling code v4(Christian): - use any variable and return value for non-contiguous fallback v5: rebase to amd-staging-drm-next branch Signed-off-by:Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Suggested-by:
-
Alex Hung authored
This fixes 29 UNINIT issues reported by Coverity. Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
-
Alex Hung authored
This fixes 49 UNINIT issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
This fixes 11 UNINIT issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
This fixes 1 PW.INCLUDE_RECURSION reported by Coverity. "./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_types.h" includes itself: dc_types.h -> dal_types.h -> dc_types.h Acked-by:
-
Alex Hung authored
[WHY] find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns an array index and they return -1 when not found; however, -1 is not a valid index number. [HOW] When this happens, call ASSERT(), and return a positive number (which is fewer than callers' array size) instead. This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
[WHY] resource_stream_to_stream_idx returns an array index and it return -1 when not found; however, -1 is not a valid array index number. [HOW] When this happens, call ASSERT(), and return a zero instead. This fixes an OVERRUN and an NEGATIVE_RETURNS issues reported by Coverity. Reviewed-by:
-
Hersen Wu authored
[WHY] &mode_lib->mp.Watermark and &locals->Watermark are the same address. memcpy may lead to unexpected behavior. [HOW] memmove should be used. Reviewed-by:
-
Alex Hung authored
[WHY] ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it also means it is uninitialized and does not need free audio. [HOW] Skip and return NULL. This fixes 2 OVERRUN issues reported by Coverity. Reviewed-by:
-
Alex Hung authored
pipe_ctx has a size of MAX_PIPES so checking its index before accessing the array. This fixes an OVERRUN issue reported by Coverity. Reviewed-by:
-
Lancelot SIX authored
There are new control registers introduced in gfx10 used to configure hardware watchpoints triggered by SMEM instructions: SQ_WATCH{0,1,2,3}_{CNTL_ADDR_HI,ADDR_L}. Those registers work in a similar way as the TCP_WATCH* registers currently used for gfx9 and above. This patch adds support to program the SQ_WATCH registers for gfx10. The SQ_WATCH?_CNTL.MASK field has one bit more than TCP_WATCH?_CNTL.MASK, so SQ watchpoints can have a finer granularity than TCP_WATCH watchpoints. In this patch, we keep the capabilities advertised to the debugger unchanged (HSA_DBG_WATCH_ADDR_MASK_*_BIT_GFX10) as this reflects what both TCP and SQ watchpoints can do and both watchpoints are configured together. Signed-off-by:Lancelot SIX <lancelot.six@amd.com> Reviewed-by:
Jonathan Kim <jonathan.kim@amd.com> Signed-off-by:
-
Alex Hung authored
[WHAT] msg_id is used as an array index and it cannot be a negative value, and therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1). [HOW] Check whether msg_id is valid before reading and setting. This fixes 4 OVERRUN issues reported by Coverity. Reviewed-by:
-
Srinivasan Shanmugam authored
The function gfx_v9_4_3_init_microcode in gfx_v9_4_3.c was generating about potential truncation of output when using the snprintf function. The issue was due to the size of the buffer 'ucode_prefix' being too small to accommodate the maximum possible length of the string being written into it. The string being written is "amdgpu/%s_mec.bin" or "amdgpu/%s_rlc.bin", where %s is replaced by the value of 'chip_name'. The length of this string without the %s is 16 characters. The warning message indicated that 'chip_name' could be up to 29 characters long, resulting in a total of 45 characters, which exceeds the buffer size of 30 characters. To resolve this issue, the size of the 'ucode_prefix' buffer has been reduced from 30 to 15. This ensures that the maximum possible length of the string being written into the buffer will not exceed its size, thus preventing potential buffer overflow and truncation issues. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c: In function ‘gfx_v9_4_3_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~ ...... 439 | r = gfx_v9_4_3_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:379:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 379 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~ ...... 443 | r = gfx_v9_4_3_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c:413:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 413 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: 86301129 ("drm/amdgpu: split gc v9_4_3 functionality from gc v9_0") Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by:
-
Hersen Wu authored
[Why & How] Check return pointer of kzalloc before using it. Reviewed-by:
-
George Shen authored
Theoretically rare corner case where ceil(Y) results in rounding up to an integer. If this happens, the 1 should be carried over to the X value. CC: stable@vger.kernel.org Reviewed-by:
George Shen <george.shen@amd.com> Tested-by:
-
YiPeng Chai authored
Fix ras mode2 reset failure in ras aca mode. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Bob Zhou authored
In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages will be run many times so that double free err_addr in some special case. So set the err_addr to NULL to avoid the warnings. Signed-off-by:
Bob Zhou <bob.zhou@amd.com> Acked-by:
-
Jesse Zhang authored
The parameter "last_jump_jiffies" should be initialized before being used in the function atom_op_jump. Signed-off-by:
-
Jesse Zhang authored
Check if ring is not a mes queue before freeing the wb entry, because we only allocate a wb entry when it's not a mes queue. Signed-off-by:
-
Bob Zhou authored
After amdgpu_i2c_get_byte fail, amdgpu_i2c_put_byte shouldn't be conducted to put wrong value. So return and check the i2c transfer result. Signed-off-by:
-
Bob Zhou authored
if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should be stop to avoid out-of-bounds read, so directly return -EINVAL. Signed-off-by:
Le Ma <le.ma@amd.com> Signed-off-by:
-
Ma Jun authored
Initialize the interrupt timestamp for some legacy SOCs to fix the coverity issue "Uninitialized scalar variable" Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Suggested-by:
-
YiPeng Chai authored
Use new interface to reserve bad page. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
YiPeng Chai authored
retired_page is page frame and should be expanded to the full address when querying status. Signed-off-by:
-
Harish Kasiviswanathan authored
Queue buffer, though it is in system memory, has to be created using the correct amdgpu device. Enforce this as the BO needs to mapped to the GART for MES Hardware scheduler to access it. Signed-off-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
Headless dp 2.0 will take longer to update. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
-
Rodrigo Siqueira authored
This commit add some missing HDMI control registers to DCN3x. Signed-off-by:
-
YiPeng Chai authored
support ACA logging ecc errors. Signed-off-by:
-
YiPeng Chai authored
Add poison consumption handler. Signed-off-by:
-
